Revision control
Copy as Markdown
Other Tools
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
//! Traits that define how to transfer values via the FFI layer.
//!
//! These traits define how to pass values over the FFI in various ways: as arguments or as return
//! values, from Rust to the foreign side and vice-versa. These traits are mainly used by the
//! proc-macro generated code. The goal is to allow the proc-macros to go from a type name to the
//! correct function for a given FFI operation.
//!
//! The main traits form a sort-of tree structure from general to specific:
//! ```ignore
//!
//! [FfiConverter]
//! |
//! -----------------------------------------
//! | |
//! [Lower] [Lift]
//! | |
//! ----------------- --------------
//! | | | |
//! [LowerReturn] [LowerError] [LiftRef] [LiftReturn]
//! ```
//!
//! There's also:
//! - [TypeId], which is implemented for all types that implement any of the above traits.
//! - [ConvertError], which is implement for errors that can be used in callback interfaces.
//!
//! The `derive_ffi_traits` macro can be used to derive the specific traits from the general ones.
//! Here's the main ways we implement these traits:
//!
//! * For most types we implement [FfiConverter] and use [derive_ffi_traits] to implement the rest
//! * If a type can only be lifted/lowered, then we implement [Lift] or [Lower] and use
//! [derive_ffi_traits] to implement the rest
//! * If a type needs special-case handling, like `Result<>` and `()`, we implement the traits
//! directly.
//!
//! FfiConverter has a generic parameter, that's filled in with a type local to the UniFFI consumer crate.
//! This allows us to work around the Rust orphan rules for remote types. See
//! for details.
//!
//! ## Safety
//!
//! Most traits are unsafe (implementing it requires `unsafe impl`) because we can't guarantee
//! that it's safe to pass your type out to foreign-language code and back again. Buggy
//! implementations of this trait might violate some assumptions made by the generated code,
//! or might not match with the corresponding code in the generated foreign-language bindings.
//! These traits should not be used directly, only in generated code, and the generated code should
//! have fixture tests to test that everything works correctly together.
use std::{borrow::Borrow, mem::ManuallyDrop, sync::Arc};
use anyhow::bail;
use bytes::Buf;
use crate::{
FfiDefault, Handle, LiftArgsError, MetadataBuffer, Result, RustBuffer, RustCallError,
RustCallStatus, RustCallStatusCode, UnexpectedUniFFICallbackError,
};
/// Generalized FFI conversions
///
/// This trait is not used directly by the code generation, but implement this and calling
/// [derive_ffi_traits] is a simple way to implement all the traits that are.
///
/// ## Safety
///
/// All traits are unsafe (implementing it requires `unsafe impl`) because we can't guarantee
/// that it's safe to pass your type out to foreign-language code and back again. Buggy
/// implementations of this trait might violate some assumptions made by the generated code,
/// or might not match with the corresponding code in the generated foreign-language bindings.
/// These traits should not be used directly, only in generated code, and the generated code should
/// have fixture tests to test that everything works correctly together.
pub unsafe trait FfiConverter<UT>: Sized {
/// The low-level type used for passing values of this type over the FFI.
///
/// This must be a C-compatible type (e.g. a numeric primitive, a `#[repr(C)]` struct) into
/// which values of the target rust type can be converted.
///
/// For complex data types, we currently recommend using `RustBuffer` and serializing
/// the data for transfer. In theory it could be possible to build a matching
/// `#[repr(C)]` struct for a complex data type and pass that instead, but explicit
/// serialization is simpler and safer as a starting point.
///
/// If a type implements multiple FFI traits, `FfiType` must be the same for all of them.
type FfiType: FfiDefault;
/// Lower a rust value of the target type, into an FFI value of type Self::FfiType.
///
/// This trait method is used for sending data from rust to the foreign language code,
/// by (hopefully cheaply!) converting it into something that can be passed over the FFI
/// and reconstructed on the other side.
