Revision control
Copy as Markdown
Other Tools
//! # Scroll
//!
//! ```text, no_run
//! _______________
//! ()==( (@==()
//! '______________'|
//! | |
//! | ἀρετή |
//! __)_____________|
//! ()==( (@==()
//! '--------------'
//!
//! ```
//!
//! Scroll is a library for easily and efficiently reading/writing types from data containers like
//! byte arrays.
//!
//! ## Easily:
//!
//! Scroll sets down a number of traits:
//!
//! [FromCtx](ctx/trait.FromCtx.html), [IntoCtx](ctx/trait.IntoCtx.html),
//! [TryFromCtx](ctx/trait.TryFromCtx.html) and [TryIntoCtx](ctx/trait.TryIntoCtx.html) — further
//! explained in the [ctx module](ctx/index.html); to be implemented on custom types to allow
//! reading, writing, and potentially fallible reading/writing respectively.
//!
//! [Pread](trait.Pread.html) and [Pwrite](trait.Pwrite.html) which are implemented on data
//! containers such as byte arrays to define how to read or respectively write types implementing
//! the *Ctx traits above.
//! In addition scroll also defines [IOread](trait.IOread.html) and
//! [IOwrite](trait.IOwrite.html) with additional constraits that then allow reading and writing
//!
//!
//! defaults for `Pread`, `Pwrite`, their IO counterpart and `SizeWith`. More complex situations
//! call for manual implementation of those traits; refer to [the ctx module](ctx/index.html) for
//! details.
//!
//!
//! ## Efficiently:
//!
//! zero-copy. Scroll is designed with a `no_std` context in mind; every dependency on `std` is
//! cfg-gated and errors need not allocate.
//!
//! Reads by default take only immutable references wherever possible, allowing for trivial
//! parallelization.
//!
//! # Examples
//!
//! Let's start with a simple example
//!
//! ```rust
//! use scroll::{ctx, Pread};
//!
//! // Let's first define some data, cfg-gated so our assertions later on hold.
//! #[cfg(target_endian = "little")]
//! let bytes: [u8; 4] = [0xde, 0xad, 0xbe, 0xef];
//! #[cfg(target_endian = "big")]
//! let bytes: [u8; 4] = [0xef, 0xbe, 0xad, 0xde];
//!
//! // We can read a u32 from the array `bytes` at offset 0.
//! // This will use a default context for the type being parsed;
//! // in the case of u32 this defines to use the host's endianess.
//! let number = bytes.pread::<u32>(0).unwrap();
//! assert_eq!(number, 0xefbeadde);
//!
//!
//! // Similarly we can also read a single byte at offset 2
//! // This time using type ascription instead of the turbofish (::<>) operator.
//! let byte: u8 = bytes.pread(2).unwrap();
//! #[cfg(target_endian = "little")]
//! assert_eq!(byte, 0xbe);
//! #[cfg(target_endian = "big")]
//! assert_eq!(byte, 0xad);
//!
//!
//! // If required we can also provide a specific parsing context; e.g. if we want to explicitly
//! // define the endianess to use:
//! let be_number: u32 = bytes.pread_with(0, scroll::BE).unwrap();
//! #[cfg(target_endian = "little")]
//! assert_eq!(be_number, 0xdeadbeef);
//! #[cfg(target_endian = "big")]
//! assert_eq!(be_number, 0xefbeadde);
//!
//! let be_number16 = bytes.pread_with::<u16>(1, scroll::BE).unwrap();
//! #[cfg(target_endian = "little")]
//! assert_eq!(be_number16, 0xadbe);
//! #[cfg(target_endian = "big")]
//! assert_eq!(be_number16, 0xbead);
//!
//!
//! // Reads may fail; in this example due to a too large read for the given container.
//! // Scroll's error type does not by default allocate to work in environments like no_std.
//! let byte_err: scroll::Result<i64> = bytes.pread(0);
//! assert!(byte_err.is_err());
//!
//!
//! // We can parse out custom datatypes, or types with lifetimes, as long as they implement
//! // the conversion traits `TryFromCtx/FromCtx`.
