Revision control
Copy as Markdown
Other Tools
// Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
// option. This file may not be copied, modified, or distributed
// except according to those terms.
use std::{
cell::RefCell,
fmt::{Debug, Display},
iter, mem,
net::SocketAddr,
rc::Rc,
time::Instant,
};
use neqo_common::{
event::Provider as EventProvider, hex, hex_with_len, qdebug, qinfo, qlog::NeqoQlog, qtrace,
Datagram, Decoder, Encoder, Header, MessageType, Role,
};
use neqo_crypto::{agent::CertificateInfo, AuthenticationStatus, ResumptionToken, SecretAgentInfo};
use neqo_qpack::Stats as QpackStats;
use neqo_transport::{
streams::SendOrder, AppError, Connection, ConnectionEvent, ConnectionId, ConnectionIdGenerator,
DatagramTracking, Output, RecvStreamStats, SendStreamStats, Stats as TransportStats, StreamId,
StreamType, Version, ZeroRttState,
};
use crate::{
client_events::{Http3ClientEvent, Http3ClientEvents},
connection::{Http3Connection, Http3State, RequestDescription},
frames::HFrame,
push_controller::{PushController, RecvPushEvents},
recv_message::{RecvMessage, RecvMessageInfo},
request_target::AsRequestTarget,
settings::HSettings,
Error, Http3Parameters, Http3StreamType, NewStreamType, Priority, PriorityHandler,
ReceiveOutput, Res,
};
// This is used for filtering send_streams and recv_Streams with a stream_ids greater than or equal
// a given id. Only the same type (bidirectional or unidirectionsl) streams are filtered.
fn id_gte<U>(base: StreamId) -> impl FnMut((&StreamId, &U)) -> Option<StreamId> + 'static
where
U: ?Sized,
{
move |(id, _)| {
if *id >= base && !(id.is_bidi() ^ base.is_bidi()) {
Some(*id)
} else {
None
}
}
}
const fn alpn_from_quic_version(version: Version) -> &'static str {
match version {
Version::Version2 | Version::Version1 => "h3",
Version::Draft29 => "h3-29",
Version::Draft30 => "h3-30",
Version::Draft31 => "h3-31",
Version::Draft32 => "h3-32",
}
}
/// # The HTTP/3 client API
///
/// This module implements the HTTP/3 client API. The main implementation of the protocol is in
/// implements common behavior for the client-side and the server-side. `Http3Client` structure
/// implements the public API and set of functions that differ between the client and the server.
///
/// The API is used for:
/// - create and close an endpoint:
/// - [`Http3Client::new`]
/// - [`Http3Client::new_with_conn`]
/// - [`Http3Client::close`]
/// - configuring an endpoint:
/// - [`Http3Client::authenticated`]
/// - [`Http3Client::enable_ech`]
/// - [`Http3Client::enable_resumption`]
/// - [`Http3Client::initiate_key_update`]
/// - [`Http3Client::set_qlog`]
/// - retrieving information about a connection:
/// - [`Http3Client::peer_certificate`]
/// - [`Http3Client::qpack_decoder_stats`]
/// - [`Http3Client::qpack_encoder_stats`]
/// - [`Http3Client::transport_stats`]
/// - [`Http3Client::state`]
/// - [`Http3Client::take_resumption_token`]
/// - [`Http3Client::tls_info`]
/// - driving HTTP/3 session:
/// - [`Http3Client::process_output`]
/// - [`Http3Client::process_input`]
/// - [`Http3Client::process`]
/// - create requests, send/receive data, and cancel requests:
/// - [`Http3Client::fetch`]
/// - [`Http3Client::send_data`]
/// - [`Http3Client::read_data`]
/// - [`Http3Client::stream_close_send`]
/// - [`Http3Client::cancel_fetch`]
/// - [`Http3Client::stream_reset_send`]
/// - [`Http3Client::stream_stop_sending`]
/// - [`Http3Client::set_stream_max_data`]
/// - priority feature:
/// - [`Http3Client::priority_update`]
/// - `WebTransport` feature:
/// - [`Http3Client::webtransport_create_session`]
/// - [`Http3Client::webtransport_close_session`]
/// - [`Http3Client::webtransport_create_stream`]
/// - [`Http3Client::webtransport_enabled`]
///
/// ## Examples
///
/// ### Fetching a resource
///
/// ```ignore
/// let mut client = Http3Client::new(...);
///
/// // Perform a handshake
/// ...
///
/// let req = client
/// .fetch(
/// Instant::now(),
/// "GET",
/// &("https", "something.com", "/"),
/// &[Header::new("example1", "value1"), Header::new("example1", "value2")],
/// Priority::default(),
/// )
/// .unwrap();
///
/// client.stream_close_send(req).unwrap();
///
/// loop {
/// // exchange packets
/// ...
///
/// while let Some(event) = client.next_event() {
/// match event {
/// Http3ClientEvent::HeaderReady { stream_id, headers, interim, fin } => {
/// println!("New response headers received for stream {:?} [fin={?}, interim={:?}]: {:?}",
/// stream_id,
/// fin,
/// interim,
/// headers,
/// );
/// }
/// Http3ClientEvent::DataReadable { stream_id } => {
/// println!("New data available on stream {}", stream_id);
/// let mut buf = [0; 100];
/// let (amount, fin) = client.read_data(now(), stream_id, &mut buf).unwrap();
/// println!("Read {:?} bytes from stream {:?} [fin={?}]",
/// amount,
/// stream_id,
/// fin,
/// );
/// }
/// _ => {
/// println!("Unhandled event {:?}", event);
/// }
/// }
/// }
/// }
/// ```
///
/// ### Creating a `WebTransport` session
///
/// ```ignore
/// let mut client = Http3Client::new(...);
///
/// // Perform a handshake
/// ...
///
/// // Create a session
/// let wt_session_id = client
/// .webtransport_create_session(now(), &("https", "something.com", "/"), &[])
/// .unwrap();
///
/// loop {
/// // exchange packets
/// ...
///
/// while let Some(event) = client.next_event() {
/// match event {
/// Http3ClientEvent::WebTransport(WebTransportEvent::Session{
/// stream_id,
/// status,
/// ..
/// }) => {
/// println!("The response from the server: WebTransport session ID {:?} status={:?}",
/// stream_id,
/// status,
/// );
/// }
/// _ => {
/// println!("Unhandled event {:?}", event);
/// }
/// }
/// }
/// }
/// ```
///
/// ### `WebTransport`: create a stream, send and receive data on the stream
///
/// ```ignore
/// const BUF_CLIENT: &[u8] = &[0; 10];
/// // wt_session_id is the session ID of a newly created WebTransport session, see the example above.
///
/// // create a stream
/// let wt_stream_id = client
/// .webtransport_create_stream(wt_session_id, StreamType::BiDi)
/// .unwrap();
///
/// // send data
/// let data_sent = client.send_data(wt_stream_id, BUF_CLIENT).unwrap();
/// assert_eq!(data_sent, BUF_CLIENT.len());
///
/// // close stream for sending
/// client.stream_close_send(wt_stream_id).unwrap();
///
/// // wait for data from the server
/// loop {
/// // exchange packets
/// ...
///
/// while let Some(event) = client.next_event() {
/// match event {
/// Http3ClientEvent::DataReadable{ stream_id } => {
/// println!("Data receivedd form the server on WebTransport stream ID {:?}",
/// stream_id,
/// );
/// let mut buf = [0; 100];
/// let (amount, fin) = client.read_data(now(), stream_id, &mut buf).unwrap();
/// println!("Read {:?} bytes from stream {:?} [fin={?}]",
/// amount,
/// stream_id,
/// fin,
/// );
/// }
/// _ => {
/// println!("Unhandled event {:?}", event);
/// }
/// }
/// }
/// }
/// ```
///
/// ### `WebTransport`: receive a new stream form the server
///
/// ```ignore
/// // wt_session_id is the session ID of a newly created WebTransport session, see the example above.
///
/// // wait for a new stream from the server
/// loop {
/// // exchange packets
/// ...
///
/// while let Some(event) = client.next_event() {
/// match event {
/// Http3ClientEvent::WebTransport(WebTransportEvent::NewStream {
/// stream_id,
/// session_id,
/// }) => {
/// println!("New stream received on session{:?}, stream id={:?} stream type={:?}",
/// sesson_id.stream_id(),
/// stream_id.stream_id(),
/// stream_id.stream_type()
/// );
/// }
/// Http3ClientEvent::DataReadable{ stream_id } => {
/// println!("Data receivedd form the server on WebTransport stream ID {:?}",
/// stream_id,
/// );
/// let mut buf = [0; 100];
/// let (amount, fin) = client.read_data(now(), stream_id, &mut buf).unwrap();
/// println!("Read {:?} bytes from stream {:?} [fin={:?}]",
/// amount,
/// stream_id,
/// fin,
/// );
/// }
/// _ => {
/// println!("Unhandled event {:?}", event);
/// }
/// }
/// }
/// }
/// ```
pub struct Http3Client {
conn: Connection,
base_handler: Http3Connection,
events: Http3ClientEvents,
push_handler: Rc<RefCell<PushController>>,
}
impl Display for Http3Client {
fn fmt(&self, f: &mut ::std::fmt::Formatter) -> ::std::fmt::Result {
write!(f, "Http3 client")
}
}
impl Http3Client {
/// # Errors
///
/// Making a `neqo-transport::connection` may produce an error. This can only be a crypto error
/// if the crypto context can't be created or configured.
pub fn new(
server_name: impl Into<String>,
cid_manager: Rc<RefCell<dyn ConnectionIdGenerator>>,
local_addr: SocketAddr,
remote_addr: SocketAddr,
http3_parameters: Http3Parameters,
now: Instant,
) -> Res<Self> {
Ok(Self::new_with_conn(
Connection::new_client(
server_name,
&[alpn_from_quic_version(
http3_parameters
.get_connection_parameters()
.get_versions()
.initial(),
)],
cid_manager,
local_addr,
remote_addr,
http3_parameters.get_connection_parameters().clone(),
now,
)?,
http3_parameters,
))
}
/// This is a similar function to `new`. In this case, `neqo-transport::connection` has been
/// already created.
///
/// It is recommended to use `new` instead.
#[must_use]
pub fn new_with_conn(c: Connection, http3_parameters: Http3Parameters) -> Self {
let events = Http3ClientEvents::default();
let webtransport = http3_parameters.get_webtransport();
let push_streams = http3_parameters.get_max_concurrent_push_streams();
let mut base_handler = Http3Connection::new(http3_parameters, Role::Client);
if webtransport {
base_handler.set_features_listener(events.clone());
}
Self {
conn: c,
events: events.clone(),
push_handler: Rc::new(RefCell::new(PushController::new(push_streams, events))),
base_handler,
}
}
#[must_use]
pub const fn role(&self) -> Role {
self.conn.role()
}
/// The function returns the current state of the connection.
#[must_use]
pub fn state(&self) -> Http3State {
self.base_handler.state()
}
#[must_use]
pub fn tls_info(&self) -> Option<&SecretAgentInfo> {
self.conn.tls_info()
}
/// Get the peer's certificate.
#[must_use]
pub fn peer_certificate(&self) -> Option<CertificateInfo> {
self.conn.peer_certificate()
}
/// This called when peer certificates have been verified.
///
/// `Http3ClientEvent::AuthenticationNeeded` event is emitted when peer’s certificates are
/// available and need to be verified. When the verification is completed this function is
/// called. To inform HTTP/3 session of the verification results.
pub fn authenticated(&mut self, status: AuthenticationStatus, now: Instant) {
self.conn.authenticated(status, now);
}
pub fn set_qlog(&mut self, qlog: NeqoQlog) {
self.conn.set_qlog(qlog);
}
/// Enable encrypted client hello (ECH).
///
/// # Errors
///
/// Fails when the configuration provided is bad.
pub fn enable_ech(&mut self, ech_config_list: impl AsRef<[u8]>) -> Res<()> {
self.conn.client_enable_ech(ech_config_list)?;
Ok(())
}
/// Get the connection id, which is useful for disambiguating connections to
/// the same origin.
///
/// # Panics
///
/// Never, because clients always have this field.
#[must_use]
pub fn connection_id(&self) -> &ConnectionId {
self.conn.odcid().expect("Client always has odcid")
}
fn encode_resumption_token(&self, token: &ResumptionToken) -> Option<ResumptionToken> {
self.base_handler.get_settings().map(|settings| {
let mut enc = Encoder::default();
settings.encode_frame_contents(&mut enc);
enc.encode(token.as_ref());
ResumptionToken::new(enc.into(), token.expiration_time())
})
}
/// The correct way to obtain a resumption token is to wait for the
/// `Http3ClientEvent::ResumptionToken` event. To emit the event we are waiting for a
/// resumtion token and a `NEW_TOKEN` frame to arrive. Some servers don't send `NEW_TOKEN`
/// frames and in this case, we wait for 3xPTO before emitting an event. This is especially a
/// problem for short-lived connections, where the connection is closed before any events are
/// released. This function retrieves the token, without waiting for a `NEW_TOKEN` frame to
/// arrive.
///
/// In addition to the token, HTTP/3 settings are encoded into the token before giving it to
/// the application(`encode_resumption_token`). When the resumption token is supplied to a new
/// connection the HTTP/3 setting will be decoded and used until the setting are received from
/// the server.
pub fn take_resumption_token(&mut self, now: Instant) -> Option<ResumptionToken> {
self.conn
.take_resumption_token(now)
.and_then(|t| self.encode_resumption_token(&t))
}
/// This may be call if an application has a resumption token. This must be called before
/// connection starts.
///
/// The resumption token also contains encoded HTTP/3 settings. The settings will be decoded
/// and used until the setting are received from the server.
///
/// # Errors
///
/// An error is return if token cannot be decoded or a connection is is a wrong state.
///
/// # Panics
///
/// On closing if the base handler can't handle it (debug only).
pub fn enable_resumption(&mut self, now: Instant, token: impl AsRef<[u8]>) -> Res<()> {
if self.base_handler.state != Http3State::Initializing {
return Err(Error::InvalidState);
}
let mut dec = Decoder::from(token.as_ref());
let Some(settings_slice) = dec.decode_vvec() else {
return Err(Error::InvalidResumptionToken);
};
qtrace!([self], " settings {}", hex_with_len(settings_slice));
let mut dec_settings = Decoder::from(settings_slice);
let mut settings = HSettings::default();
Error::map_error(
settings.decode_frame_contents(&mut dec_settings),
Error::InvalidResumptionToken,
)?;
let tok = dec.decode_remainder();
qtrace!([self], " Transport token {}", hex(tok));
self.conn.enable_resumption(now, tok)?;
if self.conn.state().closed() {
let state = self.conn.state().clone();
let res = self
.base_handler
.handle_state_change(&mut self.conn, &state);
debug_assert_eq!(Ok(true), res);
return Err(Error::FatalError);
}
if self.conn.zero_rtt_state() == ZeroRttState::Sending {
self.base_handler
.set_0rtt_settings(&mut self.conn, settings)?;
self.events
.connection_state_change(self.base_handler.state());
self.push_handler
.borrow_mut()
.maybe_send_max_push_id_frame(&mut self.base_handler);
}
Ok(())
}
/// This is call to close a connection.
pub fn close<S>(&mut self, now: Instant, error: AppError, msg: S)
where
S: AsRef<str> + Display,
{
qinfo!([self], "Close the connection error={} msg={}.", error, msg);
if !matches!(
self.base_handler.state,
Http3State::Closing(_) | Http3State::Closed(_)
) {
self.push_handler.borrow_mut().clear();
self.conn.close(now, error, msg);
self.base_handler.close(error);
self.events
.connection_state_change(self.base_handler.state());
}
}
/// Attempt to force a key update.
///
/// # Errors
///
/// If the connection isn't confirmed, or there is an outstanding key update, this
/// returns `Err(Error::TransportError(neqo_transport::Error::KeyUpdateBlocked))`.
pub fn initiate_key_update(&mut self) -> Res<()> {
self.conn.initiate_key_update()?;
Ok(())
}
// API: Request/response
/// The function fetches a resource using `method`, `target` and `headers`. A response body
/// may be added by calling `send_data`. `stream_close_send` must be sent to finish the request
/// even if request data are not sent.
///
/// # Errors
///
/// If a new stream cannot be created an error will be return.
///
/// # Panics
///
/// `SendMessage` implements `http_stream` so it will not panic.
pub fn fetch<'x, 't: 'x, T>(
&mut self,
now: Instant,
method: &'t str,
target: &'t T,
headers: &'t [Header],
priority: Priority,
) -> Res<StreamId>
where
T: AsRequestTarget<'x> + ?Sized + Debug,
{
let output = self.base_handler.fetch(
&mut self.conn,
Box::new(self.events.clone()),
Box::new(self.events.clone()),
Some(Rc::clone(&self.push_handler)),
&RequestDescription {
method,
connect_type: None,
target,
headers,
priority,
},
);
if let Err(e) = &output {
if e.connection_error() {
self.close(now, e.code(), "");
}
}
output
}
/// Send an [`PRIORITY_UPDATE`-frame][1] on next `Http3Client::process_output()` call.
/// Returns if the priority got changed.
///
/// # Errors
///
/// `InvalidStreamId` if the stream does not exist
///
pub fn priority_update(&mut self, stream_id: StreamId, priority: Priority) -> Res<bool> {
self.base_handler.queue_update_priority(stream_id, priority)
}
/// An application may cancel a stream(request).
/// Both sides, the receiviing and sending side, sending and receiving side, will be closed.
///
/// # Errors
///
/// An error will be return if a stream does not exist.
pub fn cancel_fetch(&mut self, stream_id: StreamId, error: AppError) -> Res<()> {
qinfo!([self], "reset_stream {} error={}.", stream_id, error);
self.base_handler
.cancel_fetch(stream_id, error, &mut self.conn)
}
/// This is call when application is done sending a request.
///
/// # Errors
///
/// An error will be return if stream does not exist.
pub fn stream_close_send(&mut self, stream_id: StreamId) -> Res<()> {
qdebug!([self], "Close sending side stream={}.", stream_id);
self.base_handler
.stream_close_send(&mut self.conn, stream_id)
}
/// # Errors
///
/// An error will be return if a stream does not exist.
pub fn stream_reset_send(&mut self, stream_id: StreamId, error: AppError) -> Res<()> {
qinfo!([self], "stream_reset_send {} error={}.", stream_id, error);
self.base_handler
.stream_reset_send(&mut self.conn, stream_id, error)
}
/// # Errors
///
/// An error will be return if a stream does not exist.
pub fn stream_stop_sending(&mut self, stream_id: StreamId, error: AppError) -> Res<()> {
qinfo!([self], "stream_stop_sending {} error={}.", stream_id, error);
self.base_handler
.stream_stop_sending(&mut self.conn, stream_id, error)
}
/// This function is used for regular HTTP requests and `WebTransport` streams.
/// In the case of regular HTTP requests, the request body is supplied using this function, and
/// headers are supplied through the `fetch` function.
///
/// # Errors
///
/// `InvalidStreamId` if the stream does not exist,
/// `AlreadyClosed` if the stream has already been closed.
/// `TransportStreamDoesNotExist` if the transport stream does not exist (this may happen if
/// `process_output` has not been called when needed, and HTTP3 layer has not picked up the
/// info that the stream has been closed.) `InvalidInput` if an empty buffer has been
/// supplied.
pub fn send_data(&mut self, stream_id: StreamId, buf: &[u8]) -> Res<usize> {
qinfo!(
[self],
"send_data from stream {} sending {} bytes.",
stream_id,
buf.len()
);
self.base_handler
.send_streams
.get_mut(&stream_id)
.ok_or(Error::InvalidStreamId)?
.send_data(&mut self.conn, buf)
}
/// Response data are read directly into a buffer supplied as a parameter of this function to
/// avoid copying data.
///
/// # Errors
///
/// It returns an error if a stream does not exist or an error happen while reading a stream,
/// e.g. early close, protocol error, etc.
pub fn read_data(
&mut self,
now: Instant,
stream_id: StreamId,
buf: &mut [u8],
) -> Res<(usize, bool)> {
qdebug!([self], "read_data from stream {}.", stream_id);
let res = self.base_handler.read_data(&mut self.conn, stream_id, buf);
if let Err(e) = &res {
if e.connection_error() {
self.close(now, e.code(), "");
}
}
res
}
// API: Push streams
/// Cancel a push
///
/// # Errors
///
/// `InvalidStreamId` if the stream does not exist.
pub fn cancel_push(&mut self, push_id: u64) -> Res<()> {
self.push_handler
.borrow_mut()
.cancel(push_id, &mut self.conn, &mut self.base_handler)
}
/// Push response data are read directly into a buffer supplied as a parameter of this function
/// to avoid copying data.
///
/// # Errors
///
/// It returns an error if a stream does not exist(`InvalidStreamId`) or an error has happened
/// while reading a stream, e.g. early close, protocol error, etc.
pub fn push_read_data(
&mut self,
now: Instant,
push_id: u64,
buf: &mut [u8],
) -> Res<(usize, bool)> {
let stream_id = self
.push_handler
.borrow_mut()
.get_active_stream_id(push_id)
.ok_or(Error::InvalidStreamId)?;
self.conn.stream_keep_alive(stream_id, true)?;
self.read_data(now, stream_id, buf)
}
// API WebTransport
//
/// # Errors
///
/// If `WebTransport` cannot be created, e.g. the `WebTransport` support is
/// not negotiated or the HTTP/3 connection is closed.
pub fn webtransport_create_session<'x, 't: 'x, T>(
&mut self,
now: Instant,
target: &'t T,
headers: &'t [Header],
) -> Res<StreamId>
where
T: AsRequestTarget<'x> + ?Sized + Debug,
{
let output = self.base_handler.webtransport_create_session(
&mut self.conn,
Box::new(self.events.clone()),
target,
headers,
);
if let Err(e) = &output {
if e.connection_error() {
self.close(now, e.code(), "");
}
}
output
}
/// Close `WebTransport` cleanly
///
/// # Errors
///
/// `InvalidStreamId` if the stream does not exist,
/// `TransportStreamDoesNotExist` if the transport stream does not exist (this may happen if
/// `process_output` has not been called when needed, and HTTP3 layer has not picked up the
/// info that the stream has been closed.) `InvalidInput` if an empty buffer has been
/// supplied.
pub fn webtransport_close_session(
&mut self,
session_id: StreamId,
error: u32,
message: &str,
) -> Res<()> {
self.base_handler
.webtransport_close_session(&mut self.conn, session_id, error, message)
}
/// # Errors
///
/// This may return an error if the particular session does not exist
/// or the connection is not in the active state.
pub fn webtransport_create_stream(
&mut self,
session_id: StreamId,
stream_type: StreamType,
) -> Res<StreamId> {
self.base_handler.webtransport_create_stream_local(
&mut self.conn,
session_id,
stream_type,
Box::new(self.events.clone()),
Box::new(self.events.clone()),
)
}
/// Send `WebTransport` datagram.
///
/// # Errors
///
/// It may return `InvalidStreamId` if a stream does not exist anymore.