///
/// Note that this method takes an owned value; this allows it to transfer ownership in turn to
/// the foreign language code, e.g. by boxing the value and passing a pointer.
fn lower(obj: Self) -> Self::FfiType;
/// Lift a rust value of the target type, from an FFI value of type Self::FfiType.
///
/// This trait method is used for receiving data from the foreign language code in rust,
/// by (hopefully cheaply!) converting it from a low-level FFI value of type Self::FfiType
/// into a high-level rust value of the target type.
///
/// Since we cannot statically guarantee that the foreign-language code will send valid
/// values of type Self::FfiType, this method is fallible.
fn try_lift(v: Self::FfiType) -> Result<Self>;
/// Write a rust value into a buffer, to send over the FFI in serialized form.
///
/// This trait method can be used for sending data from rust to the foreign language code,
/// in cases where we're not able to use a special-purpose FFI type and must fall back to
/// sending serialized bytes.
///
/// Note that this method takes an owned value because it's transferring ownership
/// to the foreign language code via the RustBuffer.
fn write(obj: Self, buf: &mut Vec<u8>);
/// Read a rust value from a buffer, received over the FFI in serialized form.
///
/// This trait method can be used for receiving data from the foreign language code in rust,
/// in cases where we're not able to use a special-purpose FFI type and must fall back to
/// receiving serialized bytes.
///
/// Since we cannot statically guarantee that the foreign-language code will send valid
/// serialized bytes for the target type, this method is fallible.
///
/// Note the slightly unusual type here - we want a mutable reference to a slice of bytes,
/// because we want to be able to advance the start of the slice after reading an item
/// from it (but will not mutate the actual contents of the slice).
fn try_read(buf: &mut &[u8]) -> Result<Self>;
/// Type ID metadata, serialized into a [MetadataBuffer].
const TYPE_ID_META: MetadataBuffer;
}
/// FfiConverter for Arc-types
///
/// This trait gets around the orphan rule limitations, which prevent library crates from
/// implementing `FfiConverter` on an Arc. When this is implemented for T, we generate an
/// `FfiConverter` impl for Arc<T>.
///
/// Note: There's no need for `FfiConverterBox`, since Box is a fundamental type.
///
/// ## Safety
///
/// All traits are unsafe (implementing it requires `unsafe impl`) because we can't guarantee
/// that it's safe to pass your type out to foreign-language code and back again. Buggy
/// implementations of this trait might violate some assumptions made by the generated code,
/// or might not match with the corresponding code in the generated foreign-language bindings.
/// These traits should not be used directly, only in generated code, and the generated code should
/// have fixture tests to test that everything works correctly together.
pub unsafe trait FfiConverterArc<UT>: Send + Sync {
type FfiType: FfiDefault;
fn lower(obj: Arc<Self>) -> Self::FfiType;
fn try_lift(v: Self::FfiType) -> Result<Arc<Self>>;
fn write(obj: Arc<Self>, buf: &mut Vec<u8>);
fn try_read(buf: &mut &[u8]) -> Result<Arc<Self>>;
const TYPE_ID_META: MetadataBuffer;
}
unsafe impl<T, UT> FfiConverter<UT> for Arc<T>
where
T: FfiConverterArc<UT> + ?Sized,
{
type FfiType = T::FfiType;
fn lower(obj: Self) -> Self::FfiType {
T::lower(obj)
}
fn try_lift(v: Self::FfiType) -> Result<Self> {
T::try_lift(v)
}
fn write(obj: Self, buf: &mut Vec<u8>) {
T::write(obj, buf)
}
fn try_read(buf: &mut &[u8]) -> Result<Self> {
T::try_read(buf)
}
const TYPE_ID_META: MetadataBuffer = T::TYPE_ID_META;
}
/// Lift values passed by the foreign code over the FFI into Rust values
///
/// This is used by the code generation to handle arguments. It's usually derived from
/// [FfiConverter], except for types that only support lifting but not lowering.
///
/// See [FfiConverter] for a discussion of the methods
///
/// ## Safety
///
/// All traits are unsafe (implementing it requires `unsafe impl`) because we can't guarantee
/// that it's safe to pass your type out to foreign-language code and back again. Buggy
/// implementations of this trait might violate some assumptions made by the generated code,
/// or might not match with the corresponding code in the generated foreign-language bindings.
