Source code
Revision control
Copy as Markdown
Other Tools
/*!
An NFA backed Pike VM for executing regex searches with capturing groups.
This module provides a [`PikeVM`] that works by simulating an NFA and
resolving all spans of capturing groups that participate in a match.
*/
#[cfg(feature = "internal-instrument-pikevm")]
use core::cell::RefCell;
use alloc::{vec, vec::Vec};
use crate::{
nfa::thompson::{self, BuildError, State, NFA},
util::{
captures::Captures,
empty, iter,
prefilter::Prefilter,
primitives::{NonMaxUsize, PatternID, SmallIndex, StateID},
search::{
Anchored, HalfMatch, Input, Match, MatchKind, PatternSet, Span,
},
sparse_set::SparseSet,
},
};
/// A simple macro for conditionally executing instrumentation logic when
/// the 'trace' log level is enabled. This is a compile-time no-op when the
/// 'internal-instrument-pikevm' feature isn't enabled. The intent here is that
/// this makes it easier to avoid doing extra work when instrumentation isn't
/// enabled.
///
/// This macro accepts a closure of type `|&mut Counters|`. The closure can
/// then increment counters (or whatever) in accordance with what one wants
/// to track.
macro_rules! instrument {
($fun:expr) => {
#[cfg(feature = "internal-instrument-pikevm")]
{
let fun: &mut dyn FnMut(&mut Counters) = &mut $fun;
COUNTERS.with(|c: &RefCell<Counters>| fun(&mut *c.borrow_mut()));
}
};
}
#[cfg(feature = "internal-instrument-pikevm")]
std::thread_local! {
/// Effectively global state used to keep track of instrumentation
/// counters. The "proper" way to do this is to thread it through the
/// PikeVM, but it makes the code quite icky. Since this is just a
/// debugging feature, we're content to relegate it to thread local
/// state. When instrumentation is enabled, the counters are reset at the
/// beginning of every search and printed (with the 'trace' log level) at
/// the end of every search.
static COUNTERS: RefCell<Counters> = RefCell::new(Counters::empty());
}
/// The configuration used for building a [`PikeVM`].
///
/// A PikeVM configuration is a simple data object that is typically used with
/// [`Builder::configure`]. It can be cheaply cloned.
///
/// A default configuration can be created either with `Config::new`, or
/// perhaps more conveniently, with [`PikeVM::config`].
#[derive(Clone, Debug, Default)]
pub struct Config {
match_kind: Option<MatchKind>,
pre: Option<Option<Prefilter>>,
}
impl Config {
/// Return a new default PikeVM configuration.
pub fn new() -> Config {
Config::default()
}
/// Set the desired match semantics.
///
/// The default is [`MatchKind::LeftmostFirst`], which corresponds to the
/// match semantics of Perl-like regex engines. That is, when multiple
/// patterns would match at the same leftmost position, the pattern that
/// appears first in the concrete syntax is chosen.
///
/// Currently, the only other kind of match semantics supported is
/// [`MatchKind::All`]. This corresponds to "classical DFA" construction
/// where all possible matches are visited in the NFA by the `PikeVM`.
///
/// Typically, `All` is used when one wants to execute an overlapping
/// search and `LeftmostFirst` otherwise. In particular, it rarely makes
/// sense to use `All` with the various "leftmost" find routines, since the
/// leftmost routines depend on the `LeftmostFirst` automata construction
/// strategy. Specifically, `LeftmostFirst` results in the `PikeVM`
/// simulating dead states as a way to terminate the search and report a
/// match. `LeftmostFirst` also supports non-greedy matches using this
/// strategy where as `All` does not.
pub fn match_kind(mut self, kind: MatchKind) -> Config {
self.match_kind = Some(kind);
self
}
/// Set a prefilter to be used whenever a start state is entered.
///
/// A [`Prefilter`] in this context is meant to accelerate searches by
/// looking for literal prefixes that every match for the corresponding
/// pattern (or patterns) must start with. Once a prefilter produces a
/// match, the underlying search routine continues on to try and confirm
/// the match.
///
/// Be warned that setting a prefilter does not guarantee that the search
/// will be faster. While it's usually a good bet, if the prefilter
/// produces a lot of false positive candidates (i.e., positions matched
/// by the prefilter but not by the regex), then the overall result can
/// be slower than if you had just executed the regex engine without any
/// prefilters.
///
/// By default no prefilter is set.
///
/// # Example
///
/// ```
/// use regex_automata::{
/// nfa::thompson::pikevm::PikeVM,
/// util::prefilter::Prefilter,
/// Input, Match, MatchKind,
/// };
///
/// let pre = Prefilter::new(MatchKind::LeftmostFirst, &["foo", "bar"]);
/// let re = PikeVM::builder()
/// .configure(PikeVM::config().prefilter(pre))
/// .build(r"(foo|bar)[a-z]+")?;
/// let mut cache = re.create_cache();
/// let input = Input::new("foo1 barfox bar");
/// assert_eq!(Some(Match::must(0, 5..11)), re.find(&mut cache, input));
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
///
/// Be warned though that an incorrect prefilter can lead to incorrect
/// results!
///
/// ```
/// use regex_automata::{
/// nfa::thompson::pikevm::PikeVM,
/// util::prefilter::Prefilter,
/// Input, HalfMatch, MatchKind,
/// };
///
/// let pre = Prefilter::new(MatchKind::LeftmostFirst, &["foo", "car"]);
/// let re = PikeVM::builder()
/// .configure(PikeVM::config().prefilter(pre))
/// .build(r"(foo|bar)[a-z]+")?;
/// let mut cache = re.create_cache();
/// let input = Input::new("foo1 barfox bar");
/// // No match reported even though there clearly is one!
/// assert_eq!(None, re.find(&mut cache, input));
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
pub fn prefilter(mut self, pre: Option<Prefilter>) -> Config {
self.pre = Some(pre);
self
}
/// Returns the match semantics set in this configuration.
pub fn get_match_kind(&self) -> MatchKind {
self.match_kind.unwrap_or(MatchKind::LeftmostFirst)
}
/// Returns the prefilter set in this configuration, if one at all.
pub fn get_prefilter(&self) -> Option<&Prefilter> {
self.pre.as_ref().unwrap_or(&None).as_ref()
}
/// Overwrite the default configuration such that the options in `o` are
/// always used. If an option in `o` is not set, then the corresponding
/// option in `self` is used. If it's not set in `self` either, then it
/// remains not set.
pub(crate) fn overwrite(&self, o: Config) -> Config {
Config {
match_kind: o.match_kind.or(self.match_kind),
pre: o.pre.or_else(|| self.pre.clone()),
}
}
}
/// A builder for a `PikeVM`.
///
/// This builder permits configuring options for the syntax of a pattern,
/// the NFA construction and the `PikeVM` construction. This builder is
/// different from a general purpose regex builder in that it permits fine
/// grain configuration of the construction process. The trade off for this is
/// complexity, and the possibility of setting a configuration that might not
/// make sense. For example, there are two different UTF-8 modes:
///
/// * [`util::syntax::Config::utf8`](crate::util::syntax::Config::utf8)
/// controls whether the pattern itself can contain sub-expressions that match
/// invalid UTF-8.
/// * [`thompson::Config::utf8`] controls whether empty matches that split a
/// Unicode codepoint are reported or not.
///
/// Generally speaking, callers will want to either enable all of these or
/// disable all of these.
///
/// # Example
///
/// This example shows how to disable UTF-8 mode in the syntax and the regex
/// itself. This is generally what you want for matching on arbitrary bytes.
///
/// ```
/// use regex_automata::{
/// nfa::thompson::{self, pikevm::PikeVM},
/// util::syntax,
/// Match,
/// };
///
/// let re = PikeVM::builder()
/// .syntax(syntax::Config::new().utf8(false))
/// .thompson(thompson::Config::new().utf8(false))
/// .build(r"foo(?-u:[^b])ar.*")?;
/// let mut cache = re.create_cache();
///
/// let haystack = b"\xFEfoo\xFFarzz\xE2\x98\xFF\n";
/// let expected = Some(Match::must(0, 1..9));
/// let got = re.find_iter(&mut cache, haystack).next();
/// assert_eq!(expected, got);
/// // Notice that `(?-u:[^b])` matches invalid UTF-8,
/// // but the subsequent `.*` does not! Disabling UTF-8
/// // on the syntax permits this.
/// //
/// // N.B. This example does not show the impact of
/// // disabling UTF-8 mode on a PikeVM Config, since that
/// // only impacts regexes that can produce matches of
/// // length 0.
/// assert_eq!(b"foo\xFFarzz", &haystack[got.unwrap().range()]);
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[derive(Clone, Debug)]
pub struct Builder {
config: Config,
#[cfg(feature = "syntax")]
thompson: thompson::Compiler,
}
impl Builder {
/// Create a new PikeVM builder with its default configuration.
pub fn new() -> Builder {
Builder {
config: Config::default(),
#[cfg(feature = "syntax")]
thompson: thompson::Compiler::new(),
}
}
/// Build a `PikeVM` from the given pattern.
///
/// If there was a problem parsing or compiling the pattern, then an error
/// is returned.
#[cfg(feature = "syntax")]
pub fn build(&self, pattern: &str) -> Result<PikeVM, BuildError> {
self.build_many(&[pattern])
}
/// Build a `PikeVM` from the given patterns.
#[cfg(feature = "syntax")]
pub fn build_many<P: AsRef<str>>(
&self,
patterns: &[P],
) -> Result<PikeVM, BuildError> {
let nfa = self.thompson.build_many(patterns)?;
self.build_from_nfa(nfa)
}
/// Build a `PikeVM` directly from its NFA.
///
/// Note that when using this method, any configuration that applies to the
/// construction of the NFA itself will of course be ignored, since the NFA
/// given here is already built.
pub fn build_from_nfa(&self, nfa: NFA) -> Result<PikeVM, BuildError> {
nfa.look_set_any().available().map_err(BuildError::word)?;
Ok(PikeVM { config: self.config.clone(), nfa })
}
/// Apply the given `PikeVM` configuration options to this builder.
pub fn configure(&mut self, config: Config) -> &mut Builder {
self.config = self.config.overwrite(config);
self
}
/// Set the syntax configuration for this builder using
/// [`syntax::Config`](crate::util::syntax::Config).
///
/// This permits setting things like case insensitivity, Unicode and multi
/// line mode.