//! // Here we use the default context for &str which parses are C-style '\0'-delimited string.
//! let hello: &[u8] = b"hello world\0more words";
//! let hello_world: &str = hello.pread(0).unwrap();
//! assert_eq!("hello world", hello_world);
//!
//! // We can again provide a custom context; for example to parse Space-delimited strings.
//! // As you can see while we still call `pread` changing the context can influence the output —
//! // instead of splitting at '\0' we split at spaces
//! let hello2: &[u8] = b"hello world\0more words";
//! let world: &str = hello2.pread_with(6, ctx::StrCtx::Delimiter(ctx::SPACE)).unwrap();
//! assert_eq!("world\0more", world);
//! ```
//!
//! ## `std::io` API
//!
//! Scroll also allows reading from `std::io`. For this the types to read need to implement
//! [FromCtx](ctx/trait.FromCtx.html) and [SizeWith](ctx/trait.SizeWith.html).
//!
//! ```rust
//! ##[cfg(feature = "std")] {
//! use std::io::Cursor;
//! use scroll::{IOread, ctx, Endian};
//! let bytes = [0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0xef,0xbe,0x00,0x00,];
//! let mut cursor = Cursor::new(bytes);
//!
//! // IOread uses std::io::Read methods, thus the Cursor will be incremented on these reads:
//! let prev = cursor.position();
//!
//! let integer = cursor.ioread_with::<u64>(Endian::Little).unwrap();
//!
//! let after = cursor.position();
//!
//! assert!(prev < after);
//!
//! // SizeWith allows us to define a context-sensitive size of a read type:
//! // Contexts can have different instantiations; e.g. the `Endian` context can be either Little or
//! // Big. This is useful if for example the context contains the word-size of fields to be
//! // read/written, e.g. switching between ELF32 or ELF64 at runtime.
//! let size = <u64 as ctx::SizeWith<Endian>>::size_with(&Endian::Little) as u64;
//! assert_eq!(prev + size, after);
//! # }
//! ```
//!
//! In the same vein as IOread we can use IOwrite to write a type to anything implementing
//! `std::io::Write`:
//!
//! ```rust
//! ##[cfg(feature = "std")] {
//! use std::io::Cursor;
//! use scroll::{IOwrite};
//!
//! let mut bytes = [0x0u8; 5];
//! let mut cursor = Cursor::new(&mut bytes[..]);
//!
//! // This of course once again increments the cursor position
//! cursor.iowrite_with(0xdeadbeef as u32, scroll::BE).unwrap();
//!
//! assert_eq!(cursor.into_inner(), [0xde, 0xad, 0xbe, 0xef, 0x0]);
//! # }
//! ```
//!
//! ## Complex use cases
//!
//! Scoll is designed to be highly adaptable while providing a strong abstraction between the types
//! being read/written and the data container containing them.
//!
//! In this example we'll define a custom Data and allow it to be read from an arbitrary byte
//! buffer.
//!
//! ```rust
//! use scroll::{self, ctx, Pread, Endian};
//! use scroll::ctx::StrCtx;
//!
//! // Our custom context type. In a more complex situation you could for example store details on
//! // how to write or read your type, field-sizes or other information.
//! // In this simple example we could also do without using a custom context in the first place.
//! #[derive(Copy, Clone)]
//! struct Context(Endian);
//!
//! // Our custom data type
//! struct Data<'zerocopy> {
//! // This is only a reference to the actual data; we make use of scroll's zero-copy capability
//! name: &'zerocopy str,
//! id: u32,
//! }
//!
//! // To allow for safe zero-copying scroll allows to specify lifetimes explicitly:
//! // The context
//! impl<'a> ctx::TryFromCtx<'a, Context> for Data<'a> {
//! // If necessary you can set a custom error type here, which will be returned by Pread/Pwrite
//! type Error = scroll::Error;
//!
//! // Using the explicit lifetime specification again you ensure that read data doesn't outlife
//! // its source buffer without having to resort to copying.
//! fn try_from_ctx (src: &'a [u8], ctx: Context)
//! // the `usize` returned here is the amount of bytes read.
//! -> Result<(Self, usize), Self::Error>
//! {
//! let offset = &mut 0;
//!
