Source code
Revision control
Copy as Markdown
Other Tools
/*
* Copyright (c) 2018, Alliance for Open Media. All rights reserved.
*
* This source code is subject to the terms of the BSD 2 Clause License and
* the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
* was not distributed with this source code in the LICENSE file, you can
* obtain it at www.aomedia.org/license/software. If the Alliance for Open
* Media Patent License 1.0 was not distributed with this source code in the
* PATENTS file, you can obtain it at www.aomedia.org/license/patent.
*/
#include <immintrin.h> // AVX2
#include "aom_dsp/x86/mem_sse2.h"
#include "aom_dsp/x86/synonyms.h"
#include "aom_dsp/x86/synonyms_avx2.h"
#include "aom_dsp/x86/transpose_sse2.h"
#include "config/av1_rtcd.h"
#include "av1/common/restoration.h"
#include "av1/encoder/pickrst.h"
#if CONFIG_AV1_HIGHBITDEPTH
static inline void acc_stat_highbd_avx2(int64_t *dst, const uint16_t *dgd,
const __m256i *shuffle,
const __m256i *dgd_ijkl) {
// Load two 128-bit chunks from dgd
const __m256i s0 = _mm256_inserti128_si256(
_mm256_castsi128_si256(_mm_loadu_si128((__m128i *)dgd)),
_mm_loadu_si128((__m128i *)(dgd + 4)), 1);
// s0 = [11 10 9 8 7 6 5 4] [7 6 5 4 3 2 1 0] as u16 (values are dgd indices)
// The weird order is so the shuffle stays within 128-bit lanes
// Shuffle 16x u16 values within lanes according to the mask:
// [0 1 1 2 2 3 3 4] [0 1 1 2 2 3 3 4]
// (Actually we shuffle u8 values as there's no 16-bit shuffle)
const __m256i s1 = _mm256_shuffle_epi8(s0, *shuffle);
// s1 = [8 7 7 6 6 5 5 4] [4 3 3 2 2 1 1 0] as u16 (values are dgd indices)
// Multiply 16x 16-bit integers in dgd_ijkl and s1, resulting in 16x 32-bit
// integers then horizontally add pairs of these integers resulting in 8x
// 32-bit integers
const __m256i d0 = _mm256_madd_epi16(*dgd_ijkl, s1);
// d0 = [a b c d] [e f g h] as u32
// Take the lower-half of d0, extend to u64, add it on to dst (H)
const __m256i d0l = _mm256_cvtepu32_epi64(_mm256_extracti128_si256(d0, 0));
// d0l = [a b] [c d] as u64
const __m256i dst0 = yy_load_256(dst);
yy_store_256(dst, _mm256_add_epi64(d0l, dst0));
// Take the upper-half of d0, extend to u64, add it on to dst (H)
const __m256i d0h = _mm256_cvtepu32_epi64(_mm256_extracti128_si256(d0, 1));
// d0h = [e f] [g h] as u64
const __m256i dst1 = yy_load_256(dst + 4);
yy_store_256(dst + 4, _mm256_add_epi64(d0h, dst1));
}
static inline void acc_stat_highbd_win7_one_line_avx2(
const uint16_t *dgd, const uint16_t *src, int h_start, int h_end,
int dgd_stride, const __m256i *shuffle, int32_t *sumX,
int32_t sumY[WIENER_WIN][WIENER_WIN], int64_t M_int[WIENER_WIN][WIENER_WIN],
int64_t H_int[WIENER_WIN2][WIENER_WIN * 8]) {
int j, k, l;
const int wiener_win = WIENER_WIN;
// Main loop handles two pixels at a time
// We can assume that h_start is even, since it will always be aligned to
// a tile edge + some number of restoration units, and both of those will
// be 64-pixel aligned.
// However, at the edge of the image, h_end may be odd, so we need to handle
// that case correctly.
assert(h_start % 2 == 0);
const int h_end_even = h_end & ~1;
const int has_odd_pixel = h_end & 1;
for (j = h_start; j < h_end_even; j += 2) {
const uint16_t X1 = src[j];
const uint16_t X2 = src[j + 1];
*sumX += X1 + X2;
const uint16_t *dgd_ij = dgd + j;
for (k = 0; k < wiener_win; k++) {
const uint16_t *dgd_ijk = dgd_ij + k * dgd_stride;
for (l = 0; l < wiener_win; l++) {
int64_t *H_ = &H_int[(l * wiener_win + k)][0];
const uint16_t D1 = dgd_ijk[l];
const uint16_t D2 = dgd_ijk[l + 1];
sumY[k][l] += D1 + D2;
M_int[k][l] += D1 * X1 + D2 * X2;
// Load two u16 values from dgd_ijkl combined as a u32,
// then broadcast to 8x u32 slots of a 256
const __m256i dgd_ijkl = _mm256_set1_epi32(loadu_int32(dgd_ijk + l));
// dgd_ijkl = [y x y x y x y x] [y x y x y x y x] where each is a u16
acc_stat_highbd_avx2(H_ + 0 * 8, dgd_ij + 0 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 1 * 8, dgd_ij + 1 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 2 * 8, dgd_ij + 2 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 3 * 8, dgd_ij + 3 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 4 * 8, dgd_ij + 4 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 5 * 8, dgd_ij + 5 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 6 * 8, dgd_ij + 6 * dgd_stride, shuffle,
&dgd_ijkl);
}
}
}
// If the width is odd, add in the final pixel
if (has_odd_pixel) {
const uint16_t X1 = src[j];
*sumX += X1;
const uint16_t *dgd_ij = dgd + j;
for (k = 0; k < wiener_win; k++) {
const uint16_t *dgd_ijk = dgd_ij + k * dgd_stride;
for (l = 0; l < wiener_win; l++) {
int64_t *H_ = &H_int[(l * wiener_win + k)][0];
const uint16_t D1 = dgd_ijk[l];
sumY[k][l] += D1;
M_int[k][l] += D1 * X1;
// The `acc_stat_highbd_avx2` function wants its input to have
// interleaved copies of two pixels, but we only have one. However, the
// pixels are (effectively) used as inputs to a multiply-accumulate. So
// if we set the extra pixel slot to 0, then it is effectively ignored.
const __m256i dgd_ijkl = _mm256_set1_epi32((int)D1);
acc_stat_highbd_avx2(H_ + 0 * 8, dgd_ij + 0 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 1 * 8, dgd_ij + 1 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 2 * 8, dgd_ij + 2 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 3 * 8, dgd_ij + 3 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 4 * 8, dgd_ij + 4 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 5 * 8, dgd_ij + 5 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 6 * 8, dgd_ij + 6 * dgd_stride, shuffle,
&dgd_ijkl);
}
}
}
}
static inline void compute_stats_highbd_win7_opt_avx2(
const uint8_t *dgd8, const uint8_t *src8, int h_start, int h_end,
int v_start, int v_end, int dgd_stride, int src_stride, int64_t *M,
int64_t *H, aom_bit_depth_t bit_depth) {
int i, j, k, l, m, n;
const int wiener_win = WIENER_WIN;
const int pixel_count = (h_end - h_start) * (v_end - v_start);
const int wiener_win2 = wiener_win * wiener_win;
const int wiener_halfwin = (wiener_win >> 1);
const uint16_t *src = CONVERT_TO_SHORTPTR(src8);
const uint16_t *dgd = CONVERT_TO_SHORTPTR(dgd8);
const uint16_t avg =
find_average_highbd(dgd, h_start, h_end, v_start, v_end, dgd_stride);
int64_t M_int[WIENER_WIN][WIENER_WIN] = { { 0 } };
DECLARE_ALIGNED(32, int64_t, H_int[WIENER_WIN2][WIENER_WIN * 8]) = { { 0 } };
int32_t sumY[WIENER_WIN][WIENER_WIN] = { { 0 } };
int32_t sumX = 0;
const uint16_t *dgd_win = dgd - wiener_halfwin * dgd_stride - wiener_halfwin;
const __m256i shuffle = yy_loadu_256(g_shuffle_stats_highbd_data);
for (j = v_start; j < v_end; j += 64) {
const int vert_end = AOMMIN(64, v_end - j) + j;
for (i = j; i < vert_end; i++) {
acc_stat_highbd_win7_one_line_avx2(
dgd_win + i * dgd_stride, src + i * src_stride, h_start, h_end,
dgd_stride, &shuffle, &sumX, sumY, M_int, H_int);
}
}
uint8_t bit_depth_divider = 1;
if (bit_depth == AOM_BITS_12)
bit_depth_divider = 16;
else if (bit_depth == AOM_BITS_10)
bit_depth_divider = 4;
const int64_t avg_square_sum = (int64_t)avg * (int64_t)avg * pixel_count;
for (k = 0; k < wiener_win; k++) {
for (l = 0; l < wiener_win; l++) {
const int32_t idx0 = l * wiener_win + k;
M[idx0] = (M_int[k][l] +
(avg_square_sum - (int64_t)avg * (sumX + sumY[k][l]))) /
bit_depth_divider;
int64_t *H_ = H + idx0 * wiener_win2;
int64_t *H_int_ = &H_int[idx0][0];
for (m = 0; m < wiener_win; m++) {
for (n = 0; n < wiener_win; n++) {
H_[m * wiener_win + n] =
(H_int_[n * 8 + m] +
(avg_square_sum - (int64_t)avg * (sumY[k][l] + sumY[n][m]))) /
bit_depth_divider;
}
}
}
}
}
static inline void acc_stat_highbd_win5_one_line_avx2(
const uint16_t *dgd, const uint16_t *src, int h_start, int h_end,
int dgd_stride, const __m256i *shuffle, int32_t *sumX,
int32_t sumY[WIENER_WIN_CHROMA][WIENER_WIN_CHROMA],
int64_t M_int[WIENER_WIN_CHROMA][WIENER_WIN_CHROMA],
int64_t H_int[WIENER_WIN2_CHROMA][WIENER_WIN_CHROMA * 8]) {
int j, k, l;
const int wiener_win = WIENER_WIN_CHROMA;
// Main loop handles two pixels at a time
// We can assume that h_start is even, since it will always be aligned to
// a tile edge + some number of restoration units, and both of those will
// be 64-pixel aligned.
// However, at the edge of the image, h_end may be odd, so we need to handle
// that case correctly.
assert(h_start % 2 == 0);
const int h_end_even = h_end & ~1;
const int has_odd_pixel = h_end & 1;
for (j = h_start; j < h_end_even; j += 2) {
const uint16_t X1 = src[j];
const uint16_t X2 = src[j + 1];
*sumX += X1 + X2;
const uint16_t *dgd_ij = dgd + j;
for (k = 0; k < wiener_win; k++) {
const uint16_t *dgd_ijk = dgd_ij + k * dgd_stride;
for (l = 0; l < wiener_win; l++) {
int64_t *H_ = &H_int[(l * wiener_win + k)][0];
const uint16_t D1 = dgd_ijk[l];
const uint16_t D2 = dgd_ijk[l + 1];
sumY[k][l] += D1 + D2;
M_int[k][l] += D1 * X1 + D2 * X2;
// Load two u16 values from dgd_ijkl combined as a u32,
// then broadcast to 8x u32 slots of a 256
const __m256i dgd_ijkl = _mm256_set1_epi32(loadu_int32(dgd_ijk + l));
// dgd_ijkl = [x y x y x y x y] [x y x y x y x y] where each is a u16
acc_stat_highbd_avx2(H_ + 0 * 8, dgd_ij + 0 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 1 * 8, dgd_ij + 1 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 2 * 8, dgd_ij + 2 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 3 * 8, dgd_ij + 3 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 4 * 8, dgd_ij + 4 * dgd_stride, shuffle,
&dgd_ijkl);
}
}
}
// If the width is odd, add in the final pixel
if (has_odd_pixel) {
const uint16_t X1 = src[j];
*sumX += X1;
const uint16_t *dgd_ij = dgd + j;
for (k = 0; k < wiener_win; k++) {
const uint16_t *dgd_ijk = dgd_ij + k * dgd_stride;
for (l = 0; l < wiener_win; l++) {
int64_t *H_ = &H_int[(l * wiener_win + k)][0];
const uint16_t D1 = dgd_ijk[l];
sumY[k][l] += D1;
M_int[k][l] += D1 * X1;
// The `acc_stat_highbd_avx2` function wants its input to have
// interleaved copies of two pixels, but we only have one. However, the
// pixels are (effectively) used as inputs to a multiply-accumulate. So
// if we set the extra pixel slot to 0, then it is effectively ignored.