///
/// These settings only apply when constructing a PikeVM directly from a
/// pattern.
#[cfg(feature = "syntax")]
pub fn syntax(
&mut self,
config: crate::util::syntax::Config,
) -> &mut Builder {
self.thompson.syntax(config);
self
}
/// Set the Thompson NFA configuration for this builder using
/// [`nfa::thompson::Config`](crate::nfa::thompson::Config).
///
/// This permits setting things like if additional time should be spent
/// shrinking the size of the NFA.
///
/// These settings only apply when constructing a PikeVM directly from a
/// pattern.
#[cfg(feature = "syntax")]
pub fn thompson(&mut self, config: thompson::Config) -> &mut Builder {
self.thompson.configure(config);
self
}
}
/// A virtual machine for executing regex searches with capturing groups.
///
/// # Infallible APIs
///
/// Unlike most other regex engines in this crate, a `PikeVM` never returns an
/// error at search time. It supports all [`Anchored`] configurations, never
/// quits and works on haystacks of arbitrary length.
///
/// There are two caveats to mention though:
///
/// * If an invalid pattern ID is given to a search via [`Anchored::Pattern`],
/// then the PikeVM will report "no match." This is consistent with all other
/// regex engines in this crate.
/// * When using [`PikeVM::which_overlapping_matches`] with a [`PatternSet`]
/// that has insufficient capacity to store all valid pattern IDs, then if a
/// match occurs for a `PatternID` that cannot be inserted, it is silently
/// dropped as if it did not match.
///
/// # Advice
///
/// The `PikeVM` is generally the most "powerful" regex engine in this crate.
/// "Powerful" in this context means that it can handle any regular expression
/// that is parseable by `regex-syntax` and any size haystack. Regretably,
/// the `PikeVM` is also simultaneously often the _slowest_ regex engine in
/// practice. This results in an annoying situation where one generally tries
/// to pick any other regex engine (or perhaps none at all) before being
/// forced to fall back to a `PikeVM`.
///
/// For example, a common strategy for dealing with capturing groups is to
/// actually look for the overall match of the regex using a faster regex
/// engine, like a [lazy DFA](crate::hybrid::regex::Regex). Once the overall
/// match is found, one can then run the `PikeVM` on just the match span to
/// find the spans of the capturing groups. In this way, the faster regex
/// engine does the majority of the work, while the `PikeVM` only lends its
/// power in a more limited role.
///
/// Unfortunately, this isn't always possible because the faster regex engines
/// don't support all of the regex features in `regex-syntax`. This notably
/// includes (and is currently limited to) Unicode word boundaries. So if
/// your pattern has Unicode word boundaries, you typically can't use a
/// DFA-based regex engine at all (unless you [enable heuristic support for
/// it](crate::hybrid::dfa::Config::unicode_word_boundary)). (The [one-pass
/// DFA](crate::dfa::onepass::DFA) can handle Unicode word boundaries for
/// anchored searches only, but in a cruel sort of joke, many Unicode features
/// tend to result in making the regex _not_ one-pass.)
///
/// # Example
///
/// This example shows that the `PikeVM` implements Unicode word boundaries
/// correctly by default.
///
/// ```
/// # if cfg!(miri) { return Ok(()); } // miri takes too long
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Match};
///
/// let re = PikeVM::new(r"\b\w+\b")?;
/// let mut cache = re.create_cache();
///
/// let mut it = re.find_iter(&mut cache, "Шерлок Холмс");
/// assert_eq!(Some(Match::must(0, 0..12)), it.next());
/// assert_eq!(Some(Match::must(0, 13..23)), it.next());
/// assert_eq!(None, it.next());
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[derive(Clone, Debug)]
pub struct PikeVM {
config: Config,
nfa: NFA,
}
impl PikeVM {
/// Parse the given regular expression using the default configuration and
/// return the corresponding `PikeVM`.
///
/// If you want a non-default configuration, then use the [`Builder`] to
/// set your own configuration.
///
/// # Example
///
/// ```
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Match};
///
/// let re = PikeVM::new("foo[0-9]+bar")?;
/// let mut cache = re.create_cache();
/// assert_eq!(
/// Some(Match::must(0, 3..14)),
/// re.find_iter(&mut cache, "zzzfoo12345barzzz").next(),
/// );
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[cfg(feature = "syntax")]
pub fn new(pattern: &str) -> Result<PikeVM, BuildError> {
PikeVM::builder().build(pattern)
}
/// Like `new`, but parses multiple patterns into a single "multi regex."
/// This similarly uses the default regex configuration.
///
/// # Example
///
/// ```
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Match};
///
/// let re = PikeVM::new_many(&["[a-z]+", "[0-9]+"])?;
/// let mut cache = re.create_cache();
///
/// let mut it = re.find_iter(&mut cache, "abc 1 foo 4567 0 quux");
/// assert_eq!(Some(Match::must(0, 0..3)), it.next());
/// assert_eq!(Some(Match::must(1, 4..5)), it.next());
/// assert_eq!(Some(Match::must(0, 6..9)), it.next());
/// assert_eq!(Some(Match::must(1, 10..14)), it.next());
/// assert_eq!(Some(Match::must(1, 15..16)), it.next());
/// assert_eq!(Some(Match::must(0, 17..21)), it.next());
/// assert_eq!(None, it.next());
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[cfg(feature = "syntax")]
pub fn new_many<P: AsRef<str>>(
patterns: &[P],
) -> Result<PikeVM, BuildError> {
PikeVM::builder().build_many(patterns)
}
/// Like `new`, but builds a PikeVM directly from an NFA. This is useful
/// if you already have an NFA, or even if you hand-assembled the NFA.
///
/// # Example
///
/// This shows how to hand assemble a regular expression via its HIR,
/// compile an NFA from it and build a PikeVM from the NFA.
///
/// ```
/// use regex_automata::{nfa::thompson::{NFA, pikevm::PikeVM}, Match};
/// use regex_syntax::hir::{Hir, Class, ClassBytes, ClassBytesRange};
///
/// let hir = Hir::class(Class::Bytes(ClassBytes::new(vec![
/// ClassBytesRange::new(b'0', b'9'),
/// ClassBytesRange::new(b'A', b'Z'),
/// ClassBytesRange::new(b'_', b'_'),
/// ClassBytesRange::new(b'a', b'z'),
/// ])));
///
/// let config = NFA::config().nfa_size_limit(Some(1_000));
/// let nfa = NFA::compiler().configure(config).build_from_hir(&hir)?;
///
/// let re = PikeVM::new_from_nfa(nfa)?;
/// let (mut cache, mut caps) = (re.create_cache(), re.create_captures());
/// let expected = Some(Match::must(0, 3..4));
/// re.captures(&mut cache, "!@#A#@!", &mut caps);
/// assert_eq!(expected, caps.get_match());
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
pub fn new_from_nfa(nfa: NFA) -> Result<PikeVM, BuildError> {
PikeVM::builder().build_from_nfa(nfa)
}
/// Create a new `PikeVM` that matches every input.
///
/// # Example
///
/// ```
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Match};
///
/// let re = PikeVM::always_match()?;
/// let mut cache = re.create_cache();
///
/// let expected = Match::must(0, 0..0);
/// assert_eq!(Some(expected), re.find_iter(&mut cache, "").next());
/// assert_eq!(Some(expected), re.find_iter(&mut cache, "foo").next());
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
pub fn always_match() -> Result<PikeVM, BuildError> {
let nfa = thompson::NFA::always_match();
PikeVM::new_from_nfa(nfa)
}
/// Create a new `PikeVM` that never matches any input.
///
/// # Example
///
/// ```
/// use regex_automata::nfa::thompson::pikevm::PikeVM;
///
/// let re = PikeVM::never_match()?;
/// let mut cache = re.create_cache();
///
/// assert_eq!(None, re.find_iter(&mut cache, "").next());
/// assert_eq!(None, re.find_iter(&mut cache, "foo").next());
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
pub fn never_match() -> Result<PikeVM, BuildError> {
let nfa = thompson::NFA::never_match();
PikeVM::new_from_nfa(nfa)
}
/// Return a default configuration for a `PikeVM`.
///
/// This is a convenience routine to avoid needing to import the `Config`
/// type when customizing the construction of a `PikeVM`.
///
/// # Example
///
/// This example shows how to disable UTF-8 mode. When UTF-8 mode is
/// disabled, zero-width matches that split a codepoint are allowed.
/// Otherwise they are never reported.
///
/// In the code below, notice that `""` is permitted to match positions
/// that split the encoding of a codepoint.
///
/// ```
/// use regex_automata::{nfa::thompson::{self, pikevm::PikeVM}, Match};
///
/// let re = PikeVM::builder()
/// .thompson(thompson::Config::new().utf8(false))
/// .build(r"")?;
/// let mut cache = re.create_cache();
///
/// let haystack = "a☃z";
/// let mut it = re.find_iter(&mut cache, haystack);
/// assert_eq!(Some(Match::must(0, 0..0)), it.next());
/// assert_eq!(Some(Match::must(0, 1..1)), it.next());
/// assert_eq!(Some(Match::must(0, 2..2)), it.next());
/// assert_eq!(Some(Match::must(0, 3..3)), it.next());
/// assert_eq!(Some(Match::must(0, 4..4)), it.next());
/// assert_eq!(Some(Match::must(0, 5..5)), it.next());
/// assert_eq!(None, it.next());
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
pub fn config() -> Config {
Config::new()
}
/// Return a builder for configuring the construction of a `PikeVM`.
///
/// This is a convenience routine to avoid needing to import the
/// [`Builder`] type in common cases.
///
/// # Example
///
/// This example shows how to use the builder to disable UTF-8 mode
/// everywhere.
///
/// ```
/// use regex_automata::{
/// nfa::thompson::{self, pikevm::PikeVM},
/// util::syntax,
/// Match,
/// };
///
/// let re = PikeVM::builder()
/// .syntax(syntax::Config::new().utf8(false))
/// .thompson(thompson::Config::new().utf8(false))
/// .build(r"foo(?-u:[^b])ar.*")?;
/// let (mut cache, mut caps) = (re.create_cache(), re.create_captures());
///
/// let haystack = b"\xFEfoo\xFFarzz\xE2\x98\xFF\n";
/// let expected = Some(Match::must(0, 1..9));
/// re.captures(&mut cache, haystack, &mut caps);
/// assert_eq!(expected, caps.get_match());
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
pub fn builder() -> Builder {
Builder::new()
}
/// Create a new empty set of capturing groups that is guaranteed to be
/// valid for the search APIs on this `PikeVM`.