//! let id = src.gread_with(offset, ctx.0)?;
//!
//! // In a more serious application you would validate data here of course.
//! let namelen: u16 = src.gread_with(offset, ctx.0)?;
//! let name = src.gread_with::<&str>(offset, StrCtx::Length(namelen as usize))?;
//!
//! Ok((Data { name: name, id: id }, *offset))
//! }
//! }
//!
//! // In lieu of a complex byte buffer we hearken back to a simple &[u8]; the default source
//! // of TryFromCtx. However, any type that implements Pread to produce a &[u8] can now read
//! // `Data` thanks to it's implementation of TryFromCtx.
//! let bytes = b"\x01\x02\x03\x04\x00\x08UserName";
//! let data: Data = bytes.pread_with(0, Context(Endian::Big)).unwrap();
//!
//! assert_eq!(data.id, 0x01020304);
//! assert_eq!(data.name.to_string(), "UserName".to_string());
//! ```
//!
//! For further explanation of the traits and how to implement them manually refer to
//! [Pread](trait.Pread.html) and [TryFromCtx](ctx/trait.TryFromCtx.html).
#![cfg_attr(not(feature = "std"), no_std)]
#[cfg(feature = "derive")]
#[allow(unused_imports)]
pub use scroll_derive::{IOread, IOwrite, Pread, Pwrite, SizeWith};
#[cfg(feature = "std")]
extern crate core;
pub mod ctx;
mod endian;
mod error;
mod greater;
mod leb128;
#[cfg(feature = "std")]
mod lesser;
mod pread;
mod pwrite;
pub use crate::endian::*;
pub use crate::error::*;
pub use crate::greater::*;
pub use crate::leb128::*;
#[cfg(feature = "std")]
pub use crate::lesser::*;
pub use crate::pread::*;
pub use crate::pwrite::*;
#[doc(hidden)]
pub mod export {
pub use ::core::{mem, result};
}
#[allow(unused)]
macro_rules! doc_comment {
($x:expr) => {
#[doc = $x]
#[doc(hidden)]
mod readme_tests {}
};
}
#[cfg(feature = "derive")]
doc_comment!(include_str!("../README.md"));
#[cfg(test)]
mod tests {
use super::LE;
#[test]
fn test_measure_with_bytes() {
use super::ctx::MeasureWith;
let bytes: [u8; 4] = [0xef, 0xbe, 0xad, 0xde];
assert_eq!(bytes.measure_with(&()), 4);
}
#[test]
fn test_measurable() {
use super::ctx::SizeWith;
assert_eq!(8, u64::size_with(&LE));
}
//////////////////////////////////////////////////////////////
// begin pread_with
//////////////////////////////////////////////////////////////
macro_rules! pwrite_test {
($write:ident, $read:ident, $deadbeef:expr) => {
#[test]
fn $write() {
use super::{Pread, Pwrite, BE};
let mut bytes: [u8; 8] = [0, 0, 0, 0, 0, 0, 0, 0];
let b = &mut bytes[..];
b.pwrite_with::<$read>($deadbeef, 0, LE).unwrap();
assert_eq!(b.pread_with::<$read>(0, LE).unwrap(), $deadbeef);
b.pwrite_with::<$read>($deadbeef, 0, BE).unwrap();
assert_eq!(b.pread_with::<$read>(0, BE).unwrap(), $deadbeef);
}
};
}
pwrite_test!(pwrite_and_pread_roundtrip_u16, u16, 0xbeef);
pwrite_test!(pwrite_and_pread_roundtrip_i16, i16, 0x7eef);
pwrite_test!(pwrite_and_pread_roundtrip_u32, u32, 0xbeefbeef);
pwrite_test!(pwrite_and_pread_roundtrip_i32, i32, 0x7eefbeef);
pwrite_test!(pwrite_and_pread_roundtrip_u64, u64, 0xbeefbeef7eef7eef);
pwrite_test!(pwrite_and_pread_roundtrip_i64, i64, 0x7eefbeef7eef7eef);
