Source code
Revision control
Copy as Markdown
Other Tools
use crate::{engine::Engine, DecodeError, PAD_BYTE};
use std::{cmp, fmt, io};
// This should be large, but it has to fit on the stack.
pub(crate) const BUF_SIZE: usize = 1024;
// 4 bytes of base64 data encode 3 bytes of raw data (modulo padding).
const BASE64_CHUNK_SIZE: usize = 4;
const DECODED_CHUNK_SIZE: usize = 3;
/// A `Read` implementation that decodes base64 data read from an underlying reader.
///
/// # Examples
///
/// ```
/// use std::io::Read;
/// use std::io::Cursor;
/// use base64::engine::general_purpose;
///
/// // use a cursor as the simplest possible `Read` -- in real code this is probably a file, etc.
/// let mut wrapped_reader = Cursor::new(b"YXNkZg==");
/// let mut decoder = base64::read::DecoderReader::new(
/// &mut wrapped_reader,
/// &general_purpose::STANDARD);
///
/// // handle errors as you normally would
/// let mut result = Vec::new();
/// decoder.read_to_end(&mut result).unwrap();
///
/// assert_eq!(b"asdf", &result[..]);
///
/// ```
pub struct DecoderReader<'e, E: Engine, R: io::Read> {
engine: &'e E,
/// Where b64 data is read from
inner: R,
// Holds b64 data read from the delegate reader.
b64_buffer: [u8; BUF_SIZE],
// The start of the pending buffered data in b64_buffer.
b64_offset: usize,
// The amount of buffered b64 data.
b64_len: usize,
// Since the caller may provide us with a buffer of size 1 or 2 that's too small to copy a
// decoded chunk in to, we have to be able to hang on to a few decoded bytes.
// Technically we only need to hold 2 bytes but then we'd need a separate temporary buffer to
// decode 3 bytes into and then juggle copying one byte into the provided read buf and the rest
// into here, which seems like a lot of complexity for 1 extra byte of storage.
decoded_buffer: [u8; DECODED_CHUNK_SIZE],
// index of start of decoded data
decoded_offset: usize,
// length of decoded data
decoded_len: usize,
// used to provide accurate offsets in errors
total_b64_decoded: usize,
// offset of previously seen padding, if any
padding_offset: Option<usize>,
}
impl<'e, E: Engine, R: io::Read> fmt::Debug for DecoderReader<'e, E, R> {
fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
f.debug_struct("DecoderReader")
.field("b64_offset", &self.b64_offset)
.field("b64_len", &self.b64_len)
.field("decoded_buffer", &self.decoded_buffer)
.field("decoded_offset", &self.decoded_offset)
.field("decoded_len", &self.decoded_len)
.field("total_b64_decoded", &self.total_b64_decoded)
.field("padding_offset", &self.padding_offset)
.finish()
}
}
impl<'e, E: Engine, R: io::Read> DecoderReader<'e, E, R> {
/// Create a new decoder that will read from the provided reader `r`.
pub fn new(reader: R, engine: &'e E) -> Self {
DecoderReader {
engine,
inner: reader,
b64_buffer: [0; BUF_SIZE],
b64_offset: 0,
b64_len: 0,
decoded_buffer: [0; DECODED_CHUNK_SIZE],
decoded_offset: 0,
decoded_len: 0,
total_b64_decoded: 0,
padding_offset: None,
}
}
/// Write as much as possible of the decoded buffer into the target buffer.
/// Must only be called when there is something to write and space to write into.
/// Returns a Result with the number of (decoded) bytes copied.
fn flush_decoded_buf(&mut self, buf: &mut [u8]) -> io::Result<usize> {
debug_assert!(self.decoded_len > 0);
debug_assert!(!buf.is_empty());
let copy_len = cmp::min(self.decoded_len, buf.len());
debug_assert!(copy_len > 0);
debug_assert!(copy_len <= self.decoded_len);
buf[..copy_len].copy_from_slice(
&self.decoded_buffer[self.decoded_offset..self.decoded_offset + copy_len],
);
self.decoded_offset += copy_len;
self.decoded_len -= copy_len;
debug_assert!(self.decoded_len < DECODED_CHUNK_SIZE);
Ok(copy_len)
}
/// Read into the remaining space in the buffer after the current contents.
