Source code
Revision control
Copy as Markdown
Other Tools
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
#include "nsISupports.idl"
#include "nsIVariant.idl"
/**
* Callback type used to notify callers that an operation performed by
* nsICertStorage has completed. Indicates the result of the requested
* operation, as well as any data returned by the operation.
*/
[scriptable, function, uuid(3f8fe26a-a436-4ad4-9c1c-a53c60973c31)]
interface nsICertStorageCallback : nsISupports {
[must_use]
void done(in nsresult rv, in nsIVariant result);
};
/**
* A base interface for representing the revocation state of a certificate.
* Implementing this interface by itself is insufficient; your type must
* implement an inheriting interface that specifies the certificate by issuer
* and serial number or by subject and public key hash.
* Set state to nsICertStorage.STATE_UNSET to mark the certificate as not revoked.
* Set state to nsICertStorage.STATE_ENFORCE to mark the certificate as revoked.
*/
[scriptable, uuid(96db6fd7-6b64-4a5a-955d-310bd9ca4234)]
interface nsIRevocationState : nsISupports {
readonly attribute short state;
};
/**
* An interface representing the revocation state of a certificate by issuer
* and serial number. Both issuer name and serial number are base64-encoded.
*/
[scriptable, uuid(23ce3546-f1b9-46f6-8de3-77704da5702f)]
interface nsIIssuerAndSerialRevocationState : nsIRevocationState {
readonly attribute ACString issuer;
readonly attribute ACString serial;
};
/**
* An interface representing the revocation state of a certificate by subject
* and pub key hash (the hash algorithm should be SHA-256). Both subject name
* and public key hash are base64-encoded.
*/
[scriptable, uuid(e78b51b4-6fa4-41e2-92ce-e9404f541e96)]
interface nsISubjectAndPubKeyRevocationState : nsIRevocationState {
readonly attribute ACString subject;
readonly attribute ACString pubKey;
};
/**
* An interface representing a set of certificates that are covered by a CRLite
* filter. The set is represented by a certificate transparency log ID and a
* pair of timestamps. The timestamps are such that the CRLite aggregator has
* seen every certificate from the specified log with an SCT between the two
* timestamps.
* b64LogID is a base 64-encoded RFC 6962 LogID.
* minTimestamp is the smallest timestamp that the CRLite filter covers.
* maxTimestamp is the largest timestamp that the CRLite filter covers.
*/
[scriptable, uuid(416453f7-29bd-4820-a039-9c2e055d3715)]
interface nsICRLiteCoverage : nsISupports {
readonly attribute ACString b64LogID;
readonly attribute unsigned long long minTimestamp;
readonly attribute unsigned long long maxTimestamp;
};
/**
* An interface representing the id and timestamp fields from an RFC 6962
* SignedCertificateTimestamp struct.
* logID is the id field.
* timestamp is the timestamp field.
*/
[uuid(9676cfc4-6e84-11ec-a30d-d3cd0af86e01)]
interface nsICRLiteTimestamp: nsISupports {
readonly attribute Array<octet> logID;
readonly attribute unsigned long long timestamp;
};
/**
* An interface representing a certificate to add to storage. Consists of the
* base64-encoded DER bytes of the certificate (cert), the base64-encoded DER
* bytes of the subject distinguished name of the certificate (subject), and the
* trust of the certificate (one of the nsICertStorage.TRUST_* constants).
* (Note that this implementation does not validate that the given subject DN
* actually matches the subject DN of the certificate, nor that the given cert
* is a valid DER X.509 certificate.)
*/
[scriptable, uuid(27b66f5e-0faf-403b-95b4-bc11691ac50d)]
interface nsICertInfo : nsISupports {
readonly attribute ACString cert;
readonly attribute ACString subject;
readonly attribute short trust;
};
[scriptable, uuid(327100a7-3401-45ef-b160-bf880f1016fd)]
interface nsICertStorage : nsISupports {
const octet DATA_TYPE_REVOCATION = 1;
const octet DATA_TYPE_CERTIFICATE = 2;
const octet DATA_TYPE_CRLITE = 3;
const octet DATA_TYPE_CRLITE_FILTER_FULL = 4;
const octet DATA_TYPE_CRLITE_FILTER_INCREMENTAL = 5;
/**
* Asynchronously check if the backing storage has stored data of the given
* type in the past. This is useful if the backing storage may have had to
* moving from a 32-bit binary to a 64-bit binary caused the DB to become
* unreadable, thus necessitating its deletion and recreation).
*/
[must_use]
void hasPriorData(in octet type, in nsICertStorageCallback callback);
const short STATE_UNSET = 0;
const short STATE_ENFORCE = 1;
const short STATE_NOT_ENROLLED = 2;
const short STATE_NOT_COVERED = 3;
const short STATE_NO_FILTER = 4;
/**
* Asynchronously set the revocation states of a set of certificates.
* The given callback is called with the result of the operation when it
* completes.
* Must only be called from the main thread.