#[test]
fn pread_with_be() {
use super::Pread;
let bytes: [u8; 2] = [0x7e, 0xef];
let b = &bytes[..];
let byte: u16 = b.pread_with(0, super::BE).unwrap();
assert_eq!(0x7eef, byte);
let bytes: [u8; 2] = [0xde, 0xad];
let dead: u16 = bytes.pread_with(0, super::BE).unwrap();
assert_eq!(0xdead, dead);
}
#[test]
fn pread() {
use super::Pread;
let bytes: [u8; 2] = [0x7e, 0xef];
let b = &bytes[..];
let byte: u16 = b.pread(0).unwrap();
#[cfg(target_endian = "little")]
assert_eq!(0xef7e, byte);
#[cfg(target_endian = "big")]
assert_eq!(0x7eef, byte);
}
#[test]
fn pread_slice() {
use super::ctx::StrCtx;
use super::Pread;
let bytes: [u8; 2] = [0x7e, 0xef];
let b = &bytes[..];
let iserr: Result<&str, _> = b.pread_with(0, StrCtx::Length(3));
assert!(iserr.is_err());
// let bytes2: &[u8] = b.pread_with(0, 2).unwrap();
// assert_eq!(bytes2.len(), bytes[..].len());
// for i in 0..bytes2.len() {
// assert_eq!(bytes2[i], bytes[i])
// }
}
#[test]
fn pread_str() {
use super::ctx::*;
use super::Pread;
let bytes: [u8; 2] = [0x2e, 0x0];
let b = &bytes[..];
let s: &str = b.pread(0).unwrap();
#[cfg(feature = "std")]
println!("str: {s}");
assert_eq!(s.len(), bytes[..].len() - 1);
let bytes: &[u8] = b"hello, world!\0some_other_things";
let hello_world: &str = bytes.pread_with(0, StrCtx::Delimiter(NULL)).unwrap();
#[cfg(feature = "std")]
println!("{hello_world:?}");
assert_eq!(hello_world.len(), 13);
let hello: &str = bytes.pread_with(0, StrCtx::Delimiter(SPACE)).unwrap();
#[cfg(feature = "std")]
println!("{hello:?}");
assert_eq!(hello.len(), 6);
// this could result in underflow so we just try it
let _error = bytes.pread_with::<&str>(6, StrCtx::Delimiter(SPACE));
let error = bytes.pread_with::<&str>(7, StrCtx::Delimiter(SPACE));
#[cfg(feature = "std")]
println!("{error:?}");
assert!(error.is_ok());
}
/// In this test, we are testing preading
/// at length boundaries.
/// In the past, this test was supposed to test failures for `hello_world`.
/// Since PR#94, this test is unwrapping as we exploit
/// the fact that if you do &x[x.len()..] you get an empty slice.
#[test]
fn pread_str_weird() {
use super::ctx::*;
use super::Pread;
let bytes: &[u8] = b"";
let hello_world = bytes.pread_with::<&str>(0, StrCtx::Delimiter(NULL));
#[cfg(feature = "std")]
println!("1 {hello_world:?}");
assert!(hello_world.unwrap().is_empty());
let error = bytes.pread_with::<&str>(7, StrCtx::Delimiter(SPACE));
#[cfg(feature = "std")]
println!("2 {error:?}");
assert!(error.is_err());
let bytes: &[u8] = b"\0";
let null = bytes.pread::<&str>(0).unwrap();
#[cfg(feature = "std")]
println!("3 {null:?}");
assert_eq!(null.len(), 0);
}
#[test]
fn pwrite_str_and_bytes() {
use super::ctx::*;
use super::{Pread, Pwrite};
let astring: &str = "lol hello_world lal\0ala imabytes";
let mut buffer = [0u8; 33];
buffer.pwrite(astring, 0).unwrap();
{
let hello_world = buffer
.pread_with::<&str>(4, StrCtx::Delimiter(SPACE))
.unwrap();
assert_eq!(hello_world, "hello_world");
}
let bytes: &[u8] = b"more\0bytes";
buffer.pwrite(bytes, 0).unwrap();
