firefox-main/third_party/rust/read-fonts/generated/generated_variations.rs

Source code

Revision control

Copy as Markdown

Other Tools

// THIS FILE IS AUTOGENERATED.
// Any changes to this file will be overwritten.
// For more information about how codegen works, see font-codegen/README.md
#[allow(unused_imports)]
use crate::codegen_prelude::*;
impl<'a> MinByteRange<'a> for TupleVariationHeader<'a> {
fn min_byte_range(&self) -> Range<usize> {
0..self.intermediate_end_tuple_byte_range().end
}
fn min_table_bytes(&self) -> &'a [u8] {
let range = self.min_byte_range();
self.data.as_bytes().get(range).unwrap_or_default()
}
}
impl ReadArgs for TupleVariationHeader<'_> {
type Args = u16;
}
impl<'a> FontReadWithArgs<'a> for TupleVariationHeader<'a> {
fn read_with_args(data: FontData<'a>, args: &u16) -> Result<Self, ReadError> {
let axis_count = *args;
#[allow(clippy::absurd_extreme_comparisons)]
if data.len() < Self::MIN_SIZE {
return Err(ReadError::OutOfBounds);
}
Ok(Self { data, axis_count })
}
}
impl<'a> TupleVariationHeader<'a> {
/// A constructor that requires additional arguments.
///
/// This type requires some external state in order to be
/// parsed.
pub fn read(data: FontData<'a>, axis_count: u16) -> Result<Self, ReadError> {
let args = axis_count;
Self::read_with_args(data, &args)
}
}
#[derive(Clone)]
pub struct TupleVariationHeader<'a> {
data: FontData<'a>,
axis_count: u16,
}
#[allow(clippy::needless_lifetimes)]
impl<'a> TupleVariationHeader<'a> {
pub const MIN_SIZE: usize = (u16::RAW_BYTE_LEN + TupleIndex::RAW_BYTE_LEN);
basic_table_impls!(impl_the_methods);
/// The size in bytes of the serialized data for this tuple
/// variation table.
pub fn variation_data_size(&self) -> u16 {
let range = self.variation_data_size_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// A packed field. The high 4 bits are flags (see below). The low
/// 12 bits are an index into a shared tuple records array.
pub fn tuple_index(&self) -> TupleIndex {
let range = self.tuple_index_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
pub(crate) fn axis_count(&self) -> u16 {
self.axis_count
}
pub fn variation_data_size_byte_range(&self) -> Range<usize> {
let start = 0;
let end = start + u16::RAW_BYTE_LEN;
start..end
}
pub fn tuple_index_byte_range(&self) -> Range<usize> {
let start = self.variation_data_size_byte_range().end;
let end = start + TupleIndex::RAW_BYTE_LEN;
start..end
}
pub fn peak_tuple_byte_range(&self) -> Range<usize> {
let tuple_index = self.tuple_index();
let axis_count = self.axis_count();
let start = self.tuple_index_byte_range().end;
let end = start
+ (TupleIndex::tuple_len(tuple_index, axis_count, 0_usize))
.saturating_mul(F2Dot14::RAW_BYTE_LEN);
start..end
}
pub fn intermediate_start_tuple_byte_range(&self) -> Range<usize> {
let tuple_index = self.tuple_index();
let axis_count = self.axis_count();
let start = self.peak_tuple_byte_range().end;
let end = start
+ (TupleIndex::tuple_len(tuple_index, axis_count, 1_usize))
.saturating_mul(F2Dot14::RAW_BYTE_LEN);
start..end
}
pub fn intermediate_end_tuple_byte_range(&self) -> Range<usize> {
let tuple_index = self.tuple_index();
let axis_count = self.axis_count();
let start = self.intermediate_start_tuple_byte_range().end;
let end = start
+ (TupleIndex::tuple_len(tuple_index, axis_count, 1_usize))
.saturating_mul(F2Dot14::RAW_BYTE_LEN);
start..end
}
}
const _: () = assert!(FontData::default_data_long_enough(
TupleVariationHeader::MIN_SIZE
));
impl Default for TupleVariationHeader<'_> {
fn default() -> Self {
Self {
data: FontData::default_table_data(),
axis_count: Default::default(),
}
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for TupleVariationHeader<'a> {
fn type_name(&self) -> &str {
"TupleVariationHeader"
}
fn get_field(&self, idx: usize) -> Option<Field<'a>> {
match idx {
0usize => Some(Field::new(
"variation_data_size",
self.variation_data_size(),
)),
1usize => Some(Field::new("tuple_index", self.traverse_tuple_index())),
_ => None,
}
}
}
#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for TupleVariationHeader<'a> {
fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
(self as &dyn SomeTable<'a>).fmt(f)
}
}
///
/// The tuple variation store formats reference regions within the font’s
/// variation space using tuple records. A tuple record identifies a position
/// in terms of normalized coordinates, which use F2DOT14 values.
#[derive(Clone, Debug, PartialEq, Eq, PartialOrd, Ord, Hash)]
pub struct Tuple<'a> {
/// Coordinate array specifying a position within the font’s variation space.