const __m256i dgd_ijkl = _mm256_set1_epi32((int)D1);
acc_stat_highbd_avx2(H_ + 0 * 8, dgd_ij + 0 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 1 * 8, dgd_ij + 1 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 2 * 8, dgd_ij + 2 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 3 * 8, dgd_ij + 3 * dgd_stride, shuffle,
&dgd_ijkl);
acc_stat_highbd_avx2(H_ + 4 * 8, dgd_ij + 4 * dgd_stride, shuffle,
&dgd_ijkl);
}
}
}
}
static inline void compute_stats_highbd_win5_opt_avx2(
const uint8_t *dgd8, const uint8_t *src8, int h_start, int h_end,
int v_start, int v_end, int dgd_stride, int src_stride, int64_t *M,
int64_t *H, aom_bit_depth_t bit_depth) {
int i, j, k, l, m, n;
const int wiener_win = WIENER_WIN_CHROMA;
const int pixel_count = (h_end - h_start) * (v_end - v_start);
const int wiener_win2 = wiener_win * wiener_win;
const int wiener_halfwin = (wiener_win >> 1);
const uint16_t *src = CONVERT_TO_SHORTPTR(src8);
const uint16_t *dgd = CONVERT_TO_SHORTPTR(dgd8);
const uint16_t avg =
find_average_highbd(dgd, h_start, h_end, v_start, v_end, dgd_stride);
int64_t M_int64[WIENER_WIN_CHROMA][WIENER_WIN_CHROMA] = { { 0 } };
DECLARE_ALIGNED(
32, int64_t,
H_int64[WIENER_WIN2_CHROMA][WIENER_WIN_CHROMA * 8]) = { { 0 } };
int32_t sumY[WIENER_WIN_CHROMA][WIENER_WIN_CHROMA] = { { 0 } };
int32_t sumX = 0;
const uint16_t *dgd_win = dgd - wiener_halfwin * dgd_stride - wiener_halfwin;
const __m256i shuffle = yy_loadu_256(g_shuffle_stats_highbd_data);
for (j = v_start; j < v_end; j += 64) {
const int vert_end = AOMMIN(64, v_end - j) + j;
for (i = j; i < vert_end; i++) {
acc_stat_highbd_win5_one_line_avx2(
dgd_win + i * dgd_stride, src + i * src_stride, h_start, h_end,
dgd_stride, &shuffle, &sumX, sumY, M_int64, H_int64);
}
}
uint8_t bit_depth_divider = 1;
if (bit_depth == AOM_BITS_12)
bit_depth_divider = 16;
else if (bit_depth == AOM_BITS_10)
bit_depth_divider = 4;
const int64_t avg_square_sum = (int64_t)avg * (int64_t)avg * pixel_count;
for (k = 0; k < wiener_win; k++) {
for (l = 0; l < wiener_win; l++) {
const int32_t idx0 = l * wiener_win + k;
M[idx0] = (M_int64[k][l] +
(avg_square_sum - (int64_t)avg * (sumX + sumY[k][l]))) /
bit_depth_divider;
int64_t *H_ = H + idx0 * wiener_win2;
int64_t *H_int_ = &H_int64[idx0][0];
for (m = 0; m < wiener_win; m++) {
for (n = 0; n < wiener_win; n++) {
H_[m * wiener_win + n] =
(H_int_[n * 8 + m] +
(avg_square_sum - (int64_t)avg * (sumY[k][l] + sumY[n][m]))) /
bit_depth_divider;
}
}
}
}
}
void av1_compute_stats_highbd_avx2(int wiener_win, const uint8_t *dgd8,
const uint8_t *src8, int16_t *dgd_avg,
int16_t *src_avg, int h_start, int h_end,
int v_start, int v_end, int dgd_stride,
int src_stride, int64_t *M, int64_t *H,
aom_bit_depth_t bit_depth) {
if (wiener_win == WIENER_WIN) {
(void)dgd_avg;
(void)src_avg;
compute_stats_highbd_win7_opt_avx2(dgd8, src8, h_start, h_end, v_start,
v_end, dgd_stride, src_stride, M, H,
bit_depth);
} else if (wiener_win == WIENER_WIN_CHROMA) {
(void)dgd_avg;
(void)src_avg;
compute_stats_highbd_win5_opt_avx2(dgd8, src8, h_start, h_end, v_start,
v_end, dgd_stride, src_stride, M, H,
bit_depth);
} else {
av1_compute_stats_highbd_c(wiener_win, dgd8, src8, dgd_avg, src_avg,
h_start, h_end, v_start, v_end, dgd_stride,
src_stride, M, H, bit_depth);
}
}
#endif // CONFIG_AV1_HIGHBITDEPTH
static inline void madd_and_accum_avx2(__m256i src, __m256i dgd, __m256i *sum) {
*sum = _mm256_add_epi32(*sum, _mm256_madd_epi16(src, dgd));
}
static inline __m256i convert_and_add_avx2(__m256i src) {
const __m256i s0 = _mm256_cvtepi32_epi64(_mm256_castsi256_si128(src));
const __m256i s1 = _mm256_cvtepi32_epi64(_mm256_extracti128_si256(src, 1));
return _mm256_add_epi64(s0, s1);
}
static inline __m256i hadd_four_32_to_64_avx2(__m256i src0, __m256i src1,
__m256i *src2, __m256i *src3) {
// 00 01 10 11 02 03 12 13
const __m256i s_0 = _mm256_hadd_epi32(src0, src1);
// 20 21 30 31 22 23 32 33
const __m256i s_1 = _mm256_hadd_epi32(*src2, *src3);
// 00+01 10+11 20+21 30+31 02+03 12+13 22+23 32+33
const __m256i s_2 = _mm256_hadd_epi32(s_0, s_1);
return convert_and_add_avx2(s_2);
}
static inline __m128i add_64bit_lvl_avx2(__m256i src0, __m256i src1) {
// 00 10 02 12
const __m256i t0 = _mm256_unpacklo_epi64(src0, src1);
// 01 11 03 13
const __m256i t1 = _mm256_unpackhi_epi64(src0, src1);
// 00+01 10+11 02+03 12+13
const __m256i sum = _mm256_add_epi64(t0, t1);
// 00+01 10+11
const __m128i sum0 = _mm256_castsi256_si128(sum);
// 02+03 12+13
const __m128i sum1 = _mm256_extracti128_si256(sum, 1);
// 00+01+02+03 10+11+12+13
return _mm_add_epi64(sum0, sum1);
}
static inline __m128i convert_32_to_64_add_avx2(__m256i src0, __m256i src1) {
// 00 01 02 03
const __m256i s0 = convert_and_add_avx2(src0);
// 10 11 12 13
const __m256i s1 = convert_and_add_avx2(src1);
return add_64bit_lvl_avx2(s0, s1);
}
static inline int32_t calc_sum_of_register(__m256i src) {
const __m128i src_l = _mm256_castsi256_si128(src);
const __m128i src_h = _mm256_extracti128_si256(src, 1);
const __m128i sum = _mm_add_epi32(src_l, src_h);
const __m128i dst0 = _mm_add_epi32(sum, _mm_srli_si128(sum, 8));
const __m128i dst1 = _mm_add_epi32(dst0, _mm_srli_si128(dst0, 4));
return _mm_cvtsi128_si32(dst1);
}
static inline void transpose_64bit_4x4_avx2(const __m256i *const src,
__m256i *const dst) {
// Unpack 64 bit elements. Goes from:
// src[0]: 00 01 02 03
// src[1]: 10 11 12 13
// src[2]: 20 21 22 23
// src[3]: 30 31 32 33
// to:
// reg0: 00 10 02 12
// reg1: 20 30 22 32
// reg2: 01 11 03 13
// reg3: 21 31 23 33
const __m256i reg0 = _mm256_unpacklo_epi64(src[0], src[1]);
const __m256i reg1 = _mm256_unpacklo_epi64(src[2], src[3]);
const __m256i reg2 = _mm256_unpackhi_epi64(src[0], src[1]);
const __m256i reg3 = _mm256_unpackhi_epi64(src[2], src[3]);
// Unpack 64 bit elements resulting in:
// dst[0]: 00 10 20 30
// dst[1]: 01 11 21 31
// dst[2]: 02 12 22 32
// dst[3]: 03 13 23 33
dst[0] = _mm256_inserti128_si256(reg0, _mm256_castsi256_si128(reg1), 1);
dst[1] = _mm256_inserti128_si256(reg2, _mm256_castsi256_si128(reg3), 1);
dst[2] = _mm256_inserti128_si256(reg1, _mm256_extracti128_si256(reg0, 1), 0);
dst[3] = _mm256_inserti128_si256(reg3, _mm256_extracti128_si256(reg2, 1), 0);
}
// When we load 32 values of int8_t type and need less than 32 values for
// processing, the below mask is used to make the extra values zero.
static const int8_t mask_8bit[32] = {
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // 16 bytes
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // 16 bytes
};
// When we load 16 values of int16_t type and need less than 16 values for
// processing, the below mask is used to make the extra values zero.
static const int16_t mask_16bit[32] = {
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // 16 bytes
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, // 16 bytes
};
static inline uint8_t calc_dgd_buf_avg_avx2(const uint8_t *src, int32_t h_start,
int32_t h_end, int32_t v_start,
int32_t v_end, int32_t stride) {
const uint8_t *src_temp = src + v_start * stride + h_start;
const __m256i zero = _mm256_setzero_si256();
const int32_t width = h_end - h_start;
const int32_t height = v_end - v_start;
const int32_t wd_beyond_mul32 = width & 31;
const int32_t wd_mul32 = width - wd_beyond_mul32;
__m128i mask_low, mask_high;
__m256i ss = zero;
// When width is not multiple of 32, it still loads 32 and to make the data
// which is extra (beyond required) as zero using the below mask.
if (wd_beyond_mul32 >= 16) {
mask_low = _mm_set1_epi8(-1);
mask_high = _mm_loadu_si128((__m128i *)(&mask_8bit[32 - wd_beyond_mul32]));
} else {
mask_low = _mm_loadu_si128((__m128i *)(&mask_8bit[16 - wd_beyond_mul32]));
mask_high = _mm_setzero_si128();
}
const __m256i mask =
_mm256_inserti128_si256(_mm256_castsi128_si256(mask_low), mask_high, 1);
int32_t proc_ht = 0;
do {
// Process width in multiple of 32.
int32_t proc_wd = 0;
while (proc_wd < wd_mul32) {
const __m256i s_0 = _mm256_loadu_si256((__m256i *)(src_temp + proc_wd));
const __m256i sad_0 = _mm256_sad_epu8(s_0, zero);
ss = _mm256_add_epi32(ss, sad_0);
proc_wd += 32;
}
// Process the remaining width.
if (wd_beyond_mul32) {
const __m256i s_0 = _mm256_loadu_si256((__m256i *)(src_temp + proc_wd));
const __m256i s_m_0 = _mm256_and_si256(s_0, mask);
const __m256i sad_0 = _mm256_sad_epu8(s_m_0, zero);
ss = _mm256_add_epi32(ss, sad_0);
}
src_temp += stride;
proc_ht++;
} while (proc_ht < height);
const uint32_t sum = calc_sum_of_register(ss);
const uint8_t avg = sum / (width * height);
return avg;
}
// Fill (src-avg) or (dgd-avg) buffers. Note that when n = (width % 16) is not
// 0, it writes (16 - n) more data than required.