let more = bytes
.pread_with::<&str>(0, StrCtx::Delimiter(NULL))
.unwrap();
assert_eq!(more, "more");
let bytes = bytes
.pread_with::<&str>(more.len() + 1, StrCtx::Delimiter(NULL))
.unwrap();
assert_eq!(bytes, "bytes");
}
use core::fmt::{self, Display};
#[derive(Debug)]
pub struct ExternalError {}
impl Display for ExternalError {
fn fmt(&self, fmt: &mut fmt::Formatter) -> fmt::Result {
write!(fmt, "ExternalError")
}
}
#[cfg(feature = "std")]
impl std::error::Error for ExternalError {
fn description(&self) -> &str {
"ExternalError"
}
fn cause(&self) -> Option<&dyn std::error::Error> {
None
}
}
impl From<super::Error> for ExternalError {
fn from(err: super::Error) -> Self {
//use super::Error::*;
match err {
_ => ExternalError {},
}
}
}
#[derive(Debug, PartialEq, Eq)]
pub struct Foo(u16);
impl super::ctx::TryIntoCtx<super::Endian> for Foo {
type Error = ExternalError;
fn try_into_ctx(self, this: &mut [u8], le: super::Endian) -> Result<usize, Self::Error> {
use super::Pwrite;
if this.len() < 2 {
return Err(ExternalError {});
}
this.pwrite_with(self.0, 0, le)?;
Ok(2)
}
}
impl<'a> super::ctx::TryFromCtx<'a, super::Endian> for Foo {
type Error = ExternalError;
fn try_from_ctx(this: &'a [u8], le: super::Endian) -> Result<(Self, usize), Self::Error> {
use super::Pread;
if this.len() > 2 {
return Err(ExternalError {});
}
let n = this.pread_with(0, le)?;
Ok((Foo(n), 2))
}
}
#[test]
fn pread_with_iter_bytes() {
use super::Pread;
let mut bytes_to: [u8; 8] = [0, 0, 0, 0, 0, 0, 0, 0];
let bytes_from: [u8; 8] = [1, 2, 3, 4, 5, 6, 7, 8];
let bytes_to = &mut bytes_to[..];
let bytes_from = &bytes_from[..];
for i in 0..bytes_from.len() {
bytes_to[i] = bytes_from.pread(i).unwrap();
}
assert_eq!(bytes_to, bytes_from);
}
//////////////////////////////////////////////////////////////
// end pread_with
//////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////
// begin gread_with
//////////////////////////////////////////////////////////////
macro_rules! g_test {
($read:ident, $deadbeef:expr, $typ:ty) => {
#[test]
fn $read() {
use super::Pread;
let bytes: [u8; 8] = [0xf, 0xe, 0xe, 0xb, 0xd, 0xa, 0xe, 0xd];
let mut offset = 0;
let deadbeef: $typ = bytes.gread_with(&mut offset, LE).unwrap();
assert_eq!(deadbeef, $deadbeef as $typ);
assert_eq!(offset, ::core::mem::size_of::<$typ>());
}
};
}
g_test!(simple_gread_u16, 0xe0f, u16);
g_test!(simple_gread_u32, 0xb0e0e0f, u32);
g_test!(simple_gread_u64, 0xd0e0a0d0b0e0e0f, u64);
g_test!(simple_gread_i64, 940700423303335439, i64);
macro_rules! simple_float_test {
($read:ident, $deadbeef:expr, $typ:ty) => {
#[test]
fn $read() {
use super::Pread;
let bytes: [u8; 8] = [0u8, 0, 0, 0, 0, 0, 224, 63];
let mut offset = 0;
let deadbeef: $typ = bytes.gread_with(&mut offset, LE).unwrap();
assert_eq!(deadbeef, $deadbeef as $typ);
assert_eq!(offset, ::core::mem::size_of::<$typ>());
}
};
}
simple_float_test!(gread_f32, 0.0, f32);
simple_float_test!(gread_f64, 0.5, f64);
macro_rules! g_read_write_test {
($read:ident, $val:expr, $typ:ty) => {