///
/// The number of elements must match the axisCount specified in the
/// 'fvar' table.
pub values: &'a [BigEndian<F2Dot14>],
}
impl<'a> Tuple<'a> {
/// Coordinate array specifying a position within the font’s variation space.
///
/// The number of elements must match the axisCount specified in the
/// 'fvar' table.
pub fn values(&self) -> &'a [BigEndian<F2Dot14>] {
self.values
}
}
impl ReadArgs for Tuple<'_> {
type Args = u16;
}
impl ComputeSize for Tuple<'_> {
#[allow(clippy::needless_question_mark)]
fn compute_size(args: &u16) -> Result<usize, ReadError> {
let axis_count = *args;
Ok((transforms::to_usize(axis_count)).saturating_mul(F2Dot14::RAW_BYTE_LEN))
}
}
impl<'a> FontReadWithArgs<'a> for Tuple<'a> {
fn read_with_args(data: FontData<'a>, args: &u16) -> Result<Self, ReadError> {
let mut cursor = data.cursor();
let axis_count = *args;
Ok(Self {
values: cursor.read_array(transforms::to_usize(axis_count))?,
})
}
}
#[allow(clippy::needless_lifetimes)]
impl<'a> Tuple<'a> {
/// A constructor that requires additional arguments.
///
/// This type requires some external state in order to be
/// parsed.
pub fn read(data: FontData<'a>, axis_count: u16) -> Result<Self, ReadError> {
let args = axis_count;
Self::read_with_args(data, &args)
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> SomeRecord<'a> for Tuple<'a> {
fn traverse(self, data: FontData<'a>) -> RecordResolver<'a> {
RecordResolver {
name: "Tuple",
get_field: Box::new(move |idx, _data| match idx {
0usize => Some(Field::new("values", self.values())),
_ => None,
}),
data,
}
}
}
impl Format<u8> for DeltaSetIndexMapFormat0<'_> {
const FORMAT: u8 = 0;
}
impl<'a> MinByteRange<'a> for DeltaSetIndexMapFormat0<'a> {
fn min_byte_range(&self) -> Range<usize> {
0..self.map_data_byte_range().end
}
fn min_table_bytes(&self) -> &'a [u8] {
let range = self.min_byte_range();
self.data.as_bytes().get(range).unwrap_or_default()
}
}
impl<'a> FontRead<'a> for DeltaSetIndexMapFormat0<'a> {
fn read(data: FontData<'a>) -> Result<Self, ReadError> {
#[allow(clippy::absurd_extreme_comparisons)]
if data.len() < Self::MIN_SIZE {
return Err(ReadError::OutOfBounds);
}
Ok(Self { data })
}
}
#[derive(Clone)]
pub struct DeltaSetIndexMapFormat0<'a> {
data: FontData<'a>,
}
#[allow(clippy::needless_lifetimes)]
impl<'a> DeltaSetIndexMapFormat0<'a> {
pub const MIN_SIZE: usize = (u8::RAW_BYTE_LEN + EntryFormat::RAW_BYTE_LEN + u16::RAW_BYTE_LEN);
basic_table_impls!(impl_the_methods);
/// DeltaSetIndexMap format: set to 0.
pub fn format(&self) -> u8 {
let range = self.format_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// A packed field that describes the compressed representation of
/// delta-set indices. See details below.
pub fn entry_format(&self) -> EntryFormat {
let range = self.entry_format_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// The number of mapping entries.
pub fn map_count(&self) -> u16 {
let range = self.map_count_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// The delta-set index mapping data. See details below.