/// The function returns `TooMuchData` if the supply buffer is bigger than
/// the allowed remote datagram size.
pub fn webtransport_send_datagram(
&mut self,
session_id: StreamId,
buf: &[u8],
id: impl Into<DatagramTracking>,
) -> Res<()> {
qtrace!("webtransport_send_datagram session:{:?}", session_id);
self.base_handler
.webtransport_send_datagram(session_id, &mut self.conn, buf, id)
}
/// Returns the current max size of a datagram that can fit into a packet.
/// The value will change over time depending on the encoded size of the
/// packet number, ack frames, etc.
///
/// # Errors
///
/// The function returns `NotAvailable` if datagrams are not enabled.
///
/// # Panics
///
/// This cannot panic. The max varint length is 8.
pub fn webtransport_max_datagram_size(&self, session_id: StreamId) -> Res<u64> {
Ok(self.conn.max_datagram_size()?
- u64::try_from(Encoder::varint_len(session_id.as_u64())).unwrap())
}
/// Sets the `SendOrder` for a given stream
///
/// # Errors
///
/// It may return `InvalidStreamId` if a stream does not exist anymore.
///
/// # Panics
///
/// This cannot panic.
pub fn webtransport_set_sendorder(
&mut self,
stream_id: StreamId,
sendorder: Option<SendOrder>,
) -> Res<()> {
Http3Connection::stream_set_sendorder(&mut self.conn, stream_id, sendorder)
}
/// Sets the `Fairness` for a given stream
///
/// # Errors
///
/// It may return `InvalidStreamId` if a stream does not exist anymore.
///
/// # Panics
///
/// This cannot panic.
pub fn webtransport_set_fairness(&mut self, stream_id: StreamId, fairness: bool) -> Res<()> {
Http3Connection::stream_set_fairness(&mut self.conn, stream_id, fairness)
}
/// Returns the current `SendStreamStats` of a `WebTransportSendStream`.
///
/// # Errors
///
/// `InvalidStreamId` if the stream does not exist.
pub fn webtransport_send_stream_stats(&mut self, stream_id: StreamId) -> Res<SendStreamStats> {
self.base_handler
.send_streams
.get_mut(&stream_id)
.ok_or(Error::InvalidStreamId)?
.stats(&mut self.conn)
}
/// Returns the current `RecvStreamStats` of a `WebTransportRecvStream`.
///
/// # Errors
///
/// `InvalidStreamId` if the stream does not exist.
pub fn webtransport_recv_stream_stats(&mut self, stream_id: StreamId) -> Res<RecvStreamStats> {
self.base_handler
.recv_streams
.get_mut(&stream_id)
.ok_or(Error::InvalidStreamId)?
.stats(&mut self.conn)
}
/// This function combines `process_input` and `process_output` function.
pub fn process(&mut self, dgram: Option<Datagram<impl AsRef<[u8]>>>, now: Instant) -> Output {
qtrace!([self], "Process.");
if let Some(d) = dgram {
self.process_input(d, now);
}
self.process_output(now)
}
/// The function should be called when there is a new UDP packet available. The function will
/// handle the packet payload.
///
/// First, the payload will be handled by the QUIC layer. Afterward, `process_http3` will be
/// called to handle new [`ConnectionEvent`][1]s.
///
/// After this function is called `process_output` should be called to check whether new
/// packets need to be sent or if a timer needs to be updated.
///
/// [1]: ../neqo_transport/enum.ConnectionEvent.html
pub fn process_input(&mut self, dgram: Datagram<impl AsRef<[u8]>>, now: Instant) {
self.process_multiple_input(iter::once(dgram), now);
}
pub fn process_multiple_input(
&mut self,
dgrams: impl IntoIterator<Item = Datagram<impl AsRef<[u8]>>>,
now: Instant,
) {
let mut dgrams = dgrams.into_iter().peekable();
qtrace!([self], "Process multiple datagrams");
if dgrams.peek().is_none() {
return;
}
self.conn.process_multiple_input(dgrams, now);
self.process_http3(now);
}
/// Process HTTP3 layer.
/// When `process_output`, `process_input`, or `process` is called we must call this function
/// as well. The functions calls `Http3Client::check_connection_events` to handle events from
/// the QUC layer and calls `Http3Connection::process_sending` to ensure that HTTP/3 layer
/// data, e.g. control frames, are sent.
fn process_http3(&mut self, now: Instant) {
qtrace!([self], "Process http3 internal.");
match self.base_handler.state() {
Http3State::ZeroRtt | Http3State::Connected | Http3State::GoingAway(..) => {
let res = self.check_connection_events();
if self.check_result(now, &res) {
return;
}
self.push_handler
.borrow_mut()
.maybe_send_max_push_id_frame(&mut self.base_handler);
let res = self.base_handler.process_sending(&mut self.conn);
self.check_result(now, &res);
}
Http3State::Closed { .. } => {}
_ => {
let res = self.check_connection_events();
_ = self.check_result(now, &res);
}
}
}
/// The function should be called to check if there is a new UDP packet to be sent. It should
/// be called after a new packet is received and processed and after a timer expires (QUIC
/// needs timers to handle events like PTO detection and timers are not implemented by the neqo
/// library, but instead must be driven by the application).
///
/// `process_output` can return:
/// - a [`Output::Datagram(Datagram)`][1]: data that should be sent as a UDP payload,
/// - a [`Output::Callback(Duration)`][1]: the duration of a timer. `process_output` should be
/// called at least after the time expires,
/// - [`Output::None`][1]: this is returned when `Nttp3Client` is done and can be destroyed.
///
/// The application should call this function repeatedly until a timer value or None is
/// returned. After that, the application should call the function again if a new UDP packet is
/// received and processed or the timer value expires.
///
/// The HTTP/3 neqo implementation drives the HTTP/3 and QUIC layers, therefore this function
/// will call both layers:
/// - First it calls HTTP/3 layer processing (`process_http3`) to make sure the layer writes
/// data to QUIC layer or cancels streams if needed.
/// - Then QUIC layer processing is called - [`Connection::process_output`][3]. This produces a
/// packet or a timer value. It may also produce new [`ConnectionEvent`][2]s, e.g. connection
/// state-change event.
/// - Therefore the HTTP/3 layer processing (`process_http3`) is called again.
///
/// [1]: ../neqo_transport/enum.Output.html
/// [2]: ../neqo_transport/struct.ConnectionEvents.html
/// [3]: ../neqo_transport/struct.Connection.html#method.process_output
pub fn process_output(&mut self, now: Instant) -> Output {
qtrace!([self], "Process output.");
// Maybe send() stuff on http3-managed streams
self.process_http3(now);
let out = self.conn.process_output(now);
// Update H3 for any transport state changes and events
self.process_http3(now);
out
}
/// This function takes the provided result and check for an error.
/// An error results in closing the connection.
fn check_result<ERR>(&mut self, now: Instant, res: &Res<ERR>) -> bool {
match &res {
Err(Error::HttpGoaway) => {
qinfo!([self], "Connection error: goaway stream_id increased.");
self.close(
now,
Error::HttpGeneralProtocol.code(),
"Connection error: goaway stream_id increased",
);
true
}
Err(e) => {
qinfo!([self], "Connection error: {}.", e);
self.close(now, e.code(), format!("{e}"));
true
}
_ => false,
}
}
/// This function checks [`ConnectionEvent`][2]s emitted by the QUIC layer, e.g. connection
/// change state events, new incoming stream data is available, a stream is was reset, etc.
/// The HTTP/3 layer needs to handle these events. Most of the events are handled by
/// [`Http3Connection`][1] by calling appropriate functions, e.g. `handle_state_change`,
/// `handle_stream_reset`, etc. [`Http3Connection`][1] handle functionalities that are common
/// for the client and server side. Some of the functionalities are specific to the client and
/// they are handled by `Http3Client`. For example, [`ConnectionEvent::RecvStreamReadable`][3]
/// event is handled by `Http3Client::handle_stream_readable`. The function calls
/// `Http3Connection::handle_stream_readable` and then hands the return value as appropriate
/// for the client-side.
///
/// [2]: ../neqo_transport/enum.ConnectionEvent.html
/// [3]: ../neqo_transport/enum.ConnectionEvent.html#variant.RecvStreamReadable
fn check_connection_events(&mut self) -> Res<()> {
qtrace!([self], "Check connection events.");
while let Some(e) = self.conn.next_event() {
qdebug!([self], "check_connection_events - event {:?}.", e);
match e {
ConnectionEvent::NewStream { stream_id } => {
// During this event we only add a new stream to the Http3Connection stream
// list, with NewStreamHeadReader stream handler.
// This function will not read from the stream and try to decode the stream.
// RecvStreamReadable will be emitted after this event and reading, i.e.
// decoding of a stream will happen during that event.
self.base_handler.add_new_stream(stream_id);
}
ConnectionEvent::SendStreamWritable { stream_id } => {
if let Some(s) = self.base_handler.send_streams.get_mut(&stream_id) {
s.stream_writable();
}
}
ConnectionEvent::RecvStreamReadable { stream_id } => {
self.handle_stream_readable(stream_id)?;
}
ConnectionEvent::RecvStreamReset {
stream_id,
app_error,
} => self
.base_handler
.handle_stream_reset(stream_id, app_error, &mut self.conn)?,
ConnectionEvent::SendStreamStopSending {
stream_id,
app_error,
} => self.base_handler.handle_stream_stop_sending(
stream_id,
app_error,
&mut self.conn,
)?,
ConnectionEvent::SendStreamCreatable { stream_type } => {
self.events.new_requests_creatable(stream_type);
}
ConnectionEvent::AuthenticationNeeded => self.events.authentication_needed(),
ConnectionEvent::EchFallbackAuthenticationNeeded { public_name } => {
self.events.ech_fallback_authentication_needed(public_name);
}
ConnectionEvent::StateChange(state) => {
if self
.base_handler
.handle_state_change(&mut self.conn, &state)?
{
self.events
.connection_state_change(self.base_handler.state());
}
}
ConnectionEvent::ZeroRttRejected => {
self.base_handler.handle_zero_rtt_rejected()?;
self.events.zero_rtt_rejected();
self.push_handler.borrow_mut().handle_zero_rtt_rejected();
}
ConnectionEvent::ResumptionToken(token) => {
if let Some(t) = self.encode_resumption_token(&token) {
self.events.resumption_token(t);
}
}
ConnectionEvent::Datagram(dgram) => {
self.base_handler.handle_datagram(&dgram);
}
ConnectionEvent::SendStreamComplete { .. }
| ConnectionEvent::OutgoingDatagramOutcome { .. }
| ConnectionEvent::IncomingDatagramDropped => {}
}
}
Ok(())
}
/// This function handled new data available on a stream. It calls
/// `Http3Client::handle_stream_readable` and handles its response. Reading streams are mostly
/// handled by [`Http3Connection`][1] because most part of it is common for the client and
/// server. The following actions need to be handled by the client-specific code:
/// - `ReceiveOutput::NewStream(NewStreamType::Push(_))` - the server cannot receive a push
/// stream,
/// - `ReceiveOutput::NewStream(NewStreamType::Http)` - client cannot receive a
/// server-initiated HTTP request,
/// - `ReceiveOutput::NewStream(NewStreamType::WebTransportStream(_))` - because
/// `Http3ClientEvents`is needed and events handler is specific to the client.
/// - `ReceiveOutput::ControlFrames(control_frames)` - some control frame handling differs
/// between the client and the server:
/// - `HFrame::CancelPush` - only the client-side may receive it,
/// - `HFrame::MaxPushId { .. }`, `HFrame::PriorityUpdateRequest { .. } ` and
/// `HFrame::PriorityUpdatePush` can only be receive on the server side,
/// - `HFrame::Goaway { stream_id }` needs specific handling by the client by the protocol
/// specification.
///
fn handle_stream_readable(&mut self, stream_id: StreamId) -> Res<()> {
match self
.base_handler
.handle_stream_readable(&mut self.conn, stream_id)?
{
ReceiveOutput::NewStream(NewStreamType::Push(push_id)) => {
self.handle_new_push_stream(stream_id, push_id)
}
ReceiveOutput::NewStream(NewStreamType::Http(_)) => Err(Error::HttpStreamCreation),
ReceiveOutput::NewStream(NewStreamType::WebTransportStream(session_id)) => {
self.base_handler.webtransport_create_stream_remote(
StreamId::from(session_id),
stream_id,
Box::new(self.events.clone()),
Box::new(self.events.clone()),
)?;
let res = self
.base_handler
.handle_stream_readable(&mut self.conn, stream_id)?;
debug_assert!(matches!(res, ReceiveOutput::NoOutput));
Ok(())
}
ReceiveOutput::ControlFrames(control_frames) => {
for f in control_frames {
match f {
HFrame::CancelPush { push_id } => self
.push_handler
.borrow_mut()
.handle_cancel_push(push_id, &mut self.conn, &mut self.base_handler),
HFrame::MaxPushId { .. }
| HFrame::PriorityUpdateRequest { .. }
| HFrame::PriorityUpdatePush { .. } => Err(Error::HttpFrameUnexpected),
HFrame::Goaway { stream_id } => self.handle_goaway(stream_id),
_ => {
unreachable!(
"we should only put MaxPushId, Goaway and PriorityUpdates into control_frames."
);
}
}?;
}
Ok(())
}
_ => Ok(()),
}
}
fn handle_new_push_stream(&mut self, stream_id: StreamId, push_id: u64) -> Res<()> {
if !self.push_handler.borrow().can_receive_push() {
return Err(Error::HttpId);
}
// Add a new push stream to `PushController`. `add_new_push_stream` may return an error
// (this will be a connection error) or a bool.
// If false is returned that means that the stream should be reset because the push has
// been already canceled (CANCEL_PUSH frame or canceling push from the application).
if !self
.push_handler
.borrow_mut()
.add_new_push_stream(push_id, stream_id)?
{
// We are not interested in the result of stream_stop_sending, we are not interested
// in this stream.
mem::drop(
self.conn
.stream_stop_sending(stream_id, Error::HttpRequestCancelled.code()),
);
return Ok(());
}
self.base_handler.add_recv_stream(
stream_id,
Box::new(RecvMessage::new(
&RecvMessageInfo {
message_type: MessageType::Response,
stream_type: Http3StreamType::Push,
stream_id,
first_frame_type: None,
},
Rc::clone(&self.base_handler.qpack_decoder),
Box::new(RecvPushEvents::new(push_id, Rc::clone(&self.push_handler))),
None,
// TODO: think about the right prority for the push streams.
PriorityHandler::new(true, Priority::default()),
)),
);
let res = self
.base_handler
.handle_stream_readable(&mut self.conn, stream_id)?;
debug_assert!(matches!(res, ReceiveOutput::NoOutput));
Ok(())
}
fn handle_goaway(&mut self, goaway_stream_id: StreamId) -> Res<()> {
qinfo!([self], "handle_goaway {}", goaway_stream_id);
if goaway_stream_id.is_uni() || goaway_stream_id.is_server_initiated() {
return Err(Error::HttpId);
}
match self.base_handler.state {
Http3State::Connected => {
self.base_handler.state = Http3State::GoingAway(goaway_stream_id);
}
Http3State::GoingAway(ref mut stream_id) => {
if goaway_stream_id > *stream_id {
return Err(Error::HttpGoaway);
}
*stream_id = goaway_stream_id;
}
Http3State::Closing(..) | Http3State::Closed(..) => {}
_ => unreachable!("Should not receive Goaway frame in this state."),
}
// Issue reset events for streams >= goaway stream id
let send_ids: Vec<StreamId> = self
.base_handler
.send_streams
.iter()
.filter_map(id_gte(goaway_stream_id))
.collect();
for id in send_ids {
// We do not care about streams that are going to be closed.
mem::drop(self.base_handler.handle_stream_stop_sending(
id,
Error::HttpRequestRejected.code(),
&mut self.conn,
));
}
let recv_ids: Vec<StreamId> = self
.base_handler
.recv_streams
.iter()
.filter_map(id_gte(goaway_stream_id))
.collect();
for id in recv_ids {
// We do not care about streams that are going to be closed.
mem::drop(self.base_handler.handle_stream_reset(
id,
Error::HttpRequestRejected.code(),
&mut self.conn,
));
}
self.events.goaway_received();
Ok(())
}
/// Increases `max_stream_data` for a `stream_id`.
///
/// # Errors
///
/// Returns `InvalidStreamId` if a stream does not exist or the receiving
/// side is closed.
pub fn set_stream_max_data(&mut self, stream_id: StreamId, max_data: u64) -> Res<()> {
self.conn.set_stream_max_data(stream_id, max_data)?;
Ok(())
}
#[must_use]
pub fn qpack_decoder_stats(&self) -> QpackStats {
self.base_handler.qpack_decoder.borrow().stats()
}
#[must_use]
pub fn qpack_encoder_stats(&self) -> QpackStats {
self.base_handler.qpack_encoder.borrow().stats()
}
#[must_use]
pub fn transport_stats(&self) -> TransportStats {
self.conn.stats()
}
#[must_use]
pub const fn webtransport_enabled(&self) -> bool {
self.base_handler.webtransport_enabled()
}
}
impl EventProvider for Http3Client {
type Event = Http3ClientEvent;
/// Return true if there are outstanding events.
fn has_events(&self) -> bool {
self.events.has_events()
}
/// Get events that indicate state changes on the connection. This method
/// correctly handles cases where handling one event can obsolete
/// previously-queued events, or cause new events to be generated.
fn next_event(&mut self) -> Option<Self::Event> {
self.events.next_event()
}
}
#[cfg(test)]
mod tests {
use std::{mem, time::Duration};
use neqo_common::{event::Provider, qtrace, Datagram, Decoder, Encoder};
use neqo_crypto::{AllowZeroRtt, AntiReplay, ResumptionToken};
use neqo_qpack::{encoder::QPackEncoder, QpackSettings};
use neqo_transport::{
CloseReason, ConnectionEvent, ConnectionParameters, Output, State, StreamId, StreamType,
Version, MIN_INITIAL_PACKET_SIZE, RECV_BUFFER_SIZE, SEND_BUFFER_SIZE,
};
use test_fixture::{
anti_replay, default_server_h3, fixture_init, new_server, now,
CountingConnectionIdGenerator, DEFAULT_ADDR, DEFAULT_ALPN_H3, DEFAULT_KEYS,
DEFAULT_SERVER_NAME,
};
use super::{
AuthenticationStatus, Connection, Error, HSettings, Header, Http3Client, Http3ClientEvent,
Http3Parameters, Http3State, Rc, RefCell,
};
use crate::{
frames::{HFrame, H3_FRAME_TYPE_SETTINGS, H3_RESERVED_FRAME_TYPES},
qpack_encoder_receiver::EncoderRecvStream,
settings::{HSetting, HSettingType, H3_RESERVED_SETTINGS},
Http3Server, Priority, RecvStream,
};
fn assert_closed(client: &Http3Client, expected: &Error) {
match client.state() {
Http3State::Closing(err) | Http3State::Closed(err) => {
assert_eq!(err, CloseReason::Application(expected.code()));
}
_ => panic!("Wrong state {:?}", client.state()),
};
}
/// Create a http3 client with default configuration.
pub fn default_http3_client() -> Http3Client {
default_http3_client_param(100)
}
pub fn default_http3_client_param(max_table_size: u64) -> Http3Client {
fixture_init();
Http3Client::new(
DEFAULT_SERVER_NAME,
Rc::new(RefCell::new(CountingConnectionIdGenerator::default())),
DEFAULT_ADDR,
DEFAULT_ADDR,
Http3Parameters::default()
.connection_parameters(
// Disable compatible upgrade, which complicates tests.
ConnectionParameters::default()
.versions(Version::default(), vec![Version::default()]),
)
.max_table_size_encoder(max_table_size)
.max_table_size_decoder(max_table_size)
.max_blocked_streams(100)
.max_concurrent_push_streams(5),
now(),
)
.expect("create a default client")
}
const CONTROL_STREAM_TYPE: &[u8] = &[0x0];
// Encoder stream data
const ENCODER_STREAM_DATA: &[u8] = &[0x2];
const ENCODER_STREAM_CAP_INSTRUCTION: &[u8] = &[0x3f, 0x45];
// Encoder stream data with a change capacity instruction(0x3f, 0x45 = change capacity to 100)
// This data will be send when 0-RTT is used and we already have a max_table_capacity from
// resumed settings.
const ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION: &[u8] = &[0x2, 0x3f, 0x45];
const ENCODER_STREAM_DATA_WITH_CAP_INST_AND_ENCODING_INST: &[u8] = &[
0x2, 0x3f, 0x45, 0x67, 0xa7, 0xd4, 0xe5, 0x1c, 0x85, 0xb1, 0x1f, 0x86, 0xa7, 0xd7, 0x71,
0xd1, 0x69, 0x7f,
];
// Decoder stream data
const DECODER_STREAM_DATA: &[u8] = &[0x3];
const PUSH_STREAM_TYPE: &[u8] = &[0x1];
const CLIENT_SIDE_CONTROL_STREAM_ID: StreamId = StreamId::new(2);
const CLIENT_SIDE_ENCODER_STREAM_ID: StreamId = StreamId::new(6);
const CLIENT_SIDE_DECODER_STREAM_ID: StreamId = StreamId::new(10);
struct TestServer {
settings: HFrame,
conn: Connection,
control_stream_id: Option<StreamId>,
encoder: Rc<RefCell<QPackEncoder>>,
encoder_receiver: EncoderRecvStream,
encoder_stream_id: Option<StreamId>,
decoder_stream_id: Option<StreamId>,
}
impl TestServer {
pub fn new() -> Self {
Self::new_with_settings(&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
])
}
pub fn new_with_settings(server_settings: &[HSetting]) -> Self {
fixture_init();
let max_table_size = server_settings
.iter()
.find(|s| s.setting_type == HSettingType::MaxTableCapacity)
.map_or(100, |s| s.value);
let max_blocked_streams = u16::try_from(
server_settings
.iter()
.find(|s| s.setting_type == HSettingType::BlockedStreams)
.map_or(100, |s| s.value),
)
.unwrap();
let qpack = Rc::new(RefCell::new(QPackEncoder::new(
&QpackSettings {
max_table_size_encoder: max_table_size,
max_table_size_decoder: max_table_size,
max_blocked_streams,
},
true,
)));
Self {
settings: HFrame::Settings {
settings: HSettings::new(server_settings),
},
conn: default_server_h3(),
control_stream_id: None,
encoder: Rc::clone(&qpack),
encoder_receiver: EncoderRecvStream::new(CLIENT_SIDE_DECODER_STREAM_ID, qpack),
encoder_stream_id: None,
decoder_stream_id: None,
}
}
pub fn new_with_conn(conn: Connection) -> Self {
let qpack = Rc::new(RefCell::new(QPackEncoder::new(
&QpackSettings {
max_table_size_encoder: 128,
max_table_size_decoder: 128,
max_blocked_streams: 0,
},
true,
)));
Self {
settings: HFrame::Settings {
settings: HSettings::new(&[]),
},
conn,
control_stream_id: None,
encoder: Rc::clone(&qpack),
encoder_receiver: EncoderRecvStream::new(CLIENT_SIDE_DECODER_STREAM_ID, qpack),
encoder_stream_id: None,
decoder_stream_id: None,
}
}
pub fn create_qpack_streams(&mut self) {
// Create a QPACK encoder stream
self.encoder_stream_id = Some(self.conn.stream_create(StreamType::UniDi).unwrap());
self.encoder
.borrow_mut()
.add_send_stream(self.encoder_stream_id.unwrap());
self.encoder
.borrow_mut()
.send_encoder_updates(&mut self.conn)
.unwrap();
// Create decoder stream
self.decoder_stream_id = Some(self.conn.stream_create(StreamType::UniDi).unwrap());
assert_eq!(
self.conn
.stream_send(self.decoder_stream_id.unwrap(), DECODER_STREAM_DATA)
.unwrap(),
1
);
}
pub fn create_control_stream(&mut self) {
// Create control stream
let control = self.conn.stream_create(StreamType::UniDi).unwrap();
qtrace!(["TestServer"], "control stream: {}", control);
self.control_stream_id = Some(control);
// Send stream type on the control stream.