#[test]
fn $read() {
use super::{Pread, Pwrite, BE, LE};
let mut buffer = [0u8; 16];
let offset = &mut 0;
buffer.gwrite_with($val.clone(), offset, LE).unwrap();
let o2 = &mut 0;
let val: $typ = buffer.gread_with(o2, LE).unwrap();
assert_eq!(val, $val);
assert_eq!(*offset, ::core::mem::size_of::<$typ>());
assert_eq!(*o2, ::core::mem::size_of::<$typ>());
assert_eq!(*o2, *offset);
buffer.gwrite_with($val.clone(), offset, BE).unwrap();
let val: $typ = buffer.gread_with(o2, BE).unwrap();
assert_eq!(val, $val);
}
};
}
g_read_write_test!(gread_gwrite_f64_1, 0.25f64, f64);
g_read_write_test!(gread_gwrite_f64_2, 0.5f64, f64);
g_read_write_test!(gread_gwrite_f64_3, 0.064, f64);
g_read_write_test!(gread_gwrite_f32_1, 0.25f32, f32);
g_read_write_test!(gread_gwrite_f32_2, 0.5f32, f32);
g_read_write_test!(gread_gwrite_f32_3, 0.0f32, f32);
g_read_write_test!(gread_gwrite_i64_1, 0i64, i64);
g_read_write_test!(gread_gwrite_i64_2, -1213213211111i64, i64);
g_read_write_test!(gread_gwrite_i64_3, -3000i64, i64);
g_read_write_test!(gread_gwrite_i32_1, 0i32, i32);
g_read_write_test!(gread_gwrite_i32_2, -1213213232, i32);
g_read_write_test!(gread_gwrite_i32_3, -3000i32, i32);
// useful for ferreting out problems with impls
#[test]
fn gread_with_iter_bytes() {
use super::Pread;
let mut bytes_to: [u8; 8] = [0, 0, 0, 0, 0, 0, 0, 0];
let bytes_from: [u8; 8] = [1, 2, 3, 4, 5, 6, 7, 8];
let bytes_to = &mut bytes_to[..];
let bytes_from = &bytes_from[..];
let mut offset = &mut 0;
for i in 0..bytes_from.len() {
bytes_to[i] = bytes_from.gread(&mut offset).unwrap();
}
assert_eq!(bytes_to, bytes_from);
assert_eq!(*offset, bytes_to.len());
}
#[test]
fn gread_inout() {
use super::Pread;
let mut bytes_to: [u8; 8] = [0, 0, 0, 0, 0, 0, 0, 0];
let bytes_from: [u8; 8] = [1, 2, 3, 4, 5, 6, 7, 8];
let bytes = &bytes_from[..];
let offset = &mut 0;
bytes.gread_inout(offset, &mut bytes_to[..]).unwrap();
assert_eq!(bytes_to, bytes_from);
assert_eq!(*offset, bytes_to.len());
}
#[test]
fn gread_with_byte() {
use super::Pread;
let bytes: [u8; 1] = [0x7f];
let b = &bytes[..];
let offset = &mut 0;
let byte: u8 = b.gread(offset).unwrap();
assert_eq!(0x7f, byte);
assert_eq!(*offset, 1);
}
#[test]
fn gread_slice() {
use super::ctx::StrCtx;
use super::Pread;
let bytes: [u8; 2] = [0x7e, 0xef];
let b = &bytes[..];
let offset = &mut 0;
let res = b.gread_with::<&str>(offset, StrCtx::Length(3));
assert!(res.is_err());
*offset = 0;
let astring: [u8; 3] = [0x45, 0x42, 0x44];
let string = astring.gread_with::<&str>(offset, StrCtx::Length(2));
match &string {
Ok(_) => {}
Err(_err) => {
#[cfg(feature = "std")]
println!("{_err}");
panic!();
}
}
assert_eq!(string.unwrap(), "EB");
*offset = 0;
let bytes2: &[u8] = b.gread_with(offset, 2).unwrap();
assert_eq!(*offset, 2);
assert_eq!(bytes2.len(), bytes[..].len());
for i in 0..bytes2.len() {
assert_eq!(bytes2[i], bytes[i])
}
}
/////////////////////////////////////////////////////////////////
// end gread_with
/////////////////////////////////////////////////////////////////
}