pub fn map_data(&self) -> &'a [u8] {
let range = self.map_data_byte_range();
self.data.read_array(range).ok().unwrap_or_default()
}
pub fn format_byte_range(&self) -> Range<usize> {
let start = 0;
let end = start + u8::RAW_BYTE_LEN;
start..end
}
pub fn entry_format_byte_range(&self) -> Range<usize> {
let start = self.format_byte_range().end;
let end = start + EntryFormat::RAW_BYTE_LEN;
start..end
}
pub fn map_count_byte_range(&self) -> Range<usize> {
let start = self.entry_format_byte_range().end;
let end = start + u16::RAW_BYTE_LEN;
start..end
}
pub fn map_data_byte_range(&self) -> Range<usize> {
let entry_format = self.entry_format();
let map_count = self.map_count();
let start = self.map_count_byte_range().end;
let end = start
+ (EntryFormat::map_size(entry_format, map_count)).saturating_mul(u8::RAW_BYTE_LEN);
start..end
}
}
const _: () = assert!(FontData::default_data_long_enough(
DeltaSetIndexMapFormat0::MIN_SIZE
));
impl Default for DeltaSetIndexMapFormat0<'_> {
fn default() -> Self {
Self {
data: FontData::default_table_data(),
}
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for DeltaSetIndexMapFormat0<'a> {
fn type_name(&self) -> &str {
"DeltaSetIndexMapFormat0"
}
fn get_field(&self, idx: usize) -> Option<Field<'a>> {
match idx {
0usize => Some(Field::new("format", self.format())),
1usize => Some(Field::new("entry_format", self.entry_format())),
2usize => Some(Field::new("map_count", self.map_count())),
3usize => Some(Field::new("map_data", self.map_data())),
_ => None,
}
}
}
#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for DeltaSetIndexMapFormat0<'a> {
fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
(self as &dyn SomeTable<'a>).fmt(f)
}
}
impl Format<u8> for DeltaSetIndexMapFormat1<'_> {
const FORMAT: u8 = 1;
}
impl<'a> MinByteRange<'a> for DeltaSetIndexMapFormat1<'a> {
fn min_byte_range(&self) -> Range<usize> {
0..self.map_data_byte_range().end
}
fn min_table_bytes(&self) -> &'a [u8] {
let range = self.min_byte_range();
self.data.as_bytes().get(range).unwrap_or_default()
}
}
impl<'a> FontRead<'a> for DeltaSetIndexMapFormat1<'a> {
fn read(data: FontData<'a>) -> Result<Self, ReadError> {
#[allow(clippy::absurd_extreme_comparisons)]
if data.len() < Self::MIN_SIZE {
return Err(ReadError::OutOfBounds);
}
Ok(Self { data })
}
}
#[derive(Clone)]
pub struct DeltaSetIndexMapFormat1<'a> {
data: FontData<'a>,
}
#[allow(clippy::needless_lifetimes)]
impl<'a> DeltaSetIndexMapFormat1<'a> {
pub const MIN_SIZE: usize = (u8::RAW_BYTE_LEN + EntryFormat::RAW_BYTE_LEN + u32::RAW_BYTE_LEN);
basic_table_impls!(impl_the_methods);
/// DeltaSetIndexMap format: set to 1.
pub fn format(&self) -> u8 {
let range = self.format_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// A packed field that describes the compressed representation of
/// delta-set indices. See details below.
pub fn entry_format(&self) -> EntryFormat {
let range = self.entry_format_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// The number of mapping entries.
pub fn map_count(&self) -> u32 {
let range = self.map_count_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// The delta-set index mapping data. See details below.
pub fn map_data(&self) -> &'a [u8] {
let range = self.map_data_byte_range();
self.data.read_array(range).ok().unwrap_or_default()
}
pub fn format_byte_range(&self) -> Range<usize> {
let start = 0;
let end = start + u8::RAW_BYTE_LEN;
start..end
}
pub fn entry_format_byte_range(&self) -> Range<usize> {
let start = self.format_byte_range().end;
let end = start + EntryFormat::RAW_BYTE_LEN;
start..end
}
pub fn map_count_byte_range(&self) -> Range<usize> {
let start = self.entry_format_byte_range().end;
let end = start + u32::RAW_BYTE_LEN;
start..end
}
pub fn map_data_byte_range(&self) -> Range<usize> {
let entry_format = self.entry_format();
let map_count = self.map_count();
let start = self.map_count_byte_range().end;
let end = start
+ (EntryFormat::map_size(entry_format, map_count)).saturating_mul(u8::RAW_BYTE_LEN);
start..end
}
}
const _: () = assert!(FontData::default_data_long_enough(
DeltaSetIndexMapFormat1::MIN_SIZE
));
impl Default for DeltaSetIndexMapFormat1<'_> {
fn default() -> Self {
Self {
data: FontData::default_format_1_u8_table_data(),
}
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for DeltaSetIndexMapFormat1<'a> {
fn type_name(&self) -> &str {
"DeltaSetIndexMapFormat1"
}
fn get_field(&self, idx: usize) -> Option<Field<'a>> {
match idx {
0usize => Some(Field::new("format", self.format())),
1usize => Some(Field::new("entry_format", self.entry_format())),
2usize => Some(Field::new("map_count", self.map_count())),
3usize => Some(Field::new("map_data", self.map_data())),
_ => None,
}
}
}
#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for DeltaSetIndexMapFormat1<'a> {
fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
(self as &dyn SomeTable<'a>).fmt(f)
}
}
#[derive(Clone)]
pub enum DeltaSetIndexMap<'a> {
Format0(DeltaSetIndexMapFormat0<'a>),
Format1(DeltaSetIndexMapFormat1<'a>),
}
impl Default for DeltaSetIndexMap<'_> {
fn default() -> Self {
Self::Format0(Default::default())
}
}
impl<'a> DeltaSetIndexMap<'a> {
///Return the `FontData` used to resolve offsets for this table.
pub fn offset_data(&self) -> FontData<'a> {
match self {
Self::Format0(item) => item.offset_data(),
Self::Format1(item) => item.offset_data(),
}
}
/// DeltaSetIndexMap format: set to 0.
pub fn format(&self) -> u8 {
match self {
Self::Format0(item) => item.format(),
Self::Format1(item) => item.format(),
}
}
/// A packed field that describes the compressed representation of
/// delta-set indices. See details below.
pub fn entry_format(&self) -> EntryFormat {
match self {
Self::Format0(item) => item.entry_format(),
Self::Format1(item) => item.entry_format(),
}
}
/// The delta-set index mapping data. See details below.