assert_eq!(
self.conn
.stream_send(self.control_stream_id.unwrap(), CONTROL_STREAM_TYPE)
.unwrap(),
1
);
// Encode a settings frame and send it.
let mut enc = Encoder::default();
self.settings.encode(&mut enc);
assert_eq!(
self.conn
.stream_send(self.control_stream_id.unwrap(), enc.as_ref())
.unwrap(),
enc.len()
);
}
pub fn check_client_control_qpack_streams_no_resumption(&mut self) {
self.check_client_control_qpack_streams(
ENCODER_STREAM_DATA,
EXPECTED_REQUEST_HEADER_FRAME,
false,
true,
);
}
pub fn check_control_qpack_request_streams_resumption(
&mut self,
expect_encoder_stream_data: &[u8],
expect_request_header: &[u8],
expect_request: bool,
) {
self.check_client_control_qpack_streams(
expect_encoder_stream_data,
expect_request_header,
expect_request,
false,
);
}
// Check that server has received correct settings and qpack streams.
pub fn check_client_control_qpack_streams(
&mut self,
expect_encoder_stream_data: &[u8],
expect_request_header: &[u8],
expect_request: bool,
expect_connected: bool,
) {
let mut connected = false;
let mut control_stream = false;
let mut qpack_decoder_stream = false;
let mut qpack_encoder_stream = false;
let mut request = false;
while let Some(e) = self.conn.next_event() {
match e {
ConnectionEvent::NewStream { stream_id }
| ConnectionEvent::SendStreamWritable { stream_id } => {
if expect_request {
assert!(matches!(stream_id.as_u64(), 2 | 6 | 10 | 0));
} else {
assert!(matches!(stream_id.as_u64(), 2 | 6 | 10));
}
}
ConnectionEvent::RecvStreamReadable { stream_id } => {
if stream_id == CLIENT_SIDE_CONTROL_STREAM_ID {
self.check_control_stream();
control_stream = true;
} else if stream_id == CLIENT_SIDE_ENCODER_STREAM_ID {
// the qpack encoder stream
self.read_and_check_stream_data(
stream_id,
expect_encoder_stream_data,
false,
);
qpack_encoder_stream = true;
} else if stream_id == CLIENT_SIDE_DECODER_STREAM_ID {
// the qpack decoder stream
self.read_and_check_stream_data(stream_id, DECODER_STREAM_DATA, false);
qpack_decoder_stream = true;
} else if stream_id == 0 {
assert!(expect_request);
self.read_and_check_stream_data(stream_id, expect_request_header, true);
request = true;
} else {
panic!("unexpected event");
}
}
ConnectionEvent::StateChange(State::Connected) => connected = true,
ConnectionEvent::StateChange(_)
| ConnectionEvent::SendStreamCreatable { .. } => {}
_ => panic!("unexpected event"),
}
}
assert_eq!(connected, expect_connected);
assert!(control_stream);
assert!(qpack_encoder_stream);
assert!(qpack_decoder_stream);
assert_eq!(request, expect_request);
}
// Check that the control stream contains default values.
// Expect a SETTINGS frame, some grease, and a MAX_PUSH_ID frame.
// The default test configuration uses:
// - max_table_capacity = 100
// - max_blocked_streams = 100
// and a maximum of 5 push streams.
fn check_control_stream(&mut self) {
let mut buf = [0_u8; 100];
let (amount, fin) = self
.conn
.stream_recv(CLIENT_SIDE_CONTROL_STREAM_ID, &mut buf)
.unwrap();
let mut dec = Decoder::from(&buf[..amount]);
assert_eq!(dec.decode_varint().unwrap(), 0); // control stream type
assert_eq!(dec.decode_varint().unwrap(), 4); // SETTINGS
assert_eq!(
dec.decode_vvec().unwrap(),
&[1, 0x40, 0x64, 7, 0x40, 0x64, 0xab, 0x60, 0x37, 0x42, 0x00]
);
assert_eq!((dec.decode_varint().unwrap() - 0x21) % 0x1f, 0); // Grease
assert!(dec.decode_vvec().unwrap().len() < 8);
assert_eq!(dec.decode_varint().unwrap(), 0xd); // MAX_PUSH_ID
assert_eq!(dec.decode_vvec().unwrap(), &[5]);
assert_eq!(dec.remaining(), 0);
assert!(!fin);
}
pub fn read_and_check_stream_data(
&mut self,
stream_id: StreamId,
expected_data: &[u8],
expected_fin: bool,
) {
let mut buf = [0_u8; 100];
let (amount, fin) = self.conn.stream_recv(stream_id, &mut buf).unwrap();
assert_eq!(fin, expected_fin);
assert_eq!(amount, expected_data.len());
assert_eq!(&buf[..amount], expected_data);
}
pub fn encode_headers(
&mut self,
stream_id: StreamId,
headers: &[Header],
encoder: &mut Encoder,
) {
let header_block =
self.encoder
.borrow_mut()
.encode_header_block(&mut self.conn, headers, stream_id);
let hframe = HFrame::Headers {
header_block: header_block.as_ref().to_vec(),
};
hframe.encode(encoder);
}
}
fn handshake_only(client: &mut Http3Client, server: &mut TestServer) -> Output {
assert_eq!(client.state(), Http3State::Initializing);
let out = client.process_output(now());
assert_eq!(client.state(), Http3State::Initializing);
assert_eq!(*server.conn.state(), State::Init);
let out = server.conn.process(out.dgram(), now());
assert_eq!(*server.conn.state(), State::Handshaking);
let out = client.process(out.dgram(), now());
let out = server.conn.process(out.dgram(), now());
assert!(out.as_dgram_ref().is_none());
let authentication_needed = |e| matches!(e, Http3ClientEvent::AuthenticationNeeded);
assert!(client.events().any(authentication_needed));
client.authenticated(AuthenticationStatus::Ok, now());
out
}
// Perform only Quic transport handshake.
fn connect_only_transport_with(client: &mut Http3Client, server: &mut TestServer) {
let out = handshake_only(client, server);
let out = client.process(out.dgram(), now());
let connected = |e| matches!(e, Http3ClientEvent::StateChange(Http3State::Connected));
assert!(client.events().any(connected));
assert_eq!(client.state(), Http3State::Connected);
server.conn.process_input(out.dgram().unwrap(), now());
assert!(server.conn.state().connected());
}
// Perform only Quic transport handshake.
fn connect_only_transport() -> (Http3Client, TestServer) {
let mut client = default_http3_client();
let mut server = TestServer::new();
connect_only_transport_with(&mut client, &mut server);
(client, server)
}
fn send_and_receive_client_settings(client: &mut Http3Client, server: &mut TestServer) {
// send and receive client settings
let out = client.process_output(now());
server.conn.process_input(out.dgram().unwrap(), now());
server.check_client_control_qpack_streams_no_resumption();
}
// Perform Quic transport handshake and exchange Http3 settings.
fn connect_with(client: &mut Http3Client, server: &mut TestServer) {
connect_only_transport_with(client, server);
send_and_receive_client_settings(client, server);
server.create_control_stream();
server.create_qpack_streams();
// Send the server's control and qpack streams data.
let out = server.conn.process(None::<Datagram>, now());
client.process_input(out.dgram().unwrap(), now());
// assert no error occured.
assert_eq!(client.state(), Http3State::Connected);
}
// Perform Quic transport handshake and exchange Http3 settings.
fn connect_with_connection_parameters(
server_conn_params: ConnectionParameters,
) -> (Http3Client, TestServer) {
// connecting with default max_table_size
let mut client = default_http3_client_param(100);
let server = Connection::new_server(
test_fixture::DEFAULT_KEYS,
test_fixture::DEFAULT_ALPN_H3,
Rc::new(RefCell::new(CountingConnectionIdGenerator::default())),
server_conn_params,
)
.unwrap();
let mut server = TestServer::new_with_conn(server);
connect_with(&mut client, &mut server);
(client, server)
}
// Perform Quic transport handshake and exchange Http3 settings.
fn connect() -> (Http3Client, TestServer) {
let mut client = default_http3_client();
let mut server = TestServer::new();
connect_with(&mut client, &mut server);
(client, server)
}
// Fetch request fetch("GET", "https", "something.com", "/", headers).
fn make_request(
client: &mut Http3Client,
close_sending_side: bool,
headers: &[Header],
) -> StreamId {
let request_stream_id = client
.fetch(
now(),
"GET",
headers,
Priority::default(),
)
.unwrap();
if close_sending_side {
client.stream_close_send(request_stream_id).unwrap();
}
request_stream_id
}
// For fetch request fetch("GET", "https", "something.com", "/", &[])
// the following request header frame will be sent:
const EXPECTED_REQUEST_HEADER_FRAME: &[u8] = &[
0x01, 0x10, 0x00, 0x00, 0xd1, 0xd7, 0x50, 0x89, 0x41, 0xe9, 0x2a, 0x67, 0x35, 0x53, 0x2e,
0x43, 0xd3, 0xc1,
];
// For fetch request fetch("GET", "https", "something.com", "/", &[(String::from("myheaders",
// "myvalue"))]) the following request header frame will be sent:
const EXPECTED_REQUEST_HEADER_FRAME_VERSION2: &[u8] = &[
0x01, 0x11, 0x02, 0x80, 0xd1, 0xd7, 0x50, 0x89, 0x41, 0xe9, 0x2a, 0x67, 0x35, 0x53, 0x2e,
0x43, 0xd3, 0xc1, 0x10,
];
const HTTP_HEADER_FRAME_0: &[u8] = &[0x01, 0x06, 0x00, 0x00, 0xd9, 0x54, 0x01, 0x30];
// The response header from HTTP_HEADER_FRAME (0x01, 0x06, 0x00, 0x00, 0xd9, 0x54, 0x01, 0x30)
// are decoded into:
fn check_response_header_0(header: &[Header]) {
let expected_response_header_0 = &[
Header::new(":status", "200"),
Header::new("content-length", "0"),
];
assert_eq!(header, expected_response_header_0);
}
const HTTP_RESPONSE_1: &[u8] = &[
// headers
0x01, 0x06, 0x00, 0x00, 0xd9, 0x54, 0x01, 0x37, // the first data frame
0x0, 0x3, 0x61, 0x62, 0x63, // the second data frame
0x0, 0x4, 0x64, 0x65, 0x66, 0x67,
];
const HTTP_RESPONSE_HEADER_ONLY_1: &[u8] = &[
// headers
0x01, 0x06, 0x00, 0x00, 0xd9, 0x54, 0x01, 0x37,
];
const HTTP_RESPONSE_DATA_FRAME_1_ONLY_1: &[u8] = &[0x0, 0x3, 0x61, 0x62, 0x63];
const HTTP_RESPONSE_DATA_FRAME_2_ONLY_1: &[u8] = &[0x0, 0x4, 0x64, 0x65, 0x66, 0x67];
// The response header from HTTP_RESPONSE_1 (0x01, 0x06, 0x00, 0x00, 0xd9, 0x54, 0x01, 0x36) are
// decoded into:
fn check_response_header_1(header: &[Header]) {
let expected_response_header_1 = &[
Header::new(":status", "200"),
Header::new("content-length", "7"),
];
assert_eq!(header, expected_response_header_1);
}
const EXPECTED_RESPONSE_DATA_1: &[u8] = &[0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67];
const HTTP_RESPONSE_2: &[u8] = &[
// headers
0x01, 0x06, 0x00, 0x00, 0xd9, 0x54, 0x01, 0x33, // the data frame
0x0, 0x3, 0x61, 0x62, 0x63,
];
const HTTP_RESPONSE_HEADER_ONLY_2: &[u8] = &[
// headers
0x01, 0x06, 0x00, 0x00, 0xd9, 0x54, 0x01, 0x33,
];
const HTTP_RESPONSE_DATA_FRAME_ONLY_2: &[u8] = &[
// the data frame
0x0, 0x3, 0x61, 0x62, 0x63,
];
// The response header from HTTP_RESPONSE_2 (0x01, 0x06, 0x00, 0x00, 0xd9, 0x54, 0x01, 0x36) are
// decoded into:
fn check_response_header_2(header: &[Header]) {
let expected_response_header_2 = &[
Header::new(":status", "200"),
Header::new("content-length", "3"),
];
assert_eq!(header, expected_response_header_2);
}
// The data frame payload from HTTP_RESPONSE_2 is:
const EXPECTED_RESPONSE_DATA_2_FRAME_1: &[u8] = &[0x61, 0x62, 0x63];
fn make_request_and_exchange_pkts(
client: &mut Http3Client,
server: &mut TestServer,
close_sending_side: bool,
) -> StreamId {
let request_stream_id = make_request(client, close_sending_side, &[]);
let out = client.process_output(now());
server.conn.process_input(out.dgram().unwrap(), now());
// find the new request/response stream and send frame v on it.
while let Some(e) = server.conn.next_event() {
match e {
ConnectionEvent::NewStream { stream_id } => {
assert_eq!(stream_id, request_stream_id);
assert_eq!(stream_id.stream_type(), StreamType::BiDi);
}
ConnectionEvent::RecvStreamReadable { stream_id } => {
if stream_id == CLIENT_SIDE_ENCODER_STREAM_ID {
server.read_and_check_stream_data(
stream_id,
ENCODER_STREAM_CAP_INSTRUCTION,
false,
);
} else {
assert_eq!(stream_id, request_stream_id);
server.read_and_check_stream_data(
stream_id,
EXPECTED_REQUEST_HEADER_FRAME,
close_sending_side,
);
}
}
_ => {}
}
}
let dgram = server.conn.process_output(now()).dgram();
if let Some(d) = dgram {
client.process_input(d, now());
}
request_stream_id
}
fn connect_and_send_request(close_sending_side: bool) -> (Http3Client, TestServer, StreamId) {
let (mut client, mut server) = connect();
let request_stream_id =
make_request_and_exchange_pkts(&mut client, &mut server, close_sending_side);
assert_eq!(request_stream_id, 0);
(client, server, request_stream_id)
}
fn server_send_response_and_exchange_packet(
client: &mut Http3Client,
server: &mut TestServer,
stream_id: StreamId,
response: impl AsRef<[u8]>,
close_stream: bool,
) {
_ = server
.conn
.stream_send(stream_id, response.as_ref())
.unwrap();
if close_stream {
server.conn.stream_close_send(stream_id).unwrap();
}
let out = server.conn.process(None::<Datagram>, now());
let out = client.process(out.dgram(), now());
mem::drop(server.conn.process(out.dgram(), now()));
}
const PUSH_PROMISE_DATA: &[u8] = &[
0x00, 0x00, 0xd1, 0xd7, 0x50, 0x89, 0x41, 0xe9, 0x2a, 0x67, 0x35, 0x53, 0x2e, 0x43, 0xd3,
0xc1,
];
fn check_pushpromise_header(header: &[Header]) {
let expected_response_header_1 = &[
Header::new(":method", "GET"),
Header::new(":scheme", "https"),
Header::new(":authority", "something.com"),
Header::new(":path", "/"),
];
assert_eq!(header, expected_response_header_1);
}
// Send a push promise with push_id and request_stream_id.
fn send_push_promise(conn: &mut Connection, stream_id: StreamId, push_id: u64) {
let frame = HFrame::PushPromise {
push_id,
header_block: PUSH_PROMISE_DATA.to_vec(),
};
let mut d = Encoder::default();
frame.encode(&mut d);
_ = conn.stream_send(stream_id, d.as_ref()).unwrap();
}
fn send_push_data_and_exchange_packets(
client: &mut Http3Client,
server: &mut TestServer,
push_id: u8,
close_push_stream: bool,
) -> StreamId {
let push_stream_id = send_push_data(&mut server.conn, push_id, close_push_stream);
let out = server.conn.process_output(now());
let out = client.process(out.dgram(), now());
mem::drop(server.conn.process(out.dgram(), now()));
push_stream_id
}
fn send_push_promise_and_exchange_packets(
client: &mut Http3Client,
server: &mut TestServer,
stream_id: StreamId,
push_id: u64,
) {
send_push_promise(&mut server.conn, stream_id, push_id);
let out = server.conn.process_output(now());
let out = client.process(out.dgram(), now());
mem::drop(server.conn.process(out.dgram(), now()));
}
fn send_cancel_push_and_exchange_packets(
client: &mut Http3Client,
server: &mut TestServer,
push_id: u64,
) {
let frame = HFrame::CancelPush { push_id };
let mut d = Encoder::default();
frame.encode(&mut d);
server
.conn
.stream_send(server.control_stream_id.unwrap(), d.as_ref())
.unwrap();
let out = server.conn.process_output(now());
let out = client.process(out.dgram(), now());
mem::drop(server.conn.process(out.dgram(), now()));
}
const PUSH_DATA: &[u8] = &[
// headers
0x01, 0x06, 0x00, 0x00, 0xd9, 0x54, 0x01, 0x34, // the data frame.
0x0, 0x4, 0x61, 0x62, 0x63, 0x64,
];
// The response header from PUSH_DATA (0x01, 0x06, 0x00, 0x00, 0xd9, 0x54, 0x01, 0x34) are
// decoded into:
fn check_push_response_header(header: &[Header]) {
let expected_push_response_header = [
Header::new(":status", "200"),
Header::new("content-length", "4"),
];
assert_eq!(header, &expected_push_response_header[..]);
}
// The data frame payload from PUSH_DATA is:
const EXPECTED_PUSH_RESPONSE_DATA_FRAME: &[u8] = &[0x61, 0x62, 0x63, 0x64];
// Send push data on a push stream:
// 1) push_stream_type PUSH_STREAM_TYPE
// 2) push_id
// 3) PUSH_DATA that contains encoded headers and a data frame.
// This function can only handle small push_id numbers that fit in a varint of length 1 byte.
fn send_data_on_push(
conn: &mut Connection,
push_stream_id: StreamId,
push_id: u8,
data: impl AsRef<[u8]>,
close_push_stream: bool,
) {
// send data
_ = conn.stream_send(push_stream_id, PUSH_STREAM_TYPE).unwrap();
_ = conn.stream_send(push_stream_id, &[push_id]).unwrap();
_ = conn.stream_send(push_stream_id, data.as_ref()).unwrap();
if close_push_stream {
conn.stream_close_send(push_stream_id).unwrap();
}
}
// Send push data on a push stream:
// 1) push_stream_type PUSH_STREAM_TYPE
// 2) push_id
// 3) PUSH_DATA that contains encoded headers and a data frame.
// This function can only handle small push_id numbers that fit in a varint of length 1 byte.
fn send_push_data(conn: &mut Connection, push_id: u8, close_push_stream: bool) -> StreamId {
send_push_with_data(conn, push_id, PUSH_DATA, close_push_stream)
}
// Send push data on a push stream:
// 1) push_stream_type PUSH_STREAM_TYPE
// 2) push_id
// 3) and supplied push data.
// This function can only handle small push_id numbers that fit in a varint of length 1 byte.
fn send_push_with_data(
conn: &mut Connection,
push_id: u8,
data: &[u8],
close_push_stream: bool,
) -> StreamId {
// create a push stream
let push_stream_id = conn.stream_create(StreamType::UniDi).unwrap();
// send data
send_data_on_push(conn, push_stream_id, push_id, data, close_push_stream);
push_stream_id
}
struct PushPromiseInfo {
pub push_id: u64,
pub ref_stream_id: StreamId,
}
// Helper function: read response when a server sends:
// - HTTP_RESPONSE_2 on the request_stream_id stream,
// - a number of push promises described by a list of PushPromiseInfo.
// - and a push streams with push_id in the push_streams list.
// All push stream contain PUSH_DATA that decodes to headers (that can be checked by calling
// check_push_response_header) and EXPECTED_PUSH_RESPONSE_DATA_FRAME
fn read_response_and_push_events(
client: &mut Http3Client,
push_promises: &[PushPromiseInfo],
push_streams: &[u64],
response_stream_id: StreamId,
) {
let mut num_push_promises = 0;
let mut num_push_stream_headers = 0;
let mut num_push_stream_data = 0;
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::PushPromise {
push_id,
request_stream_id,
headers,
} => {
assert!(push_promises
.iter()
.any(|p| p.push_id == push_id && p.ref_stream_id == request_stream_id));
check_pushpromise_header(&headers[..]);
num_push_promises += 1;
}
Http3ClientEvent::PushHeaderReady {
push_id,
headers,
interim,
fin,
} => {
assert!(push_streams.contains(&push_id));
check_push_response_header(&headers);
num_push_stream_headers += 1;
assert!(!fin);
assert!(!interim);
}
Http3ClientEvent::PushDataReadable { push_id } => {
assert!(push_streams.contains(&push_id));
let mut buf = [0_u8; 100];
let (amount, fin) = client.push_read_data(now(), push_id, &mut buf).unwrap();
assert!(fin);
assert_eq!(amount, EXPECTED_PUSH_RESPONSE_DATA_FRAME.len());
assert_eq!(&buf[..amount], EXPECTED_PUSH_RESPONSE_DATA_FRAME);
num_push_stream_data += 1;
}
Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} => {
assert_eq!(stream_id, response_stream_id);
check_response_header_2(&headers);
assert!(!fin);
assert!(!interim);
}
Http3ClientEvent::DataReadable { stream_id } => {
assert_eq!(stream_id, response_stream_id);
let mut buf = [0_u8; 100];
let (amount, _) = client.read_data(now(), stream_id, &mut buf).unwrap();
assert_eq!(amount, EXPECTED_RESPONSE_DATA_2_FRAME_1.len());
assert_eq!(&buf[..amount], EXPECTED_RESPONSE_DATA_2_FRAME_1);
}
_ => {}
}
}
assert_eq!(num_push_promises, push_promises.len());
assert_eq!(num_push_stream_headers, push_streams.len());
assert_eq!(num_push_stream_data, push_streams.len());
}
// Client: Test receiving a new control stream and a SETTINGS frame.
#[test]
fn client_connect_and_exchange_qpack_and_control_streams() {
mem::drop(connect());
}
// Client: Test that the connection will be closed if control stream
// has been closed.