static inline void sub_avg_block_avx2(const uint8_t *src, int32_t src_stride,
uint8_t avg, int32_t width,
int32_t height, int16_t *dst,
int32_t dst_stride,
int use_downsampled_wiener_stats) {
const __m256i avg_reg = _mm256_set1_epi16(avg);
int32_t proc_ht = 0;
do {
int ds_factor =
use_downsampled_wiener_stats ? WIENER_STATS_DOWNSAMPLE_FACTOR : 1;
if (use_downsampled_wiener_stats &&
(height - proc_ht < WIENER_STATS_DOWNSAMPLE_FACTOR)) {
ds_factor = height - proc_ht;
}
int32_t proc_wd = 0;
while (proc_wd < width) {
const __m128i s = _mm_loadu_si128((__m128i *)(src + proc_wd));
const __m256i ss = _mm256_cvtepu8_epi16(s);
const __m256i d = _mm256_sub_epi16(ss, avg_reg);
_mm256_storeu_si256((__m256i *)(dst + proc_wd), d);
proc_wd += 16;
}
src += ds_factor * src_stride;
dst += ds_factor * dst_stride;
proc_ht += ds_factor;
} while (proc_ht < height);
}
// Fills lower-triangular elements of H buffer from upper triangular elements of
// the same
static inline void fill_lower_triag_elements_avx2(const int32_t wiener_win2,
int64_t *const H) {
for (int32_t i = 0; i < wiener_win2 - 1; i += 4) {
__m256i in[4], out[4];
in[0] = _mm256_loadu_si256((__m256i *)(H + (i + 0) * wiener_win2 + i + 1));
in[1] = _mm256_loadu_si256((__m256i *)(H + (i + 1) * wiener_win2 + i + 1));
in[2] = _mm256_loadu_si256((__m256i *)(H + (i + 2) * wiener_win2 + i + 1));
in[3] = _mm256_loadu_si256((__m256i *)(H + (i + 3) * wiener_win2 + i + 1));
transpose_64bit_4x4_avx2(in, out);
_mm_storel_epi64((__m128i *)(H + (i + 1) * wiener_win2 + i),
_mm256_castsi256_si128(out[0]));
_mm_storeu_si128((__m128i *)(H + (i + 2) * wiener_win2 + i),
_mm256_castsi256_si128(out[1]));
_mm256_storeu_si256((__m256i *)(H + (i + 3) * wiener_win2 + i), out[2]);
_mm256_storeu_si256((__m256i *)(H + (i + 4) * wiener_win2 + i), out[3]);
for (int32_t j = i + 5; j < wiener_win2; j += 4) {
in[0] = _mm256_loadu_si256((__m256i *)(H + (i + 0) * wiener_win2 + j));
in[1] = _mm256_loadu_si256((__m256i *)(H + (i + 1) * wiener_win2 + j));
in[2] = _mm256_loadu_si256((__m256i *)(H + (i + 2) * wiener_win2 + j));
in[3] = _mm256_loadu_si256((__m256i *)(H + (i + 3) * wiener_win2 + j));
transpose_64bit_4x4_avx2(in, out);
_mm256_storeu_si256((__m256i *)(H + (j + 0) * wiener_win2 + i), out[0]);
_mm256_storeu_si256((__m256i *)(H + (j + 1) * wiener_win2 + i), out[1]);
_mm256_storeu_si256((__m256i *)(H + (j + 2) * wiener_win2 + i), out[2]);
_mm256_storeu_si256((__m256i *)(H + (j + 3) * wiener_win2 + i), out[3]);
}
}
}
// Fill H buffer based on loop_count.
#define INIT_H_VALUES(d, loop_count) \
for (int g = 0; g < (loop_count); g++) { \
const __m256i dgd0 = \
_mm256_loadu_si256((__m256i *)((d) + (g * d_stride))); \
madd_and_accum_avx2(dgd_mul_df, dgd0, &sum_h[g]); \
}
// Fill M & H buffer.
#define INIT_MH_VALUES(d) \
for (int g = 0; g < wiener_win; g++) { \
const __m256i dgds_0 = \
_mm256_loadu_si256((__m256i *)((d) + (g * d_stride))); \
madd_and_accum_avx2(src_mul_df, dgds_0, &sum_m[g]); \
madd_and_accum_avx2(dgd_mul_df, dgds_0, &sum_h[g]); \
}
// Update the dgd pointers appropriately.
#define INITIALIZATION(wiener_window_sz) \
j = i / (wiener_window_sz); \
const int16_t *d_window = d + j; \
const int16_t *d_current_row = \
d + j + ((i % (wiener_window_sz)) * d_stride); \
int proc_ht = v_start; \
downsample_factor = \
use_downsampled_wiener_stats ? WIENER_STATS_DOWNSAMPLE_FACTOR : 1; \
__m256i sum_h[wiener_window_sz]; \
memset(sum_h, 0, sizeof(sum_h));
// Update the downsample factor appropriately.
#define UPDATE_DOWNSAMPLE_FACTOR \
int proc_wd = 0; \
if (use_downsampled_wiener_stats && \
((v_end - proc_ht) < WIENER_STATS_DOWNSAMPLE_FACTOR)) { \
downsample_factor = v_end - proc_ht; \
} \
const __m256i df_reg = _mm256_set1_epi16(downsample_factor);
#define CALCULATE_REMAINING_H_WIN5 \
while (j < wiener_win) { \
d_window = d; \
d_current_row = d + (i / wiener_win) + ((i % wiener_win) * d_stride); \
const __m256i zero = _mm256_setzero_si256(); \
sum_h[0] = zero; \
sum_h[1] = zero; \
sum_h[2] = zero; \
sum_h[3] = zero; \
sum_h[4] = zero; \
\
proc_ht = v_start; \
downsample_factor = \
use_downsampled_wiener_stats ? WIENER_STATS_DOWNSAMPLE_FACTOR : 1; \
do { \
UPDATE_DOWNSAMPLE_FACTOR; \
\
/* Process the amount of width multiple of 16.*/ \
while (proc_wd < wd_mul16) { \
const __m256i dgd = \
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd)); \
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg); \
INIT_H_VALUES(d_window + j + proc_wd, 5) \
\
proc_wd += 16; \
}; \
\
/* Process the remaining width here. */ \
if (wd_beyond_mul16) { \
const __m256i dgd = \
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd)); \
const __m256i dgd_mask = _mm256_and_si256(dgd, mask); \
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg); \
INIT_H_VALUES(d_window + j + proc_wd, 5) \
} \
proc_ht += downsample_factor; \
d_window += downsample_factor * d_stride; \
d_current_row += downsample_factor * d_stride; \
} while (proc_ht < v_end); \
const __m256i s_h0 = \
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]); \
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + (wiener_win * j)), \
s_h0); \
const __m256i s_m_h = convert_and_add_avx2(sum_h[4]); \
const __m128i s_m_h0 = add_64bit_lvl_avx2(s_m_h, s_m_h); \
_mm_storel_epi64( \
(__m128i *)(H + (i * wiener_win2) + (wiener_win * j) + 4), s_m_h0); \
j++; \
}
#define CALCULATE_REMAINING_H_WIN7 \
while (j < wiener_win) { \
d_window = d; \
d_current_row = d + (i / wiener_win) + ((i % wiener_win) * d_stride); \
const __m256i zero = _mm256_setzero_si256(); \
sum_h[0] = zero; \
sum_h[1] = zero; \
sum_h[2] = zero; \
sum_h[3] = zero; \
sum_h[4] = zero; \
sum_h[5] = zero; \
sum_h[6] = zero; \
\
proc_ht = v_start; \
downsample_factor = \
use_downsampled_wiener_stats ? WIENER_STATS_DOWNSAMPLE_FACTOR : 1; \
do { \
UPDATE_DOWNSAMPLE_FACTOR; \
\
/* Process the amount of width multiple of 16.*/ \
while (proc_wd < wd_mul16) { \
const __m256i dgd = \
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd)); \
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg); \
INIT_H_VALUES(d_window + j + proc_wd, 7) \
\
proc_wd += 16; \
}; \
\
/* Process the remaining width here. */ \
if (wd_beyond_mul16) { \
const __m256i dgd = \
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd)); \
const __m256i dgd_mask = _mm256_and_si256(dgd, mask); \
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg); \
INIT_H_VALUES(d_window + j + proc_wd, 7) \
} \
proc_ht += downsample_factor; \
d_window += downsample_factor * d_stride; \
d_current_row += downsample_factor * d_stride; \
} while (proc_ht < v_end); \
const __m256i s_h1 = \
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]); \
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + (wiener_win * j)), \
s_h1); \
const __m256i s_h2 = \
hadd_four_32_to_64_avx2(sum_h[4], sum_h[5], &sum_h[6], &sum_h[6]); \
_mm256_storeu_si256( \
(__m256i *)(H + (i * wiener_win2) + (wiener_win * j) + 4), s_h2); \
j++; \
}
// The buffers H(auto-covariance) and M(cross-correlation) are used to estimate
// the filter tap values required for wiener filtering. Here, the buffer H is of
// size ((wiener_window_size^2)*(wiener_window_size^2)) and M is of size
// (wiener_window_size*wiener_window_size). H is a symmetric matrix where the
// value above the diagonal (upper triangle) are equal to the values below the
// diagonal (lower triangle). The calculation of elements/stats of H(upper
// triangle) and M is done in steps as described below where each step fills
// specific values of H and M.
// Once the upper triangular elements of H matrix are derived, the same will be
// copied to lower triangular using the function
// fill_lower_triag_elements_avx2().
// Example: Wiener window size =
// WIENER_WIN_CHROMA (5) M buffer = [M0 M1 M2 ---- M23 M24] H buffer = Hxy
// (x-row, y-column) [H00 H01 H02 ---- H023 H024] [H10 H11 H12 ---- H123 H124]
// [H30 H31 H32 ---- H323 H324]
// [H40 H41 H42 ---- H423 H424]
// [H50 H51 H52 ---- H523 H524]
// [H60 H61 H62 ---- H623 H624]
// ||
// ||
// [H230 H231 H232 ---- H2323 H2324]
// [H240 H241 H242 ---- H2423 H2424]
// In Step 1, whole M buffers (i.e., M0 to M24) and the first row of H (i.e.,
// H00 to H024) is filled. The remaining rows of H buffer are filled through
// steps 2 to 6.
static void compute_stats_win5_avx2(const int16_t *const d, int32_t d_stride,
const int16_t *const s, int32_t s_stride,
int32_t width, int v_start, int v_end,
int64_t *const M, int64_t *const H,
int use_downsampled_wiener_stats) {
const int32_t wiener_win = WIENER_WIN_CHROMA;
const int32_t wiener_win2 = wiener_win * wiener_win;
// Amount of width which is beyond multiple of 16. This case is handled
// appropriately to process only the required width towards the end.
const int32_t wd_mul16 = width & ~15;
const int32_t wd_beyond_mul16 = width - wd_mul16;
const __m256i mask =
_mm256_loadu_si256((__m256i *)(&mask_16bit[16 - wd_beyond_mul16]));
int downsample_factor;
// Step 1: Full M (i.e., M0 to M24) and first row H (i.e., H00 to H024)
// values are filled here. Here, the loop over 'j' is executed for values 0
// to 4 (wiener_win-1). When the loop executed for a specific 'j', 5 values of
// M and H are filled as shown below.
// j=0: M0-M4 and H00-H04, j=1: M5-M9 and H05-H09 are filled etc,.
int j = 0;
do {
const int16_t *s_t = s;
const int16_t *d_t = d;
__m256i sum_m[WIENER_WIN_CHROMA] = { _mm256_setzero_si256() };
__m256i sum_h[WIENER_WIN_CHROMA] = { _mm256_setzero_si256() };
downsample_factor =
use_downsampled_wiener_stats ? WIENER_STATS_DOWNSAMPLE_FACTOR : 1;
int proc_ht = v_start;
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i src = _mm256_loadu_si256((__m256i *)(s_t + proc_wd));
const __m256i dgd = _mm256_loadu_si256((__m256i *)(d_t + proc_wd));
const __m256i src_mul_df = _mm256_mullo_epi16(src, df_reg);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_MH_VALUES(d_t + j + proc_wd)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i src = _mm256_loadu_si256((__m256i *)(s_t + proc_wd));
const __m256i dgd = _mm256_loadu_si256((__m256i *)(d_t + proc_wd));
const __m256i src_mask = _mm256_and_si256(src, mask);
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i src_mul_df = _mm256_mullo_epi16(src_mask, df_reg);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_MH_VALUES(d_t + j + proc_wd)
}
proc_ht += downsample_factor;
s_t += downsample_factor * s_stride;
d_t += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_m =
hadd_four_32_to_64_avx2(sum_m[0], sum_m[1], &sum_m[2], &sum_m[3]);
const __m128i s_m_h = convert_32_to_64_add_avx2(sum_m[4], sum_h[4]);
_mm256_storeu_si256((__m256i *)(M + wiener_win * j), s_m);
_mm_storel_epi64((__m128i *)&M[wiener_win * j + 4], s_m_h);
const __m256i s_h =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
_mm256_storeu_si256((__m256i *)(H + wiener_win * j), s_h);
_mm_storeh_epi64((__m128i *)&H[wiener_win * j + 4], s_m_h);
} while (++j < wiener_win);
// The below steps are designed to fill remaining rows of H buffer. Here, aim
// is to fill only upper triangle elements correspond to each row and lower
// triangle elements are copied from upper-triangle elements. Also, as
// mentioned in Step 1, the core function is designed to fill 5
// elements/stats/values of H buffer.
//
// Step 2: Here, the rows 1, 6, 11, 16 and 21 are filled. As we need to fill
// only upper-triangle elements, H10 from row1, H60-H64 and H65 from row6,etc,
// are need not be filled. As the core function process 5 values, in first
// iteration of 'j' only 4 values to be filled i.e., H11-H14 from row1,H66-H69
// from row6, etc.
for (int i = 1; i < wiener_win2; i += wiener_win) {
// Update the dgd pointers appropriately and also derive the 'j'th iteration
// from where the H buffer filling needs to be started.