pub fn map_data(&self) -> &'a [u8] {
match self {
Self::Format0(item) => item.map_data(),
Self::Format1(item) => item.map_data(),
}
}
}
impl<'a> FontRead<'a> for DeltaSetIndexMap<'a> {
fn read(data: FontData<'a>) -> Result<Self, ReadError> {
let format: u8 = data.read_at(0usize)?;
match format {
DeltaSetIndexMapFormat0::FORMAT => Ok(Self::Format0(FontRead::read(data)?)),
DeltaSetIndexMapFormat1::FORMAT => Ok(Self::Format1(FontRead::read(data)?)),
other => Err(ReadError::InvalidFormat(other.into())),
}
}
}
impl<'a> MinByteRange<'a> for DeltaSetIndexMap<'a> {
fn min_byte_range(&self) -> Range<usize> {
match self {
Self::Format0(item) => item.min_byte_range(),
Self::Format1(item) => item.min_byte_range(),
}
}
fn min_table_bytes(&self) -> &'a [u8] {
match self {
Self::Format0(item) => item.min_table_bytes(),
Self::Format1(item) => item.min_table_bytes(),
}
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> DeltaSetIndexMap<'a> {
fn dyn_inner<'b>(&'b self) -> &'b dyn SomeTable<'a> {
match self {
Self::Format0(table) => table,
Self::Format1(table) => table,
}
}
}
#[cfg(feature = "experimental_traverse")]
impl std::fmt::Debug for DeltaSetIndexMap<'_> {
fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
self.dyn_inner().fmt(f)
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for DeltaSetIndexMap<'a> {
fn type_name(&self) -> &str {
self.dyn_inner().type_name()
}
fn get_field(&self, idx: usize) -> Option<Field<'a>> {
self.dyn_inner().get_field(idx)
}
}
/// Entry format for a [DeltaSetIndexMap].
#[derive(Clone, Copy, Default, PartialEq, Eq, PartialOrd, Ord, Hash, bytemuck :: AnyBitPattern)]
#[cfg_attr(feature = "serde", derive(serde::Serialize, serde::Deserialize))]
#[repr(transparent)]
pub struct EntryFormat {
bits: u8,
}
impl EntryFormat {
/// Mask for the low 4 bits, which give the count of bits minus one that are used in each entry for the inner-level index.
pub const INNER_INDEX_BIT_COUNT_MASK: Self = Self { bits: 0x0F };
/// Mask for bits that indicate the size in bytes minus one of each entry.
pub const MAP_ENTRY_SIZE_MASK: Self = Self { bits: 0x30 };
}
impl EntryFormat {
/// Returns an empty set of flags.
#[inline]
pub const fn empty() -> Self {
Self { bits: 0 }
}
/// Returns the set containing all flags.
#[inline]
pub const fn all() -> Self {
Self {
bits: Self::INNER_INDEX_BIT_COUNT_MASK.bits | Self::MAP_ENTRY_SIZE_MASK.bits,
}
}
/// Returns the raw value of the flags currently stored.
#[inline]
pub const fn bits(&self) -> u8 {
self.bits
}
/// Convert from underlying bit representation, unless that
/// representation contains bits that do not correspond to a flag.
#[inline]
pub const fn from_bits(bits: u8) -> Option<Self> {
if (bits & !Self::all().bits()) == 0 {
Some(Self { bits })
} else {
None
}
}
/// Convert from underlying bit representation, dropping any bits
/// that do not correspond to flags.
#[inline]
pub const fn from_bits_truncate(bits: u8) -> Self {
Self {
bits: bits & Self::all().bits,
}
}
/// Returns `true` if no flags are currently stored.
#[inline]
pub const fn is_empty(&self) -> bool {
self.bits() == Self::empty().bits()
}
/// Returns `true` if there are flags common to both `self` and `other`.
#[inline]
pub const fn intersects(&self, other: Self) -> bool {
!(Self {
bits: self.bits & other.bits,
})
.is_empty()
}
/// Returns `true` if all of the flags in `other` are contained within `self`.
#[inline]
pub const fn contains(&self, other: Self) -> bool {
(self.bits & other.bits) == other.bits
}
/// Inserts the specified flags in-place.
#[inline]
pub fn insert(&mut self, other: Self) {
self.bits |= other.bits;
}
/// Removes the specified flags in-place.
#[inline]
pub fn remove(&mut self, other: Self) {
self.bits &= !other.bits;
}
/// Toggles the specified flags in-place.
#[inline]
pub fn toggle(&mut self, other: Self) {
self.bits ^= other.bits;
}
/// Returns the intersection between the flags in `self` and
/// `other`.
///
/// Specifically, the returned set contains only the flags which are
/// present in *both* `self` *and* `other`.
///
/// This is equivalent to using the `&` operator (e.g.
/// [`ops::BitAnd`]), as in `flags & other`.
///
#[inline]
#[must_use]
pub const fn intersection(self, other: Self) -> Self {
Self {
bits: self.bits & other.bits,
}
}
/// Returns the union of between the flags in `self` and `other`.
