Source code
Revision control
Copy as Markdown
Other Tools
/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*-
* vim: set ts=8 sts=2 et sw=2 tw=80:
*/
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
#include "mozilla/FloatingPoint.h"
#include "mozilla/IntegerTypeTraits.h"
#include <iterator>
#include "jit/ABIFunctions.h"
#include "jit/IonAnalysis.h"
#include "jit/Linker.h"
#include "jit/MacroAssembler.h"
#include "jit/MIRGenerator.h"
#include "jit/MIRGraph.h"
#include "jit/ValueNumbering.h"
#include "jit/VMFunctions.h"
#include "js/Value.h"
#include "jsapi-tests/tests.h"
#include "jsapi-tests/testsJit.h"
#include "jit/ABIFunctionList-inl.h"
#include "jit/MacroAssembler-inl.h"
#include "jit/VMFunctionList-inl.h"
using namespace js;
using namespace js::jit;
// This test case relies on VMFUNCTION_LIST, ABIFUNCTION_LIST,
// ABIFUNCTION_AND_TYPE_LIST and ABIFUNCTIONSIG_LIST, to create a test case for
// each function registered, in order to check if the arguments are properly
// being interpreted after a call from the JIT.
//
// This test checks that the interpretation of the C++ compiler matches the
// interpretation of the JIT. It works by generating a call to a function which
// has the same signature as the tested function. The function being called
// re-interprets the arguments' content to ensure that it matches the content
// given as arguments by the JIT.
//
// These tests cases succeed if the content provided by the JIT matches the
// content read by the C++ code. Otherwise, a failure implies that either the
// MacroAssembler is not used properly, or that the code used by the JIT to
// generate the function call does not match the ABI of the targeted system.
// Convert the content of each macro list to a single and unique format which is
// (Name, Type).
#define ABIFUN_TO_ALLFUN(Fun) (#Fun, decltype(&::Fun))
#define ABIFUN_AND_SIG_TO_ALLFUN(Fun, Sig) (#Fun " as " #Sig, Sig)
#define ABISIG_TO_ALLFUN(Sig) ("(none) as " #Sig, Sig)
#define VMFUN_TO_ALLFUN(Name, Fun, Pop...) (#Fun, decltype(&::Fun))
#define APPLY(A, B) A B
// Generate macro calls for all the lists which are used to allow, directly or
// indirectly, calls performed with callWithABI.
//
// This macro will delegate to a different macro call based on the type of the
// list the element is extracted from.
#define ALL_FUNCTIONS(PREFIX) \
ABIFUNCTION_LIST(PREFIX##_ABIFUN_TO_ALLFUN) \
ABIFUNCTION_AND_TYPE_LIST(PREFIX##_ABIFUN_AND_SIG_TO_ALLFUN) \
ABIFUNCTIONSIG_LIST(PREFIX##_ABISIG_TO_ALLFUN) \
VMFUNCTION_LIST(PREFIX##_VMFUN_TO_ALLFUN)
// sizeof(const T&) is not equal to sizeof(const T*), but references are passed
// as pointers.
//
// "When applied to a reference or a reference type, the result is the size of
// the referenced type." [expr.sizeof] (5.3.3.2)
//
// The following functions avoid this issue by wrapping the type in a structure
// which will share the same property, even if the wrapped type is a reference.
template <typename T>
constexpr size_t ActualSizeOf() {
struct Wrapper {
T _unused;
};
return sizeof(Wrapper);
}
template <typename T>
constexpr size_t ActualAlignOf() {
struct Wrapper {
T _unused;
};
return alignof(Wrapper);
}
// Given a type, return the integer type which has the same size.
template <typename T>
using IntTypeOf_t =
typename mozilla::UnsignedStdintTypeForSize<ActualSizeOf<T>()>::Type;
// Concatenate 2 std::integer_sequence, and return an std::integer_sequence with
// the content of both parameters.
template <typename Before, typename After>
struct Concat;
template <typename Int, Int... Before, Int... After>
struct Concat<std::integer_sequence<Int, Before...>,
std::integer_sequence<Int, After...>> {
using type = std::integer_sequence<Int, Before..., After...>;
};
template <typename Before, typename After>
using Concat_t = typename Concat<Before, After>::type;
static_assert(std::is_same_v<Concat_t<std::integer_sequence<uint8_t, 1, 2>,
std::integer_sequence<uint8_t, 3, 4>>,
std::integer_sequence<uint8_t, 1, 2, 3, 4>>);
// Generate an std::integer_sequence of `N` elements, where each element is an
// uint8_t integer with value `Value`.