/// These traits should not be used directly, only in generated code, and the generated code should
/// have fixture tests to test that everything works correctly together.
pub unsafe trait Lift<UT>: Sized {
type FfiType;
fn try_lift(v: Self::FfiType) -> Result<Self>;
fn try_read(buf: &mut &[u8]) -> Result<Self>;
/// Convenience method
fn try_lift_from_rust_buffer(v: RustBuffer) -> Result<Self> {
let vec = v.destroy_into_vec();
let mut buf = vec.as_slice();
let value = Self::try_read(&mut buf)?;
match Buf::remaining(&buf) {
0 => Ok(value),
n => bail!("junk data left in buffer after lifting (count: {n})",),
}
}
}
/// Lower Rust values to pass them to the foreign code
///
/// This is used to pass arguments to callback interfaces. It's usually derived from
/// [FfiConverter], except for types that only support lowering but not lifting.
///
/// See [FfiConverter] for a discussion of the methods
///
/// ## Safety
///
/// All traits are unsafe (implementing it requires `unsafe impl`) because we can't guarantee
/// that it's safe to pass your type out to foreign-language code and back again. Buggy
/// implementations of this trait might violate some assumptions made by the generated code,
/// or might not match with the corresponding code in the generated foreign-language bindings.
/// These traits should not be used directly, only in generated code, and the generated code should
/// have fixture tests to test that everything works correctly together.
pub unsafe trait Lower<UT>: Sized {
type FfiType: FfiDefault;
fn lower(obj: Self) -> Self::FfiType;
fn write(obj: Self, buf: &mut Vec<u8>);
/// Convenience method
fn lower_into_rust_buffer(obj: Self) -> RustBuffer {
let mut buf = ::std::vec::Vec::new();
Self::write(obj, &mut buf);
RustBuffer::from_vec(buf)
}
}
/// Return Rust values to the foreign code
///
/// This is usually derived from [Lower], but we special case types like `Result<>` and `()`.
///
/// ## Safety
///
/// All traits are unsafe (implementing it requires `unsafe impl`) because we can't guarantee
/// that it's safe to pass your type out to foreign-language code and back again. Buggy
/// implementations of this trait might violate some assumptions made by the generated code,
/// or might not match with the corresponding code in the generated foreign-language bindings.
/// These traits should not be used directly, only in generated code, and the generated code should
/// have fixture tests to test that everything works correctly together.
pub unsafe trait LowerReturn<UT>: Sized {
/// The type that should be returned by scaffolding functions for this type.
///
/// When derived, it's the same as `FfiType`.
type ReturnType: FfiDefault;
/// Lower the return value from an scaffolding call
///
/// Returns values that [rust_call] expects:
///
/// - Ok(v) for `Ok` returns and non-result returns, where v is the lowered return value
/// - `Err(RustCallError::Error(buf))` for `Err` returns where `buf` is serialized error value.
fn lower_return(v: Self) -> Result<Self::ReturnType, RustCallError>;
/// Lower the return value for failed argument lifts
///
/// This is called when we fail to make a scaffolding call, because of an error lifting an
/// argument. It should return a value that [rust_call] expects:
///
/// - By default, this is `Err(RustCallError::InternalError(msg))` where `msg` is message
/// describing the failed lift.
/// - For Result types, if we can downcast the error to the `Err` value, then return
/// `Err(RustCallError::Error(buf))`. This results in better exception throws on the foreign
/// side.
fn handle_failed_lift(error: LiftArgsError) -> Result<Self::ReturnType, RustCallError> {
let LiftArgsError { arg_name, error } = error;
Err(RustCallError::InternalError(format!(
"Failed to convert arg '{arg_name}': {error}"
)))
}
}
/// Return Rust error values
///
/// This is implemented for types that can be the `E` param in `Result<T, E>`.