INITIALIZATION(WIENER_WIN_CHROMA)
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + proc_wd + (1 * d_stride), 4)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + proc_wd + (1 * d_stride), 4)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_h =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + i), s_h);
// process the remaining 'j' iterations.
j++;
CALCULATE_REMAINING_H_WIN5
}
// Step 3: Here, the rows 2, 7, 12, 17 and 22 are filled. As we need to fill
// only upper-triangle elements, H20-H21 from row2, H70-H74 and H75-H76 from
// row7, etc, are need not be filled. As the core function process 5 values,
// in first iteration of 'j' only 3 values to be filled i.e., H22-H24 from
// row2, H77-H79 from row7, etc.
for (int i = 2; i < wiener_win2; i += wiener_win) {
// Update the dgd pointers appropriately and also derive the 'j'th iteration
// from where the H buffer filling needs to be started.
INITIALIZATION(WIENER_WIN_CHROMA)
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + proc_wd + (2 * d_stride), 3)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + proc_wd + (2 * d_stride), 3)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_h =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + i), s_h);
// process the remaining 'j' iterations.
j++;
CALCULATE_REMAINING_H_WIN5
}
// Step 4: Here, the rows 3, 8, 13, 18 and 23 are filled. As we need to fill
// only upper-triangle elements, H30-H32 from row3, H80-H84 and H85-H87 from
// row8, etc, are need not be filled. As the core function process 5 values,
// in first iteration of 'j' only 2 values to be filled i.e., H33-H34 from
// row3, H88-89 from row8, etc.
for (int i = 3; i < wiener_win2; i += wiener_win) {
// Update the dgd pointers appropriately and also derive the 'j'th iteration
// from where the H buffer filling needs to be started.
INITIALIZATION(WIENER_WIN_CHROMA)
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + proc_wd + (3 * d_stride), 2)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + proc_wd + (3 * d_stride), 2)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m128i s_h = convert_32_to_64_add_avx2(sum_h[0], sum_h[1]);
_mm_storeu_si128((__m128i *)(H + (i * wiener_win2) + i), s_h);
// process the remaining 'j' iterations.
j++;
CALCULATE_REMAINING_H_WIN5
}
// Step 5: Here, the rows 4, 9, 14, 19 and 24 are filled. As we need to fill
// only upper-triangle elements, H40-H43 from row4, H90-H94 and H95-H98 from
// row9, etc, are need not be filled. As the core function process 5 values,
// in first iteration of 'j' only 1 values to be filled i.e., H44 from row4,
// H99 from row9, etc.
for (int i = 4; i < wiener_win2; i += wiener_win) {
// Update the dgd pointers appropriately and also derive the 'j'th iteration
// from where the H buffer filling needs to be started.
INITIALIZATION(WIENER_WIN_CHROMA)
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + proc_wd + (4 * d_stride), 1)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + proc_wd + (4 * d_stride), 1)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m128i s_h = convert_32_to_64_add_avx2(sum_h[0], sum_h[1]);
_mm_storeu_si128((__m128i *)(H + (i * wiener_win2) + i), s_h);
// process the remaining 'j' iterations.
j++;
CALCULATE_REMAINING_H_WIN5
}
// Step 6: Here, the rows 5, 10, 15 and 20 are filled. As we need to fill only
// upper-triangle elements, H50-H54 from row5, H100-H104 and H105-H109 from
// row10,etc, are need not be filled. The first iteration of 'j' fills H55-H59
// from row5 and H1010-H1014 from row10, etc.
for (int i = 5; i < wiener_win2; i += wiener_win) {
// Derive j'th iteration from where the H buffer filling needs to be
// started.
j = i / wiener_win;
int shift = 0;
do {
// Update the dgd pointers appropriately.
int proc_ht = v_start;
const int16_t *d_window = d + (i / wiener_win);
const int16_t *d_current_row =
d + (i / wiener_win) + ((i % wiener_win) * d_stride);
downsample_factor =
use_downsampled_wiener_stats ? WIENER_STATS_DOWNSAMPLE_FACTOR : 1;
__m256i sum_h[WIENER_WIN_CHROMA] = { _mm256_setzero_si256() };
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + shift + proc_wd, 5)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + shift + proc_wd, 5)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_h =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + (wiener_win * j)),
s_h);
const __m256i s_m_h = convert_and_add_avx2(sum_h[4]);
const __m128i s_m_h0 = add_64bit_lvl_avx2(s_m_h, s_m_h);
_mm_storel_epi64(
(__m128i *)(H + (i * wiener_win2) + (wiener_win * j) + 4), s_m_h0);
shift++;
} while (++j < wiener_win);
}
fill_lower_triag_elements_avx2(wiener_win2, H);
}
// The buffers H(auto-covariance) and M(cross-correlation) are used to estimate
// the filter tap values required for wiener filtering. Here, the buffer H is of
// size ((wiener_window_size^2)*(wiener_window_size^2)) and M is of size
// (wiener_window_size*wiener_window_size). H is a symmetric matrix where the
// value above the diagonal (upper triangle) are equal to the values below the
// diagonal (lower triangle). The calculation of elements/stats of H(upper
// triangle) and M is done in steps as described below where each step fills
// specific values of H and M.
// Example:
// Wiener window size = WIENER_WIN (7)
// M buffer = [M0 M1 M2 ---- M47 M48]
// H buffer = Hxy (x-row, y-column)
// [H00 H01 H02 ---- H047 H048]
// [H10 H11 H12 ---- H147 H148]
// [H30 H31 H32 ---- H347 H348]
// [H40 H41 H42 ---- H447 H448]
// [H50 H51 H52 ---- H547 H548]
// [H60 H61 H62 ---- H647 H648]
// ||
// ||
// [H470 H471 H472 ---- H4747 H4748]
// [H480 H481 H482 ---- H4847 H4848]
// In Step 1, whole M buffers (i.e., M0 to M48) and the first row of H (i.e.,
// H00 to H048) is filled. The remaining rows of H buffer are filled through
// steps 2 to 8.
static void compute_stats_win7_avx2(const int16_t *const d, int32_t d_stride,
const int16_t *const s, int32_t s_stride,
int32_t width, int v_start, int v_end,
int64_t *const M, int64_t *const H,
int use_downsampled_wiener_stats) {
const int32_t wiener_win = WIENER_WIN;
const int32_t wiener_win2 = wiener_win * wiener_win;
// Amount of width which is beyond multiple of 16. This case is handled
// appropriately to process only the required width towards the end.
const int32_t wd_mul16 = width & ~15;
const int32_t wd_beyond_mul16 = width - wd_mul16;
const __m256i mask =
_mm256_loadu_si256((__m256i *)(&mask_16bit[16 - wd_beyond_mul16]));
int downsample_factor;
// Step 1: Full M (i.e., M0 to M48) and first row H (i.e., H00 to H048)
// values are filled here. Here, the loop over 'j' is executed for values 0
// to 6. When the loop executed for a specific 'j', 7 values of M and H are
// filled as shown below.
// j=0: M0-M6 and H00-H06, j=1: M7-M13 and H07-H013 are filled etc,.
int j = 0;
do {
const int16_t *s_t = s;
const int16_t *d_t = d;
__m256i sum_m[WIENER_WIN] = { _mm256_setzero_si256() };
__m256i sum_h[WIENER_WIN] = { _mm256_setzero_si256() };
downsample_factor =
use_downsampled_wiener_stats ? WIENER_STATS_DOWNSAMPLE_FACTOR : 1;
int proc_ht = v_start;
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i src = _mm256_loadu_si256((__m256i *)(s_t + proc_wd));
const __m256i dgd = _mm256_loadu_si256((__m256i *)(d_t + proc_wd));
const __m256i src_mul_df = _mm256_mullo_epi16(src, df_reg);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_MH_VALUES(d_t + j + proc_wd)
proc_wd += 16;
}
if (wd_beyond_mul16) {
const __m256i src = _mm256_loadu_si256((__m256i *)(s_t + proc_wd));
const __m256i dgd = _mm256_loadu_si256((__m256i *)(d_t + proc_wd));
const __m256i src_mask = _mm256_and_si256(src, mask);
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i src_mul_df = _mm256_mullo_epi16(src_mask, df_reg);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_MH_VALUES(d_t + j + proc_wd)
}
proc_ht += downsample_factor;
s_t += downsample_factor * s_stride;
d_t += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_m0 =
hadd_four_32_to_64_avx2(sum_m[0], sum_m[1], &sum_m[2], &sum_m[3]);
const __m256i s_m1 =
hadd_four_32_to_64_avx2(sum_m[4], sum_m[5], &sum_m[6], &sum_m[6]);
_mm256_storeu_si256((__m256i *)(M + wiener_win * j + 0), s_m0);
_mm_storeu_si128((__m128i *)(M + wiener_win * j + 4),
_mm256_castsi256_si128(s_m1));
_mm_storel_epi64((__m128i *)&M[wiener_win * j + 6],
_mm256_extracti128_si256(s_m1, 1));
const __m256i sh_0 =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
const __m256i sh_1 =
hadd_four_32_to_64_avx2(sum_h[4], sum_h[5], &sum_h[6], &sum_h[6]);
_mm256_storeu_si256((__m256i *)(H + wiener_win * j + 0), sh_0);
_mm_storeu_si128((__m128i *)(H + wiener_win * j + 4),
_mm256_castsi256_si128(sh_1));
_mm_storel_epi64((__m128i *)&H[wiener_win * j + 6],
_mm256_extracti128_si256(sh_1, 1));
} while (++j < wiener_win);
// The below steps are designed to fill remaining rows of H buffer. Here, aim
// is to fill only upper triangle elements correspond to each row and lower
// triangle elements are copied from upper-triangle elements. Also, as
// mentioned in Step 1, the core function is designed to fill 7
// elements/stats/values of H buffer.
//
// Step 2: Here, the rows 1, 8, 15, 22, 29, 36 and 43 are filled. As we need
// to fill only upper-triangle elements, H10 from row1, H80-H86 and H87 from
// row8, etc. are need not be filled. As the core function process 7 values,
// in first iteration of 'j' only 6 values to be filled i.e., H11-H16 from
// row1 and H88-H813 from row8, etc.
for (int i = 1; i < wiener_win2; i += wiener_win) {
// Update the dgd pointers appropriately and also derive the 'j'th iteration
// from where the H buffer filling needs to be started.
INITIALIZATION(WIENER_WIN)
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + proc_wd + (1 * d_stride), 6)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + proc_wd + (1 * d_stride), 6)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_h =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + i), s_h);
const __m128i s_h0 = convert_32_to_64_add_avx2(sum_h[4], sum_h[5]);
_mm_storeu_si128((__m128i *)(H + (i * wiener_win2) + i + 4), s_h0);
// process the remaining 'j' iterations.
j++;
CALCULATE_REMAINING_H_WIN7
}
// Step 3: Here, the rows 2, 9, 16, 23, 30, 37 and 44 are filled. As we need
// to fill only upper-triangle elements, H20-H21 from row2, H90-H96 and
// H97-H98 from row9, etc. are need not be filled. As the core function
// process 7 values, in first iteration of 'j' only 5 values to be filled
// i.e., H22-H26 from row2 and H99-H913 from row9, etc.
for (int i = 2; i < wiener_win2; i += wiener_win) {
// Update the dgd pointers appropriately and also derive the 'j'th iteration
// from where the H buffer filling needs to be started.
INITIALIZATION(WIENER_WIN)
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + proc_wd + (2 * d_stride), 5)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + proc_wd + (2 * d_stride), 5)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_h =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + i), s_h);
const __m256i s_m_h = convert_and_add_avx2(sum_h[4]);
const __m128i s_m_h0 = add_64bit_lvl_avx2(s_m_h, s_m_h);
_mm_storel_epi64((__m128i *)(H + (i * wiener_win2) + i + 4), s_m_h0);
// process the remaining 'j' iterations.
j++;
CALCULATE_REMAINING_H_WIN7
}
// Step 4: Here, the rows 3, 10, 17, 24, 31, 38 and 45 are filled. As we need
// to fill only upper-triangle elements, H30-H32 from row3, H100-H106 and
// H107-H109 from row10, etc. are need not be filled. As the core function
// process 7 values, in first iteration of 'j' only 4 values to be filled
// i.e., H33-H36 from row3 and H1010-H1013 from row10, etc.
for (int i = 3; i < wiener_win2; i += wiener_win) {
// Update the dgd pointers appropriately and also derive the 'j'th iteration
// from where the H buffer filling needs to be started.