template <size_t N, uint8_t Value>
constexpr auto CstSeq() {
if constexpr (N == 0) {
return std::integer_sequence<uint8_t>{};
} else {
return Concat_t<std::integer_sequence<uint8_t, Value>,
decltype(CstSeq<N - 1, Value>())>{};
}
}
template <size_t N, uint8_t Value>
using CstSeq_t = decltype(CstSeq<N, Value>());
static_assert(
std::is_same_v<CstSeq_t<4, 2>, std::integer_sequence<uint8_t, 2, 2, 2, 2>>);
// Computes the number of bytes to add before a type in order to align it in
// memory.
constexpr size_t PadBytes(size_t size, size_t align) {
return (align - (size % align)) % align;
}
// Request a minimum alignment for the values added to a buffer in order to
// account for the read size used by the MoveOperand given as an argument of
// passWithABI. The MoveOperand does not take into consideration the size of
// the data being transfered, and might load a larger amount of data.
//
// This function ensures that the MoveOperand would read the 0x55 padding added
// after each value, when it reads too much.
constexpr size_t AtLeastSize() { return sizeof(uintptr_t); }
// Returns the size which needs to be added in addition to the memory consumed
// by the type, from which the size if given as argument.
template <typename Type>
constexpr size_t BackPadBytes() {
return std::max(AtLeastSize(), ActualSizeOf<Type>()) - ActualSizeOf<Type>();
}
// Adds the padding and the reserved size for storing a value in a buffer which
// can be read by a MoveOperand.
template <typename Type>
constexpr size_t PadSize(size_t size) {
return PadBytes(size, ActualAlignOf<Type>()) + ActualSizeOf<Type>() +
BackPadBytes<Type>();
}
// Generate an std::integer_sequence of 0:uint8_t elements of the size of the
// padding needed to align a type in memory.
template <size_t Align, size_t CurrSize>
using PadSeq_t = decltype(CstSeq<PadBytes(CurrSize, Align), 0>());
static_assert(std::is_same_v<PadSeq_t<4, 0>, std::integer_sequence<uint8_t>>);
static_assert(
std::is_same_v<PadSeq_t<4, 3>, std::integer_sequence<uint8_t, 0>>);
static_assert(
std::is_same_v<PadSeq_t<4, 2>, std::integer_sequence<uint8_t, 0, 0>>);
static_assert(
std::is_same_v<PadSeq_t<4, 1>, std::integer_sequence<uint8_t, 0, 0, 0>>);
// Spread an integer value `Value` into a new std::integer_sequence of `N`
// uint8_t elements, using Little Endian ordering of bytes.
template <size_t N, uint64_t Value, uint8_t... Rest>
constexpr auto FillLESeq() {
if constexpr (N == 0) {
return std::integer_sequence<uint8_t, Rest...>{};
} else {
return FillLESeq<N - 1, (Value >> 8), Rest..., uint8_t(Value & 0xff)>();
}
}
template <size_t N, uint64_t Value>
using FillSeq_t = decltype(FillLESeq<N, Value>());
static_assert(std::is_same_v<FillSeq_t<4, 2>,
std::integer_sequence<uint8_t, 2, 0, 0, 0>>);
// Given a list of template parameters, generate an std::integer_sequence of
// size_t, where each element is 1 larger than the previous one. The generated
// sequence starts at 0.
template <typename... Args>
using ArgsIndexes_t =
std::make_integer_sequence<uint64_t, uint64_t(sizeof...(Args))>;
static_assert(std::is_same_v<ArgsIndexes_t<uint8_t, uint64_t>,
std::integer_sequence<uint64_t, 0, 1>>);
// Extract a single bit for each element of an std::integer_sequence. This is
// used to work around some restrictions with providing boolean arguments,
// which might be truncated to a single bit.
template <size_t Bit, typename IntSeq>
struct ExtractBit;
template <size_t Bit, uint64_t... Values>
struct ExtractBit<Bit, std::integer_sequence<uint64_t, Values...>> {
using type = std::integer_sequence<uint64_t, (Values >> Bit) & 1 ...>;
};
// Generate an std::integer_sequence of indexes which are filtered for a single
// bit, such that it can be used with boolean types.