*/
[must_use]
void setRevocations(in Array<nsIRevocationState> revocations,
in nsICertStorageCallback callback);
/**
* Get the revocation state of a certificate. STATE_UNSET indicates the
* certificate is not revoked. STATE_ENFORCE indicates the certificate is
* revoked.
* issuer - issuer name, DER encoded
* serial - serial number, DER encoded
* subject - subject name, DER encoded
* pubkey - public key, DER encoded
* xpcshell tests may call this from the main thread.
*/
[must_use]
short getRevocationState(in Array<octet> issuer,
in Array<octet> serial,
in Array<octet> subject,
in Array<octet> pubkey);
/**
* Given the contents of a new CRLite filter, a list containing
* `base64(sha256(subject DN || subject SPKI))` for each enrolled issuer, and
* the filter's timestamp coverage, replaces any existing filter with the new
* one. Also clears any previously-set incremental revocation updates
* ("stashes").
*/
[must_use]
void setFullCRLiteFilter(in Array<octet> filter,
in Array<ACString> enrolledIssuers,
in Array<nsICRLiteCoverage> coverage,
in nsICertStorageCallback callback);
/**
* Given the DER-encoded issuer distinguished name, DER-encoded issuer subject public key info,
* the bytes of the value of the serial number (so, not including the DER tag and length) of a
* certificate, and the timestamps from that certificate's embedded SCTs, returns the result of
* looking up the corresponding entry in the currently-saved CRLite filter (if any).
* Returns
* - STATE_ENFORCE if the lookup indicates the certificate is revoked via CRLite,
* - STATE_UNSET if the lookup indicates the certificate is not revoked via CRLite,
* - STATE_NOT_ENROLLED if the issuer is not enrolled in CRLite, or
* - STATE_NOT_COVERED if the issuer is enrolled but the provided timestamps indicate
* that the serial number is not covered by the current CRLite filter.
* - STATE_NO_FILTER if there is no (usable) CRLite filter.
* No lookup is performed in the STATE_NOT_ENROLLED and STATE_NOT_COVERED cases.
*/
[must_use, noscript]
short getCRLiteRevocationState(in Array<octet> issuer,
in Array<octet> issuerSPKI,
in Array<octet> serialNumber,
in Array<nsICRLiteTimestamp> timestamps);
/**
* Given the contents of a CRLite incremental revocation update ("stash"), adds the revocation
* information to the current set of stashed revocations. The basic unit of the stash file is an
* issuer subject public key info hash (sha-256) followed by a number of serial numbers
* corresponding to revoked certificates issued by that issuer. More specifically, each unit
* consists of:
* 4 bytes little-endian: the number of serial numbers following the issuer spki hash
* 1 byte: the length of the issuer spki hash
* issuer spki hash length bytes: the issuer spki hash
* as many times as the indicated serial numbers:
* 1 byte: the length of the serial number
* serial number length bytes: the serial number
* The stash file consists of any number of these units concatenated together.
*/
[must_use]
void addCRLiteStash(in Array<octet> stash, in nsICertStorageCallback callback);
/**
* Given a DER-encoded issuer subject public key info and the bytes of the value of the serial
* number (so, not including the DER tag and length), determines if the certificate identified by
* this issuer SPKI and serial number is revoked according to the current set of stashed CRLite
* revocation information.
*/
[must_use, noscript]
boolean isCertRevokedByStash(in Array<octet> issuerSPKI, in Array<octet> serialNumber);
/**
* Trust flags to use when adding a adding a certificate.
* TRUST_INHERIT indicates a certificate inherits trust from another
* certificate.
* TRUST_ANCHOR indicates the certificate is a root of trust.
*/
const short TRUST_INHERIT = 0;
const short TRUST_ANCHOR = 1;
/**
* Asynchronously add a list of certificates to the backing storage.
* See the documentation for nsICertInfo.
* The given callback is called with the result of the operation when it
* completes.
* Must only be called from the main thread.
*/
[must_use]
void addCerts(in Array<nsICertInfo> certs, in nsICertStorageCallback callback);
/**
* Asynchronously remove the certificates with the given sha-256 hashes from
* the backing storage.
* hashes is an array of base64-encoded bytes of the sha-256 hashes of each
* certificate's bytes (DER-encoded).
* The given callback is called with the result of the operation when it
* completes.
* Must only be called from the main thread.
*/
[must_use]
void removeCertsByHashes(in Array<ACString> hashes,
in nsICertStorageCallback callback);
/**
* Find all certificates in the backing storage with the given subject
* distinguished name.
* subject is the DER-encoded bytes of the subject distinguished name.
* Returns an array of arrays of bytes, where each inner array corresponds to
* the DER-encoded bytes of a certificate that has the given subject (although
* as these certificates were presumably added via addCertBySubject, this
* aspect is never actually valided by nsICertStorage).
*/
[must_use]
Array<Array<octet> > findCertsBySubject(in Array<octet> subject);
/**
* Get the count of remaining async operations. Called to ensure we don't skip
* or interrupt any operations during fast shutdown.
* Must only be called from the main thread.
*/
[must_use]
int32_t GetRemainingOperationCount();
};