#[test]
fn client_close_control_stream() {
let (mut client, mut server) = connect();
server
.conn
.stream_close_send(server.control_stream_id.unwrap())
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpClosedCriticalStream);
}
// Client: Test that the connection will be closed if the local control stream
// has been reset.
#[test]
fn client_reset_control_stream() {
let (mut client, mut server) = connect();
server
.conn
.stream_reset_send(server.control_stream_id.unwrap(), Error::HttpNoError.code())
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpClosedCriticalStream);
}
// Client: Test that the connection will be closed if the server side encoder stream
// has been reset.
#[test]
fn client_reset_server_side_encoder_stream() {
let (mut client, mut server) = connect();
server
.conn
.stream_reset_send(server.encoder_stream_id.unwrap(), Error::HttpNoError.code())
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpClosedCriticalStream);
}
// Client: Test that the connection will be closed if the server side decoder stream
// has been reset.
#[test]
fn client_reset_server_side_decoder_stream() {
let (mut client, mut server) = connect();
server
.conn
.stream_reset_send(server.decoder_stream_id.unwrap(), Error::HttpNoError.code())
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpClosedCriticalStream);
}
// Client: Test that the connection will be closed if the local control stream
// has received a stop_sending.
#[test]
fn client_stop_sending_control_stream() {
let (mut client, mut server) = connect();
server
.conn
.stream_stop_sending(CLIENT_SIDE_CONTROL_STREAM_ID, Error::HttpNoError.code())
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpClosedCriticalStream);
}
// Client: Test that the connection will be closed if the client side encoder stream
// has received a stop_sending.
#[test]
fn client_stop_sending_encoder_stream() {
let (mut client, mut server) = connect();
server
.conn
.stream_stop_sending(CLIENT_SIDE_ENCODER_STREAM_ID, Error::HttpNoError.code())
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpClosedCriticalStream);
}
// Client: Test that the connection will be closed if the client side decoder stream
// has received a stop_sending.
#[test]
fn client_stop_sending_decoder_stream() {
let (mut client, mut server) = connect();
server
.conn
.stream_stop_sending(CLIENT_SIDE_DECODER_STREAM_ID, Error::HttpNoError.code())
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpClosedCriticalStream);
}
// Client: test missing SETTINGS frame
// (the first frame sent is a garbage frame).
#[test]
fn client_missing_settings() {
let (mut client, mut server) = connect_only_transport();
// Create server control stream.
let control_stream = server.conn.stream_create(StreamType::UniDi).unwrap();
// Send a HEADERS frame instead (which contains garbage).
let sent = server
.conn
.stream_send(control_stream, &[0x0, 0x1, 0x3, 0x0, 0x1, 0x2]);
assert_eq!(sent, Ok(6));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpMissingSettings);
}
// Client: receiving SETTINGS frame twice causes connection close
// with error HTTP_UNEXPECTED_FRAME.
#[test]
fn client_receive_settings_twice() {
let (mut client, mut server) = connect();
// send the second SETTINGS frame.
let sent = server.conn.stream_send(
server.control_stream_id.unwrap(),
&[0x4, 0x6, 0x1, 0x40, 0x64, 0x7, 0x40, 0x64],
);
assert_eq!(sent, Ok(8));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpFrameUnexpected);
}
fn test_wrong_frame_on_control_stream(v: &[u8]) {
let (mut client, mut server) = connect();
// send a frame that is not allowed on the control stream.
_ = server
.conn
.stream_send(server.control_stream_id.unwrap(), v)
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpFrameUnexpected);
}
// send DATA frame on a cortrol stream
#[test]
fn data_frame_on_control_stream() {
test_wrong_frame_on_control_stream(&[0x0, 0x2, 0x1, 0x2]);
}
// send HEADERS frame on a cortrol stream
#[test]
fn headers_frame_on_control_stream() {
test_wrong_frame_on_control_stream(&[0x1, 0x2, 0x1, 0x2]);
}
// send PUSH_PROMISE frame on a cortrol stream
#[test]
fn push_promise_frame_on_control_stream() {
test_wrong_frame_on_control_stream(&[0x5, 0x2, 0x1, 0x2]);
}
// send PRIORITY_UPDATE frame on a control stream to the client
#[test]
fn priority_update_request_on_control_stream() {
test_wrong_frame_on_control_stream(&[0x80, 0x0f, 0x07, 0x00, 0x01, 0x03]);
}
#[test]
fn priority_update_push_on_control_stream() {
test_wrong_frame_on_control_stream(&[0x80, 0x0f, 0x07, 0x01, 0x01, 0x03]);
}
fn test_wrong_frame_on_push_stream(v: &[u8]) {
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
send_push_promise(&mut server.conn, request_stream_id, 0);
// Create a push stream
let push_stream_id = server.conn.stream_create(StreamType::UniDi).unwrap();
// Send the push stream type byte, push_id and frame v.
_ = server
.conn
.stream_send(push_stream_id, &[0x01, 0x0])
.unwrap();
_ = server.conn.stream_send(push_stream_id, v).unwrap();
let out = server.conn.process_output(now());
let out = client.process(out.dgram(), now());
mem::drop(server.conn.process(out.dgram(), now()));
assert_closed(&client, &Error::HttpFrameUnexpected);
}
#[test]
fn cancel_push_frame_on_push_stream() {
test_wrong_frame_on_push_stream(&[0x3, 0x1, 0x5]);
}
#[test]
fn settings_frame_on_push_stream() {
test_wrong_frame_on_push_stream(&[0x4, 0x4, 0x6, 0x4, 0x8, 0x4]);
}
#[test]
fn push_promise_frame_on_push_stream() {
test_wrong_frame_on_push_stream(&[0x5, 0x2, 0x1, 0x2]);
}
#[test]
fn priority_update_request_on_push_stream() {
test_wrong_frame_on_push_stream(&[0x80, 0x0f, 0x07, 0x00, 0x01, 0x03]);
}
#[test]
fn priority_update_push_on_push_stream() {
test_wrong_frame_on_push_stream(&[0x80, 0x0f, 0x07, 0x01, 0x01, 0x03]);
}
#[test]
fn goaway_frame_on_push_stream() {
test_wrong_frame_on_push_stream(&[0x7, 0x1, 0x5]);
}
#[test]
fn max_push_id_frame_on_push_stream() {
test_wrong_frame_on_push_stream(&[0xd, 0x1, 0x5]);
}
// send DATA frame before a header frame
#[test]
fn data_frame_on_push_stream() {
test_wrong_frame_on_push_stream(&[0x0, 0x2, 0x1, 0x2]);
}
// Client: receive unknown stream type
// This function also tests getting stream id that does not fit into a single byte.
#[test]
fn client_received_unknown_stream() {
let (mut client, mut server) = connect();
// create a stream with unknown type.
let new_stream_id = server.conn.stream_create(StreamType::UniDi).unwrap();
_ = server
.conn
.stream_send(new_stream_id, &[0x41, 0x19, 0x4, 0x4, 0x6, 0x0, 0x8, 0x0])
.unwrap();
let out = server.conn.process_output(now());
let out = client.process(out.dgram(), now());
mem::drop(server.conn.process(out.dgram(), now()));
// check for stop-sending with Error::HttpStreamCreation.
let mut stop_sending_event_found = false;
while let Some(e) = server.conn.next_event() {
if let ConnectionEvent::SendStreamStopSending {
stream_id,
app_error,
} = e
{
stop_sending_event_found = true;
assert_eq!(stream_id, new_stream_id);
assert_eq!(app_error, Error::HttpStreamCreation.code());
}
}
assert!(stop_sending_event_found);
assert_eq!(client.state(), Http3State::Connected);
}
// Test wrong frame on req/rec stream
fn test_wrong_frame_on_request_stream(v: &[u8]) {
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
_ = server.conn.stream_send(request_stream_id, v).unwrap();
// Generate packet with the above bad h3 input
let out = server.conn.process_output(now());
// Process bad input and close the connection.
mem::drop(client.process(out.dgram(), now()));
assert_closed(&client, &Error::HttpFrameUnexpected);
}
#[test]
fn cancel_push_frame_on_request_stream() {
test_wrong_frame_on_request_stream(&[0x3, 0x1, 0x5]);
}
#[test]
fn settings_frame_on_request_stream() {
test_wrong_frame_on_request_stream(&[0x4, 0x4, 0x6, 0x4, 0x8, 0x4]);
}
#[test]
fn goaway_frame_on_request_stream() {
test_wrong_frame_on_request_stream(&[0x7, 0x1, 0x5]);
}
#[test]
fn max_push_id_frame_on_request_stream() {
test_wrong_frame_on_request_stream(&[0xd, 0x1, 0x5]);
}
#[test]
fn priority_update_request_on_request_stream() {
test_wrong_frame_on_request_stream(&[0x80, 0x0f, 0x07, 0x00, 0x01, 0x03]);
}
#[test]
fn priority_update_push_on_request_stream() {
test_wrong_frame_on_request_stream(&[0x80, 0x0f, 0x07, 0x01, 0x01, 0x03]);
}
// Test reading of a slowly streamed frame. bytes are received one by one
#[test]
fn frame_reading() {
let (mut client, mut server) = connect_only_transport();
// create a control stream.
let control_stream = server.conn.stream_create(StreamType::UniDi).unwrap();
// send the stream type
let mut sent = server.conn.stream_send(control_stream, &[0x0]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// start sending SETTINGS frame
sent = server.conn.stream_send(control_stream, &[0x4]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x4]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x6]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x0]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x8]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x0]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_eq!(client.state(), Http3State::Connected);
// Now test PushPromise
sent = server.conn.stream_send(control_stream, &[0x5]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x5]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x4]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x61]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x62]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x63]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
sent = server.conn.stream_send(control_stream, &[0x64]);
assert_eq!(sent, Ok(1));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// PUSH_PROMISE on a control stream will cause an error
assert_closed(&client, &Error::HttpFrameUnexpected);
}
#[test]
fn fetch_basic() {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// send response - 200 Content-Length: 7
// with content: 'abcdefg'.
// The content will be send in 2 DATA frames.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_1,
true,
);
let http_events = client.events().collect::<Vec<_>>();
assert_eq!(http_events.len(), 2);
for e in http_events {
match e {
Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} => {
assert_eq!(stream_id, request_stream_id);
check_response_header_1(&headers);
assert!(!fin);
assert!(!interim);
}
Http3ClientEvent::DataReadable { stream_id } => {
assert_eq!(stream_id, request_stream_id);
let mut buf = [0_u8; 100];
let (amount, fin) = client.read_data(now(), stream_id, &mut buf).unwrap();
assert!(fin);
assert_eq!(amount, EXPECTED_RESPONSE_DATA_1.len());
assert_eq!(&buf[..amount], EXPECTED_RESPONSE_DATA_1);
}
_ => {}
}
}
// after this stream will be removed from hcoon. We will check this by trying to read
// from the stream and that should fail.
let mut buf = [0_u8; 100];
let res = client.read_data(now(), request_stream_id, &mut buf);
assert_eq!(res.unwrap_err(), Error::InvalidStreamId);
client.close(now(), 0, "");
}
/// Force both endpoints into an idle state.
/// Do this by opening unidirectional streams at both endpoints and sending
/// a partial unidirectional stream type (which the receiver has to buffer),
/// then delivering packets out of order.
/// This forces the receiver to create an acknowledgment, which will allow
/// the peer to become idle.
fn force_idle(client: &mut Http3Client, server: &mut TestServer) {
// Send a partial unidirectional stream ID.
// Note that this can't close the stream as that causes the receiver
// to send `MAX_STREAMS`, which would prevent it from becoming idle.
fn dgram(c: &mut Connection) -> Datagram {
let stream = c.stream_create(StreamType::UniDi).unwrap();
_ = c.stream_send(stream, &[0xc0]).unwrap();
c.process_output(now()).dgram().unwrap()
}
let d1 = dgram(&mut client.conn);
let d2 = dgram(&mut client.conn);
server.conn.process_input(d2, now());
server.conn.process_input(d1, now());
let d3 = dgram(&mut server.conn);
let d4 = dgram(&mut server.conn);
client.process_input(d4, now());
client.process_input(d3, now());
let ack = client.process_output(now()).dgram();
server.conn.process_input(ack.unwrap(), now());
}
/// The client should keep a connection alive if it has unanswered requests.
#[test]
fn fetch_keep_alive() {
let (mut client, mut server, _request_stream_id) = connect_and_send_request(true);
force_idle(&mut client, &mut server);
let idle_timeout = ConnectionParameters::default().get_idle_timeout();
assert_eq!(client.process_output(now()).callback(), idle_timeout / 2);
}
// Helper function: read response when a server sends HTTP_RESPONSE_2.
fn read_response(
client: &mut Http3Client,
server: &mut Connection,
request_stream_id: StreamId,
) {
let out = server.process_output(now());
client.process(out.dgram(), now());
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} => {
assert_eq!(stream_id, request_stream_id);
check_response_header_2(&headers);
assert!(!fin);
assert!(!interim);
}
Http3ClientEvent::DataReadable { stream_id } => {
assert_eq!(stream_id, request_stream_id);
let mut buf = [0_u8; 100];
let (amount, fin) = client.read_data(now(), stream_id, &mut buf).unwrap();
assert!(fin);
assert_eq!(amount, EXPECTED_RESPONSE_DATA_2_FRAME_1.len());
assert_eq!(&buf[..amount], EXPECTED_RESPONSE_DATA_2_FRAME_1);
}
_ => {}
}
}
// after this stream will be removed from client. We will check this by trying to read
// from the stream and that should fail.
let mut buf = [0_u8; 100];
let res = client.read_data(now(), request_stream_id, &mut buf);
assert!(res.is_err());
assert_eq!(res.unwrap_err(), Error::InvalidStreamId);
client.close(now(), 0, "");
}
// Data sent with a request:
const REQUEST_BODY: &[u8] = &[0x64, 0x65, 0x66];
// Corresponding data frame that server will receive.
const EXPECTED_REQUEST_BODY_FRAME: &[u8] = &[0x0, 0x3, 0x64, 0x65, 0x66];
// Send a request with the request body.
#[test]
fn fetch_with_data() {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
// Get DataWritable for the request stream so that we can write the request body.
let data_writable = |e| matches!(e, Http3ClientEvent::DataWritable { .. });
assert!(client.events().any(data_writable));
let sent = client.send_data(request_stream_id, REQUEST_BODY).unwrap();
assert_eq!(sent, REQUEST_BODY.len());
client.stream_close_send(request_stream_id).unwrap();
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
// find the new request/response stream and send response on it.
while let Some(e) = server.conn.next_event() {
match e {
ConnectionEvent::NewStream { stream_id } => {
assert_eq!(stream_id, request_stream_id);
assert_eq!(stream_id.stream_type(), StreamType::BiDi);
}
ConnectionEvent::RecvStreamReadable { stream_id } => {
assert_eq!(stream_id, request_stream_id);
// Read request body.
let mut buf = [0_u8; 100];
let (amount, fin) = server.conn.stream_recv(stream_id, &mut buf).unwrap();
assert!(fin);
assert_eq!(amount, EXPECTED_REQUEST_BODY_FRAME.len());
assert_eq!(&buf[..amount], EXPECTED_REQUEST_BODY_FRAME);
// send response - 200 Content-Length: 3
// with content: 'abc'.
_ = server.conn.stream_send(stream_id, HTTP_RESPONSE_2).unwrap();
server.conn.stream_close_send(stream_id).unwrap();
}
_ => {}
}
}
read_response(&mut client, &mut server.conn, request_stream_id);
}
// send a request with request body containing request_body. We expect to receive
// expected_data_frame_header.
fn fetch_with_data_length_xbytes(request_body: &[u8], expected_data_frame_header: &[u8]) {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
// Get DataWritable for the request stream so that we can write the request body.
let data_writable = |e| matches!(e, Http3ClientEvent::DataWritable { .. });
assert!(client.events().any(data_writable));
let sent = client.send_data(request_stream_id, request_body);
assert_eq!(sent, Ok(request_body.len()));
// Close stream.
client.stream_close_send(request_stream_id).unwrap();
// We need to loop a bit until all data has been sent.
let mut out = client.process_output(now());
for _i in 0..20 {
out = server.conn.process(out.dgram(), now());
out = client.process(out.dgram(), now());
}
// check request body is received.
// Then send a response.
while let Some(e) = server.conn.next_event() {
if let ConnectionEvent::RecvStreamReadable { stream_id } = e {
if stream_id == request_stream_id {
// Read the DATA frame.
let mut buf = vec![1_u8; RECV_BUFFER_SIZE];
let (amount, fin) = server.conn.stream_recv(stream_id, &mut buf).unwrap();
assert!(fin);
assert_eq!(
amount,
request_body.len() + expected_data_frame_header.len()
);
// Check the DATA frame header
assert_eq!(
&buf[..expected_data_frame_header.len()],
expected_data_frame_header
);
// Check data.
assert_eq!(&buf[expected_data_frame_header.len()..amount], request_body);
// send response - 200 Content-Length: 3
// with content: 'abc'.
_ = server.conn.stream_send(stream_id, HTTP_RESPONSE_2).unwrap();
server.conn.stream_close_send(stream_id).unwrap();
}
}
}
read_response(&mut client, &mut server.conn, request_stream_id);
}
// send a request with 63 bytes. The DATA frame length field will still have 1 byte.
#[test]
fn fetch_with_data_length_63bytes() {
fetch_with_data_length_xbytes(&[0_u8; 63], &[0x0, 0x3f]);
}
// send a request with 64 bytes. The DATA frame length field will need 2 byte.
#[test]
fn fetch_with_data_length_64bytes() {
fetch_with_data_length_xbytes(&[0_u8; 64], &[0x0, 0x40, 0x40]);
}
// send a request with 16383 bytes. The DATA frame length field will still have 2 byte.
#[test]
fn fetch_with_data_length_16383bytes() {
fetch_with_data_length_xbytes(&[0_u8; 16383], &[0x0, 0x7f, 0xff]);
}
// send a request with 16384 bytes. The DATA frame length field will need 4 byte.
#[test]
fn fetch_with_data_length_16384bytes() {
fetch_with_data_length_xbytes(&[0_u8; 16384], &[0x0, 0x80, 0x0, 0x40, 0x0]);
}
// Send 2 data frames so that the second one cannot fit into the send_buf and it is only
// partialy sent. We check that the sent data is correct.
fn fetch_with_two_data_frames(
first_frame: &[u8],
expected_first_data_frame_header: &[u8],
expected_second_data_frame_header: &[u8],
expected_second_data_frame: &[u8],
) {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
// Get DataWritable for the request stream so that we can write the request body.
let data_writable = |e| matches!(e, Http3ClientEvent::DataWritable { .. });
assert!(client.events().any(data_writable));
// Send the first frame.
let sent = client.send_data(request_stream_id, first_frame);
assert_eq!(sent, Ok(first_frame.len()));
// The second frame cannot fit.
let sent = client.send_data(request_stream_id, &vec![0_u8; SEND_BUFFER_SIZE]);
assert_eq!(sent, Ok(expected_second_data_frame.len()));
// Close stream.
client.stream_close_send(request_stream_id).unwrap();
let mut out = client.process_output(now());
// We need to loop a bit until all data has been sent. Once for every 1K
// of data.
for _i in 0..SEND_BUFFER_SIZE / 1000 {
out = server.conn.process(out.dgram(), now());
out = client.process(out.dgram(), now());
}
// Check received frames and send a response.
while let Some(e) = server.conn.next_event() {
if let ConnectionEvent::RecvStreamReadable { stream_id } = e {
if stream_id == request_stream_id {
// Read DATA frames.
let mut buf = vec![1_u8; RECV_BUFFER_SIZE];
let (amount, fin) = server.conn.stream_recv(stream_id, &mut buf).unwrap();
assert!(fin);
assert_eq!(
amount,
expected_first_data_frame_header.len()
+ first_frame.len()
+ expected_second_data_frame_header.len()
+ expected_second_data_frame.len()
);
// Check the first DATA frame header
let end = expected_first_data_frame_header.len();
assert_eq!(&buf[..end], expected_first_data_frame_header);
// Check the first frame data.
let start = end;
let end = end + first_frame.len();
assert_eq!(&buf[start..end], first_frame);
// Check the second DATA frame header
let start2 = end;
let end2 = end + expected_second_data_frame_header.len();
assert_eq!(&buf[start2..end2], expected_second_data_frame_header);
// Check the second frame data.
let start3 = end2;
let end3 = end2 + expected_second_data_frame.len();
assert_eq!(&buf[start3..end3], expected_second_data_frame);
// send response - 200 Content-Length: 3
// with content: 'abc'.
_ = server.conn.stream_send(stream_id, HTTP_RESPONSE_2).unwrap();
server.conn.stream_close_send(stream_id).unwrap();
}
}
}
read_response(&mut client, &mut server.conn, request_stream_id);
}
fn alloc_buffer(size: usize) -> (Vec<u8>, Vec<u8>) {
let data_frame = HFrame::Data { len: size as u64 };
let mut enc = Encoder::default();
data_frame.encode(&mut enc);
(vec![0_u8; size], enc.as_ref().to_vec())
}
// Send 2 frames. For the second one we can only send 63 bytes.
// After the first frame there is exactly 63+2 bytes left in the send buffer.
#[test]
fn fetch_two_data_frame_second_63bytes() {
let (buf, hdr) = alloc_buffer(SEND_BUFFER_SIZE - 88);
fetch_with_two_data_frames(&buf, &hdr, &[0x0, 0x3f], &[0_u8; 63]);
}
// Send 2 frames. For the second one we can only send 63 bytes.
// After the first frame there is exactly 63+3 bytes left in the send buffer,
// but we can only send 63 bytes.
#[test]
fn fetch_two_data_frame_second_63bytes_place_for_66() {
let (buf, hdr) = alloc_buffer(SEND_BUFFER_SIZE - 89);
fetch_with_two_data_frames(&buf, &hdr, &[0x0, 0x3f], &[0_u8; 63]);
}
// Send 2 frames. For the second one we can only send 64 bytes.
// After the first frame there is exactly 64+3 bytes left in the send buffer,
// but we can only send 64 bytes.
#[test]
fn fetch_two_data_frame_second_64bytes_place_for_67() {
let (buf, hdr) = alloc_buffer(SEND_BUFFER_SIZE - 90);
fetch_with_two_data_frames(&buf, &hdr, &[0x0, 0x40, 0x40], &[0_u8; 64]);
}
// Send 2 frames. For the second one we can only send 16383 bytes.
// After the first frame there is exactly 16383+3 bytes left in the send buffer.
#[test]
fn fetch_two_data_frame_second_16383bytes() {
let (buf, hdr) = alloc_buffer(SEND_BUFFER_SIZE - 16409);
fetch_with_two_data_frames(&buf, &hdr, &[0x0, 0x7f, 0xff], &[0_u8; 16383]);
}
// Send 2 frames. For the second one we can only send 16383 bytes.
// After the first frame there is exactly 16383+4 bytes left in the send buffer, but we can only
// send 16383 bytes.