template <size_t Bit, typename... Args>
using ArgsBitOfIndexes_t =
typename ExtractBit<Bit, ArgsIndexes_t<Args...>>::type;
static_assert(std::is_same_v<ArgsBitOfIndexes_t<0, int, int, int, int>,
std::integer_sequence<uint64_t, 0, 1, 0, 1>>);
static_assert(std::is_same_v<ArgsBitOfIndexes_t<1, int, int, int, int>,
std::integer_sequence<uint64_t, 0, 0, 1, 1>>);
// Compute the offset of each argument in a buffer produced by GenArgsBuffer,
// this is used to fill the MoveOperand displacement field when loading value
// out of the buffer produced by GenArgsBuffer.
template <uint64_t Size, typename... Args>
struct ArgsOffsets;
template <uint64_t Size>
struct ArgsOffsets<Size> {
using type = std::integer_sequence<uint64_t>;
};
template <uint64_t Size, typename Arg, typename... Args>
struct ArgsOffsets<Size, Arg, Args...> {
using type =
Concat_t<std::integer_sequence<
uint64_t, Size + PadBytes(Size, ActualAlignOf<Arg>())>,
typename ArgsOffsets<Size + PadSize<Arg>(Size), Args...>::type>;
};
template <uint64_t Size, typename... Args>
using ArgsOffsets_t = typename ArgsOffsets<Size, Args...>::type;
// Not all 32bits architecture align uint64_t type on 8 bytes, so check the
// validity of the stored content based on the alignment of the architecture.
static_assert(ActualAlignOf<uint64_t>() != 8 ||
std::is_same_v<ArgsOffsets_t<0, uint8_t, uint64_t, bool>,
std::integer_sequence<uint64_t, 0, 8, 16>>);
static_assert(ActualAlignOf<uint64_t>() != 4 ||
std::is_same_v<ArgsOffsets_t<0, uint8_t, uint64_t, bool>,
std::integer_sequence<uint64_t, 0, 4, 12>>);
// Generate an std::integer_sequence containing the size of each argument in
// memory.
template <typename... Args>
using ArgsSizes_t = std::integer_sequence<uint64_t, ActualSizeOf<Args>()...>;
// Generate an std::integer_sequence containing values where all valid bits for
// each type are set to 1.
template <typename Type>
constexpr uint64_t FillBits() {
constexpr uint64_t topBit = uint64_t(1) << ((8 * ActualSizeOf<Type>()) - 1);
if constexpr (std::is_same_v<Type, bool>) {
return uint64_t(1);
} else if constexpr (std::is_same_v<Type, double> ||
std::is_same_v<Type, float>) {
// A NaN has all the bits of its exponent set to 1. The CPU / C++ does not
// garantee keeping the payload of NaN values, when interpreted as floating
// point, which could cause some random failures. This removes one bit from
// the exponent, such that the floating point value is not converted to a
// canonicalized NaN by the time we compare it.
constexpr uint64_t lowExpBit =
uint64_t(1) << mozilla::FloatingPoint<Type>::kExponentShift;
return uint64_t((topBit - 1) + topBit - lowExpBit);
} else {
// Note: Keep parentheses to avoid unwanted overflow.
return uint64_t((topBit - 1) + topBit);
}
}
template <typename... Args>
using ArgsFillBits_t = std::integer_sequence<uint64_t, FillBits<Args>()...>;
// Given a type, return the ABIType used by passABIArg to know how to
// interpret the value which are given as arguments.
template <typename Type>
constexpr ABIType TypeToABIType() {
if constexpr (std::is_same_v<Type, float>) {
return ABIType::Float32;
} else if constexpr (std::is_same_v<Type, double>) {
return ABIType::Float64;
} else {
return ABIType::General;
}
}
// Generate a sequence which contains the associated ABIType of each argument.
