Source code

Revision control

Copy as Markdown

Other Tools

#! /bin/bash
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
########################################################################
#
# mozilla/security/nss/tests/iopr/ocsp_iopr.sh
#
# NSS SSL interoperability QA. This file is included from ssl.sh
#
# needs to work on all Unix and Windows platforms
#
# special strings
# ---------------
# FIXME ... known problems, search for this string
# NOTE .... unexpected behavior
########################################################################
IOPR_OCSP_SOURCED=1
########################################################################
# The funtion works with variables defined in interoperability
# configuration file that gets downloaded from a webserver.
# The function sets test parameters defind for a particular type
# of testing.
#
# No return value
#
setTestParam() {
type=$1
testParam=`eval 'echo $'${type}Param`
testDescription=`eval 'echo $'${type}Descr`
testProto=`eval 'echo $'${type}Proto`
testPort=`eval 'echo $'${type}Port`
testResponder=`eval 'echo $'${type}ResponderCert`
testValidCertNames=`eval 'echo $'${type}ValidCertNames`
testRevokedCertNames=`eval 'echo $'${type}RevokedCertNames`
testStatUnknownCertNames=`eval 'echo $'${type}StatUnknownCertNames`
}
########################################################################
# The funtion checks status of a cert using ocspclnt.
# Params:
# dbDir - nss cert db location
# cert - cert in question
# respUrl - responder url is available
# defRespCert - trusted responder cert
#
# Return values:
# 0 - test passed, 1 - otherwise.
#
ocsp_get_cert_status() {
dbDir=$1
cert=$2
respUrl=$3
defRespCert=$4
if [ -n "$respUrl" -o -n "$defRespCert" ]; then
if [ -z "$respUrl" -o -z "$defRespCert" ]; then
html_failed "Incorrect test params"
return 1
fi
clntParam="-l $respUrl -t $defRespCert"
fi
if [ -z "${MEMLEAK_DBG}" ]; then
outFile=$dbDir/ocsptest.out.$$
echo "ocspclnt -d $dbDir -S $cert $clntParam"
${BINDIR}/ocspclnt -d $dbDir -S $cert $clntParam >$outFile 2>&1
ret=$?
echo "ocspclnt output:"
cat $outFile
[ -z "`grep succeeded $outFile`" ] && ret=1
rm -f $outFile
return $ret
fi
OCSP_ATTR="-d $dbDir -S $cert $clntParam"
${RUN_COMMAND_DBG} ${BINDIR}/ocspclnt ${OCSP_ATTR}
}
########################################################################
# The funtion checks status of a cert using ocspclnt.
# Params:
# testType - type of the test based on type of used responder
# servName - FQDM of the responder server
# dbDir - nss cert db location
#
# No return value
#
ocsp_iopr() {
testType=$1
servName=$2
dbDir=$3
setTestParam $testType
if [ "`echo $testParam | grep NOCOV`" != "" ]; then
echo "SSL Cipher Coverage of WebServ($IOPR_HOSTADDR) excluded from " \
"run by server configuration"
return 0
fi
if [ -z "${MEMLEAK_DBG}" ]; then
html_head "OCSP testing with responder at $IOPR_HOSTADDR. <br>" \
"Test Type: $testDescription"
fi
if [ -n "$testResponder" ]; then
else
responderUrl=""
fi
if [ -z "${MEMLEAK_DBG}" ]; then
for certName in $testValidCertNames; do
ocsp_get_cert_status $dbDir $certName "$responderUrl" \
"$testResponder"
html_msg $? 0 "Getting status of a valid cert ($certName)" \
"produced a returncode of $ret, expected is 0."
done
for certName in $testRevokedCertNames; do
ocsp_get_cert_status $dbDir $certName "$responderUrl" \
"$testResponder"
html_msg $? 1 "Getting status of a unvalid cert ($certName)" \
"produced a returncode of $ret, expected is 1."
done
for certName in $testStatUnknownCertNames; do
ocsp_get_cert_status $dbDir $certName "$responderUrl" \
"$testResponder"
html_msg $? 1 "Getting status of a cert with unknown status " \
"($certName) produced a returncode of $ret, expected is 1."
done
else
for certName in $testValidCertNames $testRevokedCertNames \
$testStatUnknownCertName; do
ocsp_get_cert_status $dbDir $certName "$responderUrl" \
"$testResponder"
done
fi
}
#####################################################################
# Initial point for running ocsp test againt multiple hosts involved in
# interoperability testing. Called from nss/tests/ocsp/ocsp.sh
# It will only proceed with test run for a specific host if environment variable
# IOPR_HOSTADDR_LIST was set, had the host name in the list
# and all needed file were successfully downloaded and installed for the host.
#
# Returns 1 if interoperability testing is off, 0 otherwise.
#
ocsp_iopr_run() {
NO_ECC_CERTS=1 # disable ECC for interoperability tests
if [ "$IOPR" -ne 1 ]; then
return 1
fi
cd ${CLIENTDIR}
if [ -n "${MEMLEAK_DBG}" ]; then
html_head "Memory leak checking - IOPR"
fi
num=1
IOPR_HOST_PARAM=`echo "${IOPR_HOSTADDR_LIST} " | cut -f $num -d' '`
while [ "$IOPR_HOST_PARAM" ]; do
IOPR_HOSTADDR=`echo $IOPR_HOST_PARAM | cut -f 1 -d':'`
IOPR_OPEN_PORT=`echo "$IOPR_HOST_PARAM:" | cut -f 2 -d':'`
[ -z "$IOPR_OPEN_PORT" ] && IOPR_OPEN_PORT=443
. ${IOPR_CADIR}_${IOPR_HOSTADDR}/iopr_server.cfg
RES=$?
num=`expr $num + 1`
IOPR_HOST_PARAM=`echo "${IOPR_HOSTADDR_LIST} " | cut -f $num -d' '`
if [ $RES -ne 0 -o X`echo "$wsFlags" | grep NOIOPR` != X ]; then
continue
fi
#=======================================================
# Check what server is configured to run ssl tests
#
[ -z "`echo ${supportedTests_new} | grep -i ocsp`" ] && continue;
# Testing directories defined by webserver.
if [ -n "${MEMLEAK_DBG}" ]; then
LOGNAME=iopr-${IOPR_HOSTADDR}
LOGFILE=${LOGDIR}/${LOGNAME}.log
fi
# Testing directories defined by webserver.
echo "Testing ocsp interoperability.
Client: local(tstclnt).
Responder: remote($IOPR_HOSTADDR)"
for ocspTestType in ${supportedTests_new}; do
if [ -z "`echo $ocspTestType | grep -i ocsp`" ]; then
continue
fi
if [ -n "${MEMLEAK_DBG}" ]; then
ocsp_iopr $ocspTestType ${IOPR_HOSTADDR} \
${IOPR_OCSP_CLIENTDIR}_${IOPR_HOSTADDR} 2>> ${LOGFILE}
else
ocsp_iopr $ocspTestType ${IOPR_HOSTADDR} \
${IOPR_OCSP_CLIENTDIR}_${IOPR_HOSTADDR}
fi
done
if [ -n "${MEMLEAK_DBG}" ]; then
log_parse
ret=$?
html_msg ${ret} 0 "${LOGNAME}" \
"produced a returncode of $ret, expected is 0"
fi
echo "================================================"
echo "Done testing ocsp interoperability with $IOPR_HOSTADDR"
done
if [ -n "${MEMLEAK_DBG}" ]; then
html "</TABLE><BR>"
fi
NO_ECC_CERTS=0
return 0
}