#[test]
fn fetch_two_data_frame_second_16383bytes_place_for_16387() {
let (buf, hdr) = alloc_buffer(SEND_BUFFER_SIZE - 16410);
fetch_with_two_data_frames(&buf, &hdr, &[0x0, 0x7f, 0xff], &[0_u8; 16383]);
}
// Send 2 frames. For the second one we can only send 16383 bytes.
// After the first frame there is exactly 16383+5 bytes left in the send buffer, but we can only
// send 16383 bytes.
#[test]
fn fetch_two_data_frame_second_16383bytes_place_for_16388() {
let (buf, hdr) = alloc_buffer(SEND_BUFFER_SIZE - 16411);
fetch_with_two_data_frames(&buf, &hdr, &[0x0, 0x7f, 0xff], &[0_u8; 16383]);
}
// Send 2 frames. For the second one we can send 16384 bytes.
// After the first frame there is exactly 16384+5 bytes left in the send buffer, but we can send
// 16384 bytes.
#[test]
fn fetch_two_data_frame_second_16384bytes_place_for_16389() {
let (buf, hdr) = alloc_buffer(SEND_BUFFER_SIZE - 16412);
fetch_with_two_data_frames(&buf, &hdr, &[0x0, 0x80, 0x0, 0x40, 0x0], &[0_u8; 16384]);
}
// Test receiving STOP_SENDING with the HttpNoError error code.
#[test]
fn stop_sending_early_response() {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
// Stop sending with early_response.
assert_eq!(
Ok(()),
server
.conn
.stream_stop_sending(request_stream_id, Error::HttpNoError.code())
);
// send response - 200 Content-Length: 3
// with content: 'abc'.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
true,
);
let mut stop_sending = false;
let mut response_headers = false;
let mut response_body = false;
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::StopSending { stream_id, error } => {
assert_eq!(stream_id, request_stream_id);
assert_eq!(error, Error::HttpNoError.code());
// assert that we cannot send any more request data.
assert_eq!(
Err(Error::InvalidStreamId),
client.send_data(request_stream_id, &[0_u8; 10])
);
stop_sending = true;
}
Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} => {
assert_eq!(stream_id, request_stream_id);
check_response_header_2(&headers);
assert!(!fin);
assert!(!interim);
response_headers = true;
}
Http3ClientEvent::DataReadable { stream_id } => {
assert_eq!(stream_id, request_stream_id);
let mut buf = [0_u8; 100];
let (amount, fin) = client.read_data(now(), stream_id, &mut buf).unwrap();
assert!(fin);
assert_eq!(amount, EXPECTED_RESPONSE_DATA_2_FRAME_1.len());
assert_eq!(&buf[..amount], EXPECTED_RESPONSE_DATA_2_FRAME_1);
response_body = true;
}
_ => {}
}
}
assert!(response_headers);
assert!(response_body);
assert!(stop_sending);
// after this stream will be removed from client. We will check this by trying to read
// from the stream and that should fail.
let mut buf = [0_u8; 100];
let res = client.read_data(now(), request_stream_id, &mut buf);
assert!(res.is_err());
assert_eq!(res.unwrap_err(), Error::InvalidStreamId);
client.close(now(), 0, "");
}
// Server sends stop sending and reset.
#[test]
fn stop_sending_other_error_with_reset() {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
// Stop sending with RequestRejected.
assert_eq!(
Ok(()),
server
.conn
.stream_stop_sending(request_stream_id, Error::HttpRequestRejected.code())
);
// also reset with RequestRejected.
assert_eq!(
Ok(()),
server
.conn
.stream_reset_send(request_stream_id, Error::HttpRequestRejected.code())
);
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
let mut reset = false;
let mut stop_sending = false;
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::StopSending { stream_id, error } => {
assert_eq!(stream_id, request_stream_id);
assert_eq!(error, Error::HttpRequestRejected.code());
stop_sending = true;
}
Http3ClientEvent::Reset {
stream_id,
error,
local,
} => {
assert_eq!(stream_id, request_stream_id);
assert_eq!(error, Error::HttpRequestRejected.code());
assert!(!local);
reset = true;
}
Http3ClientEvent::HeaderReady { .. } | Http3ClientEvent::DataReadable { .. } => {
panic!("We should not get any headers or data");
}
_ => {}
}
}
assert!(reset);
assert!(stop_sending);
// after this stream will be removed from client. We will check this by trying to read
// from the stream and that should fail.
let mut buf = [0_u8; 100];
let res = client.read_data(now(), request_stream_id, &mut buf);
assert!(res.is_err());
assert_eq!(res.unwrap_err(), Error::InvalidStreamId);
client.close(now(), 0, "");
}
// Server sends stop sending with RequestRejected, but it does not send reset.
#[test]
fn stop_sending_other_error_wo_reset() {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
// Stop sending with RequestRejected.
assert_eq!(
Ok(()),
server
.conn
.stream_stop_sending(request_stream_id, Error::HttpRequestRejected.code())
);
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
let mut stop_sending = false;
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::StopSending { stream_id, error } => {
assert_eq!(stream_id, request_stream_id);
assert_eq!(error, Error::HttpRequestRejected.code());
stop_sending = true;
}
Http3ClientEvent::Reset { .. } => {
panic!("We should not get StopSending.");
}
Http3ClientEvent::HeaderReady { .. } | Http3ClientEvent::DataReadable { .. } => {
panic!("We should not get any headers or data");
}
_ => {}
}
}
assert!(stop_sending);
// after this we can still read from a stream.
let mut buf = [0_u8; 100];
let res = client.read_data(now(), request_stream_id, &mut buf);
assert!(res.is_ok());
client.close(now(), 0, "");
}
// Server sends stop sending and reset. We have some events for that stream already
// in client.events. The events will be removed.
#[test]
fn stop_sending_and_reset_other_error_with_events() {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
// send response - 200 Content-Length: 3
// with content: 'abc'.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
false,
);
// At this moment we have some new events, i.e. a HeadersReady event
// Send a stop sending and reset.
assert_eq!(
Ok(()),
server
.conn
.stream_stop_sending(request_stream_id, Error::HttpRequestCancelled.code())
);
assert_eq!(
Ok(()),
server
.conn
.stream_reset_send(request_stream_id, Error::HttpRequestCancelled.code())
);
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
let mut reset = false;
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::StopSending { stream_id, error } => {
assert_eq!(stream_id, request_stream_id);
assert_eq!(error, Error::HttpRequestCancelled.code());
}
Http3ClientEvent::Reset {
stream_id,
error,
local,
} => {
assert_eq!(stream_id, request_stream_id);
assert_eq!(error, Error::HttpRequestCancelled.code());
assert!(!local);
reset = true;
}
Http3ClientEvent::HeaderReady { .. } | Http3ClientEvent::DataReadable { .. } => {
panic!("We should not get any headers or data");
}
_ => {}
}
}
assert!(reset);
// after this stream will be removed from client. We will check this by trying to read
// from the stream and that should fail.
let mut buf = [0_u8; 100];
let res = client.read_data(now(), request_stream_id, &mut buf);
assert!(res.is_err());
assert_eq!(res.unwrap_err(), Error::InvalidStreamId);
client.close(now(), 0, "");
}
// Server sends stop sending with code that is not HttpNoError.
// We have some events for that stream already in the client.events.
// The events will be removed.
#[test]
fn stop_sending_other_error_with_events() {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
// send response - 200 Content-Length: 3
// with content: 'abc'.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
false,
);
// At this moment we have some new event, i.e. a HeadersReady event
// Send a stop sending.
assert_eq!(
Ok(()),
server
.conn
.stream_stop_sending(request_stream_id, Error::HttpRequestCancelled.code())
);
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
let mut stop_sending = false;
let mut header_ready = false;
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::StopSending { stream_id, error } => {
assert_eq!(stream_id, request_stream_id);
assert_eq!(error, Error::HttpRequestCancelled.code());
stop_sending = true;
}
Http3ClientEvent::Reset { .. } => {
panic!("We should not get StopSending.");
}
Http3ClientEvent::HeaderReady { .. } | Http3ClientEvent::DataReadable { .. } => {
header_ready = true;
}
_ => {}
}
}
assert!(stop_sending);
assert!(header_ready);
// after this, we can sill read data from a sttream.
let mut buf = [0_u8; 100];
let (amount, fin) = client
.read_data(now(), request_stream_id, &mut buf)
.unwrap();
assert!(!fin);
assert_eq!(amount, EXPECTED_RESPONSE_DATA_2_FRAME_1.len());
assert_eq!(&buf[..amount], EXPECTED_RESPONSE_DATA_2_FRAME_1);
client.close(now(), 0, "");
}
// Server sends a reset. We will close sending side as well.
#[test]
fn reset_wo_stop_sending() {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
// Send a reset.
assert_eq!(
Ok(()),
server
.conn
.stream_reset_send(request_stream_id, Error::HttpRequestCancelled.code())
);
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
let mut reset = false;
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::StopSending { .. } => {
panic!("We should not get StopSending.");
}
Http3ClientEvent::Reset {
stream_id,
error,
local,
} => {
assert_eq!(stream_id, request_stream_id);
assert_eq!(error, Error::HttpRequestCancelled.code());
assert!(!local);
reset = true;
}
Http3ClientEvent::HeaderReady { .. } | Http3ClientEvent::DataReadable { .. } => {
panic!("We should not get any headers or data");
}
_ => {}
}
}
assert!(reset);
// after this stream will be removed from client. We will check this by trying to read
// from the stream and that should fail.
let mut buf = [0_u8; 100];
let res = client.read_data(now(), request_stream_id, &mut buf);
assert!(res.is_err());
assert_eq!(res.unwrap_err(), Error::InvalidStreamId);
client.close(now(), 0, "");
}
fn test_incomplet_frame(buf: &[u8], error: &Error) {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
buf,
true,
);
while let Some(e) = client.next_event() {
if let Http3ClientEvent::DataReadable { stream_id } = e {
assert_eq!(stream_id, request_stream_id);
let mut buf_res = [0_u8; 100];
let res = client.read_data(now(), stream_id, &mut buf_res);
assert!(res.is_err());
assert_eq!(res.unwrap_err(), Error::HttpFrame);
}
}
assert_closed(&client, error);
}
// Incomplete DATA frame
#[test]
fn incomplet_data_frame() {
test_incomplet_frame(&HTTP_RESPONSE_2[..12], &Error::HttpFrame);
}
// Incomplete HEADERS frame
#[test]
fn incomplet_headers_frame() {
test_incomplet_frame(&HTTP_RESPONSE_2[..7], &Error::HttpFrame);
}
#[test]
fn incomplet_unknown_frame() {
test_incomplet_frame(&[0x21], &Error::HttpFrame);
}
// test goaway
#[test]
fn goaway() {
let (mut client, mut server) = connect();
let request_stream_id_1 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_1, 0);
let request_stream_id_2 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_2, 4);
let request_stream_id_3 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_3, 8);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
_ = server
.conn
.stream_send(server.control_stream_id.unwrap(), &[0x7, 0x1, 0x8])
.unwrap();
// find the new request/response stream and send frame v on it.
while let Some(e) = server.conn.next_event() {
if let ConnectionEvent::RecvStreamReadable { stream_id } = e {
let mut buf = [0_u8; 100];
_ = server.conn.stream_recv(stream_id, &mut buf).unwrap();
if (stream_id == request_stream_id_1) || (stream_id == request_stream_id_2) {
// send response - 200 Content-Length: 7
// with content: 'abcdefg'.
// The content will be send in 2 DATA frames.
_ = server.conn.stream_send(stream_id, HTTP_RESPONSE_1).unwrap();
server.conn.stream_close_send(stream_id).unwrap();
}
}
}
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
let mut stream_reset = false;
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::HeaderReady { headers, fin, .. } => {
check_response_header_1(&headers);
assert!(!fin);
}
Http3ClientEvent::DataReadable { stream_id } => {
assert!(
(stream_id == request_stream_id_1) || (stream_id == request_stream_id_2)
);
let mut buf = [0_u8; 100];
assert_eq!(
(EXPECTED_RESPONSE_DATA_1.len(), true),
client.read_data(now(), stream_id, &mut buf).unwrap()
);
}
Http3ClientEvent::Reset {
stream_id,
error,
local,
} => {
assert_eq!(stream_id, request_stream_id_3);
assert_eq!(error, Error::HttpRequestRejected.code());
assert!(!local);
stream_reset = true;
}
_ => {}
}
}
assert!(stream_reset);
assert_eq!(client.state(), Http3State::GoingAway(StreamId::new(8)));
// Check that a new request cannot be made.
assert_eq!(
client.fetch(
now(),
"GET",
&("https", "something.com", "/"),
&[],
Priority::default()
),
Err(Error::AlreadyClosed)
);
client.close(now(), 0, "");
}
#[test]
fn multiple_goaways() {
let (mut client, mut server) = connect();
let request_stream_id_1 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_1, 0);
let request_stream_id_2 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_2, 4);
let request_stream_id_3 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_3, 8);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
// First send a Goaway frame with an higher number
_ = server
.conn
.stream_send(server.control_stream_id.unwrap(), &[0x7, 0x1, 0x8])
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// Check that there is one reset for stream_id 8
let mut stream_reset_1 = 0;
while let Some(e) = client.next_event() {
if let Http3ClientEvent::Reset {
stream_id,
error,
local,
} = e
{
assert_eq!(stream_id, request_stream_id_3);
assert_eq!(error, Error::HttpRequestRejected.code());
assert!(!local);
stream_reset_1 += 1;
}
}
assert_eq!(stream_reset_1, 1);
assert_eq!(client.state(), Http3State::GoingAway(StreamId::new(8)));
// Server sends another GOAWAY frame
_ = server
.conn
.stream_send(server.control_stream_id.unwrap(), &[0x7, 0x1, 0x4])
.unwrap();
// Send response for stream 0
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id_1,
HTTP_RESPONSE_1,
true,
);
let mut stream_reset_2 = 0;
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::HeaderReady { headers, fin, .. } => {
check_response_header_1(&headers);
assert!(!fin);
}
Http3ClientEvent::DataReadable { stream_id } => {
assert!(stream_id == request_stream_id_1);
let mut buf = [0_u8; 100];
assert_eq!(
(EXPECTED_RESPONSE_DATA_1.len(), true),
client.read_data(now(), stream_id, &mut buf).unwrap()
);
}
Http3ClientEvent::Reset {
stream_id,
error,
local,
} => {
assert_eq!(stream_id, request_stream_id_2);
assert_eq!(error, Error::HttpRequestRejected.code());
assert!(!local);
stream_reset_2 += 1;
}
_ => {}
}
}
assert_eq!(stream_reset_2, 1);
assert_eq!(client.state(), Http3State::GoingAway(StreamId::new(4)));
}
#[test]
fn multiple_goaways_stream_id_increased() {
let (mut client, mut server) = connect();
let request_stream_id_1 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_1, 0);
let request_stream_id_2 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_2, 4);
let request_stream_id_3 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_3, 8);
// First send a Goaway frame with a smaller number
_ = server
.conn
.stream_send(server.control_stream_id.unwrap(), &[0x7, 0x1, 0x4])
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_eq!(client.state(), Http3State::GoingAway(StreamId::new(4)));
// Now send a Goaway frame with an higher number
_ = server
.conn
.stream_send(server.control_stream_id.unwrap(), &[0x7, 0x1, 0x8])
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpGeneralProtocol);
}
#[test]
fn goaway_wrong_stream_id() {
let (mut client, mut server) = connect();
_ = server
.conn
.stream_send(server.control_stream_id.unwrap(), &[0x7, 0x1, 0x9])
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpId);
}
// Close stream before headers.
#[test]
fn stream_fin_wo_headers() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// send fin before sending any data.
server.conn.stream_close_send(request_stream_id).unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// Recv HeaderReady wo headers with fin.
let e = client.events().next().unwrap();
assert_eq!(
e,
Http3ClientEvent::Reset {
stream_id: request_stream_id,
error: Error::HttpGeneralProtocolStream.code(),
local: true,
}
);
// Stream should now be closed and gone
let mut buf = [0_u8; 100];
assert_eq!(
client.read_data(now(), StreamId::new(0), &mut buf),
Err(Error::InvalidStreamId)
);
}
// Close stream imemediately after headers.
#[test]
fn stream_fin_after_headers() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_HEADER_ONLY_2,
true,
);
// Recv HeaderReady with headers and fin.
let e = client.events().next().unwrap();
if let Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} = e
{
assert_eq!(stream_id, request_stream_id);
check_response_header_2(&headers);
assert!(fin);
assert!(!interim);
} else {
panic!("wrong event type");
}
// Stream should now be closed and gone
let mut buf = [0_u8; 100];
assert_eq!(
client.read_data(now(), StreamId::new(0), &mut buf),
Err(Error::InvalidStreamId)
);
}
// Send headers, read headers and than close stream.
// We should get HeaderReady and a DataReadable
#[test]
fn stream_fin_after_headers_are_read_wo_data_frame() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send some good data wo fin
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_HEADER_ONLY_2,
false,
);
// Recv headers wo fin
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} => {
assert_eq!(stream_id, request_stream_id);
check_response_header_2(&headers);
assert!(!fin);
assert!(!interim);
}
Http3ClientEvent::DataReadable { .. } => {
panic!("We should not receive a DataGeadable event!");
}
_ => {}
};
}
// ok NOW send fin
server.conn.stream_close_send(request_stream_id).unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// Recv DataReadable wo data with fin
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::HeaderReady { .. } => {
panic!("We should not get another HeaderReady!");
}
Http3ClientEvent::DataReadable { stream_id } => {
assert_eq!(stream_id, request_stream_id);
let mut buf = [0_u8; 100];
let res = client.read_data(now(), stream_id, &mut buf);
let (len, fin) = res.expect("should read");
assert_eq!(0, len);
assert!(fin);
}
_ => {}
};
}
// Stream should now be closed and gone
let mut buf = [0_u8; 100];
assert_eq!(
client.read_data(now(), StreamId::new(0), &mut buf),
Err(Error::InvalidStreamId)
);
}
// Send headers and an empty data frame, then close the stream.
#[test]
fn stream_fin_after_headers_and_a_empty_data_frame() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send headers.
_ = server
.conn
.stream_send(request_stream_id, HTTP_RESPONSE_HEADER_ONLY_2)
.unwrap();
// Send an empty data frame.
_ = server
.conn
.stream_send(request_stream_id, &[0x00, 0x00])
.unwrap();
// ok NOW send fin
server.conn.stream_close_send(request_stream_id).unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// Recv HeaderReady with fin.
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} => {
assert_eq!(stream_id, request_stream_id);
check_response_header_2(&headers);
assert!(!fin);
assert!(!interim);
}
Http3ClientEvent::DataReadable { stream_id } => {
assert_eq!(stream_id, request_stream_id);
let mut buf = [0_u8; 100];
assert_eq!(Ok((0, true)), client.read_data(now(), stream_id, &mut buf));
}
_ => {}
};
}
// Stream should now be closed and gone
let mut buf = [0_u8; 100];
assert_eq!(
client.read_data(now(), request_stream_id, &mut buf),
Err(Error::InvalidStreamId)
);
}
// Send headers and an empty data frame. Read headers and then close the stream.
// We should get a HeaderReady without fin and a DataReadable wo data and with fin.
#[test]
fn stream_fin_after_headers_an_empty_data_frame_are_read() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send some good data wo fin
// Send headers.
_ = server
.conn
.stream_send(request_stream_id, HTTP_RESPONSE_HEADER_ONLY_2)
.unwrap();
// Send an empty data frame.
_ = server
.conn
.stream_send(request_stream_id, &[0x00, 0x00])
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// Recv headers wo fin
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} => {
assert_eq!(stream_id, request_stream_id);
check_response_header_2(&headers);
assert!(!fin);
assert!(!interim);
}
Http3ClientEvent::DataReadable { .. } => {
panic!("We should not receive a DataGeadable event!");
}
_ => {}
};
}
// ok NOW send fin
server.conn.stream_close_send(request_stream_id).unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// Recv no data, but do get fin
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::HeaderReady { .. } => {
panic!("We should not get another HeaderReady!");
}
Http3ClientEvent::DataReadable { stream_id } => {
assert_eq!(stream_id, request_stream_id);
let mut buf = [0_u8; 100];
let res = client.read_data(now(), stream_id, &mut buf);
let (len, fin) = res.expect("should read");
assert_eq!(0, len);
assert!(fin);
}
_ => {}
};
}
// Stream should now be closed and gone
let mut buf = [0_u8; 100];
assert_eq!(
client.read_data(now(), StreamId::new(0), &mut buf),
Err(Error::InvalidStreamId)
);
}
#[test]
fn stream_fin_after_a_data_frame() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send some good data wo fin
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
false,
);
// Recv some good data wo fin
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} => {
assert_eq!(stream_id, request_stream_id);
check_response_header_2(&headers);
assert!(!fin);
assert!(!interim);
}
Http3ClientEvent::DataReadable { stream_id } => {
assert_eq!(stream_id, request_stream_id);
let mut buf = [0_u8; 100];
let res = client.read_data(now(), stream_id, &mut buf);
let (len, fin) = res.expect("should have data");
assert_eq!(len, EXPECTED_RESPONSE_DATA_2_FRAME_1.len());
assert_eq!(&buf[..len], EXPECTED_RESPONSE_DATA_2_FRAME_1);
assert!(!fin);
}
_ => {}
};
}
// ok NOW send fin
server.conn.stream_close_send(request_stream_id).unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// fin wo data should generate DataReadable
let e = client.events().next().unwrap();
if let Http3ClientEvent::DataReadable { stream_id } = e {
assert_eq!(stream_id, request_stream_id);
let mut buf = [0; 100];
let res = client.read_data(now(), stream_id, &mut buf);
let (len, fin) = res.expect("should read");
assert_eq!(0, len);
assert!(fin);
} else {
panic!("wrong event type");
}
// Stream should now be closed and gone
let mut buf = [0_u8; 100];
assert_eq!(
client.read_data(now(), StreamId::new(0), &mut buf),
Err(Error::InvalidStreamId)
);
}
#[test]
fn multiple_data_frames() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send two data frames with fin
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_1,
true,
);
// Read first frame
match client.events().nth(1).unwrap() {
Http3ClientEvent::DataReadable { stream_id } => {
assert_eq!(stream_id, request_stream_id);
let mut buf = [0_u8; 100];
assert_eq!(
(EXPECTED_RESPONSE_DATA_1.len(), true),
client.read_data(now(), stream_id, &mut buf).unwrap()
);
}
x => {
panic!("event {x:?}");
}
}
// Stream should now be closed and gone
let mut buf = [0_u8; 100];
assert_eq!(
client.read_data(now(), StreamId::new(0), &mut buf),
Err(Error::InvalidStreamId)
);
}
#[test]
fn receive_grease_before_response() {
// Construct an unknown frame.
const UNKNOWN_FRAME_LEN: usize = 832;
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
let mut enc = Encoder::with_capacity(UNKNOWN_FRAME_LEN + 4);
enc.encode_varint(1028_u64); // Arbitrary type.