///
/// Specifically, the returned set contains all flags which are
/// present in *either* `self` *or* `other`, including any which are
/// present in both.
///
/// This is equivalent to using the `|` operator (e.g.
/// [`ops::BitOr`]), as in `flags | other`.
///
#[inline]
#[must_use]
pub const fn union(self, other: Self) -> Self {
Self {
bits: self.bits | other.bits,
}
}
/// Returns the difference between the flags in `self` and `other`.
///
/// Specifically, the returned set contains all flags present in
/// `self`, except for the ones present in `other`.
///
/// It is also conceptually equivalent to the "bit-clear" operation:
/// `flags & !other` (and this syntax is also supported).
///
/// This is equivalent to using the `-` operator (e.g.
/// [`ops::Sub`]), as in `flags - other`.
///
#[inline]
#[must_use]
pub const fn difference(self, other: Self) -> Self {
Self {
bits: self.bits & !other.bits,
}
}
}
impl std::ops::BitOr for EntryFormat {
type Output = Self;
/// Returns the union of the two sets of flags.
#[inline]
fn bitor(self, other: EntryFormat) -> Self {
Self {
bits: self.bits | other.bits,
}
}
}
impl std::ops::BitOrAssign for EntryFormat {
/// Adds the set of flags.
#[inline]
fn bitor_assign(&mut self, other: Self) {
self.bits |= other.bits;
}
}
impl std::ops::BitXor for EntryFormat {
type Output = Self;
/// Returns the left flags, but with all the right flags toggled.
#[inline]
fn bitxor(self, other: Self) -> Self {
Self {
bits: self.bits ^ other.bits,
}
}
}
impl std::ops::BitXorAssign for EntryFormat {
/// Toggles the set of flags.
#[inline]
fn bitxor_assign(&mut self, other: Self) {
self.bits ^= other.bits;
}
}
impl std::ops::BitAnd for EntryFormat {
type Output = Self;
/// Returns the intersection between the two sets of flags.
#[inline]
fn bitand(self, other: Self) -> Self {
Self {
bits: self.bits & other.bits,
}
}
}
impl std::ops::BitAndAssign for EntryFormat {
/// Disables all flags disabled in the set.
#[inline]
fn bitand_assign(&mut self, other: Self) {
self.bits &= other.bits;
}
}
impl std::ops::Sub for EntryFormat {
type Output = Self;
/// Returns the set difference of the two sets of flags.
#[inline]
fn sub(self, other: Self) -> Self {
Self {
bits: self.bits & !other.bits,
}
}
}
impl std::ops::SubAssign for EntryFormat {
/// Disables all flags enabled in the set.
#[inline]
fn sub_assign(&mut self, other: Self) {
self.bits &= !other.bits;
}
}
impl std::ops::Not for EntryFormat {
type Output = Self;
/// Returns the complement of this set of flags.
#[inline]
fn not(self) -> Self {
Self { bits: !self.bits } & Self::all()
}
}
impl std::fmt::Debug for EntryFormat {
fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
let members: &[(&str, Self)] = &[
(
"INNER_INDEX_BIT_COUNT_MASK",
Self::INNER_INDEX_BIT_COUNT_MASK,
),
("MAP_ENTRY_SIZE_MASK", Self::MAP_ENTRY_SIZE_MASK),
];
let mut first = true;
for (name, value) in members {
if self.contains(*value) {
if !first {
f.write_str(" | ")?;
}
first = false;
f.write_str(name)?;
}
}
if first {
f.write_str("(empty)")?;
}
Ok(())
}
}
impl std::fmt::Binary for EntryFormat {
fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
std::fmt::Binary::fmt(&self.bits, f)
}
}
impl std::fmt::Octal for EntryFormat {
fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
std::fmt::Octal::fmt(&self.bits, f)
}
}
impl std::fmt::LowerHex for EntryFormat {
fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
std::fmt::LowerHex::fmt(&self.bits, f)
}
}
impl std::fmt::UpperHex for EntryFormat {
fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
std::fmt::UpperHex::fmt(&self.bits, f)
}
}
impl font_types::Scalar for EntryFormat {
type Raw = <u8 as font_types::Scalar>::Raw;
fn to_raw(self) -> Self::Raw {
self.bits().to_raw()
}
fn from_raw(raw: Self::Raw) -> Self {
let t = <u8>::from_raw(raw);
Self::from_bits_truncate(t)
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> From<EntryFormat> for FieldType<'a> {
fn from(src: EntryFormat) -> FieldType<'a> {
src.bits().into()
}
}
impl<'a> MinByteRange<'a> for VariationRegionList<'a> {
fn min_byte_range(&self) -> Range<usize> {
0..self.variation_regions_byte_range().end
}
fn min_table_bytes(&self) -> &'a [u8] {
let range = self.min_byte_range();
self.data.as_bytes().get(range).unwrap_or_default()
}
}
impl<'a> FontRead<'a> for VariationRegionList<'a> {
fn read(data: FontData<'a>) -> Result<Self, ReadError> {
#[allow(clippy::absurd_extreme_comparisons)]
if data.len() < Self::MIN_SIZE {
return Err(ReadError::OutOfBounds);
}
Ok(Self { data })
}
}
#[derive(Clone)]
pub struct VariationRegionList<'a> {
data: FontData<'a>,
}
#[allow(clippy::needless_lifetimes)]
impl<'a> VariationRegionList<'a> {
pub const MIN_SIZE: usize = (u16::RAW_BYTE_LEN + u16::RAW_BYTE_LEN);
basic_table_impls!(impl_the_methods);
/// The number of variation axes for this font. This must be the
/// same number as axisCount in the 'fvar' table.