///
/// A `Captures` value created for a specific `PikeVM` cannot be used with
/// any other `PikeVM`.
///
/// This is a convenience function for [`Captures::all`]. See the
/// [`Captures`] documentation for an explanation of its alternative
/// constructors that permit the `PikeVM` to do less work during a search,
/// and thus might make it faster.
pub fn create_captures(&self) -> Captures {
Captures::all(self.get_nfa().group_info().clone())
}
/// Create a new cache for this `PikeVM`.
///
/// The cache returned should only be used for searches for this
/// `PikeVM`. If you want to reuse the cache for another `PikeVM`, then
/// you must call [`Cache::reset`] with that `PikeVM` (or, equivalently,
/// [`PikeVM::reset_cache`]).
pub fn create_cache(&self) -> Cache {
Cache::new(self)
}
/// Reset the given cache such that it can be used for searching with the
/// this `PikeVM` (and only this `PikeVM`).
///
/// A cache reset permits reusing memory already allocated in this cache
/// with a different `PikeVM`.
///
/// # Example
///
/// This shows how to re-purpose a cache for use with a different `PikeVM`.
///
/// ```
/// # if cfg!(miri) { return Ok(()); } // miri takes too long
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Match};
///
/// let re1 = PikeVM::new(r"\w")?;
/// let re2 = PikeVM::new(r"\W")?;
///
/// let mut cache = re1.create_cache();
/// assert_eq!(
/// Some(Match::must(0, 0..2)),
/// re1.find_iter(&mut cache, "Δ").next(),
/// );
///
/// // Using 'cache' with re2 is not allowed. It may result in panics or
/// // incorrect results. In order to re-purpose the cache, we must reset
/// // it with the PikeVM we'd like to use it with.
/// //
/// // Similarly, after this reset, using the cache with 're1' is also not
/// // allowed.
/// re2.reset_cache(&mut cache);
/// assert_eq!(
/// Some(Match::must(0, 0..3)),
/// re2.find_iter(&mut cache, "☃").next(),
/// );
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
pub fn reset_cache(&self, cache: &mut Cache) {
cache.reset(self);
}
/// Returns the total number of patterns compiled into this `PikeVM`.
///
/// In the case of a `PikeVM` that contains no patterns, this returns `0`.
///
/// # Example
///
/// This example shows the pattern length for a `PikeVM` that never
/// matches:
///
/// ```
/// use regex_automata::nfa::thompson::pikevm::PikeVM;
///
/// let re = PikeVM::never_match()?;
/// assert_eq!(re.pattern_len(), 0);
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
///
/// And another example for a `PikeVM` that matches at every position:
///
/// ```
/// use regex_automata::nfa::thompson::pikevm::PikeVM;
///
/// let re = PikeVM::always_match()?;
/// assert_eq!(re.pattern_len(), 1);
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
///
/// And finally, a `PikeVM` that was constructed from multiple patterns:
///
/// ```
/// use regex_automata::nfa::thompson::pikevm::PikeVM;
///
/// let re = PikeVM::new_many(&["[0-9]+", "[a-z]+", "[A-Z]+"])?;
/// assert_eq!(re.pattern_len(), 3);
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
pub fn pattern_len(&self) -> usize {
self.nfa.pattern_len()
}
/// Return the config for this `PikeVM`.
#[inline]
pub fn get_config(&self) -> &Config {
&self.config
}
/// Returns a reference to the underlying NFA.
#[inline]
pub fn get_nfa(&self) -> &NFA {
&self.nfa
}
}
impl PikeVM {
/// Returns true if and only if this `PikeVM` matches the given haystack.
///
/// This routine may short circuit if it knows that scanning future
/// input will never lead to a different result. In particular, if the
/// underlying NFA enters a match state, then this routine will return
/// `true` immediately without inspecting any future input. (Consider how
/// this might make a difference given the regex `a+` on the haystack
/// `aaaaaaaaaaaaaaa`. This routine can stop after it sees the first `a`,
/// but routines like `find` need to continue searching because `+` is
/// greedy by default.)
///
/// # Example
///
/// This shows basic usage:
///
/// ```
/// use regex_automata::nfa::thompson::pikevm::PikeVM;
///
/// let re = PikeVM::new("foo[0-9]+bar")?;
/// let mut cache = re.create_cache();
///
/// assert!(re.is_match(&mut cache, "foo12345bar"));
/// assert!(!re.is_match(&mut cache, "foobar"));
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
///
/// # Example: consistency with search APIs
///
/// `is_match` is guaranteed to return `true` whenever `find` returns a
/// match. This includes searches that are executed entirely within a
/// codepoint:
///
/// ```
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Input};
///
/// let re = PikeVM::new("a*")?;
/// let mut cache = re.create_cache();
///
/// assert!(!re.is_match(&mut cache, Input::new("☃").span(1..2)));
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
///
/// Notice that when UTF-8 mode is disabled, then the above reports a
/// match because the restriction against zero-width matches that split a
/// codepoint has been lifted:
///
/// ```
/// use regex_automata::{nfa::thompson::{pikevm::PikeVM, NFA}, Input};
///
/// let re = PikeVM::builder()
/// .thompson(NFA::config().utf8(false))
/// .build("a*")?;
/// let mut cache = re.create_cache();
///
/// assert!(re.is_match(&mut cache, Input::new("☃").span(1..2)));
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[inline]
pub fn is_match<'h, I: Into<Input<'h>>>(
&self,
cache: &mut Cache,
input: I,
) -> bool {
let input = input.into().earliest(true);
self.search_slots(cache, &input, &mut []).is_some()
}
/// Executes a leftmost forward search and returns a `Match` if one exists.
///
/// This routine only includes the overall match span. To get access to the
/// individual spans of each capturing group, use [`PikeVM::captures`].
///
/// # Example
///
/// Leftmost first match semantics corresponds to the match with the
/// smallest starting offset, but where the end offset is determined by
/// preferring earlier branches in the original regular expression. For
/// example, `Sam|Samwise` will match `Sam` in `Samwise`, but `Samwise|Sam`
/// will match `Samwise` in `Samwise`.
///
/// Generally speaking, the "leftmost first" match is how most backtracking
/// regular expressions tend to work. This is in contrast to POSIX-style
/// regular expressions that yield "leftmost longest" matches. Namely,
/// both `Sam|Samwise` and `Samwise|Sam` match `Samwise` when using
/// leftmost longest semantics. (This crate does not currently support
/// leftmost longest semantics.)
///
/// ```
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Match};
///
/// let re = PikeVM::new("foo[0-9]+")?;
/// let mut cache = re.create_cache();
/// let expected = Match::must(0, 0..8);
/// assert_eq!(Some(expected), re.find(&mut cache, "foo12345"));
///
/// // Even though a match is found after reading the first byte (`a`),
/// // the leftmost first match semantics demand that we find the earliest
/// // match that prefers earlier parts of the pattern over later parts.
/// let re = PikeVM::new("abc|a")?;
/// let mut cache = re.create_cache();
/// let expected = Match::must(0, 0..3);
/// assert_eq!(Some(expected), re.find(&mut cache, "abc"));
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[inline]
pub fn find<'h, I: Into<Input<'h>>>(
&self,
cache: &mut Cache,
input: I,
) -> Option<Match> {
let input = input.into();
if self.get_nfa().pattern_len() == 1 {
let mut slots = [None, None];
let pid = self.search_slots(cache, &input, &mut slots)?;
let start = slots[0]?.get();
let end = slots[1]?.get();
return Some(Match::new(pid, Span { start, end }));
}
let ginfo = self.get_nfa().group_info();
let slots_len = ginfo.implicit_slot_len();
let mut slots = vec![None; slots_len];
let pid = self.search_slots(cache, &input, &mut slots)?;
let start = slots[pid.as_usize() * 2]?.get();
let end = slots[pid.as_usize() * 2 + 1]?.get();
Some(Match::new(pid, Span { start, end }))
}
/// Executes a leftmost forward search and writes the spans of capturing
/// groups that participated in a match into the provided [`Captures`]
/// value. If no match was found, then [`Captures::is_match`] is guaranteed
/// to return `false`.
///
/// # Example
///
/// ```
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Span};
///
/// let re = PikeVM::new(r"^([0-9]{4})-([0-9]{2})-([0-9]{2})$")?;
/// let (mut cache, mut caps) = (re.create_cache(), re.create_captures());
///
/// re.captures(&mut cache, "2010-03-14", &mut caps);
/// assert!(caps.is_match());
/// assert_eq!(Some(Span::from(0..4)), caps.get_group(1));
/// assert_eq!(Some(Span::from(5..7)), caps.get_group(2));
/// assert_eq!(Some(Span::from(8..10)), caps.get_group(3));
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[inline]
pub fn captures<'h, I: Into<Input<'h>>>(
&self,
cache: &mut Cache,
input: I,
caps: &mut Captures,
) {
self.search(cache, &input.into(), caps)
}
/// Returns an iterator over all non-overlapping leftmost matches in the
/// given bytes. If no match exists, then the iterator yields no elements.
///
/// # Example
///
/// ```
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Match};
///
/// let re = PikeVM::new("foo[0-9]+")?;
/// let mut cache = re.create_cache();
///
/// let text = "foo1 foo12 foo123";
/// let matches: Vec<Match> = re.find_iter(&mut cache, text).collect();
/// assert_eq!(matches, vec![
/// Match::must(0, 0..4),
/// Match::must(0, 5..10),
/// Match::must(0, 11..17),
/// ]);
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[inline]
pub fn find_iter<'r, 'c, 'h, I: Into<Input<'h>>>(
&'r self,
cache: &'c mut Cache,
input: I,
) -> FindMatches<'r, 'c, 'h> {
let caps = Captures::matches(self.get_nfa().group_info().clone());
let it = iter::Searcher::new(input.into());
FindMatches { re: self, cache, caps, it }
}
/// Returns an iterator over all non-overlapping `Captures` values. If no
/// match exists, then the iterator yields no elements.
///
/// This yields the same matches as [`PikeVM::find_iter`], but it includes
/// the spans of all capturing groups that participate in each match.
