Source code

Revision control

Copy as Markdown

Other Tools

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#ifndef ProfilerCounts_h
#define ProfilerCounts_h
#ifndef MOZ_GECKO_PROFILER
# define PROFILER_DEFINE_COUNT_TOTAL(label, category, description)
# define PROFILER_DEFINE_COUNT(label, category, description)
# define PROFILER_DEFINE_STATIC_COUNT_TOTAL(label, category, description)
# define AUTO_PROFILER_TOTAL(label, count)
# define AUTO_PROFILER_COUNT(label)
# define AUTO_PROFILER_STATIC_COUNT(label, count)
#else
# include "mozilla/Assertions.h"
# include "mozilla/Atomics.h"
# include "mozilla/DataMutex.h"
class BaseProfilerCount;
void profiler_add_sampled_counter(BaseProfilerCount* aCounter);
void profiler_remove_sampled_counter(BaseProfilerCount* aCounter);
typedef mozilla::Atomic<int64_t, mozilla::MemoryOrdering::Relaxed>
ProfilerAtomicSigned;
typedef mozilla::Atomic<uint64_t, mozilla::MemoryOrdering::Relaxed>
ProfilerAtomicUnsigned;
// Counter support
// There are two types of counters:
// 1) a simple counter which can be added to or subtracted from. This could
// track the number of objects of a type, the number of calls to something
// (reflow, JIT, etc).
// 2) a combined counter which has the above, plus a number-of-calls counter
// that is incremented by 1 for each call to modify the count. This provides
// an optional source for a 'heatmap' of access. This can be used (for
// example) to track the amount of memory allocated, and provide a heatmap of
// memory operations (allocs/frees).
//
// Counters are sampled by the profiler once per sample-period. At this time,
// all counters are global to the process. In the future, there might be more
// versions with per-thread or other discriminators.
//
// Typical usage:
// There are two ways to use counters: With heap-created counter objects,
// or using macros. Note: the macros use statics, and will be slightly
// faster/smaller, and you need to care about creating them before using
// them. They're similar to the use-pattern for the other AUTO_PROFILER*
// macros, but they do need the PROFILER_DEFINE* to be use to instantiate
// the statics.
//
// PROFILER_DEFINE_COUNT(mything, "JIT", "Some JIT byte count")
// ...
// void foo() { ... AUTO_PROFILER_COUNT(mything, number_of_bytes_used); ... }
//
// or (to also get a heatmap)
//
// PROFILER_DEFINE_COUNT_TOTAL(mything, "JIT", "Some JIT byte count")
// ...
// void foo() {
// ...
// AUTO_PROFILER_COUNT_TOTAL(mything, number_of_bytes_generated);
// ...
// }
//
// To use without statics/macros:
//
// UniquePtr<ProfilerCounter> myCounter;
// ...
// myCounter =
// MakeUnique<ProfilerCounter>("mything", "JIT", "Some JIT byte count"));
// ...
// void foo() { ... myCounter->Add(number_of_bytes_generated0; ... }
class BaseProfilerCount {
public:
BaseProfilerCount(const char* aLabel, ProfilerAtomicSigned* aCounter,
ProfilerAtomicUnsigned* aNumber, const char* aCategory,
const char* aDescription)
: mLabel(aLabel),
mCategory(aCategory),
mDescription(aDescription),
mCounter(aCounter),
mNumber(aNumber) {
# define COUNTER_CANARY 0xDEADBEEF
# ifdef DEBUG
mCanary = COUNTER_CANARY;
mPrevNumber = 0;
# endif
// Can't call profiler_* here since this may be non-xul-library
}
virtual ~BaseProfilerCount() {
# ifdef DEBUG
mCanary = 0;
# endif
}
struct CountSample {
int64_t count;
uint64_t number;
// This field indicates if the sample has already been consummed by a call
// to the Sample() method. This allows the profiler to discard duplicate
// samples if the counter sampling rate is lower than the profiler sampling
// rate. This can happen for example with some power meters that sample up
// to every 10ms.
// It should always be true when calling Sample() for the first time.
bool isSampleNew;
};
virtual CountSample Sample() {
MOZ_ASSERT(mCanary == COUNTER_CANARY);
CountSample result;
result.count = *mCounter;
result.number = mNumber ? *mNumber : 0;
# ifdef DEBUG
MOZ_ASSERT(result.number >= mPrevNumber);
mPrevNumber = result.number;
# endif
result.isSampleNew = true;
return result;
}
void Clear() {
*mCounter = 0;
// We don't reset *mNumber or mPrevNumber. We encode numbers as
// positive deltas, and currently we only care about the deltas (for
// e.g. heatmaps). If we ever need to clear mNumber as well, we can an
// alternative method (Reset()) to do so.
}
// We don't define ++ and Add() here, since the static defines directly
// increment the atomic counters, and the subclasses implement ++ and
// Add() directly.
// These typically are static strings (for example if you use the macros
// below)
const char* mLabel;
const char* mCategory;
const char* mDescription;
// We're ok with these being un-ordered in race conditions. These are
// pointers because we want to be able to use statics and increment them
// directly. Otherwise we could just have them inline, and not need the
// constructor args.
// These can be static globals (using the macros below), though they
// don't have to be - their lifetime must be longer than the use of them
// by the profiler (see profiler_add/remove_sampled_counter()). If you're
// using a lot of these, they probably should be allocated at runtime (see