pub fn axis_count(&self) -> u16 {
let range = self.axis_count_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// The number of variation region tables in the variation region
/// list. Must be less than 32,768.
pub fn region_count(&self) -> u16 {
let range = self.region_count_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// Array of variation regions.
pub fn variation_regions(&self) -> ComputedArray<'a, VariationRegion<'a>> {
let range = self.variation_regions_byte_range();
self.data
.read_with_args(range, &self.axis_count())
.unwrap_or_default()
}
pub fn axis_count_byte_range(&self) -> Range<usize> {
let start = 0;
let end = start + u16::RAW_BYTE_LEN;
start..end
}
pub fn region_count_byte_range(&self) -> Range<usize> {
let start = self.axis_count_byte_range().end;
let end = start + u16::RAW_BYTE_LEN;
start..end
}
pub fn variation_regions_byte_range(&self) -> Range<usize> {
let region_count = self.region_count();
let start = self.region_count_byte_range().end;
let end = start
+ (transforms::to_usize(region_count)).saturating_mul(
<VariationRegion as ComputeSize>::compute_size(&self.axis_count()).unwrap_or(0),
);
start..end
}
}
const _: () = assert!(FontData::default_data_long_enough(
VariationRegionList::MIN_SIZE
));
impl Default for VariationRegionList<'_> {
fn default() -> Self {
Self {
data: FontData::default_table_data(),
}
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for VariationRegionList<'a> {
fn type_name(&self) -> &str {
"VariationRegionList"
}
fn get_field(&self, idx: usize) -> Option<Field<'a>> {
match idx {
0usize => Some(Field::new("axis_count", self.axis_count())),
1usize => Some(Field::new("region_count", self.region_count())),
2usize => Some(Field::new(
"variation_regions",
traversal::FieldType::computed_array(
"VariationRegion",
self.variation_regions(),
self.offset_data(),
),
)),
_ => None,
}
}
}
#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for VariationRegionList<'a> {
fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
(self as &dyn SomeTable<'a>).fmt(f)
}
}
#[derive(Clone, Debug, PartialEq, Eq, PartialOrd, Ord, Hash)]
pub struct VariationRegion<'a> {
/// Array of region axis coordinates records, in the order of axes
/// given in the 'fvar' table.
pub region_axes: &'a [RegionAxisCoordinates],
}
impl<'a> VariationRegion<'a> {
/// Array of region axis coordinates records, in the order of axes
/// given in the 'fvar' table.
pub fn region_axes(&self) -> &'a [RegionAxisCoordinates] {
self.region_axes
}
}
impl ReadArgs for VariationRegion<'_> {
type Args = u16;
}
impl ComputeSize for VariationRegion<'_> {
#[allow(clippy::needless_question_mark)]
fn compute_size(args: &u16) -> Result<usize, ReadError> {
let axis_count = *args;
Ok((transforms::to_usize(axis_count)).saturating_mul(RegionAxisCoordinates::RAW_BYTE_LEN))
}
}
impl<'a> FontReadWithArgs<'a> for VariationRegion<'a> {
fn read_with_args(data: FontData<'a>, args: &u16) -> Result<Self, ReadError> {
let mut cursor = data.cursor();
let axis_count = *args;
Ok(Self {
region_axes: cursor.read_array(transforms::to_usize(axis_count))?,
})
}
}
#[allow(clippy::needless_lifetimes)]
impl<'a> VariationRegion<'a> {
/// A constructor that requires additional arguments.
///
/// This type requires some external state in order to be
/// parsed.
pub fn read(data: FontData<'a>, axis_count: u16) -> Result<Self, ReadError> {
let args = axis_count;
Self::read_with_args(data, &args)
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> SomeRecord<'a> for VariationRegion<'a> {
fn traverse(self, data: FontData<'a>) -> RecordResolver<'a> {
RecordResolver {
name: "VariationRegion",
get_field: Box::new(move |idx, _data| match idx {
0usize => Some(Field::new(
"region_axes",
traversal::FieldType::array_of_records(
stringify!(RegionAxisCoordinates),
self.region_axes(),
_data,
),
)),
_ => None,
}),
data,
}
}
}
#[derive(Clone, Debug, PartialEq, Eq, PartialOrd, Ord, Hash, Copy, bytemuck :: AnyBitPattern)]
#[repr(C)]
#[repr(packed)]
pub struct RegionAxisCoordinates {
/// The region start coordinate value for the current axis.