///
/// **Tip:** See [`util::iter::Searcher`](crate::util::iter::Searcher) for
/// how to correctly iterate over all matches in a haystack while avoiding
/// the creation of a new `Captures` value for every match. (Which you are
/// forced to do with an `Iterator`.)
///
/// # Example
///
/// ```
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Span};
///
/// let re = PikeVM::new("foo(?P<numbers>[0-9]+)")?;
/// let mut cache = re.create_cache();
///
/// let text = "foo1 foo12 foo123";
/// let matches: Vec<Span> = re
/// .captures_iter(&mut cache, text)
/// // The unwrap is OK since 'numbers' matches if the pattern matches.
/// .map(|caps| caps.get_group_by_name("numbers").unwrap())
/// .collect();
/// assert_eq!(matches, vec![
/// Span::from(3..4),
/// Span::from(8..10),
/// Span::from(14..17),
/// ]);
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[inline]
pub fn captures_iter<'r, 'c, 'h, I: Into<Input<'h>>>(
&'r self,
cache: &'c mut Cache,
input: I,
) -> CapturesMatches<'r, 'c, 'h> {
let caps = self.create_captures();
let it = iter::Searcher::new(input.into());
CapturesMatches { re: self, cache, caps, it }
}
}
impl PikeVM {
/// Executes a leftmost forward search and writes the spans of capturing
/// groups that participated in a match into the provided [`Captures`]
/// value. If no match was found, then [`Captures::is_match`] is guaranteed
/// to return `false`.
///
/// This is like [`PikeVM::captures`], but it accepts a concrete `&Input`
/// instead of an `Into<Input>`.
///
/// # Example: specific pattern search
///
/// This example shows how to build a multi-PikeVM that permits searching
/// for specific patterns.
///
/// ```
/// use regex_automata::{
/// nfa::thompson::pikevm::PikeVM,
/// Anchored, Match, PatternID, Input,
/// };
///
/// let re = PikeVM::new_many(&["[a-z0-9]{6}", "[a-z][a-z0-9]{5}"])?;
/// let (mut cache, mut caps) = (re.create_cache(), re.create_captures());
/// let haystack = "foo123";
///
/// // Since we are using the default leftmost-first match and both
/// // patterns match at the same starting position, only the first pattern
/// // will be returned in this case when doing a search for any of the
/// // patterns.
/// let expected = Some(Match::must(0, 0..6));
/// re.search(&mut cache, &Input::new(haystack), &mut caps);
/// assert_eq!(expected, caps.get_match());
///
/// // But if we want to check whether some other pattern matches, then we
/// // can provide its pattern ID.
/// let expected = Some(Match::must(1, 0..6));
/// let input = Input::new(haystack)
/// .anchored(Anchored::Pattern(PatternID::must(1)));
/// re.search(&mut cache, &input, &mut caps);
/// assert_eq!(expected, caps.get_match());
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
///
/// # Example: specifying the bounds of a search
///
/// This example shows how providing the bounds of a search can produce
/// different results than simply sub-slicing the haystack.
///
/// ```
/// # if cfg!(miri) { return Ok(()); } // miri takes too long
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Match, Input};
///
/// let re = PikeVM::new(r"\b[0-9]{3}\b")?;
/// let (mut cache, mut caps) = (re.create_cache(), re.create_captures());
/// let haystack = "foo123bar";
///
/// // Since we sub-slice the haystack, the search doesn't know about
/// // the larger context and assumes that `123` is surrounded by word
/// // boundaries. And of course, the match position is reported relative
/// // to the sub-slice as well, which means we get `0..3` instead of
/// // `3..6`.
/// let expected = Some(Match::must(0, 0..3));
/// re.search(&mut cache, &Input::new(&haystack[3..6]), &mut caps);
/// assert_eq!(expected, caps.get_match());
///
/// // But if we provide the bounds of the search within the context of the
/// // entire haystack, then the search can take the surrounding context
/// // into account. (And if we did find a match, it would be reported
/// // as a valid offset into `haystack` instead of its sub-slice.)
/// let expected = None;
/// let input = Input::new(haystack).range(3..6);
/// re.search(&mut cache, &input, &mut caps);
/// assert_eq!(expected, caps.get_match());
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[inline]
pub fn search(
&self,
cache: &mut Cache,
input: &Input<'_>,
caps: &mut Captures,
) {
caps.set_pattern(None);
let pid = self.search_slots(cache, input, caps.slots_mut());
caps.set_pattern(pid);
}
/// Executes a leftmost forward search and writes the spans of capturing
/// groups that participated in a match into the provided `slots`, and
/// returns the matching pattern ID. The contents of the slots for patterns
/// other than the matching pattern are unspecified. If no match was found,
/// then `None` is returned and the contents of `slots` is unspecified.
///
/// This is like [`PikeVM::search`], but it accepts a raw slots slice
/// instead of a `Captures` value. This is useful in contexts where you
/// don't want or need to allocate a `Captures`.
///
/// It is legal to pass _any_ number of slots to this routine. If the regex
/// engine would otherwise write a slot offset that doesn't fit in the
/// provided slice, then it is simply skipped. In general though, there are
/// usually three slice lengths you might want to use:
///
/// * An empty slice, if you only care about which pattern matched.
/// * A slice with
/// [`pattern_len() * 2`](crate::nfa::thompson::NFA::pattern_len)
/// slots, if you only care about the overall match spans for each matching
/// pattern.
/// * A slice with
/// [`slot_len()`](crate::util::captures::GroupInfo::slot_len) slots, which
/// permits recording match offsets for every capturing group in every
/// pattern.
///
/// # Example
///
/// This example shows how to find the overall match offsets in a
/// multi-pattern search without allocating a `Captures` value. Indeed, we
/// can put our slots right on the stack.
///
/// ```
/// # if cfg!(miri) { return Ok(()); } // miri takes too long
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, PatternID, Input};
///
/// let re = PikeVM::new_many(&[
/// r"\pL+",
/// r"\d+",
/// ])?;
/// let mut cache = re.create_cache();
/// let input = Input::new("!@#123");
///
/// // We only care about the overall match offsets here, so we just
/// // allocate two slots for each pattern. Each slot records the start
/// // and end of the match.
/// let mut slots = [None; 4];
/// let pid = re.search_slots(&mut cache, &input, &mut slots);
/// assert_eq!(Some(PatternID::must(1)), pid);
///
/// // The overall match offsets are always at 'pid * 2' and 'pid * 2 + 1'.
/// // See 'GroupInfo' for more details on the mapping between groups and
/// // slot indices.
/// let slot_start = pid.unwrap().as_usize() * 2;
/// let slot_end = slot_start + 1;
/// assert_eq!(Some(3), slots[slot_start].map(|s| s.get()));
/// assert_eq!(Some(6), slots[slot_end].map(|s| s.get()));
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[inline]
pub fn search_slots(
&self,
cache: &mut Cache,
input: &Input<'_>,
slots: &mut [Option<NonMaxUsize>],
) -> Option<PatternID> {
let utf8empty = self.get_nfa().has_empty() && self.get_nfa().is_utf8();
if !utf8empty {
let hm = self.search_slots_imp(cache, input, slots)?;
return Some(hm.pattern());
}
// There is an unfortunate special case where if the regex can
// match the empty string and UTF-8 mode is enabled, the search
// implementation requires that the slots have at least as much space
// to report the bounds of any match. This is so zero-width matches
// that split a codepoint can be filtered out.
//
// Note that if utf8empty is true, we specialize the case for when
// the number of patterns is 1. In that case, we can just use a stack
// allocation. Otherwise we resort to a heap allocation, which we
// convince ourselves we're fine with due to the pathological nature of
// this case.
let min = self.get_nfa().group_info().implicit_slot_len();
if slots.len() >= min {
let hm = self.search_slots_imp(cache, input, slots)?;
return Some(hm.pattern());
}
if self.get_nfa().pattern_len() == 1 {
let mut enough = [None, None];
let got = self.search_slots_imp(cache, input, &mut enough);
// This is OK because we know `enough` is strictly bigger than
// `slots`, otherwise this special case isn't reached.
slots.copy_from_slice(&enough[..slots.len()]);
return got.map(|hm| hm.pattern());
}
let mut enough = vec![None; min];
let got = self.search_slots_imp(cache, input, &mut enough);
// This is OK because we know `enough` is strictly bigger than `slots`,
// otherwise this special case isn't reached.
slots.copy_from_slice(&enough[..slots.len()]);
got.map(|hm| hm.pattern())
}
/// This is the actual implementation of `search_slots_imp` that
/// doesn't account for the special case when 1) the NFA has UTF-8 mode
/// enabled, 2) the NFA can match the empty string and 3) the caller has
/// provided an insufficient number of slots to record match offsets.
#[inline(never)]
fn search_slots_imp(
&self,
cache: &mut Cache,
input: &Input<'_>,
slots: &mut [Option<NonMaxUsize>],
) -> Option<HalfMatch> {
let utf8empty = self.get_nfa().has_empty() && self.get_nfa().is_utf8();
let hm = match self.search_imp(cache, input, slots) {
None => return None,
Some(hm) if !utf8empty => return Some(hm),
Some(hm) => hm,
};
empty::skip_splits_fwd(input, hm, hm.offset(), |input| {
Ok(self
.search_imp(cache, input, slots)
.map(|hm| (hm, hm.offset())))
})
// OK because the PikeVM never errors.
.unwrap()
}
/// Writes the set of patterns that match anywhere in the given search
/// configuration to `patset`. If multiple patterns match at the same
/// position and this `PikeVM` was configured with [`MatchKind::All`]
/// semantics, then all matching patterns are written to the given set.
///
/// Unless all of the patterns in this `PikeVM` are anchored, then
/// generally speaking, this will visit every byte in the haystack.
///
/// This search routine *does not* clear the pattern set. This gives some
/// flexibility to the caller (e.g., running multiple searches with the
/// same pattern set), but does make the API bug-prone if you're reusing
/// the same pattern set for multiple searches but intended them to be
/// independent.
///
/// If a pattern ID matched but the given `PatternSet` does not have
/// sufficient capacity to store it, then it is not inserted and silently
/// dropped.
///
/// # Example
///
/// This example shows how to find all matching patterns in a haystack,
/// even when some patterns match at the same position as other patterns.