INITIALIZATION(WIENER_WIN)
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + proc_wd + (3 * d_stride), 4)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + proc_wd + (3 * d_stride), 4)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_h =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + i), s_h);
// process the remaining 'j' iterations.
j++;
CALCULATE_REMAINING_H_WIN7
}
// Step 5: Here, the rows 4, 11, 18, 25, 32, 39 and 46 are filled. As we need
// to fill only upper-triangle elements, H40-H43 from row4, H110-H116 and
// H117-H1110 from row10, etc. are need not be filled. As the core function
// process 7 values, in first iteration of 'j' only 3 values to be filled
// i.e., H44-H46 from row4 and H1111-H1113 from row11, etc.
for (int i = 4; i < wiener_win2; i += wiener_win) {
// Update the dgd pointers appropriately and also derive the 'j'th iteration
// from where the H buffer filling needs to be started.
INITIALIZATION(WIENER_WIN)
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + proc_wd + (4 * d_stride), 3)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + proc_wd + (4 * d_stride), 3)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_h =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + i), s_h);
// process the remaining 'j' iterations.
j++;
CALCULATE_REMAINING_H_WIN7
}
// Step 6: Here, the rows 5, 12, 19, 26, 33, 40 and 47 are filled. As we need
// to fill only upper-triangle elements, H50-H54 from row5, H120-H126 and
// H127-H1211 from row12, etc. are need not be filled. As the core function
// process 7 values, in first iteration of 'j' only 2 values to be filled
// i.e., H55-H56 from row5 and H1212-H1213 from row12, etc.
for (int i = 5; i < wiener_win2; i += wiener_win) {
// Update the dgd pointers appropriately and also derive the 'j'th iteration
// from where the H buffer filling needs to be started.
INITIALIZATION(WIENER_WIN)
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + proc_wd + (5 * d_stride), 2)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + proc_wd + (5 * d_stride), 2)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_h =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + i), s_h);
// process the remaining 'j' iterations.
j++;
CALCULATE_REMAINING_H_WIN7
}
// Step 7: Here, the rows 6, 13, 20, 27, 34, 41 and 48 are filled. As we need
// to fill only upper-triangle elements, H60-H65 from row6, H130-H136 and
// H137-H1312 from row13, etc. are need not be filled. As the core function
// process 7 values, in first iteration of 'j' only 1 value to be filled
// i.e., H66 from row6 and H1313 from row13, etc.
for (int i = 6; i < wiener_win2; i += wiener_win) {
// Update the dgd pointers appropriately and also derive the 'j'th iteration
// from where the H buffer filling needs to be started.
INITIALIZATION(WIENER_WIN)
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + proc_wd + (6 * d_stride), 1)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + proc_wd + (6 * d_stride), 1)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i s_h =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
xx_storel_64(&H[(i * wiener_win2) + i], _mm256_castsi256_si128(s_h));
// process the remaining 'j' iterations.
j++;
CALCULATE_REMAINING_H_WIN7
}
// Step 8: Here, the rows 7, 14, 21, 28, 35 and 42 are filled. As we need
// to fill only upper-triangle elements, H70-H75 from row7, H140-H146 and
// H147-H1413 from row14, etc. are need not be filled. The first iteration of
// 'j' fills H77-H713 from row7 and H1414-H1420 from row14, etc.
for (int i = 7; i < wiener_win2; i += wiener_win) {
// Derive j'th iteration from where the H buffer filling needs to be
// started.
j = i / wiener_win;
int shift = 0;
do {
// Update the dgd pointers appropriately.
int proc_ht = v_start;
const int16_t *d_window = d + (i / WIENER_WIN);
const int16_t *d_current_row =
d + (i / WIENER_WIN) + ((i % WIENER_WIN) * d_stride);
downsample_factor =
use_downsampled_wiener_stats ? WIENER_STATS_DOWNSAMPLE_FACTOR : 1;
__m256i sum_h[WIENER_WIN] = { _mm256_setzero_si256() };
do {
UPDATE_DOWNSAMPLE_FACTOR
// Process the amount of width multiple of 16.
while (proc_wd < wd_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd, df_reg);
INIT_H_VALUES(d_window + shift + proc_wd, 7)
proc_wd += 16;
}
// Process the remaining width here.
if (wd_beyond_mul16) {
const __m256i dgd =
_mm256_loadu_si256((__m256i *)(d_current_row + proc_wd));
const __m256i dgd_mask = _mm256_and_si256(dgd, mask);
const __m256i dgd_mul_df = _mm256_mullo_epi16(dgd_mask, df_reg);
INIT_H_VALUES(d_window + shift + proc_wd, 7)
}
proc_ht += downsample_factor;
d_window += downsample_factor * d_stride;
d_current_row += downsample_factor * d_stride;
} while (proc_ht < v_end);
const __m256i sh_0 =
hadd_four_32_to_64_avx2(sum_h[0], sum_h[1], &sum_h[2], &sum_h[3]);
const __m256i sh_1 =
hadd_four_32_to_64_avx2(sum_h[4], sum_h[5], &sum_h[6], &sum_h[6]);
_mm256_storeu_si256((__m256i *)(H + (i * wiener_win2) + (wiener_win * j)),
sh_0);
_mm_storeu_si128(
(__m128i *)(H + (i * wiener_win2) + (wiener_win * j) + 4),
_mm256_castsi256_si128(sh_1));
_mm_storel_epi64((__m128i *)&H[(i * wiener_win2) + (wiener_win * j) + 6],
_mm256_extracti128_si256(sh_1, 1));
shift++;
} while (++j < wiener_win);
}
fill_lower_triag_elements_avx2(wiener_win2, H);
}
void av1_compute_stats_avx2(int wiener_win, const uint8_t *dgd,
const uint8_t *src, int16_t *dgd_avg,
int16_t *src_avg, int h_start, int h_end,
int v_start, int v_end, int dgd_stride,
int src_stride, int64_t *M, int64_t *H,
int use_downsampled_wiener_stats) {
if (wiener_win != WIENER_WIN && wiener_win != WIENER_WIN_CHROMA) {
// Currently, libaom supports Wiener filter processing with window sizes as
// WIENER_WIN_CHROMA(5) and WIENER_WIN(7). For any other window size, SIMD
// support is not facilitated. Hence, invoke C function for the same.
av1_compute_stats_c(wiener_win, dgd, src, dgd_avg, src_avg, h_start, h_end,
v_start, v_end, dgd_stride, src_stride, M, H,
use_downsampled_wiener_stats);
return;
}
const int32_t wiener_halfwin = wiener_win >> 1;
const uint8_t avg =
calc_dgd_buf_avg_avx2(dgd, h_start, h_end, v_start, v_end, dgd_stride);
const int32_t width = h_end - h_start;
const int32_t height = v_end - v_start;
const int32_t d_stride = (width + 2 * wiener_halfwin + 15) & ~15;
const int32_t s_stride = (width + 15) & ~15;
// Based on the sf 'use_downsampled_wiener_stats', process either once for
// UPDATE_DOWNSAMPLE_FACTOR or for each row.
sub_avg_block_avx2(src + v_start * src_stride + h_start, src_stride, avg,
width, height, src_avg, s_stride,
use_downsampled_wiener_stats);
// Compute (dgd-avg) buffer here which is used to fill H buffer.
sub_avg_block_avx2(
dgd + (v_start - wiener_halfwin) * dgd_stride + h_start - wiener_halfwin,
dgd_stride, avg, width + 2 * wiener_halfwin, height + 2 * wiener_halfwin,
dgd_avg, d_stride, 0);
if (wiener_win == WIENER_WIN) {
compute_stats_win7_avx2(dgd_avg, d_stride, src_avg, s_stride, width,
v_start, v_end, M, H, use_downsampled_wiener_stats);
} else if (wiener_win == WIENER_WIN_CHROMA) {
compute_stats_win5_avx2(dgd_avg, d_stride, src_avg, s_stride, width,
v_start, v_end, M, H, use_downsampled_wiener_stats);
}
}
static inline __m256i pair_set_epi16(int a, int b) {
return _mm256_set1_epi32(
(int32_t)(((uint16_t)(a)) | (((uint32_t)(uint16_t)(b)) << 16)));
}
int64_t av1_lowbd_pixel_proj_error_avx2(
const uint8_t *src8, int width, int height, int src_stride,
const uint8_t *dat8, int dat_stride, int32_t *flt0, int flt0_stride,
int32_t *flt1, int flt1_stride, int xq[2], const sgr_params_type *params) {
int i, j, k;
const int32_t shift = SGRPROJ_RST_BITS + SGRPROJ_PRJ_BITS;
const __m256i rounding = _mm256_set1_epi32(1 << (shift - 1));
__m256i sum64 = _mm256_setzero_si256();
const uint8_t *src = src8;
const uint8_t *dat = dat8;
int64_t err = 0;
if (params->r[0] > 0 && params->r[1] > 0) {
__m256i xq_coeff = pair_set_epi16(xq[0], xq[1]);
for (i = 0; i < height; ++i) {
__m256i sum32 = _mm256_setzero_si256();
for (j = 0; j <= width - 16; j += 16) {
const __m256i d0 = _mm256_cvtepu8_epi16(xx_loadu_128(dat + j));
const __m256i s0 = _mm256_cvtepu8_epi16(xx_loadu_128(src + j));
const __m256i flt0_16b = _mm256_permute4x64_epi64(
_mm256_packs_epi32(yy_loadu_256(flt0 + j),
yy_loadu_256(flt0 + j + 8)),
0xd8);
const __m256i flt1_16b = _mm256_permute4x64_epi64(
_mm256_packs_epi32(yy_loadu_256(flt1 + j),
yy_loadu_256(flt1 + j + 8)),
0xd8);
const __m256i u0 = _mm256_slli_epi16(d0, SGRPROJ_RST_BITS);
const __m256i flt0_0_sub_u = _mm256_sub_epi16(flt0_16b, u0);
const __m256i flt1_0_sub_u = _mm256_sub_epi16(flt1_16b, u0);
const __m256i v0 = _mm256_madd_epi16(
xq_coeff, _mm256_unpacklo_epi16(flt0_0_sub_u, flt1_0_sub_u));
const __m256i v1 = _mm256_madd_epi16(
xq_coeff, _mm256_unpackhi_epi16(flt0_0_sub_u, flt1_0_sub_u));
const __m256i vr0 =
_mm256_srai_epi32(_mm256_add_epi32(v0, rounding), shift);
const __m256i vr1 =
_mm256_srai_epi32(_mm256_add_epi32(v1, rounding), shift);
const __m256i e0 = _mm256_sub_epi16(
_mm256_add_epi16(_mm256_packs_epi32(vr0, vr1), d0), s0);
const __m256i err0 = _mm256_madd_epi16(e0, e0);
sum32 = _mm256_add_epi32(sum32, err0);
}
for (k = j; k < width; ++k) {
const int32_t u = (int32_t)(dat[k] << SGRPROJ_RST_BITS);
int32_t v = xq[0] * (flt0[k] - u) + xq[1] * (flt1[k] - u);
const int32_t e = ROUND_POWER_OF_TWO(v, shift) + dat[k] - src[k];
err += ((int64_t)e * e);
}
dat += dat_stride;
src += src_stride;
flt0 += flt0_stride;
flt1 += flt1_stride;
const __m256i sum64_0 =
_mm256_cvtepi32_epi64(_mm256_castsi256_si128(sum32));
const __m256i sum64_1 =
_mm256_cvtepi32_epi64(_mm256_extracti128_si256(sum32, 1));
sum64 = _mm256_add_epi64(sum64, sum64_0);
sum64 = _mm256_add_epi64(sum64, sum64_1);
}
} else if (params->r[0] > 0 || params->r[1] > 0) {
const int xq_active = (params->r[0] > 0) ? xq[0] : xq[1];
const __m256i xq_coeff =
pair_set_epi16(xq_active, -xq_active * (1 << SGRPROJ_RST_BITS));
const int32_t *flt = (params->r[0] > 0) ? flt0 : flt1;
const int flt_stride = (params->r[0] > 0) ? flt0_stride : flt1_stride;
for (i = 0; i < height; ++i) {
__m256i sum32 = _mm256_setzero_si256();
for (j = 0; j <= width - 16; j += 16) {
const __m256i d0 = _mm256_cvtepu8_epi16(xx_loadu_128(dat + j));
const __m256i s0 = _mm256_cvtepu8_epi16(xx_loadu_128(src + j));
const __m256i flt_16b = _mm256_permute4x64_epi64(
_mm256_packs_epi32(yy_loadu_256(flt + j),
yy_loadu_256(flt + j + 8)),
0xd8);
const __m256i v0 =
_mm256_madd_epi16(xq_coeff, _mm256_unpacklo_epi16(flt_16b, d0));
const __m256i v1 =
_mm256_madd_epi16(xq_coeff, _mm256_unpackhi_epi16(flt_16b, d0));
const __m256i vr0 =
_mm256_srai_epi32(_mm256_add_epi32(v0, rounding), shift);
const __m256i vr1 =
_mm256_srai_epi32(_mm256_add_epi32(v1, rounding), shift);
const __m256i e0 = _mm256_sub_epi16(
_mm256_add_epi16(_mm256_packs_epi32(vr0, vr1), d0), s0);
const __m256i err0 = _mm256_madd_epi16(e0, e0);
sum32 = _mm256_add_epi32(sum32, err0);
}
for (k = j; k < width; ++k) {
const int32_t u = (int32_t)(dat[k] << SGRPROJ_RST_BITS);
int32_t v = xq_active * (flt[k] - u);
const int32_t e = ROUND_POWER_OF_TWO(v, shift) + dat[k] - src[k];
err += ((int64_t)e * e);
}
dat += dat_stride;
src += src_stride;
flt += flt_stride;
const __m256i sum64_0 =
_mm256_cvtepi32_epi64(_mm256_castsi256_si128(sum32));
const __m256i sum64_1 =
_mm256_cvtepi32_epi64(_mm256_extracti128_si256(sum32, 1));
sum64 = _mm256_add_epi64(sum64, sum64_0);
sum64 = _mm256_add_epi64(sum64, sum64_1);
}
} else {
__m256i sum32 = _mm256_setzero_si256();
for (i = 0; i < height; ++i) {
for (j = 0; j <= width - 16; j += 16) {
const __m256i d0 = _mm256_cvtepu8_epi16(xx_loadu_128(dat + j));
const __m256i s0 = _mm256_cvtepu8_epi16(xx_loadu_128(src + j));
const __m256i diff0 = _mm256_sub_epi16(d0, s0);
const __m256i err0 = _mm256_madd_epi16(diff0, diff0);
sum32 = _mm256_add_epi32(sum32, err0);
}
for (k = j; k < width; ++k) {
const int32_t e = (int32_t)(dat[k]) - src[k];
err += ((int64_t)e * e);
}
dat += dat_stride;
src += src_stride;
}
const __m256i sum64_0 =
_mm256_cvtepi32_epi64(_mm256_castsi256_si128(sum32));
const __m256i sum64_1 =
_mm256_cvtepi32_epi64(_mm256_extracti128_si256(sum32, 1));
sum64 = _mm256_add_epi64(sum64_0, sum64_1);
}
int64_t sum[4];
yy_storeu_256(sum, sum64);
err += sum[0] + sum[1] + sum[2] + sum[3];
return err;
}
// When params->r[0] > 0 and params->r[1] > 0. In this case all elements of
// C and H need to be computed.