pub start_coord: BigEndian<F2Dot14>,
/// The region peak coordinate value for the current axis.
pub peak_coord: BigEndian<F2Dot14>,
/// The region end coordinate value for the current axis.
pub end_coord: BigEndian<F2Dot14>,
}
impl RegionAxisCoordinates {
/// The region start coordinate value for the current axis.
pub fn start_coord(&self) -> F2Dot14 {
self.start_coord.get()
}
/// The region peak coordinate value for the current axis.
pub fn peak_coord(&self) -> F2Dot14 {
self.peak_coord.get()
}
/// The region end coordinate value for the current axis.
pub fn end_coord(&self) -> F2Dot14 {
self.end_coord.get()
}
}
impl FixedSize for RegionAxisCoordinates {
const RAW_BYTE_LEN: usize =
F2Dot14::RAW_BYTE_LEN + F2Dot14::RAW_BYTE_LEN + F2Dot14::RAW_BYTE_LEN;
}
#[cfg(feature = "experimental_traverse")]
impl<'a> SomeRecord<'a> for RegionAxisCoordinates {
fn traverse(self, data: FontData<'a>) -> RecordResolver<'a> {
RecordResolver {
name: "RegionAxisCoordinates",
get_field: Box::new(move |idx, _data| match idx {
0usize => Some(Field::new("start_coord", self.start_coord())),
1usize => Some(Field::new("peak_coord", self.peak_coord())),
2usize => Some(Field::new("end_coord", self.end_coord())),
_ => None,
}),
data,
}
}
}
impl<'a> MinByteRange<'a> for ItemVariationStore<'a> {
fn min_byte_range(&self) -> Range<usize> {
0..self.item_variation_data_offsets_byte_range().end
}
fn min_table_bytes(&self) -> &'a [u8] {
let range = self.min_byte_range();
self.data.as_bytes().get(range).unwrap_or_default()
}
}
impl<'a> FontRead<'a> for ItemVariationStore<'a> {
fn read(data: FontData<'a>) -> Result<Self, ReadError> {
#[allow(clippy::absurd_extreme_comparisons)]
if data.len() < Self::MIN_SIZE {
return Err(ReadError::OutOfBounds);
}
Ok(Self { data })
}
}
#[derive(Clone)]
pub struct ItemVariationStore<'a> {
data: FontData<'a>,
}
#[allow(clippy::needless_lifetimes)]
impl<'a> ItemVariationStore<'a> {
pub const MIN_SIZE: usize = (u16::RAW_BYTE_LEN + Offset32::RAW_BYTE_LEN + u16::RAW_BYTE_LEN);
basic_table_impls!(impl_the_methods);
/// Format— set to 1
pub fn format(&self) -> u16 {
let range = self.format_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// Offset in bytes from the start of the item variation store to
/// the variation region list.
pub fn variation_region_list_offset(&self) -> Offset32 {
let range = self.variation_region_list_offset_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// Attempt to resolve [`variation_region_list_offset`][Self::variation_region_list_offset].
pub fn variation_region_list(&self) -> Result<VariationRegionList<'a>, ReadError> {
let data = self.data;
self.variation_region_list_offset().resolve(data)
}
/// The number of item variation data subtables.
pub fn item_variation_data_count(&self) -> u16 {
let range = self.item_variation_data_count_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// Offsets in bytes from the start of the item variation store to
/// each item variation data subtable.
pub fn item_variation_data_offsets(&self) -> &'a [BigEndian<Nullable<Offset32>>] {
let range = self.item_variation_data_offsets_byte_range();
self.data.read_array(range).ok().unwrap_or_default()
}
/// A dynamically resolving wrapper for [`item_variation_data_offsets`][Self::item_variation_data_offsets].