// Note, a new class is defined because C++ header of clang are rejecting the
// option of having an enumerated type as argument of std::integer_sequence.
template <ABIType... Val>
class ABITypeSequence {};
template <typename... Args>
using ArgsABITypes_t = ABITypeSequence<TypeToABIType<Args>()...>;
// Generate an std::integer_sequence which corresponds to a buffer containing
// values which are spread at the location where each arguments type would be
// stored in a buffer.
template <typename Buffer, typename Values, typename... Args>
struct ArgsBuffer;
template <uint8_t... Buffer, typename Arg, typename... Args, uint64_t Val,
uint64_t... Values>
struct ArgsBuffer<std::integer_sequence<uint8_t, Buffer...>,
std::integer_sequence<uint64_t, Val, Values...>, Arg,
Args...> {
using type = typename ArgsBuffer<
Concat_t<std::integer_sequence<uint8_t, Buffer...>,
Concat_t<PadSeq_t<ActualAlignOf<Arg>(), sizeof...(Buffer)>,
Concat_t<FillSeq_t<ActualSizeOf<Arg>(), Val>,
CstSeq_t<BackPadBytes<Arg>(), 0x55>>>>,
std::integer_sequence<uint64_t, Values...>, Args...>::type;
};
template <typename Buffer>
struct ArgsBuffer<Buffer, std::integer_sequence<uint64_t>> {
using type = Buffer;
};
template <typename Values, typename... Args>
using ArgsBuffer_t =
typename ArgsBuffer<std::integer_sequence<uint8_t>, Values, Args...>::type;
// NOTE: The representation of the boolean might be surprising in this test
// case, see AtLeastSize function for an explanation.
#ifdef JS_64BIT
static_assert(sizeof(uintptr_t) == 8);
static_assert(
std::is_same_v<
ArgsBuffer_t<std::integer_sequence<uint64_t, 42, 51>, uint64_t, bool>,
std::integer_sequence<uint8_t, 42, 0, 0, 0, 0, 0, 0, 0, 51, 0x55, 0x55,
0x55, 0x55, 0x55, 0x55, 0x55>>);
static_assert(
std::is_same_v<
ArgsBuffer_t<std::integer_sequence<uint64_t, 0xffffffff, 0xffffffff>,
uint8_t, uint16_t>,
std::integer_sequence<uint8_t, 0xff, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55,
0x55, 0xff, 0xff, 0x55, 0x55, 0x55, 0x55, 0x55,
0x55>>);
#else
static_assert(sizeof(uintptr_t) == 4);
static_assert(
std::is_same_v<
ArgsBuffer_t<std::integer_sequence<uint64_t, 42, 51>, uint64_t, bool>,
std::integer_sequence<uint8_t, 42, 0, 0, 0, 0, 0, 0, 0, 51, 0x55, 0x55,
0x55>>);
static_assert(
std::is_same_v<
ArgsBuffer_t<std::integer_sequence<uint64_t, 0xffffffff, 0xffffffff>,
uint8_t, uint16_t>,
std::integer_sequence<uint8_t, 0xff, 0x55, 0x55, 0x55, 0xff, 0xff, 0x55,
0x55>>);
#endif
// Test used to check if any of the types given as template parameters are a
// `bool`, which is a corner case where a raw integer might be truncated by the
// C++ compiler.
template <typename... Args>
constexpr bool AnyBool_v = (std::is_same_v<Args, bool> || ...);
// Instantiate an std::integer_sequence as a buffer which is readable and
// addressable at runtime, for reading argument values from the generated code.
template <typename Seq>
struct InstanceSeq;
template <typename Int, Int... Values>
struct InstanceSeq<std::integer_sequence<Int, Values...>> {
static constexpr Int table[sizeof...(Values)] = {Values...};
static constexpr size_t size = sizeof...(Values);
};
// Instantiate a buffer for testing the position of arguments when calling a
// function.
template <typename... Args>
using TestArgsPositions =
InstanceSeq<ArgsBuffer_t<ArgsIndexes_t<Args...>, Args...>>;
// Instantiate a buffer for testing the position of arguments, one bit at a
// time, when calling a function.
template <size_t Bit, typename... Args>
using TestArgsBitOfPositions =
InstanceSeq<ArgsBuffer_t<ArgsBitOfIndexes_t<Bit, Args...>, Args...>>;
// Instantiate a buffer to check that the size of each argument is interpreted
// correctly when calling a function.
template <typename... Args>
using TestArgsSizes = InstanceSeq<ArgsBuffer_t<ArgsSizes_t<Args...>, Args...>>;
// Instantiate a buffer to check that all bits of each argument goes through.
template <typename... Args>
using TestArgsFillBits =
InstanceSeq<ArgsBuffer_t<ArgsFillBits_t<Args...>, Args...>>;
// ConvertToInt returns the raw value of any argument as an integer value which
// can be compared with the expected values.