/// Must only be called when there is space to read into in the buffer.
/// Returns the number of bytes read.
fn read_from_delegate(&mut self) -> io::Result<usize> {
debug_assert!(self.b64_offset + self.b64_len < BUF_SIZE);
let read = self
.inner
.read(&mut self.b64_buffer[self.b64_offset + self.b64_len..])?;
self.b64_len += read;
debug_assert!(self.b64_offset + self.b64_len <= BUF_SIZE);
Ok(read)
}
/// Decode the requested number of bytes from the b64 buffer into the provided buffer. It's the
/// caller's responsibility to choose the number of b64 bytes to decode correctly.
///
/// Returns a Result with the number of decoded bytes written to `buf`.
fn decode_to_buf(&mut self, b64_len_to_decode: usize, buf: &mut [u8]) -> io::Result<usize> {
debug_assert!(self.b64_len >= b64_len_to_decode);
debug_assert!(self.b64_offset + self.b64_len <= BUF_SIZE);
debug_assert!(!buf.is_empty());
let b64_to_decode = &self.b64_buffer[self.b64_offset..self.b64_offset + b64_len_to_decode];
let decode_metadata = self
.engine
.internal_decode(
b64_to_decode,
buf,
self.engine.internal_decoded_len_estimate(b64_len_to_decode),
)
.map_err(|e| match e {
DecodeError::InvalidByte(offset, byte) => {
// This can be incorrect, but not in a way that probably matters to anyone:
// if there was padding handled in a previous decode, and we are now getting
// InvalidByte due to more padding, we should arguably report InvalidByte with
// PAD_BYTE at the original padding position (`self.padding_offset`), but we
// don't have a good way to tie those two cases together, so instead we
// just report the invalid byte as if the previous padding, and its possibly
// related downgrade to a now invalid byte, didn't happen.
DecodeError::InvalidByte(self.total_b64_decoded + offset, byte)
}
DecodeError::InvalidLength => DecodeError::InvalidLength,
DecodeError::InvalidLastSymbol(offset, byte) => {
DecodeError::InvalidLastSymbol(self.total_b64_decoded + offset, byte)
}
DecodeError::InvalidPadding => DecodeError::InvalidPadding,
})
.map_err(|e| io::Error::new(io::ErrorKind::InvalidData, e))?;
if let Some(offset) = self.padding_offset {
// we've already seen padding
if decode_metadata.decoded_len > 0 {
// we read more after already finding padding; report error at first padding byte
return Err(io::Error::new(
io::ErrorKind::InvalidData,
DecodeError::InvalidByte(offset, PAD_BYTE),
));
}
}
self.padding_offset = self.padding_offset.or(decode_metadata
.padding_offset
.map(|offset| self.total_b64_decoded + offset));
self.total_b64_decoded += b64_len_to_decode;
self.b64_offset += b64_len_to_decode;
self.b64_len -= b64_len_to_decode;
debug_assert!(self.b64_offset + self.b64_len <= BUF_SIZE);
Ok(decode_metadata.decoded_len)
}
/// Unwraps this `DecoderReader`, returning the base reader which it reads base64 encoded
/// input from.
///
/// Because `DecoderReader` performs internal buffering, the state of the inner reader is
/// unspecified. This function is mainly provided because the inner reader type may provide
/// additional functionality beyond the `Read` implementation which may still be useful.
pub fn into_inner(self) -> R {
self.inner
}
}
impl<'e, E: Engine, R: io::Read> io::Read for DecoderReader<'e, E, R> {
/// Decode input from the wrapped reader.
///
/// Under non-error circumstances, this returns `Ok` with the value being the number of bytes
/// written in `buf`.
///
/// Where possible, this function buffers base64 to minimize the number of read() calls to the
/// delegate reader.