///
/// ```
/// # if cfg!(miri) { return Ok(()); } // miri takes too long
/// use regex_automata::{
/// nfa::thompson::pikevm::PikeVM,
/// Input, MatchKind, PatternSet,
/// };
///
/// let patterns = &[
/// r"\w+", r"\d+", r"\pL+", r"foo", r"bar", r"barfoo", r"foobar",
/// ];
/// let re = PikeVM::builder()
/// .configure(PikeVM::config().match_kind(MatchKind::All))
/// .build_many(patterns)?;
/// let mut cache = re.create_cache();
///
/// let input = Input::new("foobar");
/// let mut patset = PatternSet::new(re.pattern_len());
/// re.which_overlapping_matches(&mut cache, &input, &mut patset);
/// let expected = vec![0, 2, 3, 4, 6];
/// let got: Vec<usize> = patset.iter().map(|p| p.as_usize()).collect();
/// assert_eq!(expected, got);
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
#[inline]
pub fn which_overlapping_matches(
&self,
cache: &mut Cache,
input: &Input<'_>,
patset: &mut PatternSet,
) {
self.which_overlapping_imp(cache, input, patset)
}
}
impl PikeVM {
/// The implementation of standard leftmost search.
///
/// Capturing group spans are written to `slots`, but only if requested.
/// `slots` can be any length. Any slot in the NFA that is activated but
/// which is out of bounds for the given `slots` is ignored.
fn search_imp(
&self,
cache: &mut Cache,
input: &Input<'_>,
slots: &mut [Option<NonMaxUsize>],
) -> Option<HalfMatch> {
cache.setup_search(slots.len());
if input.is_done() {
return None;
}
// Why do we even care about this? Well, in our 'Captures'
// representation, we use usize::MAX as a sentinel to indicate "no
// match." This isn't problematic so long as our haystack doesn't have
// a maximal length. Byte slices are guaranteed by Rust to have a
// length that fits into isize, and so this assert should always pass.
// But we put it here to make our assumption explicit.
assert!(
input.haystack().len() < core::usize::MAX,
"byte slice lengths must be less than usize MAX",
);
instrument!(|c| c.reset(&self.nfa));
// Whether we want to visit all match states instead of emulating the
// 'leftmost' semantics of typical backtracking regex engines.
let allmatches =
self.config.get_match_kind().continue_past_first_match();
let (anchored, start_id) = match self.start_config(input) {
None => return None,
Some(config) => config,
};
let pre =
if anchored { None } else { self.get_config().get_prefilter() };
let Cache { ref mut stack, ref mut curr, ref mut next } = cache;
let mut hm = None;
// Yes, our search doesn't end at input.end(), but includes it. This
// is necessary because matches are delayed by one byte, just like
// how the DFA engines work. The delay is used to handle look-behind
// assertions. In the case of the PikeVM, the delay is implemented
// by not considering a match to exist until it is visited in
// 'steps'. Technically, we know a match exists in the previous
// iteration via 'epsilon_closure'. (It's the same thing in NFA-to-DFA
// determinization. We don't mark a DFA state as a match state if it
// contains an NFA match state, but rather, whether the DFA state was
// generated by a transition from a DFA state that contains an NFA
// match state.)
let mut at = input.start();
while at <= input.end() {
// If we have no states left to visit, then there are some cases
// where we know we can quit early or even skip ahead.
if curr.set.is_empty() {
// We have a match and we haven't been instructed to continue
// on even after finding a match, so we can quit.
if hm.is_some() && !allmatches {
break;
}
// If we're running an anchored search and we've advanced
// beyond the start position with no other states to try, then
// we will never observe a match and thus can stop.
if anchored && at > input.start() {
break;
}
// If there no states left to explore at this position and we
// know we can't terminate early, then we are effectively at
// the starting state of the NFA. If we fell through here,
// we'd end up adding our '(?s-u:.)*?' prefix and it would be
// the only thing in 'curr'. So we might as well just skip
// ahead until we find something that we know might advance us
// forward.
if let Some(ref pre) = pre {
let span = Span::from(at..input.end());
match pre.find(input.haystack(), span) {
None => break,
Some(ref span) => at = span.start,
}
}
}
// Instead of using the NFA's unanchored start state, we actually
// always use its anchored starting state. As a result, when doing
// an unanchored search, we need to simulate our own '(?s-u:.)*?'
// prefix, to permit a match to appear anywhere.
//
// Now, we don't *have* to do things this way. We could use the
// NFA's unanchored starting state and do one 'epsilon_closure'
// call from that starting state before the main loop here. And
// that is just as correct. However, it turns out to be slower
// than our approach here because it slightly increases the cost
// of processing each byte by requiring us to visit more NFA
// states to deal with the additional NFA states in the unanchored
// prefix. By simulating it explicitly here, we lower those costs
// substantially. The cost is itself small, but it adds up for
// large haystacks.
//
// In order to simulate the '(?s-u:.)*?' prefix---which is not
// greedy---we are careful not to perform an epsilon closure on
// the start state if we already have a match. Namely, if we
// did otherwise, we would never reach a terminating condition
// because there would always be additional states to process.
// In effect, the exclusion of running 'epsilon_closure' when
// we have a match corresponds to the "dead" states we have in
// our DFA regex engines. Namely, in a DFA, match states merely
// instruct the search execution to record the current offset as
// the most recently seen match. It is the dead state that actually
// indicates when to stop the search (other than EOF or quit
// states).
//
// However, when 'allmatches' is true, the caller has asked us to
// leave in every possible match state. This tends not to make a
// whole lot of sense in unanchored searches, because it means the
// search really cannot terminate until EOF. And often, in that
// case, you wind up skipping over a bunch of matches and are left
// with the "last" match. Arguably, it just doesn't make a lot of
// sense to run a 'leftmost' search (which is what this routine is)
// with 'allmatches' set to true. But the DFAs support it and this
// matches their behavior. (Generally, 'allmatches' is useful for
// overlapping searches or leftmost anchored searches to find the
// longest possible match by ignoring match priority.)
//
// Additionally, when we're running an anchored search, this
// epsilon closure should only be computed at the beginning of the
// search. If we re-computed it at every position, we would be
// simulating an unanchored search when we were tasked to perform
// an anchored search.
if (!hm.is_some() || allmatches)
&& (!anchored || at == input.start())
{
// Since we are adding to the 'curr' active states and since
// this is for the start ID, we use a slots slice that is
// guaranteed to have the right length but where every element
// is absent. This is exactly what we want, because this
// epsilon closure is responsible for simulating an unanchored
// '(?s:.)*?' prefix. It is specifically outside of any
// capturing groups, and thus, using slots that are always
// absent is correct.
//
// Note though that we can't just use '&mut []' here, since
// this epsilon closure may traverse through 'Captures' epsilon
// transitions, and thus must be able to write offsets to the
// slots given which are later copied to slot values in 'curr'.
let slots = next.slot_table.all_absent();
self.epsilon_closure(stack, slots, curr, input, at, start_id);
}
if let Some(pid) = self.nexts(stack, curr, next, input, at, slots)
{
hm = Some(HalfMatch::new(pid, at));
}
// Unless the caller asked us to return early, we need to mush on
// to see if we can extend our match. (But note that 'nexts' will
// quit right after seeing a match when match_kind==LeftmostFirst,
// as is consistent with leftmost-first match priority.)
if input.get_earliest() && hm.is_some() {
break;
}
core::mem::swap(curr, next);
next.set.clear();
at += 1;
}
instrument!(|c| c.eprint(&self.nfa));
hm
}
/// The implementation for the 'which_overlapping_matches' API. Basically,
/// we do a single scan through the entire haystack (unless our regex
/// or search is anchored) and record every pattern that matched. In
/// particular, when MatchKind::All is used, this supports overlapping
/// matches. So if we have the regexes 'sam' and 'samwise', they will
/// *both* be reported in the pattern set when searching the haystack
/// 'samwise'.
fn which_overlapping_imp(
&self,
cache: &mut Cache,
input: &Input<'_>,
patset: &mut PatternSet,
) {
// NOTE: This is effectively a copy of 'search_imp' above, but with no
// captures support and instead writes patterns that matched directly
// to 'patset'. See that routine for better commentary about what's
// going on in this routine. We probably could unify the routines using
// generics or more helper routines, but I'm not sure it's worth it.
//
// NOTE: We somewhat go out of our way here to support things like
// 'input.get_earliest()' and 'leftmost-first' match semantics. Neither
// of those seem particularly relevant to this routine, but they are
// both supported by the DFA analogs of this routine by construction
// and composition, so it seems like good sense to have the PikeVM
// match that behavior.
cache.setup_search(0);
if input.is_done() {
return;
}
assert!(
input.haystack().len() < core::usize::MAX,
"byte slice lengths must be less than usize MAX",
);
instrument!(|c| c.reset(&self.nfa));
let allmatches =
self.config.get_match_kind().continue_past_first_match();
let (anchored, start_id) = match self.start_config(input) {
None => return,
Some(config) => config,
};
let Cache { ref mut stack, ref mut curr, ref mut next } = cache;
for at in input.start()..=input.end() {
let any_matches = !patset.is_empty();
if curr.set.is_empty() {
if any_matches && !allmatches {
break;
}
if anchored && at > input.start() {
break;
}
}
if !any_matches || allmatches {
let slots = &mut [];
self.epsilon_closure(stack, slots, curr, input, at, start_id);
}
self.nexts_overlapping(stack, curr, next, input, at, patset);
// If we found a match and filled our set, then there is no more
// additional info that we can provide. Thus, we can quit. We also
// quit if the caller asked us to stop at the earliest point that
// we know a match exists.
if patset.is_full() || input.get_earliest() {
break;
}
core::mem::swap(curr, next);
next.set.clear();
}
instrument!(|c| c.eprint(&self.nfa));
}
/// Process the active states in 'curr' to find the states (written to
/// 'next') we should process for the next byte in the haystack.
///
/// 'stack' is used to perform a depth first traversal of the NFA when
/// computing an epsilon closure.
///
/// When a match is found, the slots for that match state (in 'curr') are
/// copied to 'caps'. Moreover, once a match is seen, processing for 'curr'
/// stops (unless the PikeVM was configured with MatchKind::All semantics).