template <typename Type>
IntTypeOf_t<Type> ConvertToInt(Type v) {
// Simplify working with types by casting the address of the value to the
// equivalent `const void*`.
auto address = reinterpret_cast<const void*>(&v);
// Convert the `void*` to an integer pointer of the same size as the input
// type, and return the raw value stored in the integer interpretation.
static_assert(ActualSizeOf<Type>() == ActualSizeOf<IntTypeOf_t<Type>>());
if constexpr (std::is_reference_v<Type>) {
return reinterpret_cast<const IntTypeOf_t<Type>>(address);
} else {
return *reinterpret_cast<const IntTypeOf_t<Type>*>(address);
}
}
// Attributes used to disable some parts of Undefined Behavior sanitizer. This
// is needed to keep the signature identical to what is used in production,
// instead of working around these limitations.
//
// * no_sanitize("enum"): Enumerated values given as arguments are checked to
// see if the value given as argument matches any of the enumerated values.
// The patterns used to check whether the values are correctly transmitted
// from the JIT to C++ might go beyond the set of enumerated values, and
// break this sanitizer check.
#if defined(__clang__) && defined(__has_attribute) && \
__has_attribute(no_sanitize)
# define NO_ARGS_CHECKS __attribute__((no_sanitize("enum")))
#else
# define NO_ARGS_CHECKS
#endif
// Check if the raw values of arguments are equal to the numbers given in the
// std::integer_sequence given as the first argument.
template <typename... Args, typename Int, Int... Val>
NO_ARGS_CHECKS bool CheckArgsEqual(JSAPIRuntimeTest* instance, int lineno,
std::integer_sequence<Int, Val...>,
Args... args) {
return (instance->checkEqual(ConvertToInt<Args>(args), IntTypeOf_t<Args>(Val),
"ConvertToInt<Args>(args)",
"IntTypeOf_t<Args>(Val)", __FILE__, lineno) &&
...);
}
// Generate code to register the value of each argument of the called function.
// Each argument's content is read from a buffer whose address is stored in the
// `base` register. The offsets of arguments are given as a third argument
// which is expected to be generated by `ArgsOffsets`. The ABIType types of
// arguments are given as the fourth argument and are expected to be generated
// by `ArgsABIType`.
template <uint64_t... Off, ABIType... Type>
static void passABIArgs(MacroAssembler& masm, Register base,
std::integer_sequence<uint64_t, Off...>,
ABITypeSequence<Type...>) {
(masm.passABIArg(MoveOperand(base, size_t(Off)), Type), ...);
}
// For each function type given as a parameter, create a few functions with the
// given type, to be called by the JIT code produced by `generateCalls`. These
// functions report the result through the instance registered with the
// `set_instance` function, as we cannot add extra arguments to these functions.
template <typename Type>
struct DefineCheckArgs;
template <typename Res, typename... Args>
struct DefineCheckArgs<Res (*)(Args...)> {
void set_instance(JSAPIRuntimeTest* instance, bool* reportTo) {
MOZ_ASSERT((!instance_) != (!instance));
instance_ = instance;
MOZ_ASSERT((!reportTo_) != (!reportTo));
reportTo_ = reportTo;
}
static void report(bool value) { *reportTo_ = *reportTo_ && value; }
// Check that arguments are interpreted in the same order at compile time and
// at runtime.
static NO_ARGS_CHECKS Res CheckArgsPositions(Args... args) {
AutoUnsafeCallWithABI unsafe;
using Indexes = std::index_sequence_for<Args...>;
report(CheckArgsEqual<Args...>(instance_, __LINE__, Indexes(),
std::forward<Args>(args)...));
return Res();
}
// This is the same test as above, but some compilers might clean the boolean
// values using `& 1` operations, which corrupt the operand index, thus to
// properly check for the position of boolean operands, we have to check the
// position of the boolean operand using a single bit at a time.