pub fn item_variation_data(
&self,
) -> ArrayOfNullableOffsets<'a, ItemVariationData<'a>, Offset32> {
let data = self.data;
let offsets = self.item_variation_data_offsets();
ArrayOfNullableOffsets::new(offsets, data, ())
}
pub fn format_byte_range(&self) -> Range<usize> {
let start = 0;
let end = start + u16::RAW_BYTE_LEN;
start..end
}
pub fn variation_region_list_offset_byte_range(&self) -> Range<usize> {
let start = self.format_byte_range().end;
let end = start + Offset32::RAW_BYTE_LEN;
start..end
}
pub fn item_variation_data_count_byte_range(&self) -> Range<usize> {
let start = self.variation_region_list_offset_byte_range().end;
let end = start + u16::RAW_BYTE_LEN;
start..end
}
pub fn item_variation_data_offsets_byte_range(&self) -> Range<usize> {
let item_variation_data_count = self.item_variation_data_count();
let start = self.item_variation_data_count_byte_range().end;
let end = start
+ (transforms::to_usize(item_variation_data_count))
.saturating_mul(Offset32::RAW_BYTE_LEN);
start..end
}
}
const _: () = assert!(FontData::default_data_long_enough(
ItemVariationStore::MIN_SIZE
));
impl Default for ItemVariationStore<'_> {
fn default() -> Self {
Self {
data: FontData::default_table_data(),
}
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for ItemVariationStore<'a> {
fn type_name(&self) -> &str {
"ItemVariationStore"
}
fn get_field(&self, idx: usize) -> Option<Field<'a>> {
match idx {
0usize => Some(Field::new("format", self.format())),
1usize => Some(Field::new(
"variation_region_list_offset",
FieldType::offset(
self.variation_region_list_offset(),
self.variation_region_list(),
),
)),
2usize => Some(Field::new(
"item_variation_data_count",
self.item_variation_data_count(),
)),
3usize => Some(Field::new(
"item_variation_data_offsets",
FieldType::from(self.item_variation_data()),
)),
_ => None,
}
}
}
#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for ItemVariationStore<'a> {
fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
(self as &dyn SomeTable<'a>).fmt(f)
}
}
impl<'a> MinByteRange<'a> for ItemVariationData<'a> {
fn min_byte_range(&self) -> Range<usize> {
0..self.delta_sets_byte_range().end
}
fn min_table_bytes(&self) -> &'a [u8] {
let range = self.min_byte_range();
self.data.as_bytes().get(range).unwrap_or_default()
}
}
impl<'a> FontRead<'a> for ItemVariationData<'a> {
fn read(data: FontData<'a>) -> Result<Self, ReadError> {
#[allow(clippy::absurd_extreme_comparisons)]
if data.len() < Self::MIN_SIZE {
return Err(ReadError::OutOfBounds);
}
Ok(Self { data })
}
}
#[derive(Clone)]
pub struct ItemVariationData<'a> {
data: FontData<'a>,
}
#[allow(clippy::needless_lifetimes)]
impl<'a> ItemVariationData<'a> {
pub const MIN_SIZE: usize = (u16::RAW_BYTE_LEN + u16::RAW_BYTE_LEN + u16::RAW_BYTE_LEN);
basic_table_impls!(impl_the_methods);
/// The number of delta sets for distinct items.
pub fn item_count(&self) -> u16 {
let range = self.item_count_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// A packed field: the high bit is a flag—see details below.
pub fn word_delta_count(&self) -> u16 {
let range = self.word_delta_count_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// The number of variation regions referenced.
pub fn region_index_count(&self) -> u16 {
let range = self.region_index_count_byte_range();
self.data.read_at(range.start).ok().unwrap()
}
/// Array of indices into the variation region list for the regions
/// referenced by this item variation data table.
pub fn region_indexes(&self) -> &'a [BigEndian<u16>] {
let range = self.region_indexes_byte_range();
self.data.read_array(range).ok().unwrap_or_default()
}
/// Delta-set rows.
pub fn delta_sets(&self) -> &'a [u8] {
let range = self.delta_sets_byte_range();
self.data.read_array(range).ok().unwrap_or_default()
}
pub fn item_count_byte_range(&self) -> Range<usize> {
let start = 0;
let end = start + u16::RAW_BYTE_LEN;
start..end
}
pub fn word_delta_count_byte_range(&self) -> Range<usize> {
let start = self.item_count_byte_range().end;
let end = start + u16::RAW_BYTE_LEN;
start..end
}
pub fn region_index_count_byte_range(&self) -> Range<usize> {
let start = self.word_delta_count_byte_range().end;
let end = start + u16::RAW_BYTE_LEN;
start..end
}
pub fn region_indexes_byte_range(&self) -> Range<usize> {
let region_index_count = self.region_index_count();
let start = self.region_index_count_byte_range().end;
let end =
start + (transforms::to_usize(region_index_count)).saturating_mul(u16::RAW_BYTE_LEN);
start..end
}
pub fn delta_sets_byte_range(&self) -> Range<usize> {
let item_count = self.item_count();
let word_delta_count = self.word_delta_count();
let region_index_count = self.region_index_count();
let start = self.region_indexes_byte_range().end;
let end = start
+ (ItemVariationData::delta_sets_len(item_count, word_delta_count, region_index_count))
.saturating_mul(u8::RAW_BYTE_LEN);
start..end
}
}
const _: () = assert!(FontData::default_data_long_enough(
ItemVariationData::MIN_SIZE
));
impl Default for ItemVariationData<'_> {
fn default() -> Self {
Self {
data: FontData::default_table_data(),
}
}
}
#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for ItemVariationData<'a> {
fn type_name(&self) -> &str {
"ItemVariationData"
}
fn get_field(&self, idx: usize) -> Option<Field<'a>> {
match idx {
0usize => Some(Field::new("item_count", self.item_count())),
1usize => Some(Field::new("word_delta_count", self.word_delta_count())),
2usize => Some(Field::new("region_index_count", self.region_index_count())),
3usize => Some(Field::new("region_indexes", self.region_indexes())),
4usize => Some(Field::new("delta_sets", self.delta_sets())),
_ => None,
}
}
}
#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for ItemVariationData<'a> {
fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
(self as &dyn SomeTable<'a>).fmt(f)
}
}