/// It's is usually derived from [Lower], but we sometimes special case it.
///
/// ## Safety
///
/// All traits are unsafe (implementing it requires `unsafe impl`) because we can't guarantee
/// that it's safe to pass your type out to foreign-language code and back again. Buggy
/// implementations of this trait might violate some assumptions made by the generated code,
/// or might not match with the corresponding code in the generated foreign-language bindings.
/// These traits should not be used directly, only in generated code, and the generated code should
/// have fixture tests to test that everything works correctly together.
pub unsafe trait LowerError<UT>: Sized {
/// Lower this value for scaffolding function return
///
/// Lower the type into a RustBuffer. `RustCallStatus.error_buf` will be set to this.
fn lower_error(obj: Self) -> RustBuffer;
}
/// Return foreign values to Rust
///
/// This is usually derived from [Lower], but we special case types like `Result<>` and `()`.
///
/// ## Safety
///
/// All traits are unsafe (implementing it requires `unsafe impl`) because we can't guarantee
/// that it's safe to pass your type out to foreign-language code and back again. Buggy
/// implementations of this trait might violate some assumptions made by the generated code,
/// or might not match with the corresponding code in the generated foreign-language bindings.
/// These traits should not be used directly, only in generated code, and the generated code should
/// have fixture tests to test that everything works correctly together.
pub unsafe trait LiftReturn<UT>: Sized {
/// FFI return type for trait interfaces
type ReturnType;
/// Lift a successfully returned value from a trait interface
fn try_lift_successful_return(v: Self::ReturnType) -> Result<Self>;
/// Lift a foreign returned value from a trait interface
///
/// When we call a foreign-implemented trait interface method, we pass a &mut RustCallStatus
/// and get [Self::ReturnType] returned. This method takes both of those and lifts `Self` from
/// it.
fn lift_foreign_return(ffi_return: Self::ReturnType, call_status: RustCallStatus) -> Self {
match call_status.code {
RustCallStatusCode::Success => Self::try_lift_successful_return(ffi_return)
.unwrap_or_else(|e| {
Self::handle_callback_unexpected_error(UnexpectedUniFFICallbackError::new(e))
}),
RustCallStatusCode::Error => {
Self::lift_error(ManuallyDrop::into_inner(call_status.error_buf))
}
_ => {
let e = <String as FfiConverter<crate::UniFfiTag>>::try_lift(
ManuallyDrop::into_inner(call_status.error_buf),
)
.unwrap_or_else(|e| format!("(Error lifting message: {e}"));
Self::handle_callback_unexpected_error(UnexpectedUniFFICallbackError::new(e))
}
}
}
/// Lift a Rust value for a callback interface method error result
///
/// This is called for "expected errors" -- the callback method returns a Result<> type and the
/// foreign code throws an exception that corresponds to the error type.
fn lift_error(_buf: RustBuffer) -> Self {
panic!("Callback interface method returned unexpected error")
}
/// Lift a Rust value for an unexpected callback interface error
///
/// The main reason this is called is when the callback interface throws an error type that
/// doesn't match the Rust trait definition. It's also called for corner cases, like when the
/// foreign code doesn't follow the FFI contract.
///
/// The default implementation panics unconditionally. Errors used in callback interfaces
/// handle this using the `From<UnexpectedUniFFICallbackError>` impl that the library author
/// must provide.
fn handle_callback_unexpected_error(e: UnexpectedUniFFICallbackError) -> Self {
panic!("Callback interface failure: {e}")
}
}
/// Lift references
///
/// This is usually derived from [Lift] and also implemented for the inner `T` value of smart
/// pointers. For example, if `Lift` is implemented for `Arc<T>`, then we implement this to lift
///
/// ## Safety
///
/// All traits are unsafe (implementing it requires `unsafe impl`) because we can't guarantee
/// that it's safe to pass your type out to foreign-language code and back again. Buggy
/// implementations of this trait might violate some assumptions made by the generated code,
/// or might not match with the corresponding code in the generated foreign-language bindings.