static inline void calc_proj_params_r0_r1_avx2(
const uint8_t *src8, int width, int height, int src_stride,
const uint8_t *dat8, int dat_stride, int32_t *flt0, int flt0_stride,
int32_t *flt1, int flt1_stride, int64_t H[2][2], int64_t C[2]) {
const int size = width * height;
const uint8_t *src = src8;
const uint8_t *dat = dat8;
__m256i h00, h01, h11, c0, c1;
const __m256i zero = _mm256_setzero_si256();
h01 = h11 = c0 = c1 = h00 = zero;
for (int i = 0; i < height; ++i) {
for (int j = 0; j < width; j += 8) {
const __m256i u_load = _mm256_cvtepu8_epi32(
_mm_loadl_epi64((__m128i *)(dat + i * dat_stride + j)));
const __m256i s_load = _mm256_cvtepu8_epi32(
_mm_loadl_epi64((__m128i *)(src + i * src_stride + j)));
__m256i f1 = _mm256_loadu_si256((__m256i *)(flt0 + i * flt0_stride + j));
__m256i f2 = _mm256_loadu_si256((__m256i *)(flt1 + i * flt1_stride + j));
__m256i d = _mm256_slli_epi32(u_load, SGRPROJ_RST_BITS);
__m256i s = _mm256_slli_epi32(s_load, SGRPROJ_RST_BITS);
s = _mm256_sub_epi32(s, d);
f1 = _mm256_sub_epi32(f1, d);
f2 = _mm256_sub_epi32(f2, d);
const __m256i h00_even = _mm256_mul_epi32(f1, f1);
const __m256i h00_odd = _mm256_mul_epi32(_mm256_srli_epi64(f1, 32),
_mm256_srli_epi64(f1, 32));
h00 = _mm256_add_epi64(h00, h00_even);
h00 = _mm256_add_epi64(h00, h00_odd);
const __m256i h01_even = _mm256_mul_epi32(f1, f2);
const __m256i h01_odd = _mm256_mul_epi32(_mm256_srli_epi64(f1, 32),
_mm256_srli_epi64(f2, 32));
h01 = _mm256_add_epi64(h01, h01_even);
h01 = _mm256_add_epi64(h01, h01_odd);
const __m256i h11_even = _mm256_mul_epi32(f2, f2);
const __m256i h11_odd = _mm256_mul_epi32(_mm256_srli_epi64(f2, 32),
_mm256_srli_epi64(f2, 32));
h11 = _mm256_add_epi64(h11, h11_even);
h11 = _mm256_add_epi64(h11, h11_odd);
const __m256i c0_even = _mm256_mul_epi32(f1, s);
const __m256i c0_odd =
_mm256_mul_epi32(_mm256_srli_epi64(f1, 32), _mm256_srli_epi64(s, 32));
c0 = _mm256_add_epi64(c0, c0_even);
c0 = _mm256_add_epi64(c0, c0_odd);
const __m256i c1_even = _mm256_mul_epi32(f2, s);
const __m256i c1_odd =
_mm256_mul_epi32(_mm256_srli_epi64(f2, 32), _mm256_srli_epi64(s, 32));
c1 = _mm256_add_epi64(c1, c1_even);
c1 = _mm256_add_epi64(c1, c1_odd);
}
}
__m256i c_low = _mm256_unpacklo_epi64(c0, c1);
const __m256i c_high = _mm256_unpackhi_epi64(c0, c1);
c_low = _mm256_add_epi64(c_low, c_high);
const __m128i c_128bit = _mm_add_epi64(_mm256_extracti128_si256(c_low, 1),
_mm256_castsi256_si128(c_low));
__m256i h0x_low = _mm256_unpacklo_epi64(h00, h01);
const __m256i h0x_high = _mm256_unpackhi_epi64(h00, h01);
h0x_low = _mm256_add_epi64(h0x_low, h0x_high);
const __m128i h0x_128bit = _mm_add_epi64(_mm256_extracti128_si256(h0x_low, 1),
_mm256_castsi256_si128(h0x_low));
// Using the symmetric properties of H, calculations of H[1][0] are not
// needed.
__m256i h1x_low = _mm256_unpacklo_epi64(zero, h11);
const __m256i h1x_high = _mm256_unpackhi_epi64(zero, h11);
h1x_low = _mm256_add_epi64(h1x_low, h1x_high);
const __m128i h1x_128bit = _mm_add_epi64(_mm256_extracti128_si256(h1x_low, 1),
_mm256_castsi256_si128(h1x_low));
xx_storeu_128(C, c_128bit);
xx_storeu_128(H[0], h0x_128bit);
xx_storeu_128(H[1], h1x_128bit);
H[0][0] /= size;
H[0][1] /= size;
H[1][1] /= size;
// Since H is a symmetric matrix
H[1][0] = H[0][1];
C[0] /= size;
C[1] /= size;
}
// When only params->r[0] > 0. In this case only H[0][0] and C[0] are
// non-zero and need to be computed.
static inline void calc_proj_params_r0_avx2(const uint8_t *src8, int width,
int height, int src_stride,
const uint8_t *dat8, int dat_stride,
int32_t *flt0, int flt0_stride,
int64_t H[2][2], int64_t C[2]) {
const int size = width * height;
const uint8_t *src = src8;
const uint8_t *dat = dat8;
__m256i h00, c0;
const __m256i zero = _mm256_setzero_si256();
c0 = h00 = zero;
for (int i = 0; i < height; ++i) {
for (int j = 0; j < width; j += 8) {
const __m256i u_load = _mm256_cvtepu8_epi32(
_mm_loadl_epi64((__m128i *)(dat + i * dat_stride + j)));
const __m256i s_load = _mm256_cvtepu8_epi32(
_mm_loadl_epi64((__m128i *)(src + i * src_stride + j)));
__m256i f1 = _mm256_loadu_si256((__m256i *)(flt0 + i * flt0_stride + j));
__m256i d = _mm256_slli_epi32(u_load, SGRPROJ_RST_BITS);
__m256i s = _mm256_slli_epi32(s_load, SGRPROJ_RST_BITS);
s = _mm256_sub_epi32(s, d);
f1 = _mm256_sub_epi32(f1, d);
const __m256i h00_even = _mm256_mul_epi32(f1, f1);
const __m256i h00_odd = _mm256_mul_epi32(_mm256_srli_epi64(f1, 32),
_mm256_srli_epi64(f1, 32));
h00 = _mm256_add_epi64(h00, h00_even);
h00 = _mm256_add_epi64(h00, h00_odd);
const __m256i c0_even = _mm256_mul_epi32(f1, s);
const __m256i c0_odd =
_mm256_mul_epi32(_mm256_srli_epi64(f1, 32), _mm256_srli_epi64(s, 32));
c0 = _mm256_add_epi64(c0, c0_even);
c0 = _mm256_add_epi64(c0, c0_odd);
}
}
const __m128i h00_128bit = _mm_add_epi64(_mm256_extracti128_si256(h00, 1),
_mm256_castsi256_si128(h00));
const __m128i h00_val =
_mm_add_epi64(h00_128bit, _mm_srli_si128(h00_128bit, 8));
const __m128i c0_128bit = _mm_add_epi64(_mm256_extracti128_si256(c0, 1),
_mm256_castsi256_si128(c0));
const __m128i c0_val = _mm_add_epi64(c0_128bit, _mm_srli_si128(c0_128bit, 8));
const __m128i c = _mm_unpacklo_epi64(c0_val, _mm256_castsi256_si128(zero));
const __m128i h0x = _mm_unpacklo_epi64(h00_val, _mm256_castsi256_si128(zero));
xx_storeu_128(C, c);
xx_storeu_128(H[0], h0x);
H[0][0] /= size;
C[0] /= size;
}
// When only params->r[1] > 0. In this case only H[1][1] and C[1] are
// non-zero and need to be computed.
static inline void calc_proj_params_r1_avx2(const uint8_t *src8, int width,
int height, int src_stride,
const uint8_t *dat8, int dat_stride,
int32_t *flt1, int flt1_stride,
int64_t H[2][2], int64_t C[2]) {
const int size = width * height;
const uint8_t *src = src8;
const uint8_t *dat = dat8;
__m256i h11, c1;
const __m256i zero = _mm256_setzero_si256();
c1 = h11 = zero;
for (int i = 0; i < height; ++i) {
for (int j = 0; j < width; j += 8) {
const __m256i u_load = _mm256_cvtepu8_epi32(
_mm_loadl_epi64((__m128i *)(dat + i * dat_stride + j)));
const __m256i s_load = _mm256_cvtepu8_epi32(
_mm_loadl_epi64((__m128i *)(src + i * src_stride + j)));
__m256i f2 = _mm256_loadu_si256((__m256i *)(flt1 + i * flt1_stride + j));
__m256i d = _mm256_slli_epi32(u_load, SGRPROJ_RST_BITS);
__m256i s = _mm256_slli_epi32(s_load, SGRPROJ_RST_BITS);
s = _mm256_sub_epi32(s, d);
f2 = _mm256_sub_epi32(f2, d);
const __m256i h11_even = _mm256_mul_epi32(f2, f2);
const __m256i h11_odd = _mm256_mul_epi32(_mm256_srli_epi64(f2, 32),
_mm256_srli_epi64(f2, 32));
h11 = _mm256_add_epi64(h11, h11_even);
h11 = _mm256_add_epi64(h11, h11_odd);
const __m256i c1_even = _mm256_mul_epi32(f2, s);
const __m256i c1_odd =
_mm256_mul_epi32(_mm256_srli_epi64(f2, 32), _mm256_srli_epi64(s, 32));
c1 = _mm256_add_epi64(c1, c1_even);
c1 = _mm256_add_epi64(c1, c1_odd);
}
}
const __m128i h11_128bit = _mm_add_epi64(_mm256_extracti128_si256(h11, 1),
_mm256_castsi256_si128(h11));
const __m128i h11_val =
_mm_add_epi64(h11_128bit, _mm_srli_si128(h11_128bit, 8));
const __m128i c1_128bit = _mm_add_epi64(_mm256_extracti128_si256(c1, 1),
_mm256_castsi256_si128(c1));
const __m128i c1_val = _mm_add_epi64(c1_128bit, _mm_srli_si128(c1_128bit, 8));
const __m128i c = _mm_unpacklo_epi64(_mm256_castsi256_si128(zero), c1_val);
const __m128i h1x = _mm_unpacklo_epi64(_mm256_castsi256_si128(zero), h11_val);
xx_storeu_128(C, c);
xx_storeu_128(H[1], h1x);
H[1][1] /= size;
C[1] /= size;
}
// AVX2 variant of av1_calc_proj_params_c.