enc.encode_varint(UNKNOWN_FRAME_LEN as u64);
let mut buf: Vec<_> = enc.into();
buf.resize(UNKNOWN_FRAME_LEN + buf.len(), 0);
_ = server.conn.stream_send(request_stream_id, &buf).unwrap();
// Send a headers and a data frame with fin
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
true,
);
// Read first frame
match client.events().nth(1).unwrap() {
Http3ClientEvent::DataReadable { stream_id } => {
assert_eq!(stream_id, request_stream_id);
let mut buf = [0_u8; 100];
let (len, fin) = client.read_data(now(), stream_id, &mut buf).unwrap();
assert_eq!(len, EXPECTED_RESPONSE_DATA_2_FRAME_1.len());
assert_eq!(&buf[..len], EXPECTED_RESPONSE_DATA_2_FRAME_1);
assert!(fin);
}
x => {
panic!("event {x:?}");
}
}
// Stream should now be closed and gone
let mut buf = [0_u8; 100];
assert_eq!(
client.read_data(now(), StreamId::new(0), &mut buf),
Err(Error::InvalidStreamId)
);
}
#[test]
fn read_frames_header_blocked() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let headers = vec![
Header::new(":status", "200"),
Header::new("my-header", "my-header"),
Header::new("content-length", "3"),
];
let encoded_headers = server.encoder.borrow_mut().encode_header_block(
&mut server.conn,
&headers,
request_stream_id,
);
let hframe = HFrame::Headers {
header_block: encoded_headers.to_vec(),
};
// Send the encoder instructions, but delay them so that the stream is blocked on decoding
// headers.
let encoder_inst_pkt = server.conn.process_output(now());
// Send response
let mut d = Encoder::default();
hframe.encode(&mut d);
let d_frame = HFrame::Data { len: 3 };
d_frame.encode(&mut d);
d.encode(&[0x61, 0x62, 0x63]);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
true,
);
let header_ready_event = |e| matches!(e, Http3ClientEvent::HeaderReady { .. });
assert!(!client.events().any(header_ready_event));
// Let client receive the encoder instructions.
mem::drop(client.process(encoder_inst_pkt.dgram(), now()));
let out = server.conn.process_output(now());
mem::drop(client.process(out.dgram(), now()));
mem::drop(client.process_output(now()));
let mut recv_header = false;
let mut recv_data = false;
// Now the stream is unblocked and both headers and data will be consumed.
while let Some(e) = client.next_event() {
match e {
Http3ClientEvent::HeaderReady { stream_id, .. } => {
assert_eq!(stream_id, request_stream_id);
recv_header = true;
}
Http3ClientEvent::DataReadable { stream_id } => {
recv_data = true;
assert_eq!(stream_id, request_stream_id);
}
x => {
panic!("event {x:?}");
}
}
}
assert!(recv_header && recv_data);
}
#[test]
fn read_frames_header_blocked_with_fin_after_headers() {
let (mut hconn, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut hconn, &mut server);
let sent_headers = vec![
Header::new(":status", "200"),
Header::new("my-header", "my-header"),
Header::new("content-length", "0"),
];
let encoded_headers = server.encoder.borrow_mut().encode_header_block(
&mut server.conn,
&sent_headers,
request_stream_id,
);
let hframe = HFrame::Headers {
header_block: encoded_headers.to_vec(),
};
// Send the encoder instructions, but delay them so that the stream is blocked on decoding
// headers.
let encoder_inst_pkt = server.conn.process_output(now());
let mut d = Encoder::default();
hframe.encode(&mut d);
server_send_response_and_exchange_packet(
&mut hconn,
&mut server,
request_stream_id,
&d,
true,
);
let header_ready_event = |e| matches!(e, Http3ClientEvent::HeaderReady { .. });
assert!(!hconn.events().any(header_ready_event));
// Let client receive the encoder instructions.
let _out = hconn.process(encoder_inst_pkt.dgram(), now());
let mut recv_header = false;
// Now the stream is unblocked. After headers we will receive a fin.
while let Some(e) = hconn.next_event() {
if let Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} = e
{
assert_eq!(stream_id, request_stream_id);
assert_eq!(headers.as_ref(), sent_headers);
assert!(fin);
assert!(!interim);
recv_header = true;
} else {
panic!("event {e:?}");
}
}
assert!(recv_header);
}
fn exchange_token(client: &mut Http3Client, server: &mut Connection) -> ResumptionToken {
server.send_ticket(now(), &[]).expect("can send ticket");
let out = server.process_output(now());
assert!(out.as_dgram_ref().is_some());
client.process_input(out.dgram().unwrap(), now());
// We do not have a token so we need to wait for a resumption token timer to trigger.
client.process_output(now() + Duration::from_millis(250));
assert_eq!(client.state(), Http3State::Connected);
client
.events()
.find_map(|e| {
if let Http3ClientEvent::ResumptionToken(token) = e {
Some(token)
} else {
None
}
})
.unwrap()
}
fn start_with_0rtt() -> (Http3Client, TestServer) {
let (mut client, mut server) = connect();
let token = exchange_token(&mut client, &mut server.conn);
let mut client = default_http3_client();
let server = TestServer::new();
assert_eq!(client.state(), Http3State::Initializing);
client
.enable_resumption(now(), &token)
.expect("Set resumption token.");
assert_eq!(client.state(), Http3State::ZeroRtt);
let zerortt_event = |e| matches!(e, Http3ClientEvent::StateChange(Http3State::ZeroRtt));
assert!(client.events().any(zerortt_event));
(client, server)
}
#[test]
fn zero_rtt_negotiated() {
let (mut client, mut server) = start_with_0rtt();
let out = client.process_output(now());
assert_eq!(client.state(), Http3State::ZeroRtt);
assert_eq!(*server.conn.state(), State::Init);
let out = server.conn.process(out.dgram(), now());
// Check that control and qpack streams are received and a
// SETTINGS frame has been received.
// Also qpack encoder stream will send "change capacity" instruction because it has
// the peer settings already.
server.check_control_qpack_request_streams_resumption(
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
EXPECTED_REQUEST_HEADER_FRAME,
false,
);
assert_eq!(*server.conn.state(), State::Handshaking);
let out = client.process(out.dgram(), now());
assert_eq!(client.state(), Http3State::Connected);
mem::drop(server.conn.process(out.dgram(), now()));
assert!(server.conn.state().connected());
assert!(client.tls_info().unwrap().resumed());
assert!(server.conn.tls_info().unwrap().resumed());
}
#[test]
fn zero_rtt_send_request() {
let (mut client, mut server) = start_with_0rtt();
let request_stream_id =
make_request(&mut client, true, &[Header::new("myheaders", "myvalue")]);
assert_eq!(request_stream_id, 0);
let out = client.process_output(now());
assert_eq!(client.state(), Http3State::ZeroRtt);
assert_eq!(*server.conn.state(), State::Init);
let out = server.conn.process(out.dgram(), now());
// Check that control and qpack streams are received and a
// SETTINGS frame has been received.
// Also qpack encoder stream will send "change capacity" instruction because it has
// the peer settings already.
server.check_control_qpack_request_streams_resumption(
ENCODER_STREAM_DATA_WITH_CAP_INST_AND_ENCODING_INST,
EXPECTED_REQUEST_HEADER_FRAME_VERSION2,
true,
);
assert_eq!(*server.conn.state(), State::Handshaking);
let out = client.process(out.dgram(), now());
assert_eq!(client.state(), Http3State::Connected);
let out = server.conn.process(out.dgram(), now());
assert!(server.conn.state().connected());
let out = client.process(out.dgram(), now());
assert!(out.dgram().is_none());
// After the server has been connected, send a response.
let res = server.conn.stream_send(request_stream_id, HTTP_RESPONSE_2);
assert_eq!(res, Ok(HTTP_RESPONSE_2.len()));
server.conn.stream_close_send(request_stream_id).unwrap();
read_response(&mut client, &mut server.conn, request_stream_id);
assert!(client.tls_info().unwrap().resumed());
assert!(server.conn.tls_info().unwrap().resumed());
}
#[test]
fn zero_rtt_before_resumption_token() {
let mut client = default_http3_client();
assert!(client
.fetch(
now(),
"GET",
&("https", "something.com", "/"),
&[],
Priority::default()
)
.is_err());
}
#[test]
fn zero_rtt_send_reject() {
let (mut client, mut server) = connect();
let token = exchange_token(&mut client, &mut server.conn);
let mut client = default_http3_client();
let mut server = Connection::new_server(
test_fixture::DEFAULT_KEYS,
test_fixture::DEFAULT_ALPN_H3,
Rc::new(RefCell::new(CountingConnectionIdGenerator::default())),
ConnectionParameters::default(),
)
.unwrap();
// Using a freshly initialized anti-replay context
// should result in the server rejecting 0-RTT.
let ar = AntiReplay::new(now(), test_fixture::ANTI_REPLAY_WINDOW, 1, 3)
.expect("setup anti-replay");
server
.server_enable_0rtt(&ar, AllowZeroRtt {})
.expect("enable 0-RTT");
assert_eq!(client.state(), Http3State::Initializing);
client
.enable_resumption(now(), &token)
.expect("Set resumption token.");
let zerortt_event = |e| matches!(e, Http3ClientEvent::StateChange(Http3State::ZeroRtt));
assert!(client.events().any(zerortt_event));
// Send ClientHello.
let client_hs = client.process_output(now());
assert!(client_hs.as_dgram_ref().is_some());
// Create a request
let request_stream_id = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id, 0);
let client_0rtt = client.process_output(now());
assert!(client_0rtt.as_dgram_ref().is_some());
let server_hs = server.process(client_hs.dgram(), now());
assert!(server_hs.as_dgram_ref().is_some()); // Should produce ServerHello etc...
let server_ignored = server.process(client_0rtt.dgram(), now());
assert!(server_ignored.as_dgram_ref().is_none());
// The server shouldn't receive that 0-RTT data.
let recvd_stream_evt = |e| matches!(e, ConnectionEvent::NewStream { .. });
assert!(!server.events().any(recvd_stream_evt));
// Client should get a rejection.
let client_out = client.process(server_hs.dgram(), now());
assert!(client_out.as_dgram_ref().is_some());
let recvd_0rtt_reject = |e| e == Http3ClientEvent::ZeroRttRejected;
assert!(client.events().any(recvd_0rtt_reject));
// ...and the client stream should be gone.
let res = client.stream_close_send(request_stream_id);
assert!(res.is_err());
assert_eq!(res.unwrap_err(), Error::InvalidStreamId);
// Client will send Setting frame and open new qpack streams.
mem::drop(server.process(client_out.dgram(), now()));
TestServer::new_with_conn(server).check_client_control_qpack_streams_no_resumption();
// Check that we can send a request and that the stream_id starts again from 0.
assert_eq!(make_request(&mut client, false, &[]), 0);
}
// Connect to a server, get token and reconnect using 0-rtt. Seerver sends new Settings.
fn zero_rtt_change_settings(
original_settings: &[HSetting],
resumption_settings: &[HSetting],
expected_client_state: &Http3State,
expected_encoder_stream_data: &[u8],
) {
let mut client = default_http3_client();
let mut server = TestServer::new_with_settings(original_settings);
// Connect and get a token
connect_with(&mut client, &mut server);
let token = exchange_token(&mut client, &mut server.conn);
let mut client = default_http3_client();
let mut server = TestServer::new_with_settings(resumption_settings);
assert_eq!(client.state(), Http3State::Initializing);
client
.enable_resumption(now(), &token)
.expect("Set resumption token.");
assert_eq!(client.state(), Http3State::ZeroRtt);
let out = client.process_output(now());
assert_eq!(client.state(), Http3State::ZeroRtt);
assert_eq!(*server.conn.state(), State::Init);
let out = server.conn.process(out.dgram(), now());
// Check that control and qpack streams and a SETTINGS frame are received.
// Also qpack encoder stream will send "change capacity" instruction because it has
// the peer settings already.
server.check_control_qpack_request_streams_resumption(
expected_encoder_stream_data,
EXPECTED_REQUEST_HEADER_FRAME,
false,
);
assert_eq!(*server.conn.state(), State::Handshaking);
let out = client.process(out.dgram(), now());
assert_eq!(client.state(), Http3State::Connected);
mem::drop(server.conn.process(out.dgram(), now()));
assert!(server.conn.state().connected());
assert!(client.tls_info().unwrap().resumed());
assert!(server.conn.tls_info().unwrap().resumed());
// Send new settings.
let control_stream = server.conn.stream_create(StreamType::UniDi).unwrap();
let mut enc = Encoder::default();
server.settings.encode(&mut enc);
let mut sent = server.conn.stream_send(control_stream, CONTROL_STREAM_TYPE);
assert_eq!(sent.unwrap(), CONTROL_STREAM_TYPE.len());
sent = server.conn.stream_send(control_stream, enc.as_ref());
assert_eq!(sent.unwrap(), enc.len());
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_eq!(&client.state(), expected_client_state);
assert!(server.conn.state().connected());
}
#[test]
fn zero_rtt_new_server_setting_are_the_same() {
// Send a new server settings that are the same as the old one.
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&Http3State::Connected,
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_new_server_setting_omit_max_table() {
// Send a new server settings without MaxTableCapacity
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&Http3State::Closing(CloseReason::Application(265)),
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_new_server_setting_omit_blocked_streams() {
// Send a new server settings without BlockedStreams
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&Http3State::Closing(CloseReason::Application(265)),
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_new_server_setting_omit_header_list_size() {
// Send a new server settings without MaxHeaderListSize
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
],
&Http3State::Connected,
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_new_server_setting_max_table_size_bigger() {
// Send a new server settings MaxTableCapacity=200
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 200),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&Http3State::Closing(CloseReason::Application(514)),
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_new_server_setting_max_table_size_smaller() {
// Send a new server settings MaxTableCapacity=50
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 50),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&Http3State::Closing(CloseReason::Application(265)),
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_new_server_setting_blocked_streams_bigger() {
// Send a new server settings withBlockedStreams=200
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 200),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&Http3State::Connected,
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_new_server_setting_blocked_streams_smaller() {
// Send a new server settings withBlockedStreams=50
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 50),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&Http3State::Closing(CloseReason::Application(265)),
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_new_server_setting_max_header_size_bigger() {
// Send a new server settings with MaxHeaderListSize=20000
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 20000),
],
&Http3State::Connected,
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_new_server_setting_max_headers_size_smaller() {
// Send the new server settings with MaxHeaderListSize=5000
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 5000),
],
&Http3State::Closing(CloseReason::Application(265)),
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_max_table_size_first_omitted() {
// send server original settings without MaxTableCapacity
// send new server setting with MaxTableCapacity
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&Http3State::Connected,
ENCODER_STREAM_DATA,
);
}
#[test]
fn zero_rtt_blocked_streams_first_omitted() {
// Send server original settings without BlockedStreams
// Send the new server settings with BlockedStreams
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&Http3State::Connected,
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn zero_rtt_max_header_size_first_omitted() {
// Send server settings without MaxHeaderListSize
// Send new settings with MaxHeaderListSize.
zero_rtt_change_settings(
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 10000),
],
&[
HSetting::new(HSettingType::MaxTableCapacity, 100),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
],
&Http3State::Closing(CloseReason::Application(265)),
ENCODER_STREAM_DATA_WITH_CAP_INSTRUCTION,
);
}
#[test]
fn trailers_with_fin_after_headers() {
// Make a new connection.
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send HEADER frame.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_HEADER_FRAME_0,
false,
);
// Check response headers.
let mut response_headers = false;
while let Some(e) = client.next_event() {
if let Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} = e
{
assert_eq!(stream_id, request_stream_id);
check_response_header_0(&headers);
assert!(!fin);
assert!(!interim);
response_headers = true;
}
}
assert!(response_headers);
// Send trailers
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_HEADER_FRAME_0,
true,
);
let events: Vec<Http3ClientEvent> = client.events().collect();
// We already had HeaderReady
let header_ready: fn(&Http3ClientEvent) -> _ =
|e| matches!(*e, Http3ClientEvent::HeaderReady { .. });
assert!(!events.iter().any(header_ready));
// Check that we have a DataReady event. Reading from the stream will return fin=true.
let data_readable: fn(&Http3ClientEvent) -> _ =
|e| matches!(*e, Http3ClientEvent::DataReadable { .. });
assert!(events.iter().any(data_readable));
let mut buf = [0_u8; 100];
let (len, fin) = client
.read_data(now(), request_stream_id, &mut buf)
.unwrap();
assert_eq!(0, len);
assert!(fin);
}
#[test]
fn trailers_with_later_fin_after_headers() {
// Make a new connection.
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send HEADER frame.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_HEADER_FRAME_0,
false,
);
// Check response headers.
let mut response_headers = false;
while let Some(e) = client.next_event() {
if let Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} = e
{
assert_eq!(stream_id, request_stream_id);
check_response_header_0(&headers);
assert!(!fin);
assert!(!interim);
response_headers = true;
}
}
assert!(response_headers);
// Send trailers
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_HEADER_FRAME_0,
false,
);
// Check that we do not have a DataReady event.
let data_readable = |e| matches!(e, Http3ClientEvent::DataReadable { .. });
assert!(!client.events().any(data_readable));
server.conn.stream_close_send(request_stream_id).unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
let events: Vec<Http3ClientEvent> = client.events().collect();
// We already had HeaderReady
let header_ready: fn(&Http3ClientEvent) -> _ =
|e| matches!(*e, Http3ClientEvent::HeaderReady { .. });
assert!(!events.iter().any(header_ready));
// Check that we have a DataReady event. Reading from the stream will return fin=true.
let data_readable_fn: fn(&Http3ClientEvent) -> _ =
|e| matches!(*e, Http3ClientEvent::DataReadable { .. });
assert!(events.iter().any(data_readable_fn));
let mut buf = [0_u8; 100];
let (len, fin) = client
.read_data(now(), request_stream_id, &mut buf)
.unwrap();
assert_eq!(0, len);
assert!(fin);
}
#[test]
fn data_after_trailers_after_headers() {
// Make a new connection.
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send HEADER frame.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_HEADER_FRAME_0,
false,
);
// Check response headers.
let mut response_headers = false;
while let Some(e) = client.next_event() {
if let Http3ClientEvent::HeaderReady {
stream_id,
headers,
interim,
fin,
} = e
{
assert_eq!(stream_id, request_stream_id);
check_response_header_0(&headers);
assert!(!fin);
assert!(!interim);
response_headers = true;
}
}
assert!(response_headers);
// Send trailers
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_HEADER_FRAME_0,
false,
);
// Check that we do not have a DataReady event.
let data_readable = |e| matches!(e, Http3ClientEvent::DataReadable { .. });
assert!(!client.events().any(data_readable));
// Send Data frame.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
[0x0, 0x3, 0x61, 0x62, 0x63], // a data frame
false,
);
assert_closed(&client, &Error::HttpFrameUnexpected);
}
#[test]
fn transport_stream_readable_event_after_all_data() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(false);
// Send headers.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
false,
);
// Send an empty data frame and a fin
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
[0x0, 0x0],
true,
);
let mut buf = [0_u8; 100];
assert_eq!(
client.read_data(now(), StreamId::new(0), &mut buf),
Ok((3, true))
);
client.process_output(now());
}
#[test]
fn no_data_ready_events_after_fin() {
// Connect exchange headers and send a request. Also check if the correct header frame has
// been sent.
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// send response - 200 Content-Length: 7
// with content: 'abcdefg'.
// The content will be send in 2 DATA frames.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_1,
true,
);
let data_readable_event = |e| matches!(e, Http3ClientEvent::DataReadable { stream_id } if stream_id == request_stream_id);
assert!(client.events().any(data_readable_event));
let mut buf = [0_u8; 100];
assert_eq!(
(EXPECTED_RESPONSE_DATA_1.len(), true),
client
.read_data(now(), request_stream_id, &mut buf)
.unwrap()
);
assert!(!client.events().any(data_readable_event));
}
#[test]
fn reading_small_chunks_of_data() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// send response - 200 Content-Length: 7
// with content: 'abcdefg'.
// The content will be send in 2 DATA frames.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_1,
true,
);
let data_readable_event = |e| matches!(e, Http3ClientEvent::DataReadable { stream_id } if stream_id == request_stream_id);
assert!(client.events().any(data_readable_event));
let mut buf1 = [0_u8; 1];
assert_eq!(
(1, false),
client
.read_data(now(), request_stream_id, &mut buf1)
.unwrap()
);
assert!(!client.events().any(data_readable_event));
// Now read only until the end of the first frame. The firs framee has 3 bytes.
let mut buf2 = [0_u8; 2];
assert_eq!(
(2, false),
client
.read_data(now(), request_stream_id, &mut buf2)
.unwrap()
);
assert!(!client.events().any(data_readable_event));
// Read a half of the second frame.
assert_eq!(
(2, false),
client
.read_data(now(), request_stream_id, &mut buf2)
.unwrap()
);
assert!(!client.events().any(data_readable_event));
// Read the rest.
// Read a half of the second frame.
assert_eq!(
(2, true),
client
.read_data(now(), request_stream_id, &mut buf2)
.unwrap()
);
assert!(!client.events().any(data_readable_event));
}
#[test]
fn zero_length_data_at_end() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// send response - 200 Content-Length: 7
// with content: 'abcdefg'.
// The content will be send in 2 DATA frames.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_1,
false,
);
// Send a zero-length frame at the end of the stream.
_ = server.conn.stream_send(request_stream_id, &[0, 0]).unwrap();
server.conn.stream_close_send(request_stream_id).unwrap();
let dgram = server.conn.process_output(now()).dgram();
client.process_input(dgram.unwrap(), now());
let data_readable_event = |e: &_| matches!(e, Http3ClientEvent::DataReadable { stream_id } if *stream_id == request_stream_id);
assert_eq!(client.events().filter(data_readable_event).count(), 1);
let mut buf = [0_u8; 10];
assert_eq!(
(7, true),
client
.read_data(now(), request_stream_id, &mut buf)
.unwrap()
);
assert!(!client.events().any(|e| data_readable_event(&e)));
}
#[test]
fn stream_blocked_no_remote_encoder_stream() {
let (mut client, mut server) = connect_only_transport();
send_and_receive_client_settings(&mut client, &mut server);
server.create_control_stream();
// Send the server's control stream data.
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
server.create_qpack_streams();
let qpack_pkt1 = server.conn.process_output(now());
// delay delivery of this packet.
let request_stream_id = make_request(&mut client, true, &[]);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
setup_server_side_encoder(&mut client, &mut server);
let headers = vec![
Header::new(":status", "200"),
Header::new("my-header", "my-header"),
Header::new("content-length", "3"),
];
let encoded_headers = server.encoder.borrow_mut().encode_header_block(
&mut server.conn,
&headers,
request_stream_id,
);
let hframe = HFrame::Headers {
header_block: encoded_headers.to_vec(),
};
// Send the encoder instructions,
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// Send response
let mut d = Encoder::default();
hframe.encode(&mut d);
let d_frame = HFrame::Data { len: 3 };
d_frame.encode(&mut d);
d.encode(&[0x61, 0x62, 0x63]);
_ = server
.conn
.stream_send(request_stream_id, d.as_ref())
.unwrap();
server.conn.stream_close_send(request_stream_id).unwrap();
let out = server.conn.process_output(now());
mem::drop(client.process(out.dgram(), now()));
let header_ready_event = |e| matches!(e, Http3ClientEvent::HeaderReady { .. });
assert!(!client.events().any(header_ready_event));
// Let client receive the encoder instructions.
mem::drop(client.process(qpack_pkt1.dgram(), now()));
assert!(client.events().any(header_ready_event));
}
// Client: receive a push stream
#[test]
fn push_single() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send a push promise.
send_push_promise(&mut server.conn, request_stream_id, 0);
// create a push stream.