/// These traits should not be used directly, only in generated code, and the generated code should
/// have fixture tests to test that everything works correctly together.
/// `&T` using the Arc.
pub unsafe trait LiftRef<UT> {
type LiftType: Lift<UT> + Borrow<Self>;
}
/// Type ID metadata
///
/// This is used to build up more complex metadata. For example, the `MetadataBuffer` for function
/// signatures includes a copy of this metadata for each argument and return type.
pub trait TypeId<UT> {
const TYPE_ID_META: MetadataBuffer;
}
pub trait ConvertError<UT>: Sized {
fn try_convert_unexpected_callback_error(e: UnexpectedUniFFICallbackError) -> Result<Self>;
}
/// Manage handles for `Arc<Self>` instances
///
/// Handles are used to manage objects that are passed across the FFI. They general usage is:
///
/// * Rust creates an `Arc<>`
/// * Rust uses `new_handle` to create a handle that represents the Arc reference
/// * Rust passes the handle to the foreign code as a `u64`
/// * The foreign code passes the handle back to `Rust` to refer to the object:
/// * Handle are usually passed as borrowed values. When an FFI function inputs a handle as an
/// argument, the foreign code simply passes a copy of the `u64` to Rust, which calls `get_arc`
/// to get a new `Arc<>` clone for it.
/// * Handles are returned as owned values. When an FFI function returns a handle, the foreign
/// code either stops using the handle after returning it or calls `clone_handle` and returns
/// the clone.
/// * Eventually the foreign code may destroy their handle by passing it into a "free" FFI
/// function. This functions input an owned handle and consume it.
///
/// The foreign code also defines their own handles. These represent foreign objects that are
/// passed to Rust. Using foreign handles is essentially the same as above, but in reverse.
///
/// Handles must always be `Send` and the objects they reference must always be `Sync`.
/// This means that it must be safe to send handles to other threads and use them there.
///
/// Note: this only needs to be derived for unsized types, there's a blanket impl for `T: Sized`.
///
/// ## Safety
///
/// All traits are unsafe (implementing it requires `unsafe impl`) because we can't guarantee
/// that it's safe to pass your type out to foreign-language code and back again. Buggy
/// implementations of this trait might violate some assumptions made by the generated code,
/// or might not match with the corresponding code in the generated foreign-language bindings.
/// These traits should not be used directly, only in generated code, and the generated code should
/// have fixture tests to test that everything works correctly together.
/// `&T` using the Arc.
pub unsafe trait HandleAlloc<UT>: Send + Sync {
/// Create a new handle for an Arc value
///
/// Use this to lower an Arc into a handle value before passing it across the FFI.
/// The newly-created handle will have reference count = 1.
fn new_handle(value: Arc<Self>) -> Handle;
/// Clone a handle
///
/// This creates a new handle from an existing one.
/// It's used when the foreign code wants to pass back an owned handle and still keep a copy
/// for themselves.
/// # Safety
/// The handle must be valid.
unsafe fn clone_handle(handle: Handle) -> Handle;
/// Get a clone of the `Arc<>` using a "borrowed" handle.
///
/// # Safety
/// The handle must be valid. Take care that the handle can
/// not be destroyed between when it's passed and when
/// `get_arc()` is called. #1797 is a cautionary tale.
unsafe fn get_arc(handle: Handle) -> Arc<Self> {
Self::consume_handle(Self::clone_handle(handle))
}
/// Consume a handle, getting back the initial `Arc<>`
/// # Safety
/// The handle must be valid.