#[cfg_attr(feature = "perf-inline", inline(always))]
fn nexts(
&self,
stack: &mut Vec<FollowEpsilon>,
curr: &mut ActiveStates,
next: &mut ActiveStates,
input: &Input<'_>,
at: usize,
slots: &mut [Option<NonMaxUsize>],
) -> Option<PatternID> {
instrument!(|c| c.record_state_set(&curr.set));
let mut pid = None;
let ActiveStates { ref set, ref mut slot_table } = *curr;
for sid in set.iter() {
pid = match self.next(stack, slot_table, next, input, at, sid) {
None => continue,
Some(pid) => Some(pid),
};
slots.copy_from_slice(slot_table.for_state(sid));
if !self.config.get_match_kind().continue_past_first_match() {
break;
}
}
pid
}
/// Like 'nexts', but for the overlapping case. This doesn't write any
/// slots, and instead just writes which pattern matched in 'patset'.
#[cfg_attr(feature = "perf-inline", inline(always))]
fn nexts_overlapping(
&self,
stack: &mut Vec<FollowEpsilon>,
curr: &mut ActiveStates,
next: &mut ActiveStates,
input: &Input<'_>,
at: usize,
patset: &mut PatternSet,
) {
instrument!(|c| c.record_state_set(&curr.set));
let utf8empty = self.get_nfa().has_empty() && self.get_nfa().is_utf8();
let ActiveStates { ref set, ref mut slot_table } = *curr;
for sid in set.iter() {
let pid = match self.next(stack, slot_table, next, input, at, sid)
{
None => continue,
Some(pid) => pid,
};
// This handles the case of finding a zero-width match that splits
// a codepoint. Namely, if we're in UTF-8 mode AND we know we can
// match the empty string, then the only valid way of getting to
// this point with an offset that splits a codepoint is when we
// have an empty match. Such matches, in UTF-8 mode, must not be
// reported. So we just skip them here and pretend as if we did
// not see a match.
if utf8empty && !input.is_char_boundary(at) {
continue;
}
let _ = patset.try_insert(pid);
if !self.config.get_match_kind().continue_past_first_match() {
break;
}
}
}
/// Starting from 'sid', if the position 'at' in the 'input' haystack has a
/// transition defined out of 'sid', then add the state transitioned to and
/// its epsilon closure to the 'next' set of states to explore.
///
/// 'stack' is used by the epsilon closure computation to perform a depth
/// first traversal of the NFA.
///
/// 'curr_slot_table' should be the table of slots for the current set of
/// states being explored. If there is a transition out of 'sid', then
/// sid's row in the slot table is used to perform the epsilon closure.
#[cfg_attr(feature = "perf-inline", inline(always))]
fn next(
&self,
stack: &mut Vec<FollowEpsilon>,
curr_slot_table: &mut SlotTable,
next: &mut ActiveStates,
input: &Input<'_>,
at: usize,
sid: StateID,
) -> Option<PatternID> {
instrument!(|c| c.record_step(sid));
match *self.nfa.state(sid) {
State::Fail
| State::Look { .. }
| State::Union { .. }
| State::BinaryUnion { .. }
| State::Capture { .. } => None,
State::ByteRange { ref trans } => {
if trans.matches(input.haystack(), at) {
let slots = curr_slot_table.for_state(sid);
// OK because 'at <= haystack.len() < usize::MAX', so
// adding 1 will never wrap.
let at = at.wrapping_add(1);
self.epsilon_closure(
stack, slots, next, input, at, trans.next,
);
}
None
}
State::Sparse(ref sparse) => {
if let Some(next_sid) = sparse.matches(input.haystack(), at) {
let slots = curr_slot_table.for_state(sid);
// OK because 'at <= haystack.len() < usize::MAX', so
// adding 1 will never wrap.
let at = at.wrapping_add(1);
self.epsilon_closure(
stack, slots, next, input, at, next_sid,
);
}
None
}
State::Dense(ref dense) => {
if let Some(next_sid) = dense.matches(input.haystack(), at) {
let slots = curr_slot_table.for_state(sid);
// OK because 'at <= haystack.len() < usize::MAX', so
// adding 1 will never wrap.
let at = at.wrapping_add(1);
self.epsilon_closure(
stack, slots, next, input, at, next_sid,
);
}
None
}
State::Match { pattern_id } => Some(pattern_id),
}
}
/// Compute the epsilon closure of 'sid', writing the closure into 'next'
/// while copying slot values from 'curr_slots' into corresponding states
/// in 'next'. 'curr_slots' should be the slot values corresponding to
/// 'sid'.
///
/// The given 'stack' is used to perform a depth first traversal of the
/// NFA by recursively following all epsilon transitions out of 'sid'.
/// Conditional epsilon transitions are followed if and only if they are
/// satisfied for the position 'at' in the 'input' haystack.
///
/// While this routine may write to 'curr_slots', once it returns, any
/// writes are undone and the original values (even if absent) are
/// restored.
#[cfg_attr(feature = "perf-inline", inline(always))]
fn epsilon_closure(
&self,
stack: &mut Vec<FollowEpsilon>,
curr_slots: &mut [Option<NonMaxUsize>],
next: &mut ActiveStates,
input: &Input<'_>,
at: usize,
sid: StateID,
) {
instrument!(|c| {
c.record_closure(sid);
c.record_stack_push(sid);
});
stack.push(FollowEpsilon::Explore(sid));
while let Some(frame) = stack.pop() {
match frame {
FollowEpsilon::RestoreCapture { slot, offset: pos } => {
curr_slots[slot] = pos;
}
FollowEpsilon::Explore(sid) => {
self.epsilon_closure_explore(
stack, curr_slots, next, input, at, sid,
);
}
}
}
}
/// Explore all of the epsilon transitions out of 'sid'. This is mostly
/// split out from 'epsilon_closure' in order to clearly delineate
/// the actual work of computing an epsilon closure from the stack
/// book-keeping.
///
/// This will push any additional explorations needed on to 'stack'.
///
/// 'curr_slots' should refer to the slots for the currently active NFA
/// state. That is, the current state we are stepping through. These
/// slots are mutated in place as new 'Captures' states are traversed
/// during epsilon closure, but the slots are restored to their original
/// values once the full epsilon closure is completed. The ultimate use of
/// 'curr_slots' is to copy them to the corresponding 'next_slots', so that
/// the capturing group spans are forwarded from the currently active state
/// to the next.
///
/// 'next' refers to the next set of active states. Computing an epsilon
/// closure may increase the next set of active states.
///
/// 'input' refers to the caller's input configuration and 'at' refers to
/// the current position in the haystack. These are used to check whether
/// conditional epsilon transitions (like look-around) are satisfied at
/// the current position. If they aren't, then the epsilon closure won't
/// include them.
#[cfg_attr(feature = "perf-inline", inline(always))]
fn epsilon_closure_explore(
&self,
stack: &mut Vec<FollowEpsilon>,
curr_slots: &mut [Option<NonMaxUsize>],
next: &mut ActiveStates,
input: &Input<'_>,
at: usize,
mut sid: StateID,
) {
// We can avoid pushing some state IDs on to our stack in precisely
// the cases where a 'push(x)' would be immediately followed by a 'x
// = pop()'. This is achieved by this outer-loop. We simply set 'sid'
// to be the next state ID we want to explore once we're done with
// our initial exploration. In practice, this avoids a lot of stack
// thrashing.
loop {
instrument!(|c| c.record_set_insert(sid));
// Record this state as part of our next set of active states. If
// we've already explored it, then no need to do it again.
if !next.set.insert(sid) {
return;
}
match *self.nfa.state(sid) {
State::Fail
| State::Match { .. }
| State::ByteRange { .. }
| State::Sparse { .. }
| State::Dense { .. } => {
next.slot_table.for_state(sid).copy_from_slice(curr_slots);
return;
}
State::Look { look, next } => {
// OK because we don't permit building a searcher with a
// Unicode word boundary if the requisite Unicode data is
// unavailable.
if !self.nfa.look_matcher().matches_inline(
look,
input.haystack(),
at,
) {
return;
}
sid = next;
}
State::Union { ref alternates } => {
sid = match alternates.get(0) {
None => return,
Some(&sid) => sid,
};
instrument!(|c| {
for &alt in &alternates[1..] {
c.record_stack_push(alt);
}
});
stack.extend(
alternates[1..]
.iter()
.copied()
.rev()
.map(FollowEpsilon::Explore),
);
}
State::BinaryUnion { alt1, alt2 } => {
sid = alt1;
instrument!(|c| c.record_stack_push(sid));
stack.push(FollowEpsilon::Explore(alt2));
}
State::Capture { next, slot, .. } => {
// There's no need to do anything with slots that
// ultimately won't be copied into the caller-provided
// 'Captures' value. So we just skip dealing with them at
// all.
if slot.as_usize() < curr_slots.len() {
instrument!(|c| c.record_stack_push(sid));
stack.push(FollowEpsilon::RestoreCapture {
slot,
offset: curr_slots[slot],
});
// OK because length of a slice must fit into an isize.
curr_slots[slot] = Some(NonMaxUsize::new(at).unwrap());
}
sid = next;
}
}
}
}
/// Return the starting configuration of a PikeVM search.
///
/// The "start config" is basically whether the search should be anchored
/// or not and the NFA state ID at which to begin the search. The state ID
/// returned always corresponds to an anchored starting state even when the
/// search is unanchored. This is because the PikeVM search loop deals with
/// unanchored searches with an explicit epsilon closure out of the start
/// state.
///
/// This routine accounts for both the caller's `Input` configuration
/// and the pattern itself. For example, even if the caller asks for an
/// unanchored search, if the pattern itself is anchored, then this will
/// always return 'true' because implementing an unanchored search in that
/// case would be incorrect.
///
/// Similarly, if the caller requests an anchored search for a particular
/// pattern, then the starting state ID returned will reflect that.
///
/// If a pattern ID is given in the input configuration that is not in
/// this regex, then `None` is returned.
fn start_config(&self, input: &Input<'_>) -> Option<(bool, StateID)> {
match input.get_anchored() {
// Only way we're unanchored is if both the caller asked for an
// unanchored search *and* the pattern is itself not anchored.
Anchored::No => Some((
self.nfa.is_always_start_anchored(),
self.nfa.start_anchored(),
)),
Anchored::Yes => Some((true, self.nfa.start_anchored())),
Anchored::Pattern(pid) => {
Some((true, self.nfa.start_pattern(pid)?))
}
}
}
}
/// An iterator over all non-overlapping matches for a particular search.