void av1_calc_proj_params_avx2(const uint8_t *src8, int width, int height,
int src_stride, const uint8_t *dat8,
int dat_stride, int32_t *flt0, int flt0_stride,
int32_t *flt1, int flt1_stride, int64_t H[2][2],
int64_t C[2], const sgr_params_type *params) {
if ((params->r[0] > 0) && (params->r[1] > 0)) {
calc_proj_params_r0_r1_avx2(src8, width, height, src_stride, dat8,
dat_stride, flt0, flt0_stride, flt1,
flt1_stride, H, C);
} else if (params->r[0] > 0) {
calc_proj_params_r0_avx2(src8, width, height, src_stride, dat8, dat_stride,
flt0, flt0_stride, H, C);
} else if (params->r[1] > 0) {
calc_proj_params_r1_avx2(src8, width, height, src_stride, dat8, dat_stride,
flt1, flt1_stride, H, C);
}
}
#if CONFIG_AV1_HIGHBITDEPTH
static inline void calc_proj_params_r0_r1_high_bd_avx2(
const uint8_t *src8, int width, int height, int src_stride,
const uint8_t *dat8, int dat_stride, int32_t *flt0, int flt0_stride,
int32_t *flt1, int flt1_stride, int64_t H[2][2], int64_t C[2]) {
const int size = width * height;
const uint16_t *src = CONVERT_TO_SHORTPTR(src8);
const uint16_t *dat = CONVERT_TO_SHORTPTR(dat8);
__m256i h00, h01, h11, c0, c1;
const __m256i zero = _mm256_setzero_si256();
h01 = h11 = c0 = c1 = h00 = zero;
for (int i = 0; i < height; ++i) {
for (int j = 0; j < width; j += 8) {
const __m256i u_load = _mm256_cvtepu16_epi32(
_mm_load_si128((__m128i *)(dat + i * dat_stride + j)));
const __m256i s_load = _mm256_cvtepu16_epi32(
_mm_load_si128((__m128i *)(src + i * src_stride + j)));
__m256i f1 = _mm256_loadu_si256((__m256i *)(flt0 + i * flt0_stride + j));
__m256i f2 = _mm256_loadu_si256((__m256i *)(flt1 + i * flt1_stride + j));
__m256i d = _mm256_slli_epi32(u_load, SGRPROJ_RST_BITS);
__m256i s = _mm256_slli_epi32(s_load, SGRPROJ_RST_BITS);
s = _mm256_sub_epi32(s, d);
f1 = _mm256_sub_epi32(f1, d);
f2 = _mm256_sub_epi32(f2, d);
const __m256i h00_even = _mm256_mul_epi32(f1, f1);
const __m256i h00_odd = _mm256_mul_epi32(_mm256_srli_epi64(f1, 32),
_mm256_srli_epi64(f1, 32));
h00 = _mm256_add_epi64(h00, h00_even);
h00 = _mm256_add_epi64(h00, h00_odd);
const __m256i h01_even = _mm256_mul_epi32(f1, f2);
const __m256i h01_odd = _mm256_mul_epi32(_mm256_srli_epi64(f1, 32),
_mm256_srli_epi64(f2, 32));
h01 = _mm256_add_epi64(h01, h01_even);
h01 = _mm256_add_epi64(h01, h01_odd);
const __m256i h11_even = _mm256_mul_epi32(f2, f2);
const __m256i h11_odd = _mm256_mul_epi32(_mm256_srli_epi64(f2, 32),
_mm256_srli_epi64(f2, 32));
h11 = _mm256_add_epi64(h11, h11_even);
h11 = _mm256_add_epi64(h11, h11_odd);
const __m256i c0_even = _mm256_mul_epi32(f1, s);
const __m256i c0_odd =
_mm256_mul_epi32(_mm256_srli_epi64(f1, 32), _mm256_srli_epi64(s, 32));
c0 = _mm256_add_epi64(c0, c0_even);
c0 = _mm256_add_epi64(c0, c0_odd);
const __m256i c1_even = _mm256_mul_epi32(f2, s);
const __m256i c1_odd =
_mm256_mul_epi32(_mm256_srli_epi64(f2, 32), _mm256_srli_epi64(s, 32));
c1 = _mm256_add_epi64(c1, c1_even);
c1 = _mm256_add_epi64(c1, c1_odd);
}
}
__m256i c_low = _mm256_unpacklo_epi64(c0, c1);
const __m256i c_high = _mm256_unpackhi_epi64(c0, c1);
c_low = _mm256_add_epi64(c_low, c_high);
const __m128i c_128bit = _mm_add_epi64(_mm256_extracti128_si256(c_low, 1),
_mm256_castsi256_si128(c_low));
__m256i h0x_low = _mm256_unpacklo_epi64(h00, h01);
const __m256i h0x_high = _mm256_unpackhi_epi64(h00, h01);
h0x_low = _mm256_add_epi64(h0x_low, h0x_high);
const __m128i h0x_128bit = _mm_add_epi64(_mm256_extracti128_si256(h0x_low, 1),
_mm256_castsi256_si128(h0x_low));
// Using the symmetric properties of H, calculations of H[1][0] are not
// needed.
__m256i h1x_low = _mm256_unpacklo_epi64(zero, h11);
const __m256i h1x_high = _mm256_unpackhi_epi64(zero, h11);
h1x_low = _mm256_add_epi64(h1x_low, h1x_high);
const __m128i h1x_128bit = _mm_add_epi64(_mm256_extracti128_si256(h1x_low, 1),
_mm256_castsi256_si128(h1x_low));
xx_storeu_128(C, c_128bit);
xx_storeu_128(H[0], h0x_128bit);
xx_storeu_128(H[1], h1x_128bit);
H[0][0] /= size;
H[0][1] /= size;
H[1][1] /= size;
// Since H is a symmetric matrix
H[1][0] = H[0][1];
C[0] /= size;
C[1] /= size;
}
static inline void calc_proj_params_r0_high_bd_avx2(
const uint8_t *src8, int width, int height, int src_stride,
const uint8_t *dat8, int dat_stride, int32_t *flt0, int flt0_stride,
int64_t H[2][2], int64_t C[2]) {
const int size = width * height;
const uint16_t *src = CONVERT_TO_SHORTPTR(src8);
const uint16_t *dat = CONVERT_TO_SHORTPTR(dat8);
__m256i h00, c0;
const __m256i zero = _mm256_setzero_si256();
c0 = h00 = zero;
for (int i = 0; i < height; ++i) {
for (int j = 0; j < width; j += 8) {
const __m256i u_load = _mm256_cvtepu16_epi32(
_mm_load_si128((__m128i *)(dat + i * dat_stride + j)));
const __m256i s_load = _mm256_cvtepu16_epi32(
_mm_load_si128((__m128i *)(src + i * src_stride + j)));
__m256i f1 = _mm256_loadu_si256((__m256i *)(flt0 + i * flt0_stride + j));
__m256i d = _mm256_slli_epi32(u_load, SGRPROJ_RST_BITS);
__m256i s = _mm256_slli_epi32(s_load, SGRPROJ_RST_BITS);
s = _mm256_sub_epi32(s, d);
f1 = _mm256_sub_epi32(f1, d);
const __m256i h00_even = _mm256_mul_epi32(f1, f1);
const __m256i h00_odd = _mm256_mul_epi32(_mm256_srli_epi64(f1, 32),
_mm256_srli_epi64(f1, 32));
h00 = _mm256_add_epi64(h00, h00_even);
h00 = _mm256_add_epi64(h00, h00_odd);
const __m256i c0_even = _mm256_mul_epi32(f1, s);
const __m256i c0_odd =
_mm256_mul_epi32(_mm256_srli_epi64(f1, 32), _mm256_srli_epi64(s, 32));
c0 = _mm256_add_epi64(c0, c0_even);
c0 = _mm256_add_epi64(c0, c0_odd);
}
}
const __m128i h00_128bit = _mm_add_epi64(_mm256_extracti128_si256(h00, 1),
_mm256_castsi256_si128(h00));
const __m128i h00_val =
_mm_add_epi64(h00_128bit, _mm_srli_si128(h00_128bit, 8));
const __m128i c0_128bit = _mm_add_epi64(_mm256_extracti128_si256(c0, 1),
_mm256_castsi256_si128(c0));
const __m128i c0_val = _mm_add_epi64(c0_128bit, _mm_srli_si128(c0_128bit, 8));
const __m128i c = _mm_unpacklo_epi64(c0_val, _mm256_castsi256_si128(zero));
const __m128i h0x = _mm_unpacklo_epi64(h00_val, _mm256_castsi256_si128(zero));
xx_storeu_128(C, c);
xx_storeu_128(H[0], h0x);
H[0][0] /= size;
C[0] /= size;
}
static inline void calc_proj_params_r1_high_bd_avx2(
const uint8_t *src8, int width, int height, int src_stride,
const uint8_t *dat8, int dat_stride, int32_t *flt1, int flt1_stride,
int64_t H[2][2], int64_t C[2]) {
const int size = width * height;
const uint16_t *src = CONVERT_TO_SHORTPTR(src8);
const uint16_t *dat = CONVERT_TO_SHORTPTR(dat8);
__m256i h11, c1;
const __m256i zero = _mm256_setzero_si256();
c1 = h11 = zero;
for (int i = 0; i < height; ++i) {
for (int j = 0; j < width; j += 8) {
const __m256i u_load = _mm256_cvtepu16_epi32(
_mm_load_si128((__m128i *)(dat + i * dat_stride + j)));
const __m256i s_load = _mm256_cvtepu16_epi32(
_mm_load_si128((__m128i *)(src + i * src_stride + j)));
__m256i f2 = _mm256_loadu_si256((__m256i *)(flt1 + i * flt1_stride + j));
__m256i d = _mm256_slli_epi32(u_load, SGRPROJ_RST_BITS);
__m256i s = _mm256_slli_epi32(s_load, SGRPROJ_RST_BITS);
s = _mm256_sub_epi32(s, d);
f2 = _mm256_sub_epi32(f2, d);
const __m256i h11_even = _mm256_mul_epi32(f2, f2);
const __m256i h11_odd = _mm256_mul_epi32(_mm256_srli_epi64(f2, 32),
_mm256_srli_epi64(f2, 32));
h11 = _mm256_add_epi64(h11, h11_even);
h11 = _mm256_add_epi64(h11, h11_odd);
const __m256i c1_even = _mm256_mul_epi32(f2, s);
const __m256i c1_odd =
_mm256_mul_epi32(_mm256_srli_epi64(f2, 32), _mm256_srli_epi64(s, 32));
c1 = _mm256_add_epi64(c1, c1_even);
c1 = _mm256_add_epi64(c1, c1_odd);
}
}
const __m128i h11_128bit = _mm_add_epi64(_mm256_extracti128_si256(h11, 1),
_mm256_castsi256_si128(h11));
const __m128i h11_val =
_mm_add_epi64(h11_128bit, _mm_srli_si128(h11_128bit, 8));
const __m128i c1_128bit = _mm_add_epi64(_mm256_extracti128_si256(c1, 1),
_mm256_castsi256_si128(c1));
const __m128i c1_val = _mm_add_epi64(c1_128bit, _mm_srli_si128(c1_128bit, 8));
const __m128i c = _mm_unpacklo_epi64(_mm256_castsi256_si128(zero), c1_val);
const __m128i h1x = _mm_unpacklo_epi64(_mm256_castsi256_si128(zero), h11_val);
xx_storeu_128(C, c);
xx_storeu_128(H[1], h1x);
H[1][1] /= size;
C[1] /= size;
}
// AVX2 variant of av1_calc_proj_params_high_bd_c.