unsafe fn consume_handle(handle: Handle) -> Arc<Self>;
}
/// Derive FFI traits
///
/// This can be used to derive:
/// * [Lower] and [Lift] from [FfiConverter]
/// * [LowerReturn] from [Lower]
/// * [LiftReturn] and [LiftRef] from [Lift]
///
/// Usage:
/// ```ignore
///
/// // Derive everything from [FfiConverter] for all Uniffi tags
/// ::uniffi::derive_ffi_traits!(blanket Foo)
/// // Derive everything from [FfiConverter] for the local crate::UniFfiTag
/// ::uniffi::derive_ffi_traits!(local Foo)
/// // To derive a specific trait, write out the impl item minus the actual block
/// ::uniffi::derive_ffi_traits!(impl<T, UT> LowerReturn<UT> for Option<T>)
/// ```
#[macro_export]
#[allow(clippy::crate_in_macro_def)]
macro_rules! derive_ffi_traits {
(blanket $ty:ty) => {
$crate::derive_ffi_traits!(impl<UT> Lower<UT> for $ty);
$crate::derive_ffi_traits!(impl<UT> Lift<UT> for $ty);
$crate::derive_ffi_traits!(impl<UT> LowerReturn<UT> for $ty);
$crate::derive_ffi_traits!(impl<UT> LowerError<UT> for $ty);
$crate::derive_ffi_traits!(impl<UT> LiftReturn<UT> for $ty);
$crate::derive_ffi_traits!(impl<UT> LiftRef<UT> for $ty);
$crate::derive_ffi_traits!(impl<UT> ConvertError<UT> for $ty);
$crate::derive_ffi_traits!(impl<UT> TypeId<UT> for $ty);
};
(local $ty:ty) => {
$crate::derive_ffi_traits!(impl Lower<crate::UniFfiTag> for $ty);
$crate::derive_ffi_traits!(impl Lift<crate::UniFfiTag> for $ty);
$crate::derive_ffi_traits!(impl LowerReturn<crate::UniFfiTag> for $ty);
$crate::derive_ffi_traits!(impl LowerError<crate::UniFfiTag> for $ty);
$crate::derive_ffi_traits!(impl LiftReturn<crate::UniFfiTag> for $ty);
$crate::derive_ffi_traits!(impl LiftRef<crate::UniFfiTag> for $ty);
$crate::derive_ffi_traits!(impl ConvertError<crate::UniFfiTag> for $ty);
$crate::derive_ffi_traits!(impl TypeId<crate::UniFfiTag> for $ty);
};
(impl $(<$($generic:ident),*>)? $(::uniffi::)? Lower<$ut:path> for $ty:ty $(where $($where:tt)*)?) => {
unsafe impl $(<$($generic),*>)* $crate::Lower<$ut> for $ty $(where $($where)*)*
{
type FfiType = <Self as $crate::FfiConverter<$ut>>::FfiType;
fn lower(obj: Self) -> Self::FfiType {
<Self as $crate::FfiConverter<$ut>>::lower(obj)
}
fn write(obj: Self, buf: &mut ::std::vec::Vec<u8>) {
<Self as $crate::FfiConverter<$ut>>::write(obj, buf)
}
}
};
(impl $(<$($generic:ident),*>)? $(::uniffi::)? Lift<$ut:path> for $ty:ty $(where $($where:tt)*)?) => {
unsafe impl $(<$($generic),*>)* $crate::Lift<$ut> for $ty $(where $($where)*)*
{
type FfiType = <Self as $crate::FfiConverter<$ut>>::FfiType;
fn try_lift(v: Self::FfiType) -> $crate::deps::anyhow::Result<Self> {
<Self as $crate::FfiConverter<$ut>>::try_lift(v)
}
fn try_read(buf: &mut &[u8]) -> $crate::deps::anyhow::Result<Self> {
<Self as $crate::FfiConverter<$ut>>::try_read(buf)
}
}
};
(impl $(<$($generic:ident),*>)? $(::uniffi::)? LowerReturn<$ut:path> for $ty:ty $(where $($where:tt)*)?) => {
unsafe impl $(<$($generic),*>)* $crate::LowerReturn<$ut> for $ty $(where $($where)*)*
{
type ReturnType = <Self as $crate::Lower<$ut>>::FfiType;
fn lower_return(v: Self) -> $crate::deps::anyhow::Result<Self::ReturnType, $crate::RustCallError> {