_ = send_push_data(&mut server.conn, 0, true);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
true,
);
read_response_and_push_events(
&mut client,
&[PushPromiseInfo {
push_id: 0,
ref_stream_id: request_stream_id,
}],
&[0],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
// Check that the push has been closed, e.g. calling cancel_push should return
// InvalidStreamId.
assert_eq!(client.cancel_push(0), Err(Error::InvalidStreamId));
}
/// We can't keep the connection alive on the basis of a push promise,
/// nor do we want to if the push promise is not interesting to the client.
/// We do the next best thing, which is keep any push stream alive if the
/// client reads from it.
#[test]
fn push_keep_alive() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
let idle_timeout = ConnectionParameters::default().get_idle_timeout();
// Promise a push and deliver, but don't close the stream.
send_push_promise(&mut server.conn, request_stream_id, 0);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
true,
);
read_response_and_push_events(
&mut client,
&[PushPromiseInfo {
push_id: 0,
ref_stream_id: request_stream_id,
}],
&[], // No push streams yet.
request_stream_id,
);
// The client will become idle here.
force_idle(&mut client, &mut server);
assert_eq!(client.process_output(now()).callback(), idle_timeout);
// Reading push data will stop the client from being idle.
_ = send_push_data(&mut server.conn, 0, false);
let out = server.conn.process_output(now());
client.process_input(out.dgram().unwrap(), now());
let mut buf = [0; 16];
let (read, fin) = client.push_read_data(now(), 0, &mut buf).unwrap();
assert!(read < buf.len());
assert!(!fin);
force_idle(&mut client, &mut server);
assert_eq!(client.process_output(now()).callback(), idle_timeout / 2);
}
#[test]
fn push_multiple() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send a push promise.
send_push_promise(&mut server.conn, request_stream_id, 0);
send_push_promise(&mut server.conn, request_stream_id, 1);
// create a push stream.
_ = send_push_data(&mut server.conn, 0, true);
// create a second push stream.
_ = send_push_data(&mut server.conn, 1, true);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
true,
);
read_response_and_push_events(
&mut client,
&[
PushPromiseInfo {
push_id: 0,
ref_stream_id: request_stream_id,
},
PushPromiseInfo {
push_id: 1,
ref_stream_id: request_stream_id,
},
],
&[0, 1],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
// Check that the push has been closed, e.g. calling cancel_push should return
// InvalidStreamId.
assert_eq!(client.cancel_push(0), Err(Error::InvalidStreamId));
assert_eq!(client.cancel_push(1), Err(Error::InvalidStreamId));
}
#[test]
fn push_after_headers() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send response headers
_ = server
.conn
.stream_send(request_stream_id, HTTP_RESPONSE_HEADER_ONLY_2)
.unwrap();
// Send a push promise.
send_push_promise(&mut server.conn, request_stream_id, 0);
// create a push stream.
_ = send_push_data(&mut server.conn, 0, true);
// Send response data
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_DATA_FRAME_ONLY_2,
true,
);
read_response_and_push_events(
&mut client,
&[PushPromiseInfo {
push_id: 0,
ref_stream_id: request_stream_id,
}],
&[0],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
}
#[test]
fn push_after_response() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send response headers and data frames
_ = server
.conn
.stream_send(request_stream_id, HTTP_RESPONSE_2)
.unwrap();
// Send a push promise.
send_push_promise(&mut server.conn, request_stream_id, 0);
// create a push stream.
send_push_data_and_exchange_packets(&mut client, &mut server, 0, true);
read_response_and_push_events(
&mut client,
&[PushPromiseInfo {
push_id: 0,
ref_stream_id: request_stream_id,
}],
&[0],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
}
fn check_push_events(client: &mut Http3Client) -> bool {
let any_push_event = |e| {
matches!(
e,
Http3ClientEvent::PushPromise { .. }
| Http3ClientEvent::PushHeaderReady { .. }
| Http3ClientEvent::PushDataReadable { .. }
)
};
client.events().any(any_push_event)
}
fn check_data_readable(client: &mut Http3Client) -> bool {
let any_data_event = |e| matches!(e, Http3ClientEvent::DataReadable { .. });
client.events().any(any_data_event)
}
fn check_header_ready(client: &mut Http3Client) -> bool {
let any_event = |e| matches!(e, Http3ClientEvent::HeaderReady { .. });
client.events().any(any_event)
}
fn check_header_ready_and_push_promise(client: &mut Http3Client) -> bool {
let any_event = |e| {
matches!(
e,
Http3ClientEvent::HeaderReady { .. } | Http3ClientEvent::PushPromise { .. }
)
};
client.events().any(any_event)
}
#[test]
fn push_stream_before_promise() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// create a push stream.
send_push_data_and_exchange_packets(&mut client, &mut server, 0, true);
// Assert that we do not have any push event.
assert!(!check_push_events(&mut client));
// Now send push_promise
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 0);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
true,
);
read_response_and_push_events(
&mut client,
&[PushPromiseInfo {
push_id: 0,
ref_stream_id: request_stream_id,
}],
&[0],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
}
// Test receiving pushes out of order.
// Push_id 5 is received first, therefore Push_id 3 will be in the PushState:Init state.
// Start push_id 3 by receiving a push_promise and then a push stream with the push_id 3.
#[test]
fn push_out_of_order_1() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 5);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 3);
// Start a push stream with push_id 3.
send_push_data_and_exchange_packets(&mut client, &mut server, 3, true);
assert_eq!(client.state(), Http3State::Connected);
read_response_and_push_events(
&mut client,
&[
PushPromiseInfo {
push_id: 5,
ref_stream_id: request_stream_id,
},
PushPromiseInfo {
push_id: 3,
ref_stream_id: request_stream_id,
},
],
&[3],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
}
// Test receiving pushes out of order.
// Push_id 5 is received first, therefore Push_id 3 will be in the PushState:Init state.
// Start push_id 3 by receiving a push stream with push_id 3 and then a push_promise.
#[test]
fn push_out_of_order_2() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 5);
send_push_data_and_exchange_packets(&mut client, &mut server, 3, true);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 3);
read_response_and_push_events(
&mut client,
&[
PushPromiseInfo {
push_id: 5,
ref_stream_id: request_stream_id,
},
PushPromiseInfo {
push_id: 3,
ref_stream_id: request_stream_id,
},
],
&[3],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
}
// Test receiving pushes out of order.
// Push_id 5 is received first and read so that it is removed from the list,
// therefore Push_id 3 will be in the PushState:Init state.
// Start push_id 3 by receiving a push stream with the push_id 3 and then a push_promise.
#[test]
fn push_out_of_order_3() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 5);
send_push_data_and_exchange_packets(&mut client, &mut server, 5, true);
assert_eq!(client.state(), Http3State::Connected);
// Read push stream with push_id 5 to make it change to closed state.
read_response_and_push_events(
&mut client,
&[PushPromiseInfo {
push_id: 5,
ref_stream_id: request_stream_id,
}],
&[5],
request_stream_id,
);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 3);
send_push_data_and_exchange_packets(&mut client, &mut server, 3, true);
read_response_and_push_events(
&mut client,
&[PushPromiseInfo {
push_id: 3,
ref_stream_id: request_stream_id,
}],
&[3],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
}
// The next test is for receiving a second PushPromise when Push is in the PushPromise state.
#[test]
fn multiple_push_promise() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 5);
// make a second request.
let request_stream_id_2 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_2, 4);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id_2, 5);
read_response_and_push_events(
&mut client,
&[
PushPromiseInfo {
push_id: 5,
ref_stream_id: request_stream_id,
},
PushPromiseInfo {
push_id: 5,
ref_stream_id: request_stream_id_2,
},
],
&[],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
}
// The next test is for receiving a second PushPromise when Push is in the Active state.
#[test]
fn multiple_push_promise_active() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 5);
send_push_data_and_exchange_packets(&mut client, &mut server, 5, true);
// make a second request.
let request_stream_id_2 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_2, 4);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id_2, 5);
read_response_and_push_events(
&mut client,
&[
PushPromiseInfo {
push_id: 5,
ref_stream_id: request_stream_id,
},
PushPromiseInfo {
push_id: 5,
ref_stream_id: request_stream_id_2,
},
],
&[5],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
}
// The next test is for receiving a second PushPromise when the push is already closed.
// PushPromise will be ignored for the push streams that are consumed.
#[test]
fn multiple_push_promise_closed() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 5);
// Start a push stream with push_id 5.
send_push_data_and_exchange_packets(&mut client, &mut server, 5, true);
read_response_and_push_events(
&mut client,
&[PushPromiseInfo {
push_id: 5,
ref_stream_id: request_stream_id,
}],
&[5],
request_stream_id,
);
// make a second request.
let request_stream_id_2 = make_request(&mut client, false, &[]);
assert_eq!(request_stream_id_2, 4);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id_2, 5);
// Check that we do not have a Http3ClientEvent::PushPromise.
let push_event = |e| matches!(e, Http3ClientEvent::PushPromise { .. });
assert!(!client.events().any(push_event));
}
// Test that max_push_id is enforced when a push promise frame is received.
#[test]
fn exceed_max_push_id_promise() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send a push promise. max_push_id is set to 5, to trigger an error we send push_id=6.
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 6);
assert_closed(&client, &Error::HttpId);
}
// Test that max_push_id is enforced when a push stream is received.
#[test]
fn exceed_max_push_id_push_stream() {
// Connect and send a request
let (mut client, mut server) = connect();
// Send a push stream. max_push_id is set to 5, to trigger an error we send push_id=6.
send_push_data_and_exchange_packets(&mut client, &mut server, 6, true);
assert_closed(&client, &Error::HttpId);
}
// Test that max_push_id is enforced when a cancel push frame is received.
#[test]
fn exceed_max_push_id_cancel_push() {
// Connect and send a request
let (mut client, mut server, _request_stream_id) = connect_and_send_request(true);
// Send CANCEL_PUSH for push_id 6.
send_cancel_push_and_exchange_packets(&mut client, &mut server, 6);
assert_closed(&client, &Error::HttpId);
}
// Test that max_push_id is enforced when an app calls cancel_push.
#[test]
fn exceed_max_push_id_cancel_api() {
// Connect and send a request
let (mut client, _, _) = connect_and_send_request(true);
assert_eq!(client.cancel_push(6), Err(Error::HttpId));
assert_eq!(client.state(), Http3State::Connected);
}
#[test]
fn max_push_id_frame_update_is_sent() {
const MAX_PUSH_ID_FRAME: &[u8] = &[0xd, 0x1, 0x8];
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send 3 push promises.
send_push_promise(&mut server.conn, request_stream_id, 0);
send_push_promise(&mut server.conn, request_stream_id, 1);
send_push_promise(&mut server.conn, request_stream_id, 2);
// create 3 push streams.
send_push_data(&mut server.conn, 0, true);
send_push_data(&mut server.conn, 1, true);
send_push_data_and_exchange_packets(&mut client, &mut server, 2, true);
read_response_and_push_events(
&mut client,
&[
PushPromiseInfo {
push_id: 0,
ref_stream_id: request_stream_id,
},
PushPromiseInfo {
push_id: 1,
ref_stream_id: request_stream_id,
},
PushPromiseInfo {
push_id: 2,
ref_stream_id: request_stream_id,
},
],
&[0, 1, 2],
request_stream_id,
);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
// Check max_push_id frame has been received
let control_stream_readable =
|e| matches!(e, ConnectionEvent::RecvStreamReadable{stream_id: x} if x == 2);
assert!(server.conn.events().any(control_stream_readable));
let mut buf = [0_u8; 100];
let (amount, fin) = server.conn.stream_recv(StreamId::new(2), &mut buf).unwrap();
assert!(!fin);
assert_eq!(amount, MAX_PUSH_ID_FRAME.len());
assert_eq!(&buf[..3], MAX_PUSH_ID_FRAME);
// Check that we can send push_id=8 now
send_push_promise(&mut server.conn, request_stream_id, 8);
send_push_data(&mut server.conn, 8, true);
let out = server.conn.process_output(now());
let out = client.process(out.dgram(), now());
mem::drop(server.conn.process(out.dgram(), now()));
assert_eq!(client.state(), Http3State::Connected);
read_response_and_push_events(
&mut client,
&[PushPromiseInfo {
push_id: 8,
ref_stream_id: request_stream_id,
}],
&[8],
request_stream_id,
);
assert_eq!(client.state(), Http3State::Connected);
}
// Test that 2 push streams with the same push_id are caught.
#[test]
fn duplicate_push_stream() {
// Connect and send a request
let (mut client, mut server, _request_stream_id) = connect_and_send_request(true);
// Start a push stream with push_id 0.
send_push_data_and_exchange_packets(&mut client, &mut server, 0, true);
// Send it again
send_push_data_and_exchange_packets(&mut client, &mut server, 0, true);
assert_closed(&client, &Error::HttpId);
}
// Test that 2 push streams with the same push_id are caught.
#[test]
fn duplicate_push_stream_active() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise(&mut server.conn, request_stream_id, 0);
send_push_data_and_exchange_packets(&mut client, &mut server, 0, true);
// Now the push_stream is in the PushState::Active state
send_push_data_and_exchange_packets(&mut client, &mut server, 0, true);
assert_closed(&client, &Error::HttpId);
}
fn assert_stop_sending_event(
server: &mut TestServer,
push_stream_id: StreamId,
expected_error: u64,
) {
assert!(server.conn.events().any(|e| matches!(
e,
ConnectionEvent::SendStreamStopSending {
stream_id,
app_error,
} if stream_id == push_stream_id && app_error == expected_error
)));
}
// Test CANCEL_PUSH frame: after cancel push any new PUSH_PROMISE or push stream will be
// ignored.
#[test]
fn cancel_push_ignore_promise() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_cancel_push_and_exchange_packets(&mut client, &mut server, 0);
send_push_promise(&mut server.conn, request_stream_id, 0);
// Start a push stream with push_id 0.
let push_stream_id =
send_push_data_and_exchange_packets(&mut client, &mut server, 0, false);
// Assert that we do not have any push event.
assert!(!check_push_events(&mut client));
// Check that the push has been closed, e.g. calling cancel_push should return
// InvalidStreamId.
assert_eq!(client.cancel_push(0), Err(Error::InvalidStreamId));
// Check that the push has been canceled by the client.
assert_stop_sending_event(
&mut server,
push_stream_id,
Error::HttpRequestCancelled.code(),
);
assert_eq!(client.state(), Http3State::Connected);
}
// Test CANCEL_PUSH frame: after cancel push any already received PUSH_PROMISE or push stream
// events will be removed.
#[test]
fn cancel_push_removes_push_events() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise(&mut server.conn, request_stream_id, 0);
let push_stream_id =
send_push_data_and_exchange_packets(&mut client, &mut server, 0, false);
send_cancel_push_and_exchange_packets(&mut client, &mut server, 0);
// Assert that we do not have any push event.
assert!(!check_push_events(&mut client));
// Check that the push has been closed, e.g. calling cancel_push should return
// InvalidStreamId.
assert_eq!(client.cancel_push(0), Err(Error::InvalidStreamId));
// Check that the push has been canceled by the client.
assert_stop_sending_event(
&mut server,
push_stream_id,
Error::HttpRequestCancelled.code(),
);
assert_eq!(client.state(), Http3State::Connected);
}
// Test CANCEL_PUSH frame: after cancel push any already received push stream will be canceled.
#[test]
fn cancel_push_frame_after_push_stream() {
// Connect and send a request
let (mut client, mut server, _) = connect_and_send_request(true);
// Start a push stream with push_id 0.
let push_stream_id =
send_push_data_and_exchange_packets(&mut client, &mut server, 0, false);
send_cancel_push_and_exchange_packets(&mut client, &mut server, 0);
// Assert that we do not have any push event.
assert!(!check_push_events(&mut client));
// Check that the push has been closed, e.g. calling cancel_push should return
// InvalidStreamId.
assert_eq!(client.cancel_push(0), Err(Error::InvalidStreamId));
// Check that the push has been canceled by the client.
assert_stop_sending_event(
&mut server,
push_stream_id,
Error::HttpRequestCancelled.code(),
);
assert_eq!(client.state(), Http3State::Connected);
}
// Test a push stream reset after a new PUSH_PROMISE or/and push stream. The events will be
// ignored.
#[test]
fn cancel_push_stream_after_push_promise_and_push_stream() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise(&mut server.conn, request_stream_id, 0);
// Start a push stream with push_id 0.
let push_stream_id =
send_push_data_and_exchange_packets(&mut client, &mut server, 0, false);
server
.conn
.stream_reset_send(push_stream_id, Error::HttpRequestCancelled.code())
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
// Assert that we do not have any push event.
assert!(!check_push_events(&mut client));
// Check that the push has been closed, e.g. calling cancel_push should return
// InvalidStreamId.
assert_eq!(client.cancel_push(0), Err(Error::InvalidStreamId));
assert_eq!(client.state(), Http3State::Connected);
}
// Test that a PUSH_PROMISE will be ignored after a push stream reset.
#[test]
fn cancel_push_stream_before_push_promise() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Start a push stream with push_id 0.
let push_stream_id =
send_push_data_and_exchange_packets(&mut client, &mut server, 0, false);
server
.conn
.stream_reset_send(push_stream_id, Error::HttpRequestCancelled.code())
.unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 0);
// Assert that we do not have any push event.
assert!(!check_push_events(&mut client));
// Check that the push has been closed, e.g. calling cancel_push should return
// InvalidStreamId.
assert_eq!(client.cancel_push(0), Err(Error::InvalidStreamId));
assert_eq!(client.state(), Http3State::Connected);
}
// Test that push_promise events will be removed after application calls cancel_push.
#[test]
fn app_cancel_push_after_push_promise() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 0);
assert!(client.cancel_push(0).is_ok());
// Assert that we do not have any push event.
assert!(!check_push_events(&mut client));
// Check that the push has been closed, e.g. calling cancel_push should return
// InvalidStreamId.
assert_eq!(client.cancel_push(0), Err(Error::InvalidStreamId));
assert_eq!(client.state(), Http3State::Connected);
}
// Test that push_promise and push data events will be removed after application calls
// cancel_push.
#[test]
fn app_cancel_push_after_push_promise_and_push_stream() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 0);
let push_stream_id =
send_push_data_and_exchange_packets(&mut client, &mut server, 0, false);
assert!(client.cancel_push(0).is_ok());
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
// Assert that we do not have any push event.
assert!(!check_push_events(&mut client));
// Check that the push has been closed, e.g. calling cancel_push should return
// InvalidStreamId.
assert_eq!(client.cancel_push(0), Err(Error::InvalidStreamId));
// Check that the push has been canceled by the client.
assert_stop_sending_event(
&mut server,
push_stream_id,
Error::HttpRequestCancelled.code(),
);
assert_eq!(client.state(), Http3State::Connected);
}
// Test that push_promise events will be ignored after application calls cancel_push.
#[test]
fn app_cancel_push_before_push_promise() {
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 0);
let push_stream_id =
send_push_data_and_exchange_packets(&mut client, &mut server, 0, false);
assert!(client.cancel_push(0).is_ok());
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
send_push_promise_and_exchange_packets(&mut client, &mut server, request_stream_id, 0);
// Assert that we do not have any push event.
assert!(!check_push_events(&mut client));
// Check that the push has been closed, e.g. calling cancel_push should return
// InvalidStreamId.
assert_eq!(client.cancel_push(0), Err(Error::InvalidStreamId));
// Check that the push has been canceled by the client.
assert_stop_sending_event(
&mut server,
push_stream_id,
Error::HttpRequestCancelled.code(),
);
assert_eq!(client.state(), Http3State::Connected);
}
fn setup_server_side_encoder_param(
client: &mut Http3Client,
server: &mut TestServer,
max_blocked_streams: u64,
) {
server
.encoder
.borrow_mut()
.set_max_capacity(max_blocked_streams)
.unwrap();
server
.encoder
.borrow_mut()
.set_max_blocked_streams(100)
.unwrap();
server
.encoder
.borrow_mut()
.send_encoder_updates(&mut server.conn)
.unwrap();
let out = server.conn.process_output(now());
mem::drop(client.process(out.dgram(), now()));
}
fn setup_server_side_encoder(client: &mut Http3Client, server: &mut TestServer) {
setup_server_side_encoder_param(client, server, 100);
}
fn send_push_promise_using_encoder(
client: &mut Http3Client,
server: &mut TestServer,
stream_id: StreamId,
push_id: u64,
) -> Option<Datagram> {
send_push_promise_using_encoder_with_custom_headers(
client,
server,
stream_id,
push_id,
Header::new("my-header", "my-value"),
)
}
fn send_push_promise_using_encoder_with_custom_headers(
client: &mut Http3Client,
server: &mut TestServer,
stream_id: StreamId,
push_id: u64,
additional_header: Header,
) -> Option<Datagram> {
let mut headers = vec![
Header::new(":method", "GET"),
Header::new(":scheme", "https"),
Header::new(":authority", "something.com"),
Header::new(":path", "/"),
Header::new("content-length", "3"),
];
headers.push(additional_header);
let encoded_headers =
server
.encoder
.borrow_mut()
.encode_header_block(&mut server.conn, &headers, stream_id);
let push_promise_frame = HFrame::PushPromise {
push_id,
header_block: encoded_headers.to_vec(),
};
// Send the encoder instructions, but delay them so that the stream is blocked on decoding
// headers.
let encoder_inst_pkt = server.conn.process_output(now()).dgram();
assert!(encoder_inst_pkt.is_some());
let mut d = Encoder::default();
push_promise_frame.encode(&mut d);
server_send_response_and_exchange_packet(client, server, stream_id, &d, false);
encoder_inst_pkt
}
#[test]
fn push_promise_header_decoder_block() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let encoder_inst_pkt =
send_push_promise_using_encoder(&mut client, &mut server, request_stream_id, 0);
// PushPromise is blocked wathing for encoder instructions.
assert!(!check_push_events(&mut client));
// Let client receive the encoder instructions.
let _out = client.process(encoder_inst_pkt, now());
// PushPromise is blocked wathing for encoder instructions.
assert!(check_push_events(&mut client));
}
// If PushPromise is blocked, stream data can still be received.
#[test]
fn push_promise_blocked_but_stream_is_not_blocked() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
// Send response headers
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_HEADER_ONLY_1,
false,
);
let encoder_inst_pkt =
send_push_promise_using_encoder(&mut client, &mut server, request_stream_id, 0);
// PushPromise is blocked wathing for encoder instructions.
assert!(!check_push_events(&mut client));
// Stream data can be still read
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_DATA_FRAME_1_ONLY_1,
false,
);
assert!(check_data_readable(&mut client));
// Let client receive the encoder instructions.
let _out = client.process(encoder_inst_pkt, now());
// PushPromise is blocked wathing for encoder instructions.
assert!(check_push_events(&mut client));
// Stream data can be still read
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_DATA_FRAME_2_ONLY_1,
false,
);
assert!(check_data_readable(&mut client));
}
// The response Headers are not block if they do not refer the dynamic table.