void av1_calc_proj_params_high_bd_avx2(const uint8_t *src8, int width,
int height, int src_stride,
const uint8_t *dat8, int dat_stride,
int32_t *flt0, int flt0_stride,
int32_t *flt1, int flt1_stride,
int64_t H[2][2], int64_t C[2],
const sgr_params_type *params) {
if ((params->r[0] > 0) && (params->r[1] > 0)) {
calc_proj_params_r0_r1_high_bd_avx2(src8, width, height, src_stride, dat8,
dat_stride, flt0, flt0_stride, flt1,
flt1_stride, H, C);
} else if (params->r[0] > 0) {
calc_proj_params_r0_high_bd_avx2(src8, width, height, src_stride, dat8,
dat_stride, flt0, flt0_stride, H, C);
} else if (params->r[1] > 0) {
calc_proj_params_r1_high_bd_avx2(src8, width, height, src_stride, dat8,
dat_stride, flt1, flt1_stride, H, C);
}
}
int64_t av1_highbd_pixel_proj_error_avx2(
const uint8_t *src8, int width, int height, int src_stride,
const uint8_t *dat8, int dat_stride, int32_t *flt0, int flt0_stride,
int32_t *flt1, int flt1_stride, int xq[2], const sgr_params_type *params) {
int i, j, k;
const int32_t shift = SGRPROJ_RST_BITS + SGRPROJ_PRJ_BITS;
const __m256i rounding = _mm256_set1_epi32(1 << (shift - 1));
__m256i sum64 = _mm256_setzero_si256();
const uint16_t *src = CONVERT_TO_SHORTPTR(src8);
const uint16_t *dat = CONVERT_TO_SHORTPTR(dat8);
int64_t err = 0;
if (params->r[0] > 0 && params->r[1] > 0) { // Both filters are enabled
const __m256i xq0 = _mm256_set1_epi32(xq[0]);
const __m256i xq1 = _mm256_set1_epi32(xq[1]);
for (i = 0; i < height; ++i) {
__m256i sum32 = _mm256_setzero_si256();
for (j = 0; j <= width - 16; j += 16) { // Process 16 pixels at a time
// Load 16 pixels each from source image and corrupted image
const __m256i s0 = yy_loadu_256(src + j);
const __m256i d0 = yy_loadu_256(dat + j);
// s0 = [15 14 13 12 11 10 9 8] [7 6 5 4 3 2 1 0] as u16 (indices)
// Shift-up each pixel to match filtered image scaling
const __m256i u0 = _mm256_slli_epi16(d0, SGRPROJ_RST_BITS);
// Split u0 into two halves and pad each from u16 to i32
const __m256i u0l = _mm256_cvtepu16_epi32(_mm256_castsi256_si128(u0));
const __m256i u0h =
_mm256_cvtepu16_epi32(_mm256_extracti128_si256(u0, 1));
// u0h, u0l = [15 14 13 12] [11 10 9 8], [7 6 5 4] [3 2 1 0] as u32
// Load 16 pixels from each filtered image
const __m256i flt0l = yy_loadu_256(flt0 + j);
const __m256i flt0h = yy_loadu_256(flt0 + j + 8);
const __m256i flt1l = yy_loadu_256(flt1 + j);
const __m256i flt1h = yy_loadu_256(flt1 + j + 8);
// flt?l, flt?h = [15 14 13 12] [11 10 9 8], [7 6 5 4] [3 2 1 0] as u32
// Subtract shifted corrupt image from each filtered image
const __m256i flt0l_subu = _mm256_sub_epi32(flt0l, u0l);
const __m256i flt0h_subu = _mm256_sub_epi32(flt0h, u0h);
const __m256i flt1l_subu = _mm256_sub_epi32(flt1l, u0l);
const __m256i flt1h_subu = _mm256_sub_epi32(flt1h, u0h);
// Multiply basis vectors by appropriate coefficients
const __m256i v0l = _mm256_mullo_epi32(flt0l_subu, xq0);
const __m256i v0h = _mm256_mullo_epi32(flt0h_subu, xq0);
const __m256i v1l = _mm256_mullo_epi32(flt1l_subu, xq1);
const __m256i v1h = _mm256_mullo_epi32(flt1h_subu, xq1);
// Add together the contributions from the two basis vectors
const __m256i vl = _mm256_add_epi32(v0l, v1l);
const __m256i vh = _mm256_add_epi32(v0h, v1h);
// Right-shift v with appropriate rounding
const __m256i vrl =
_mm256_srai_epi32(_mm256_add_epi32(vl, rounding), shift);
const __m256i vrh =
_mm256_srai_epi32(_mm256_add_epi32(vh, rounding), shift);
// vrh, vrl = [15 14 13 12] [11 10 9 8], [7 6 5 4] [3 2 1 0]
// Saturate each i32 to an i16 then combine both halves
// The permute (control=[3 1 2 0]) fixes weird ordering from AVX lanes
const __m256i vr =
_mm256_permute4x64_epi64(_mm256_packs_epi32(vrl, vrh), 0xd8);
// intermediate = [15 14 13 12 7 6 5 4] [11 10 9 8 3 2 1 0]
// vr = [15 14 13 12 11 10 9 8] [7 6 5 4 3 2 1 0]
// Add twin-subspace-sgr-filter to corrupt image then subtract source
const __m256i e0 = _mm256_sub_epi16(_mm256_add_epi16(vr, d0), s0);
// Calculate squared error and add adjacent values
const __m256i err0 = _mm256_madd_epi16(e0, e0);
sum32 = _mm256_add_epi32(sum32, err0);
}
const __m256i sum32l =
_mm256_cvtepu32_epi64(_mm256_castsi256_si128(sum32));
sum64 = _mm256_add_epi64(sum64, sum32l);
const __m256i sum32h =
_mm256_cvtepu32_epi64(_mm256_extracti128_si256(sum32, 1));
sum64 = _mm256_add_epi64(sum64, sum32h);
// Process remaining pixels in this row (modulo 16)
for (k = j; k < width; ++k) {
const int32_t u = (int32_t)(dat[k] << SGRPROJ_RST_BITS);
int32_t v = xq[0] * (flt0[k] - u) + xq[1] * (flt1[k] - u);
const int32_t e = ROUND_POWER_OF_TWO(v, shift) + dat[k] - src[k];
err += ((int64_t)e * e);
}
dat += dat_stride;
src += src_stride;
flt0 += flt0_stride;
flt1 += flt1_stride;
}
} else if (params->r[0] > 0 || params->r[1] > 0) { // Only one filter enabled
const int32_t xq_on = (params->r[0] > 0) ? xq[0] : xq[1];
const __m256i xq_active = _mm256_set1_epi32(xq_on);
const __m256i xq_inactive =
_mm256_set1_epi32(-xq_on * (1 << SGRPROJ_RST_BITS));
const int32_t *flt = (params->r[0] > 0) ? flt0 : flt1;
const int flt_stride = (params->r[0] > 0) ? flt0_stride : flt1_stride;
for (i = 0; i < height; ++i) {
__m256i sum32 = _mm256_setzero_si256();
for (j = 0; j <= width - 16; j += 16) {
// Load 16 pixels from source image
const __m256i s0 = yy_loadu_256(src + j);
// s0 = [15 14 13 12 11 10 9 8] [7 6 5 4 3 2 1 0] as u16
// Load 16 pixels from corrupted image and pad each u16 to i32
const __m256i d0 = yy_loadu_256(dat + j);
const __m256i d0h =
_mm256_cvtepu16_epi32(_mm256_extracti128_si256(d0, 1));
const __m256i d0l = _mm256_cvtepu16_epi32(_mm256_castsi256_si128(d0));
// d0 = [15 14 13 12 11 10 9 8] [7 6 5 4 3 2 1 0] as u16
// d0h, d0l = [15 14 13 12] [11 10 9 8], [7 6 5 4] [3 2 1 0] as i32
// Load 16 pixels from the filtered image
const __m256i flth = yy_loadu_256(flt + j + 8);
const __m256i fltl = yy_loadu_256(flt + j);
// flth, fltl = [15 14 13 12] [11 10 9 8], [7 6 5 4] [3 2 1 0] as i32
const __m256i flth_xq = _mm256_mullo_epi32(flth, xq_active);
const __m256i fltl_xq = _mm256_mullo_epi32(fltl, xq_active);
const __m256i d0h_xq = _mm256_mullo_epi32(d0h, xq_inactive);
const __m256i d0l_xq = _mm256_mullo_epi32(d0l, xq_inactive);
const __m256i vh = _mm256_add_epi32(flth_xq, d0h_xq);
const __m256i vl = _mm256_add_epi32(fltl_xq, d0l_xq);
// Shift this down with appropriate rounding
const __m256i vrh =
_mm256_srai_epi32(_mm256_add_epi32(vh, rounding), shift);
const __m256i vrl =
_mm256_srai_epi32(_mm256_add_epi32(vl, rounding), shift);
// vrh, vrl = [15 14 13 12] [11 10 9 8], [7 6 5 4] [3 2 1 0] as i32
// Saturate each i32 to an i16 then combine both halves
// The permute (control=[3 1 2 0]) fixes weird ordering from AVX lanes
const __m256i vr =
_mm256_permute4x64_epi64(_mm256_packs_epi32(vrl, vrh), 0xd8);
// intermediate = [15 14 13 12 7 6 5 4] [11 10 9 8 3 2 1 0] as u16
// vr = [15 14 13 12 11 10 9 8] [7 6 5 4 3 2 1 0] as u16
// Subtract twin-subspace-sgr filtered from source image to get error
const __m256i e0 = _mm256_sub_epi16(_mm256_add_epi16(vr, d0), s0);
// Calculate squared error and add adjacent values
const __m256i err0 = _mm256_madd_epi16(e0, e0);
sum32 = _mm256_add_epi32(sum32, err0);
}
const __m256i sum32l =
_mm256_cvtepu32_epi64(_mm256_castsi256_si128(sum32));
sum64 = _mm256_add_epi64(sum64, sum32l);
const __m256i sum32h =
_mm256_cvtepu32_epi64(_mm256_extracti128_si256(sum32, 1));
sum64 = _mm256_add_epi64(sum64, sum32h);
// Process remaining pixels in this row (modulo 16)
for (k = j; k < width; ++k) {
const int32_t u = (int32_t)(dat[k] << SGRPROJ_RST_BITS);
int32_t v = xq_on * (flt[k] - u);
const int32_t e = ROUND_POWER_OF_TWO(v, shift) + dat[k] - src[k];
err += ((int64_t)e * e);
}
dat += dat_stride;
src += src_stride;
flt += flt_stride;
}
} else { // Neither filter is enabled
for (i = 0; i < height; ++i) {
__m256i sum32 = _mm256_setzero_si256();
for (j = 0; j <= width - 32; j += 32) {
// Load 2x16 u16 from source image
const __m256i s0l = yy_loadu_256(src + j);
const __m256i s0h = yy_loadu_256(src + j + 16);
// Load 2x16 u16 from corrupted image
const __m256i d0l = yy_loadu_256(dat + j);
const __m256i d0h = yy_loadu_256(dat + j + 16);
// Subtract corrupted image from source image
const __m256i diffl = _mm256_sub_epi16(d0l, s0l);
const __m256i diffh = _mm256_sub_epi16(d0h, s0h);
// Square error and add adjacent values
const __m256i err0l = _mm256_madd_epi16(diffl, diffl);
const __m256i err0h = _mm256_madd_epi16(diffh, diffh);
sum32 = _mm256_add_epi32(sum32, err0l);
sum32 = _mm256_add_epi32(sum32, err0h);
}
const __m256i sum32l =
_mm256_cvtepu32_epi64(_mm256_castsi256_si128(sum32));
sum64 = _mm256_add_epi64(sum64, sum32l);
const __m256i sum32h =
_mm256_cvtepu32_epi64(_mm256_extracti128_si256(sum32, 1));
sum64 = _mm256_add_epi64(sum64, sum32h);
// Process remaining pixels (modulu 16)
for (k = j; k < width; ++k) {
const int32_t e = (int32_t)(dat[k]) - src[k];
err += ((int64_t)e * e);
}
dat += dat_stride;
src += src_stride;
}
}
// Sum 4 values from sum64l and sum64h into err
int64_t sum[4];
yy_storeu_256(sum, sum64);
err += sum[0] + sum[1] + sum[2] + sum[3];
return err;
}
#endif // CONFIG_AV1_HIGHBITDEPTH