::std::result::Result::Ok(<Self as $crate::Lower<$ut>>::lower(v))
}
}
};
(impl $(<$($generic:ident),*>)? $(::uniffi::)? LowerError<$ut:path> for $ty:ty $(where $($where:tt)*)?) => {
unsafe impl $(<$($generic),*>)* $crate::LowerError<$ut> for $ty $(where $($where)*)*
{
fn lower_error(obj: Self) -> $crate::RustBuffer {
<Self as $crate::Lower<$ut>>::lower_into_rust_buffer(obj)
}
}
};
(impl $(<$($generic:ident),*>)? $(::uniffi::)? LiftReturn<$ut:path> for $ty:ty $(where $($where:tt)*)?) => {
unsafe impl $(<$($generic),*>)* $crate::LiftReturn<$ut> for $ty $(where $($where)*)*
{
type ReturnType = <Self as $crate::Lift<$ut>>::FfiType;
fn try_lift_successful_return(v: Self::ReturnType) -> $crate::Result<Self> {
<Self as $crate::Lift<$ut>>::try_lift(v)
}
}
};
(impl $(<$($generic:ident),*>)? $(::uniffi::)? LiftRef<$ut:path> for $ty:ty $(where $($where:tt)*)?) => {
unsafe impl $(<$($generic),*>)* $crate::LiftRef<$ut> for $ty $(where $($where)*)*
{
type LiftType = Self;
}
};
(impl $(<$($generic:ident),*>)? $(::uniffi::)? ConvertError<$ut:path> for $ty:ty $(where $($where:tt)*)?) => {
impl $(<$($generic),*>)* $crate::ConvertError<$ut> for $ty $(where $($where)*)*
{
fn try_convert_unexpected_callback_error(e: $crate::UnexpectedUniFFICallbackError) -> $crate::deps::anyhow::Result<Self> {
$crate::convert_unexpected_error!(e, $ty)
}
}
};
(impl $(<$($generic:ident),*>)? $(::uniffi::)? HandleAlloc<$ut:path> for $ty:ty $(where $($where:tt)*)?) => {
// Derived HandleAlloc implementation.
//
// This is only needed for !Sized types like `dyn Trait`, below is a blanket implementation
// for any sized type.
unsafe impl $(<$($generic),*>)* $crate::HandleAlloc<$ut> for $ty $(where $($where)*)*
{
// To implement HandleAlloc for an unsized type, wrap it with a second Arc which
// converts the wide pointer into a normal pointer.
fn new_handle(value: ::std::sync::Arc<Self>) -> $crate::Handle {
$crate::Handle::from_pointer(::std::sync::Arc::into_raw(::std::sync::Arc::new(value)))
}
unsafe fn clone_handle(handle: $crate::Handle) -> $crate::Handle {
::std::sync::Arc::<::std::sync::Arc<Self>>::increment_strong_count(handle.as_pointer::<::std::sync::Arc<Self>>());
handle
}
unsafe fn consume_handle(handle: $crate::Handle) -> ::std::sync::Arc<Self> {
::std::sync::Arc::<Self>::clone(
&std::sync::Arc::<::std::sync::Arc::<Self>>::from_raw(handle.as_pointer::<::std::sync::Arc<Self>>())
)
}
}
};
(impl $(<$($generic:ident),*>)? $(::uniffi::)? TypeId<$ut:path> for $ty:ty $(where $($where:tt)*)?) => {
impl $(<$($generic),*>)* $crate::TypeId<$ut> for $ty $(where $($where)*)*
{
const TYPE_ID_META: $crate::MetadataBuffer = <Self as $crate::FfiConverter<$ut>>::TYPE_ID_META;
}
};
}
unsafe impl<T: Send + Sync, UT> HandleAlloc<UT> for T {
fn new_handle(value: Arc<Self>) -> Handle {
Handle::from_pointer(Arc::into_raw(value))
}
unsafe fn clone_handle(handle: Handle) -> Handle {
Arc::increment_strong_count(handle.as_pointer::<T>());
handle
}
unsafe fn consume_handle(handle: Handle) -> Arc<Self> {
Arc::from_raw(handle.as_pointer())
}
}