///
/// # Errors
///
/// Any errors emitted by the delegate reader are returned. Decoding errors due to invalid
/// base64 are also possible, and will have `io::ErrorKind::InvalidData`.
fn read(&mut self, buf: &mut [u8]) -> io::Result<usize> {
if buf.is_empty() {
return Ok(0);
}
// offset == BUF_SIZE when we copied it all last time
debug_assert!(self.b64_offset <= BUF_SIZE);
debug_assert!(self.b64_offset + self.b64_len <= BUF_SIZE);
debug_assert!(if self.b64_offset == BUF_SIZE {
self.b64_len == 0
} else {
self.b64_len <= BUF_SIZE
});
debug_assert!(if self.decoded_len == 0 {
// can be = when we were able to copy the complete chunk
self.decoded_offset <= DECODED_CHUNK_SIZE
} else {
self.decoded_offset < DECODED_CHUNK_SIZE
});
// We shouldn't ever decode into decoded_buffer when we can't immediately write at least one
// byte into the provided buf, so the effective length should only be 3 momentarily between
// when we decode and when we copy into the target buffer.
debug_assert!(self.decoded_len < DECODED_CHUNK_SIZE);
debug_assert!(self.decoded_len + self.decoded_offset <= DECODED_CHUNK_SIZE);
if self.decoded_len > 0 {
// we have a few leftover decoded bytes; flush that rather than pull in more b64
self.flush_decoded_buf(buf)
} else {
let mut at_eof = false;
while self.b64_len < BASE64_CHUNK_SIZE {
// Copy any bytes we have to the start of the buffer.
self.b64_buffer
.copy_within(self.b64_offset..self.b64_offset + self.b64_len, 0);
self.b64_offset = 0;
// then fill in more data
let read = self.read_from_delegate()?;
if read == 0 {
// we never read into an empty buf, so 0 => we've hit EOF
at_eof = true;
break;
}
}
if self.b64_len == 0 {
debug_assert!(at_eof);
// we must be at EOF, and we have no data left to decode
return Ok(0);
};
debug_assert!(if at_eof {
// if we are at eof, we may not have a complete chunk
self.b64_len > 0
} else {
// otherwise, we must have at least one chunk
self.b64_len >= BASE64_CHUNK_SIZE
});
debug_assert_eq!(0, self.decoded_len);
if buf.len() < DECODED_CHUNK_SIZE {
// caller requested an annoyingly short read
// have to write to a tmp buf first to avoid double mutable borrow
let mut decoded_chunk = [0_u8; DECODED_CHUNK_SIZE];
// if we are at eof, could have less than BASE64_CHUNK_SIZE, in which case we have
// to assume that these last few tokens are, in fact, valid (i.e. must be 2-4 b64
// tokens, not 1, since 1 token can't decode to 1 byte).
let to_decode = cmp::min(self.b64_len, BASE64_CHUNK_SIZE);
let decoded = self.decode_to_buf(to_decode, &mut decoded_chunk[..])?;
self.decoded_buffer[..decoded].copy_from_slice(&decoded_chunk[..decoded]);
self.decoded_offset = 0;
self.decoded_len = decoded;
// can be less than 3 on last block due to padding
debug_assert!(decoded <= 3);
self.flush_decoded_buf(buf)
} else {
let b64_bytes_that_can_decode_into_buf = (buf.len() / DECODED_CHUNK_SIZE)
.checked_mul(BASE64_CHUNK_SIZE)
.expect("too many chunks");
debug_assert!(b64_bytes_that_can_decode_into_buf >= BASE64_CHUNK_SIZE);
let b64_bytes_available_to_decode = if at_eof {
self.b64_len
} else {
// only use complete chunks
self.b64_len - self.b64_len % 4
};
let actual_decode_len = cmp::min(
b64_bytes_that_can_decode_into_buf,
b64_bytes_available_to_decode,
);
self.decode_to_buf(actual_decode_len, buf)
}
}
}
}