// class ProfilerCountOnly below).
ProfilerAtomicSigned* mCounter;
ProfilerAtomicUnsigned* mNumber; // may be null
# ifdef DEBUG
uint32_t mCanary;
uint64_t mPrevNumber; // value of number from the last Sample()
# endif
};
// Designed to be allocated dynamically, and simply incremented with obj++
// or obj->Add(n)
class ProfilerCounter final : public BaseProfilerCount {
public:
ProfilerCounter(const char* aLabel, const char* aCategory,
const char* aDescription)
: BaseProfilerCount(aLabel, &mCounter, nullptr, aCategory, aDescription) {
// Assume we're in libxul
profiler_add_sampled_counter(this);
}
virtual ~ProfilerCounter() { profiler_remove_sampled_counter(this); }
BaseProfilerCount& operator++() {
Add(1);
return *this;
}
void Add(int64_t aNumber) { mCounter += aNumber; }
ProfilerAtomicSigned mCounter;
};
// Also keeps a heatmap (number of calls to ++/Add())
class ProfilerCounterTotal final : public BaseProfilerCount {
public:
ProfilerCounterTotal(const char* aLabel, const char* aCategory,
const char* aDescription)
: BaseProfilerCount(aLabel, &mCounter, &mNumber, aCategory, aDescription),
mRegistered(false, "ProfilerCounterTotal::mRegistered") {
// Assume we're in libxul
Register();
}
virtual ~ProfilerCounterTotal() { Unregister(); }
void Register() {
auto registered = mRegistered.Lock();
if (*registered) {
return;
}
*registered = true;
profiler_add_sampled_counter(this);
}
void Unregister() {
auto registered = mRegistered.Lock();
if (!*registered) {
return;
}
*registered = false;
profiler_remove_sampled_counter(this);
}
BaseProfilerCount& operator++() {
Add(1);
return *this;
}
void Add(int64_t aNumber) {
mCounter += aNumber;
mNumber++;
}
ProfilerAtomicSigned mCounter;
ProfilerAtomicUnsigned mNumber;
// Using OffTheBooksMutex here because we intentionally leak memory counters
// if they are initialized.
mozilla::DataMutexBase<bool, mozilla::OffTheBooksMutex> mRegistered;
};
// Defines a counter that is sampled on each profiler tick, with a running
// count (signed), and number-of-instances. Note that because these are two
// independent Atomics, there is a possiblity that count will not include
// the last call, but number of uses will. I think this is not worth
// worrying about
# define PROFILER_DEFINE_COUNT_TOTAL(label, category, description) \
ProfilerAtomicSigned profiler_count_##label(0); \
ProfilerAtomicUnsigned profiler_number_##label(0); \
const char profiler_category_##label[] = category; \
const char profiler_description_##label[] = description; \
mozilla::UniquePtr<BaseProfilerCount> AutoCount_##label;
// This counts, but doesn't keep track of the number of calls to
// AUTO_PROFILER_COUNT()
# define PROFILER_DEFINE_COUNT(label, category, description) \
ProfilerAtomicSigned profiler_count_##label(0); \
const char profiler_category_##label[] = category; \
const char profiler_description_##label[] = description; \
mozilla::UniquePtr<BaseProfilerCount> AutoCount_##label;
// This will create a static initializer if used, but avoids a possible
// allocation.
# define PROFILER_DEFINE_STATIC_COUNT_TOTAL(label, category, description) \
ProfilerAtomicSigned profiler_count_##label(0); \
ProfilerAtomicUnsigned profiler_number_##label(0); \
BaseProfilerCount AutoCount_##label(#label, &profiler_count_##label, \
&profiler_number_##label, category, \
description);
// If we didn't care about static initializers, we could avoid the need for
// a ptr to the BaseProfilerCount object.
// XXX It would be better to do this without the if() and without the
// theoretical race to set the UniquePtr (i.e. possible leak).
# define AUTO_PROFILER_COUNT_TOTAL(label, count) \
do { \
profiler_number_##label++; /* do this first*/ \
profiler_count_##label += count; \
if (!AutoCount_##label) { \
/* Ignore that we could call this twice in theory, and that we leak \
* them \
*/ \
AutoCount_##label.reset(new BaseProfilerCount( \
#label, &profiler_count_##label, &profiler_number_##label, \
profiler_category_##label, profiler_description_##label)); \
profiler_add_sampled_counter(AutoCount_##label.get()); \
} \
} while (0)
# define AUTO_PROFILER_COUNT(label, count) \
do { \
profiler_count_##label += count; /* do this first*/ \
if (!AutoCount_##label) { \
/* Ignore that we could call this twice in theory, and that we leak \
* them \
*/ \
AutoCount_##label.reset(new BaseProfilerCount( \
#label, nullptr, &profiler_number_##label, \
profiler_category_##label, profiler_description_##label)); \
profiler_add_sampled_counter(AutoCount_##label.get()); \
} \
} while (0)
# define AUTO_PROFILER_STATIC_COUNT(label, count) \
do { \
profiler_number_##label++; /* do this first*/ \
profiler_count_##label += count; \
} while (0)
// if we need to force the allocation
# define AUTO_PROFILER_FORCE_ALLOCATION(label) \
do { \
if (!AutoCount_##label) { \
/* Ignore that we could call this twice in theory, and that we leak \
* them \
*/ \
AutoCount_##label.reset(new BaseProfilerCount( \
#label, &profiler_count_##label, &profiler_number_##label, \
profiler_category_##label, profiler_description_##label)); \
} \
} while (0)
#endif // !MOZ_GECKO_PROFILER
#endif // ProfilerCounts_h