///
/// The iterator yields a [`Match`] value until no more matches could be found.
///
/// The lifetime parameters are as follows:
///
/// * `'r` represents the lifetime of the PikeVM.
/// * `'c` represents the lifetime of the PikeVM's cache.
/// * `'h` represents the lifetime of the haystack being searched.
///
/// This iterator can be created with the [`PikeVM::find_iter`] method.
#[derive(Debug)]
pub struct FindMatches<'r, 'c, 'h> {
re: &'r PikeVM,
cache: &'c mut Cache,
caps: Captures,
it: iter::Searcher<'h>,
}
impl<'r, 'c, 'h> Iterator for FindMatches<'r, 'c, 'h> {
type Item = Match;
#[inline]
fn next(&mut self) -> Option<Match> {
// Splitting 'self' apart seems necessary to appease borrowck.
let FindMatches { re, ref mut cache, ref mut caps, ref mut it } =
*self;
// 'advance' converts errors into panics, which is OK here because
// the PikeVM can never return an error.
it.advance(|input| {
re.search(cache, input, caps);
Ok(caps.get_match())
})
}
}
/// An iterator over all non-overlapping leftmost matches, with their capturing
/// groups, for a particular search.
///
/// The iterator yields a [`Captures`] value until no more matches could be
/// found.
///
/// The lifetime parameters are as follows:
///
/// * `'r` represents the lifetime of the PikeVM.
/// * `'c` represents the lifetime of the PikeVM's cache.
/// * `'h` represents the lifetime of the haystack being searched.
///
/// This iterator can be created with the [`PikeVM::captures_iter`] method.
#[derive(Debug)]
pub struct CapturesMatches<'r, 'c, 'h> {
re: &'r PikeVM,
cache: &'c mut Cache,
caps: Captures,
it: iter::Searcher<'h>,
}
impl<'r, 'c, 'h> Iterator for CapturesMatches<'r, 'c, 'h> {
type Item = Captures;
#[inline]
fn next(&mut self) -> Option<Captures> {
// Splitting 'self' apart seems necessary to appease borrowck.
let CapturesMatches { re, ref mut cache, ref mut caps, ref mut it } =
*self;
// 'advance' converts errors into panics, which is OK here because
// the PikeVM can never return an error.
it.advance(|input| {
re.search(cache, input, caps);
Ok(caps.get_match())
});
if caps.is_match() {
Some(caps.clone())
} else {
None
}
}
}
/// A cache represents mutable state that a [`PikeVM`] requires during a
/// search.
///
/// For a given [`PikeVM`], its corresponding cache may be created either via
/// [`PikeVM::create_cache`], or via [`Cache::new`]. They are equivalent in
/// every way, except the former does not require explicitly importing `Cache`.
///
/// A particular `Cache` is coupled with the [`PikeVM`] from which it
/// was created. It may only be used with that `PikeVM`. A cache and its
/// allocations may be re-purposed via [`Cache::reset`], in which case, it can
/// only be used with the new `PikeVM` (and not the old one).
#[derive(Clone, Debug)]
pub struct Cache {
/// Stack used while computing epsilon closure. This effectively lets us
/// move what is more naturally expressed through recursion to a stack
/// on the heap.
stack: Vec<FollowEpsilon>,
/// The current active states being explored for the current byte in the
/// haystack.
curr: ActiveStates,
/// The next set of states we're building that will be explored for the
/// next byte in the haystack.
next: ActiveStates,
}
impl Cache {
/// Create a new [`PikeVM`] cache.
///
/// A potentially more convenient routine to create a cache is
/// [`PikeVM::create_cache`], as it does not require also importing the
/// `Cache` type.
///
/// If you want to reuse the returned `Cache` with some other `PikeVM`,
/// then you must call [`Cache::reset`] with the desired `PikeVM`.
pub fn new(re: &PikeVM) -> Cache {
Cache {
stack: vec![],
curr: ActiveStates::new(re),
next: ActiveStates::new(re),
}
}
/// Reset this cache such that it can be used for searching with a
/// different [`PikeVM`].
///
/// A cache reset permits reusing memory already allocated in this cache
/// with a different `PikeVM`.
///
/// # Example
///
/// This shows how to re-purpose a cache for use with a different `PikeVM`.
///
/// ```
/// # if cfg!(miri) { return Ok(()); } // miri takes too long
/// use regex_automata::{nfa::thompson::pikevm::PikeVM, Match};
///
/// let re1 = PikeVM::new(r"\w")?;
/// let re2 = PikeVM::new(r"\W")?;
///
/// let mut cache = re1.create_cache();
/// assert_eq!(
/// Some(Match::must(0, 0..2)),
/// re1.find_iter(&mut cache, "Δ").next(),
/// );
///
/// // Using 'cache' with re2 is not allowed. It may result in panics or
/// // incorrect results. In order to re-purpose the cache, we must reset
/// // it with the PikeVM we'd like to use it with.
/// //
/// // Similarly, after this reset, using the cache with 're1' is also not
/// // allowed.
/// cache.reset(&re2);
/// assert_eq!(
/// Some(Match::must(0, 0..3)),
/// re2.find_iter(&mut cache, "☃").next(),
/// );
///
/// # Ok::<(), Box<dyn std::error::Error>>(())
/// ```
pub fn reset(&mut self, re: &PikeVM) {
self.curr.reset(re);
self.next.reset(re);
}
/// Returns the heap memory usage, in bytes, of this cache.
///
/// This does **not** include the stack size used up by this cache. To
/// compute that, use `std::mem::size_of::<Cache>()`.
pub fn memory_usage(&self) -> usize {
use core::mem::size_of;
(self.stack.len() * size_of::<FollowEpsilon>())
+ self.curr.memory_usage()
+ self.next.memory_usage()
}
/// Clears this cache. This should be called at the start of every search
/// to ensure we start with a clean slate.
///
/// This also sets the length of the capturing groups used in the current
/// search. This permits an optimization where by 'SlotTable::for_state'
/// only returns the number of slots equivalent to the number of slots
/// given in the 'Captures' value. This may be less than the total number
/// of possible slots, e.g., when one only wants to track overall match
/// offsets. This in turn permits less copying of capturing group spans
/// in the PikeVM.
fn setup_search(&mut self, captures_slot_len: usize) {
self.stack.clear();
self.curr.setup_search(captures_slot_len);
self.next.setup_search(captures_slot_len);
}
}
/// A set of active states used to "simulate" the execution of an NFA via the
/// PikeVM.
///
/// There are two sets of these used during NFA simulation. One set corresponds
/// to the "current" set of states being traversed for the current position
/// in a haystack. The other set corresponds to the "next" set of states being
/// built, which will become the new "current" set for the next position in the
/// haystack. These two sets correspond to CLIST and NLIST in Thompson's
///
/// In addition to representing a set of NFA states, this also maintains slot
/// values for each state. These slot values are what turn the NFA simulation
/// into the "Pike VM." Namely, they track capturing group values for each
/// state. During the computation of epsilon closure, we copy slot values from
/// states in the "current" set to the "next" set. Eventually, once a match
/// is found, the slot values for that match state are what we write to the
/// caller provided 'Captures' value.
#[derive(Clone, Debug)]
struct ActiveStates {
/// The set of active NFA states. This set preserves insertion order, which
/// is critical for simulating the match semantics of backtracking regex
/// engines.
set: SparseSet,
/// The slots for every NFA state, where each slot stores a (possibly
/// absent) offset. Every capturing group has two slots. One for a start
/// offset and one for an end offset.
slot_table: SlotTable,
}
impl ActiveStates {
/// Create a new set of active states for the given PikeVM. The active
/// states returned may only be used with the given PikeVM. (Use 'reset'
/// to re-purpose the allocation for a different PikeVM.)
fn new(re: &PikeVM) -> ActiveStates {
let mut active = ActiveStates {
set: SparseSet::new(0),
slot_table: SlotTable::new(),
};
active.reset(re);
active
}
/// Reset this set of active states such that it can be used with the given
/// PikeVM (and only that PikeVM).
fn reset(&mut self, re: &PikeVM) {
self.set.resize(re.get_nfa().states().len());
self.slot_table.reset(re);
}
/// Return the heap memory usage, in bytes, used by this set of active
/// states.
///
/// This does not include the stack size of this value.
fn memory_usage(&self) -> usize {
self.set.memory_usage() + self.slot_table.memory_usage()
}
/// Setup this set of active states for a new search. The given slot
/// length should be the number of slots in a caller provided 'Captures'
/// (and may be zero).
fn setup_search(&mut self, captures_slot_len: usize) {
self.set.clear();
self.slot_table.setup_search(captures_slot_len);
}
}
/// A table of slots, where each row represent a state in an NFA. Thus, the
/// table has room for storing slots for every single state in an NFA.
///
/// This table is represented with a single contiguous allocation. In general,
/// the notion of "capturing group" doesn't really exist at this level of
/// abstraction, hence the name "slot" instead. (Indeed, every capturing group
/// maps to a pair of slots, one for the start offset and one for the end
/// offset.) Slots are indexed by the 'Captures' NFA state.
///
/// N.B. Not every state actually needs a row of slots. Namely, states that
/// only have epsilon transitions currently never have anything written to
/// their rows in this table. Thus, the table is somewhat wasteful in its heap
/// usage. However, it is important to maintain fast random access by state
/// ID, which means one giant table tends to work well. RE2 takes a different
/// approach here and allocates each row as its own reference counted thing.
/// I explored such a strategy at one point here, but couldn't get it to work
/// well using entirely safe code. (To the ambitious reader: I encourage you to
/// re-litigate that experiment.) I very much wanted to stick to safe code, but
/// could be convinced otherwise if there was a solid argument and the safety
/// was encapsulated well.
#[derive(Clone, Debug)]
struct SlotTable {
/// The actual table of offsets.
table: Vec<Option<NonMaxUsize>>,
/// The number of slots per state, i.e., the table's stride or the length
/// of each row.
slots_per_state: usize,
/// The number of slots in the caller-provided 'Captures' value for the
/// current search. Setting this to 'slots_per_state' is always correct,
/// but may be wasteful.
slots_for_captures: usize,
}
impl SlotTable {
/// Create a new slot table.