static NO_ARGS_CHECKS Res CheckArgsBitOfPositions0(Args... args) {
AutoUnsafeCallWithABI unsafe;
using Indexes = ArgsBitOfIndexes_t<0, Args...>;
report(CheckArgsEqual<Args...>(instance_, __LINE__, Indexes(),
std::forward<Args>(args)...));
return Res();
}
static NO_ARGS_CHECKS Res CheckArgsBitOfPositions1(Args... args) {
AutoUnsafeCallWithABI unsafe;
using Indexes = ArgsBitOfIndexes_t<1, Args...>;
report(CheckArgsEqual<Args...>(instance_, __LINE__, Indexes(),
std::forward<Args>(args)...));
return Res();
}
static NO_ARGS_CHECKS Res CheckArgsBitOfPositions2(Args... args) {
AutoUnsafeCallWithABI unsafe;
using Indexes = ArgsBitOfIndexes_t<2, Args...>;
report(CheckArgsEqual<Args...>(instance_, __LINE__, Indexes(),
std::forward<Args>(args)...));
return Res();
}
static NO_ARGS_CHECKS Res CheckArgsBitOfPositions3(Args... args) {
AutoUnsafeCallWithABI unsafe;
using Indexes = ArgsBitOfIndexes_t<3, Args...>;
report(CheckArgsEqual<Args...>(instance_, __LINE__, Indexes(),
std::forward<Args>(args)...));
return Res();
}
// Check that the compile time and run time sizes of each argument are the
// same.
static NO_ARGS_CHECKS Res CheckArgsSizes(Args... args) {
AutoUnsafeCallWithABI unsafe;
using Sizes = ArgsSizes_t<Args...>;
report(CheckArgsEqual<Args...>(instance_, __LINE__, Sizes(),
std::forward<Args>(args)...));
return Res();
}
// Check that the compile time and run time all bits of each argument are
// correctly passed through.
static NO_ARGS_CHECKS Res CheckArgsFillBits(Args... args) {
AutoUnsafeCallWithABI unsafe;
using FillBits = ArgsFillBits_t<Args...>;
report(CheckArgsEqual<Args...>(instance_, __LINE__, FillBits(),
std::forward<Args>(args)...));
return Res();
}
using FunType = Res (*)(Args...);
struct Test {
const uint8_t* buffer;
const size_t size;
const FunType fun;
};
// Generate JIT code for calling the above test functions where each argument
// is given a different raw value that can be compared by each called
// function.
void generateCalls(MacroAssembler& masm, Register base, Register setup) {
using ArgsPositions = TestArgsPositions<Args...>;
using ArgsBitOfPositions0 = TestArgsBitOfPositions<0, Args...>;
using ArgsBitOfPositions1 = TestArgsBitOfPositions<1, Args...>;
using ArgsBitOfPositions2 = TestArgsBitOfPositions<2, Args...>;
using ArgsBitOfPositions3 = TestArgsBitOfPositions<3, Args...>;
using ArgsSizes = TestArgsSizes<Args...>;
using ArgsFillBits = TestArgsFillBits<Args...>;
static const Test testsWithoutBoolArgs[3] = {
{ArgsPositions::table, ArgsPositions::size, CheckArgsPositions},
{ArgsSizes::table, ArgsSizes::size, CheckArgsSizes},
{ArgsFillBits::table, ArgsFillBits::size, CheckArgsFillBits},
};
static const Test testsWithBoolArgs[6] = {
{ArgsBitOfPositions0::table, ArgsBitOfPositions0::size,
CheckArgsBitOfPositions0},
{ArgsBitOfPositions1::table, ArgsBitOfPositions1::size,
CheckArgsBitOfPositions1},
{ArgsBitOfPositions2::table, ArgsBitOfPositions2::size,
CheckArgsBitOfPositions2},
{ArgsBitOfPositions3::table, ArgsBitOfPositions3::size,
CheckArgsBitOfPositions3},
{ArgsSizes::table, ArgsSizes::size, CheckArgsSizes},
{ArgsFillBits::table, ArgsFillBits::size, CheckArgsFillBits},
};
const Test* tests = testsWithoutBoolArgs;
size_t numTests = std::size(testsWithoutBoolArgs);
if (AnyBool_v<Args...>) {
tests = testsWithBoolArgs;
numTests = std::size(testsWithBoolArgs);
}
for (size_t i = 0; i < numTests; i++) {
const Test& test = tests[i];
masm.movePtr(ImmPtr(test.buffer), base);
masm.setupUnalignedABICall(setup);
using Offsets = ArgsOffsets_t<0, Args...>;
using ABITypes = ArgsABITypes_t<Args...>;
passABIArgs(masm, base, Offsets(), ABITypes());
masm.callWithABI(DynFn{JS_FUNC_TO_DATA_PTR(void*, test.fun)},
TypeToABIType<Res>(),
CheckUnsafeCallWithABI::DontCheckOther);
}
}
private:
// As we are checking specific function signature, we cannot add extra
// parameters, thus we rely on static variables to pass the value of the
// instance that we are testing.