///
/// One should call 'reset' with the corresponding PikeVM before use.
fn new() -> SlotTable {
SlotTable { table: vec![], slots_for_captures: 0, slots_per_state: 0 }
}
/// Reset this slot table such that it can be used with the given PikeVM
/// (and only that PikeVM).
fn reset(&mut self, re: &PikeVM) {
let nfa = re.get_nfa();
self.slots_per_state = nfa.group_info().slot_len();
// This is always correct, but may be reduced for a particular search
// if a 'Captures' has fewer slots, e.g., none at all or only slots
// for tracking the overall match instead of all slots for every
// group.
self.slots_for_captures = core::cmp::max(
self.slots_per_state,
nfa.pattern_len().checked_mul(2).unwrap(),
);
let len = nfa
.states()
.len()
.checked_mul(self.slots_per_state)
// Add space to account for scratch space used during a search.
.and_then(|x| x.checked_add(self.slots_for_captures))
// It seems like this could actually panic on legitimate inputs on
// 32-bit targets, and very likely to panic on 16-bit. Should we
// somehow convert this to an error? What about something similar
// for the lazy DFA cache? If you're tripping this assert, please
// file a bug.
.expect("slot table length doesn't overflow");
// This happens about as often as a regex is compiled, so it probably
// should be at debug level, but I found it quite distracting and not
// particularly useful.
trace!(
"resizing PikeVM active states table to {} entries \
(slots_per_state={})",
len,
self.slots_per_state,
);
self.table.resize(len, None);
}
/// Return the heap memory usage, in bytes, used by this slot table.
///
/// This does not include the stack size of this value.
fn memory_usage(&self) -> usize {
self.table.len() * core::mem::size_of::<Option<NonMaxUsize>>()
}
/// Perform any per-search setup for this slot table.
///
/// In particular, this sets the length of the number of slots used in the
/// 'Captures' given by the caller (if any at all). This number may be
/// smaller than the total number of slots available, e.g., when the caller
/// is only interested in tracking the overall match and not the spans of
/// every matching capturing group. Only tracking the overall match can
/// save a substantial amount of time copying capturing spans during a
/// search.
fn setup_search(&mut self, captures_slot_len: usize) {
self.slots_for_captures = captures_slot_len;
}
/// Return a mutable slice of the slots for the given state.
///
/// Note that the length of the slice returned may be less than the total
/// number of slots available for this state. In particular, the length
/// always matches the number of slots indicated via 'setup_search'.
fn for_state(&mut self, sid: StateID) -> &mut [Option<NonMaxUsize>] {
let i = sid.as_usize() * self.slots_per_state;
&mut self.table[i..i + self.slots_for_captures]
}
/// Return a slice of slots of appropriate length where every slot offset
/// is guaranteed to be absent. This is useful in cases where you need to
/// compute an epsilon closure outside of the user supplied regex, and thus
/// never want it to have any capturing slots set.
fn all_absent(&mut self) -> &mut [Option<NonMaxUsize>] {
let i = self.table.len() - self.slots_for_captures;
&mut self.table[i..i + self.slots_for_captures]
}
}
/// Represents a stack frame for use while computing an epsilon closure.
///
/// (An "epsilon closure" refers to the set of reachable NFA states from a
/// single state without consuming any input. That is, the set of all epsilon
/// transitions not only from that single state, but from every other state
/// reachable by an epsilon transition as well. This is why it's called a
/// "closure." Computing an epsilon closure is also done during DFA
/// determinization! Compare and contrast the epsilon closure here in this
/// PikeVM and the one used for determinization in crate::util::determinize.)
///
/// Computing the epsilon closure in a Thompson NFA proceeds via a depth
/// first traversal over all epsilon transitions from a particular state.
/// (A depth first traversal is important because it emulates the same priority
/// of matches that is typically found in backtracking regex engines.) This
/// depth first traversal is naturally expressed using recursion, but to avoid
/// a call stack size proportional to the size of a regex, we put our stack on
/// the heap instead.
///
/// This stack thus consists of call frames. The typical call frame is
/// `Explore`, which instructs epsilon closure to explore the epsilon
/// transitions from that state. (Subsequent epsilon transitions are then
/// pushed on to the stack as more `Explore` frames.) If the state ID being
/// explored has no epsilon transitions, then the capturing group slots are
/// copied from the original state that sparked the epsilon closure (from the
/// 'step' routine) to the state ID being explored. This way, capturing group
/// slots are forwarded from the previous state to the next.
///
/// The other stack frame, `RestoreCaptures`, instructs the epsilon closure to
/// set the position for a particular slot back to some particular offset. This
/// frame is pushed when `Explore` sees a `Capture` transition. `Explore` will
/// set the offset of the slot indicated in `Capture` to the current offset,
/// and then push the old offset on to the stack as a `RestoreCapture` frame.
/// Thus, the new offset is only used until the epsilon closure reverts back to
/// the `RestoreCapture` frame. In effect, this gives the `Capture` epsilon
/// transition its "scope" to only states that come "after" it during depth
/// first traversal.
#[derive(Clone, Debug)]
enum FollowEpsilon {
/// Explore the epsilon transitions from a state ID.
Explore(StateID),
/// Reset the given `slot` to the given `offset` (which might be `None`).
RestoreCapture { slot: SmallIndex, offset: Option<NonMaxUsize> },
}
/// A set of counters that "instruments" a PikeVM search. To enable this, you
/// must enable the 'internal-instrument-pikevm' feature. Then run your Rust
/// program with RUST_LOG=regex_automata::nfa::thompson::pikevm=trace set in
/// the environment. The metrics collected will be dumped automatically for
/// every search executed by the PikeVM.
///
/// NOTE: When 'internal-instrument-pikevm' is enabled, it will likely cause an
/// absolute decrease in wall-clock performance, even if the 'trace' log level
/// isn't enabled. (Although, we do try to avoid extra costs when 'trace' isn't
/// enabled.) The main point of instrumentation is to get counts of various
/// events that occur during the PikeVM's execution.
///
/// This is a somewhat hacked together collection of metrics that are useful
/// to gather from a PikeVM search. In particular, it lets us scrutinize the
/// performance profile of a search beyond what general purpose profiling tools
/// give us. Namely, we orient the profiling data around the specific states of
/// the NFA.
///
/// In other words, this lets us see which parts of the NFA graph are most
/// frequently activated. This then provides direction for optimization
/// opportunities.
///
/// The really sad part about this is that it absolutely clutters up the PikeVM
/// implementation. :'( Another approach would be to just manually add this
/// code in whenever I want this kind of profiling data, but it's complicated
/// and tedious enough that I went with this approach... for now.
///
/// When instrumentation is enabled (which also turns on 'logging'), then a
/// `Counters` is initialized for every search and `trace`'d just before the
/// search returns to the caller.
///
/// Tip: When debugging performance problems with the PikeVM, it's best to try
/// to work with an NFA that is as small as possible. Otherwise the state graph
/// is likely to be too big to digest.
#[cfg(feature = "internal-instrument-pikevm")]
#[derive(Clone, Debug)]
struct Counters {
/// The number of times the NFA is in a particular permutation of states.
state_sets: alloc::collections::BTreeMap<Vec<StateID>, u64>,
/// The number of times 'step' is called for a particular state ID (which
/// indexes this array).
steps: Vec<u64>,
/// The number of times an epsilon closure was computed for a state.
closures: Vec<u64>,
/// The number of times a particular state ID is pushed on to a stack while
/// computing an epsilon closure.
stack_pushes: Vec<u64>,
/// The number of times a particular state ID is inserted into a sparse set
/// while computing an epsilon closure.
set_inserts: Vec<u64>,
}
#[cfg(feature = "internal-instrument-pikevm")]
impl Counters {
fn empty() -> Counters {
Counters {
state_sets: alloc::collections::BTreeMap::new(),
steps: vec![],
closures: vec![],
stack_pushes: vec![],
set_inserts: vec![],
}
}
fn reset(&mut self, nfa: &NFA) {
let len = nfa.states().len();
self.state_sets.clear();
self.steps.clear();
self.steps.resize(len, 0);
self.closures.clear();
self.closures.resize(len, 0);
self.stack_pushes.clear();
self.stack_pushes.resize(len, 0);
self.set_inserts.clear();
self.set_inserts.resize(len, 0);
}
fn eprint(&self, nfa: &NFA) {
trace!("===== START PikeVM Instrumentation Output =====");
// We take the top-K most occurring state sets. Otherwise the output
// is likely to be overwhelming. And we probably only care about the
// most frequently occurring ones anyway.
const LIMIT: usize = 20;
let mut set_counts =
self.state_sets.iter().collect::<Vec<(&Vec<StateID>, &u64)>>();
set_counts.sort_by_key(|(_, &count)| core::cmp::Reverse(count));
trace!("## PikeVM frequency of state sets (top {})", LIMIT);
for (set, count) in set_counts.iter().take(LIMIT) {
trace!("{:?}: {}", set, count);
}
if set_counts.len() > LIMIT {
trace!(
"... {} sets omitted (out of {} total)",
set_counts.len() - LIMIT,
set_counts.len(),
);
}
trace!("");
trace!("## PikeVM total frequency of events");
trace!(
"steps: {}, closures: {}, stack-pushes: {}, set-inserts: {}",
self.steps.iter().copied().sum::<u64>(),
self.closures.iter().copied().sum::<u64>(),
self.stack_pushes.iter().copied().sum::<u64>(),
self.set_inserts.iter().copied().sum::<u64>(),
);
trace!("");
trace!("## PikeVM frequency of events broken down by state");
for sid in 0..self.steps.len() {
trace!(
"{:06}: steps: {}, closures: {}, \
stack-pushes: {}, set-inserts: {}",
sid,
self.steps[sid],
self.closures[sid],
self.stack_pushes[sid],
self.set_inserts[sid],
);
}
trace!("");
trace!("## NFA debug display");
trace!("{:?}", nfa);
trace!("===== END PikeVM Instrumentation Output =====");
}
fn record_state_set(&mut self, set: &SparseSet) {
let set = set.iter().collect::<Vec<StateID>>();
*self.state_sets.entry(set).or_insert(0) += 1;
}
fn record_step(&mut self, sid: StateID) {
self.steps[sid] += 1;
}
fn record_closure(&mut self, sid: StateID) {
self.closures[sid] += 1;
}
fn record_stack_push(&mut self, sid: StateID) {
self.stack_pushes[sid] += 1;
}
fn record_set_insert(&mut self, sid: StateID) {
self.set_inserts[sid] += 1;
}
}