static JSAPIRuntimeTest* instance_;
static bool* reportTo_;
};
template <typename Res, typename... Args>
JSAPIRuntimeTest* DefineCheckArgs<Res (*)(Args...)>::instance_ = nullptr;
template <typename Res, typename... Args>
bool* DefineCheckArgs<Res (*)(Args...)>::reportTo_ = nullptr;
// This is a child class of JSAPIRuntimeTest, which is used behind the scenes to
// register test cases in jsapi-tests. Each instance of it creates a new test
// case. This class is specialized with the type of the function to check, and
// initialized with the name of the function with the given signature.
//
// When executed, it generates the JIT code to call functions with the same
// signature and checks that the JIT interpretation of arguments location
// matches the C++ interpretation. If it differs, the test case will fail.
template <typename Sig>
class JitABICall final : public JSAPIRuntimeTest, public DefineCheckArgs<Sig> {
public:
explicit JitABICall(const char* name) : name_(name) { reuseGlobal = true; }
virtual const char* name() override { return name_; }
virtual bool run(JS::HandleObject) override {
bool result = true;
this->set_instance(this, &result);
TempAllocator temp(&cx->tempLifoAlloc());
JitContext jcx(cx);
StackMacroAssembler masm(cx, temp);
AutoCreatedBy acb(masm, __func__);
PrepareJit(masm);
AllocatableGeneralRegisterSet regs(GeneralRegisterSet::All());
// Initialize the base register the same way this is done while reading
// arguments in generateVMWrapper, in order to avoid MOZ_RELEASE_ASSERT in
// the MoveResolver.
#if defined(JS_CODEGEN_X86)
Register base = regs.takeAny();
#elif defined(JS_CODEGEN_X64)
Register base = r10;
regs.take(base);
#elif defined(JS_CODEGEN_ARM)
Register base = r5;
regs.take(base);
#elif defined(JS_CODEGEN_ARM64)
Register base = r8;
regs.take(base);
#elif defined(JS_CODEGEN_MIPS32)
Register base = t1;
regs.take(base);
#elif defined(JS_CODEGEN_MIPS64)
Register base = t1;
regs.take(base);
#elif defined(JS_CODEGEN_LOONG64)
Register base = t0;
regs.take(base);
#elif defined(JS_CODEGEN_RISCV64)
Register base = t0;
regs.take(base);
#else
# error "Unknown architecture!"
#endif
Register setup = regs.takeAny();
this->generateCalls(masm, base, setup);
if (!ExecuteJit(cx, masm)) {
return false;
}
this->set_instance(nullptr, nullptr);
return result;
};
private:
const char* name_;
};
// GCC warns when the signature does not have matching attributes (for example
// [[nodiscard]]). Squelch this warning to avoid a GCC-only footgun.
#if MOZ_IS_GCC
# pragma GCC diagnostic push
# pragma GCC diagnostic ignored "-Wignored-attributes"
#endif
// For each VMFunction and ABIFunction, create an instance of a JitABICall
// class to register a jsapi-tests test case.
#define TEST_INSTANCE(Name, Sig) \
static JitABICall<Sig> MOZ_CONCAT(MOZ_CONCAT(cls_jitabicall, __COUNTER__), \
_instance)("JIT ABI for " Name);
#define TEST_INSTANCE_ABIFUN_TO_ALLFUN(...) \
APPLY(TEST_INSTANCE, ABIFUN_TO_ALLFUN(__VA_ARGS__))
#define TEST_INSTANCE_ABIFUN_AND_SIG_TO_ALLFUN(...) \
APPLY(TEST_INSTANCE, ABIFUN_AND_SIG_TO_ALLFUN(__VA_ARGS__))
#define TEST_INSTANCE_ABISIG_TO_ALLFUN(...) \
APPLY(TEST_INSTANCE, ABISIG_TO_ALLFUN(__VA_ARGS__))
#define TEST_INSTANCE_VMFUN_TO_ALLFUN(...) \
APPLY(TEST_INSTANCE, VMFUN_TO_ALLFUN(__VA_ARGS__))
ALL_FUNCTIONS(TEST_INSTANCE)
#if MOZ_IS_GCC
# pragma GCC diagnostic pop
#endif