#[test]
fn push_promise_does_not_block_headers() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let encoder_inst_pkt =
send_push_promise_using_encoder(&mut client, &mut server, request_stream_id, 0);
// PushPromise is blocked wathing for encoder instructions.
assert!(!check_push_events(&mut client));
// Send response headers
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_HEADER_ONLY_1,
false,
);
assert!(check_header_ready(&mut client));
// Let client receive the encoder instructions.
let _out = client.process(encoder_inst_pkt, now());
// PushPromise is blocked wathing for encoder instructions.
assert!(check_push_events(&mut client));
}
// The response Headers are blocked if they refer a dynamic table entry.
#[test]
fn push_promise_block_headers() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
// Insert an elemet into a dynamic table.
// insert "content-length: 1234
server
.encoder
.borrow_mut()
.send_and_insert(&mut server.conn, b"content-length", b"1234")
.unwrap();
let encoder_inst_pkt1 = server.conn.process_output(now()).dgram();
let _out = client.process(encoder_inst_pkt1, now());
// Send a PushPromise that is blocked until encoder_inst_pkt2 is process by the client.
let encoder_inst_pkt2 =
send_push_promise_using_encoder(&mut client, &mut server, request_stream_id, 0);
// PushPromise is blocked wathing for encoder instructions.
assert!(!check_push_events(&mut client));
let response_headers = vec![
Header::new(":status", "200"),
Header::new("content-length", "1234"),
];
let encoded_headers = server.encoder.borrow_mut().encode_header_block(
&mut server.conn,
&response_headers,
request_stream_id,
);
let header_hframe = HFrame::Headers {
header_block: encoded_headers.to_vec(),
};
let mut d = Encoder::default();
header_hframe.encode(&mut d);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
false,
);
// The response headers are blocked.
assert!(!check_header_ready(&mut client));
// Let client receive the encoder instructions.
let _out = client.process(encoder_inst_pkt2, now());
// The response headers are blocked.
assert!(check_header_ready_and_push_promise(&mut client));
}
// In this test there are 2 push promises that are blocked and the response header is
// blocked as well. After a packet is received only the first push promises is unblocked.
#[test]
fn two_push_promises_and_header_block() {
let mut client = default_http3_client_param(200);
let mut server = TestServer::new_with_settings(&[
HSetting::new(HSettingType::MaxTableCapacity, 200),
HSetting::new(HSettingType::BlockedStreams, 100),
HSetting::new(HSettingType::MaxHeaderListSize, 10000),
]);
connect_only_transport_with(&mut client, &mut server);
server.create_control_stream();
server.create_qpack_streams();
setup_server_side_encoder_param(&mut client, &mut server, 200);
let request_stream_id = make_request_and_exchange_pkts(&mut client, &mut server, true);
// Send a PushPromise that is blocked until encoder_inst_pkt2 is process by the client.
let encoder_inst_pkt1 = send_push_promise_using_encoder_with_custom_headers(
&mut client,
&mut server,
request_stream_id,
0,
Header::new("myn1", "myv1"),
);
// PushPromise is blocked wathing for encoder instructions.
assert!(!check_push_events(&mut client));
let encoder_inst_pkt2 = send_push_promise_using_encoder_with_custom_headers(
&mut client,
&mut server,
request_stream_id,
1,
Header::new("myn2", "myv2"),
);
// PushPromise is blocked wathing for encoder instructions.
assert!(!check_push_events(&mut client));
let response_headers = vec![
Header::new(":status", "200"),
Header::new("content-length", "1234"),
Header::new("myn3", "myv3"),
];
let encoded_headers = server.encoder.borrow_mut().encode_header_block(
&mut server.conn,
&response_headers,
request_stream_id,
);
let header_hframe = HFrame::Headers {
header_block: encoded_headers.to_vec(),
};
let mut d = Encoder::default();
header_hframe.encode(&mut d);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
false,
);
// The response headers are blocked.
assert!(!check_header_ready(&mut client));
// Let client receive the encoder instructions.
let _out = client.process(encoder_inst_pkt1, now());
assert!(check_push_events(&mut client));
// Let client receive the encoder instructions.
let _out = client.process(encoder_inst_pkt2, now());
assert!(check_header_ready_and_push_promise(&mut client));
}
// The PushPromise blocked on header decoding will be canceled if the stream is closed.
#[test]
fn blocked_push_promises_canceled() {
const STREAM_CANCELED_ID_0: &[u8] = &[0x40];
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
mem::drop(
send_push_promise_using_encoder(&mut client, &mut server, request_stream_id, 0)
.unwrap(),
);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_1,
true,
);
// Read response that will make stream change to closed state.
assert!(check_header_ready(&mut client));
let mut buf = [0_u8; 100];
_ = client
.read_data(now(), request_stream_id, &mut buf)
.unwrap();
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
// Check that encoder got stream_canceled instruction.
let mut inst = [0_u8; 100];
let (amount, fin) = server
.conn
.stream_recv(CLIENT_SIDE_DECODER_STREAM_ID, &mut inst)
.unwrap();
assert!(!fin);
assert_eq!(amount, STREAM_CANCELED_ID_0.len());
assert_eq!(&inst[..amount], STREAM_CANCELED_ID_0);
}
#[test]
fn data_readable_in_decoder_blocked_state() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let headers = vec![
Header::new(":status", "200"),
Header::new("my-header", "my-header"),
Header::new("content-length", "0"),
];
let encoded_headers = server.encoder.borrow_mut().encode_header_block(
&mut server.conn,
&headers,
request_stream_id,
);
let hframe = HFrame::Headers {
header_block: encoded_headers.to_vec(),
};
// Delay encoder instruction so that the stream will be blocked.
let encoder_insts = server.conn.process_output(now());
// Send response headers.
let mut d = Encoder::default();
hframe.encode(&mut d);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
false,
);
// Headers are blocked waiting fro the encoder instructions.
let header_ready_event = |e| matches!(e, Http3ClientEvent::HeaderReady { .. });
assert!(!client.events().any(header_ready_event));
// Now send data frame. This will trigger DataRead event.
let mut d = Encoder::default();
hframe.encode(&mut d);
let d_frame = HFrame::Data { len: 0 };
d_frame.encode(&mut d);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
true,
);
// Now read headers.
mem::drop(client.process(encoder_insts.dgram(), now()));
}
#[test]
fn qpack_stream_reset() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
// Cancel request.
mem::drop(client.cancel_fetch(request_stream_id, Error::HttpRequestCancelled.code()));
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 0);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
mem::drop(server.encoder_receiver.receive(&mut server.conn));
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 1);
}
fn send_headers_using_encoder(
client: &mut Http3Client,
server: &mut TestServer,
request_stream_id: StreamId,
headers: &[Header],
data: &[u8],
) -> Option<Datagram> {
let encoded_headers = server.encoder.borrow_mut().encode_header_block(
&mut server.conn,
headers,
request_stream_id,
);
let hframe = HFrame::Headers {
header_block: encoded_headers.to_vec(),
};
let out = server.conn.process_output(now());
// Send response
let mut d = Encoder::default();
hframe.encode(&mut d);
let d_frame = HFrame::Data {
len: u64::try_from(data.len()).unwrap(),
};
d_frame.encode(&mut d);
d.encode(data);
server_send_response_and_exchange_packet(client, server, request_stream_id, &d, true);
out.dgram()
}
#[test]
fn qpack_stream_reset_recv() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
// Cancel request.
server
.conn
.stream_reset_send(request_stream_id, Error::HttpRequestCancelled.code())
.unwrap();
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 0);
let out = server.conn.process_output(now());
let out = client.process(out.dgram(), now());
mem::drop(server.conn.process(out.dgram(), now()));
mem::drop(server.encoder_receiver.receive(&mut server.conn));
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 1);
}
#[test]
fn qpack_stream_reset_during_header_qpack_blocked() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
mem::drop(
send_headers_using_encoder(
&mut client,
&mut server,
request_stream_id,
&[
Header::new(":status", "200"),
Header::new("my-header", "my-header"),
Header::new("content-length", "3"),
],
&[0x61, 0x62, 0x63],
)
.unwrap(),
);
let header_ready_event = |e| matches!(e, Http3ClientEvent::HeaderReady { .. });
assert!(!client.events().any(header_ready_event));
// Cancel request.
client
.cancel_fetch(request_stream_id, Error::HttpRequestCancelled.code())
.unwrap();
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 0);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
mem::drop(server.encoder_receiver.receive(&mut server.conn).unwrap());
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 1);
}
#[test]
fn qpack_no_stream_cancelled_after_fin() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let encoder_instruct = send_headers_using_encoder(
&mut client,
&mut server,
request_stream_id,
&[
Header::new(":status", "200"),
Header::new("my-header", "my-header"),
Header::new("content-length", "3"),
],
&[],
);
// Exchange encoder instructions
mem::drop(client.process(encoder_instruct, now()));
let header_ready_event = |e| matches!(e, Http3ClientEvent::HeaderReady { .. });
assert!(client.events().any(header_ready_event));
// After this the recv_stream is in ClosePending state
// Cancel request.
client
.cancel_fetch(request_stream_id, Error::HttpRequestCancelled.code())
.unwrap();
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 0);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
mem::drop(server.encoder_receiver.receive(&mut server.conn).unwrap());
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 0);
}
#[test]
fn qpack_stream_reset_push_promise_header_decoder_block() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let headers = vec![
Header::new(":status", "200"),
Header::new("content-length", "3"),
];
let encoded_headers = server.encoder.borrow_mut().encode_header_block(
&mut server.conn,
&headers,
request_stream_id,
);
let hframe = HFrame::Headers {
header_block: encoded_headers.to_vec(),
};
// Send the encoder instructions.
let out = server.conn.process_output(now());
mem::drop(client.process(out.dgram(), now()));
// Send PushPromise that will be blocked waiting for decoder instructions.
mem::drop(
send_push_promise_using_encoder(&mut client, &mut server, request_stream_id, 0)
.unwrap(),
);
// Send response
let mut d = Encoder::default();
hframe.encode(&mut d);
let d_frame = HFrame::Data { len: 0 };
d_frame.encode(&mut d);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
true,
);
let header_ready_event = |e| matches!(e, Http3ClientEvent::HeaderReady { .. });
assert!(client.events().any(header_ready_event));
// Cancel request.
client
.cancel_fetch(request_stream_id, Error::HttpRequestCancelled.code())
.unwrap();
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
mem::drop(server.encoder_receiver.receive(&mut server.conn).unwrap());
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 1);
}
#[test]
fn qpack_stream_reset_dynamic_table_zero() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Cancel request.
client
.cancel_fetch(request_stream_id, Error::HttpRequestCancelled.code())
.unwrap();
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 0);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
mem::drop(server.encoder_receiver.receive(&mut server.conn).unwrap());
assert_eq!(server.encoder.borrow_mut().stats().stream_cancelled_recv, 0);
}
#[test]
fn multiple_streams_in_decoder_blocked_state() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let headers = vec![
Header::new(":status", "200"),
Header::new("my-header", "my-header"),
Header::new("content-length", "0"),
];
let encoded_headers = server.encoder.borrow_mut().encode_header_block(
&mut server.conn,
&headers,
request_stream_id,
);
let hframe = HFrame::Headers {
header_block: encoded_headers.to_vec(),
};
// Delay encoder instruction so that the stream will be blocked.
let encoder_insts = server.conn.process_output(now());
// Send response headers.
let mut d = Encoder::default();
hframe.encode(&mut d);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
true,
);
// Headers are blocked waiting for the encoder instructions.
let header_ready_event = |e| matches!(e, Http3ClientEvent::HeaderReady { .. });
assert!(!client.events().any(header_ready_event));
// Make another request.
let request2 = make_request_and_exchange_pkts(&mut client, &mut server, true);
// Send response headers.
server_send_response_and_exchange_packet(&mut client, &mut server, request2, &d, true);
// Headers on the second request are blocked as well are blocked
// waiting for the encoder instructions.
assert!(!client.events().any(header_ready_event));
// Now make the encoder instructions available.
mem::drop(client.process(encoder_insts.dgram(), now()));
// Header blocks for both streams should be ready.
let mut count_responses = 0;
while let Some(e) = client.next_event() {
if let Http3ClientEvent::HeaderReady { stream_id, .. } = e {
assert!((stream_id == request_stream_id) || (stream_id == request2));
count_responses += 1;
}
}
assert_eq!(count_responses, 2);
}
#[test]
fn reserved_frames() {
for f in H3_RESERVED_FRAME_TYPES {
let mut enc = Encoder::default();
enc.encode_varint(*f);
test_wrong_frame_on_control_stream(enc.as_ref());
test_wrong_frame_on_push_stream(enc.as_ref());
test_wrong_frame_on_request_stream(enc.as_ref());
}
}
#[test]
fn send_reserved_settings() {
for s in H3_RESERVED_SETTINGS {
let (mut client, mut server) = connect_only_transport();
let control_stream = server.conn.stream_create(StreamType::UniDi).unwrap();
// Send the control stream type(0x0).
_ = server
.conn
.stream_send(control_stream, CONTROL_STREAM_TYPE)
.unwrap();
// Create a settings frame of length 2.
let mut enc = Encoder::default();
enc.encode_varint(H3_FRAME_TYPE_SETTINGS);
enc.encode_varint(2_u64);
// The settings frame contains a reserved settings type and some value (0x1).
enc.encode_varint(*s);
enc.encode_varint(1_u64);
let sent = server.conn.stream_send(control_stream, enc.as_ref());
assert_eq!(sent, Ok(4));
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpSettings);
}
}
#[test]
fn response_w_1xx() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let mut d = Encoder::default();
let headers1xx: &[Header] = &[Header::new(":status", "103")];
server.encode_headers(request_stream_id, headers1xx, &mut d);
let headers200: &[Header] = &[
Header::new(":status", "200"),
Header::new("my-header", "my-header"),
Header::new("content-length", "3"),
];
server.encode_headers(request_stream_id, headers200, &mut d);
// Send 1xx and 200 headers response.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
false,
);
// Sending response data.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_DATA_FRAME_ONLY_2,
true,
);
let mut events = client.events().filter_map(|e| {
if let Http3ClientEvent::HeaderReady {
stream_id,
interim,
headers,
..
} = e
{
Some((stream_id, interim, headers))
} else {
None
}
});
let (stream_id_1xx_rec, interim1xx_rec, headers1xx_rec) = events.next().unwrap();
assert_eq!(
(stream_id_1xx_rec, interim1xx_rec, headers1xx_rec.as_ref()),
(request_stream_id, true, headers1xx)
);
let (stream_id_200_rec, interim200_rec, headers200_rec) = events.next().unwrap();
assert_eq!(
(stream_id_200_rec, interim200_rec, headers200_rec.as_ref()),
(request_stream_id, false, headers200)
);
assert!(events.next().is_none());
}
#[test]
fn response_wo_status() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let mut d = Encoder::default();
let headers = vec![
Header::new("my-header", "my-header"),
Header::new("content-length", "3"),
];
server.encode_headers(request_stream_id, &headers, &mut d);
// Send response
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
false,
);
// Stream has been reset because of the malformed headers.
let e = client.events().next().unwrap();
assert_eq!(
e,
Http3ClientEvent::Reset {
stream_id: request_stream_id,
error: Error::InvalidHeader.code(),
local: true,
}
);
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
// Check that server has received a reset.
let stop_sending_event = |e| {
matches!(e, ConnectionEvent::SendStreamStopSending {
stream_id,
app_error
} if stream_id == request_stream_id && app_error == Error::InvalidHeader.code())
};
assert!(server.conn.events().any(stop_sending_event));
// Stream should now be closed and gone
let mut buf = [0_u8; 100];
assert_eq!(
client.read_data(now(), StreamId::new(0), &mut buf),
Err(Error::InvalidStreamId)
);
}
// Client: receive a push stream
#[test]
fn push_single_with_1xx() {
const FIRST_PUSH_ID: u64 = 0;
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send a push promise.
send_push_promise(&mut server.conn, request_stream_id, FIRST_PUSH_ID);
// Create a push stream
let push_stream_id = server.conn.stream_create(StreamType::UniDi).unwrap();
let mut d = Encoder::default();
let headers1xx: &[Header] = &[Header::new(":status", "100")];
server.encode_headers(push_stream_id, headers1xx, &mut d);
let headers200: &[Header] = &[
Header::new(":status", "200"),
Header::new("my-header", "my-header"),
Header::new("content-length", "3"),
];
server.encode_headers(push_stream_id, headers200, &mut d);
// create a push stream.
send_data_on_push(
&mut server.conn,
push_stream_id,
u8::try_from(FIRST_PUSH_ID).unwrap(),
&d,
true,
);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
true,
);
let mut events = client.events().filter_map(|e| {
if let Http3ClientEvent::PushHeaderReady {
push_id,
interim,
headers,
..
} = e
{
Some((push_id, interim, headers))
} else {
None
}
});
let (push_id_1xx_rec, interim1xx_rec, headers1xx_rec) = events.next().unwrap();
assert_eq!(
(push_id_1xx_rec, interim1xx_rec, headers1xx_rec.as_ref()),
(FIRST_PUSH_ID, true, headers1xx)
);
let (push_id_200_rec, interim200_rec, headers200_rec) = events.next().unwrap();
assert_eq!(
(push_id_200_rec, interim200_rec, headers200_rec.as_ref()),
(FIRST_PUSH_ID, false, headers200)
);
assert!(events.next().is_none());
}
// Client: receive a push stream
#[test]
fn push_single_wo_status() {
const FIRST_PUSH_ID: u64 = 0;
// Connect and send a request
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
// Send a push promise.
send_push_promise(&mut server.conn, request_stream_id, FIRST_PUSH_ID);
// Create a push stream
let push_stream_id = server.conn.stream_create(StreamType::UniDi).unwrap();
let mut d = Encoder::default();
let headers = vec![
Header::new("my-header", "my-header"),
Header::new("content-length", "3"),
];
server.encode_headers(request_stream_id, &headers, &mut d);
send_data_on_push(
&mut server.conn,
push_stream_id,
u8::try_from(FIRST_PUSH_ID).unwrap(),
&d,
false,
);
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
HTTP_RESPONSE_2,
true,
);
// Stream has been reset because of thei malformed headers.
let push_reset_event = |e| {
matches!(e, Http3ClientEvent::PushReset {
push_id,
error,
} if push_id == FIRST_PUSH_ID && error == Error::InvalidHeader.code())
};
assert!(client.events().any(push_reset_event));
let out = client.process_output(now());
mem::drop(server.conn.process(out.dgram(), now()));
// Check that server has received a reset.
let stop_sending_event = |e| {
matches!(e, ConnectionEvent::SendStreamStopSending {
stream_id,
app_error
} if stream_id == push_stream_id && app_error == Error::InvalidHeader.code())
};
assert!(server.conn.events().any(stop_sending_event));
}
fn handshake_client_error(client: &mut Http3Client, server: &mut TestServer, error: &Error) {
let out = handshake_only(client, server);
client.process(out.dgram(), now());
assert_closed(client, error);
}
/// Client fails to create a control stream, since server does not allow it.
#[test]
fn client_control_stream_create_failed() {
let mut client = default_http3_client();
let mut server = TestServer::new_with_conn(new_server(
DEFAULT_ALPN_H3,
ConnectionParameters::default().max_streams(StreamType::UniDi, 0),
));
handshake_client_error(&mut client, &mut server, &Error::StreamLimitError);
}
/// 2 streams isn't enough for control and QPACK streams.
#[test]
fn client_qpack_stream_create_failed() {
let mut client = default_http3_client();
let mut server = TestServer::new_with_conn(new_server(
DEFAULT_ALPN_H3,
ConnectionParameters::default().max_streams(StreamType::UniDi, 2),
));
handshake_client_error(&mut client, &mut server, &Error::StreamLimitError);
}
fn do_malformed_response_test(headers: &[Header]) {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let mut d = Encoder::default();
server.encode_headers(request_stream_id, headers, &mut d);
// Send response
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
false,
);
// Stream has been reset because of the malformed headers.
let e = client.events().next().unwrap();
assert_eq!(
e,
Http3ClientEvent::Reset {
stream_id: request_stream_id,
error: Error::InvalidHeader.code(),
local: true,
}
);
}
#[test]
fn malformed_response_pseudo_header_after_regular_header() {
do_malformed_response_test(&[
Header::new("content-type", "text/plain"),
Header::new(":status", "100"),
]);
}
#[test]
fn malformed_response_undefined_pseudo_header() {
do_malformed_response_test(&[Header::new(":status", "200"), Header::new(":cheese", "200")]);
}
#[test]
fn malformed_response_duplicate_pseudo_header() {
do_malformed_response_test(&[
Header::new(":status", "200"),
Header::new(":status", "100"),
Header::new("content-type", "text/plain"),
]);
}
#[test]
fn malformed_response_uppercase_header() {
do_malformed_response_test(&[
Header::new(":status", "200"),
Header::new("content-Type", "text/plain"),
]);
}
#[test]
fn malformed_response_excluded_header() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let mut d = Encoder::default();
server.encode_headers(
request_stream_id,
&[
Header::new(":status", "200"),
Header::new("content-type", "text/plain"),
Header::new("connection", "close"),
],
&mut d,
);
// Send response
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
false,
);
// Stream has been reset because of the malformed headers.
let e = client.events().next().unwrap();
assert_eq!(
e,
Http3ClientEvent::HeaderReady {
stream_id: request_stream_id,
headers: vec![
Header::new(":status", "200"),
Header::new("content-type", "text/plain")
],
interim: false,
fin: false,
}
);
}
#[test]
fn malformed_response_excluded_byte_in_header() {
do_malformed_response_test(&[
Header::new(":status", "200"),
Header::new("content:type", "text/plain"),
]);
}
#[test]
fn malformed_response_request_header_in_response() {
do_malformed_response_test(&[
Header::new(":status", "200"),
Header::new(":method", "GET"),
Header::new("content-type", "text/plain"),
]);
}
fn maybe_authenticate(conn: &mut Http3Client) {
let authentication_needed = |e| matches!(e, Http3ClientEvent::AuthenticationNeeded);
if conn.events().any(authentication_needed) {
conn.authenticated(AuthenticationStatus::Ok, now());
}
}
const MAX_TABLE_SIZE: u64 = 65536;
const MAX_BLOCKED_STREAMS: u16 = 5;
fn get_resumption_token(server: &mut Http3Server) -> ResumptionToken {
let mut client = default_http3_client_param(MAX_TABLE_SIZE);
let mut datagram = None;
let is_done = |c: &Http3Client| matches!(c.state(), Http3State::Connected);
while !is_done(&mut client) {
maybe_authenticate(&mut client);
datagram = client.process(datagram, now()).dgram();
datagram = server.process(datagram, now()).dgram();
}
// exchange qpack settings, server will send a token as well.
datagram = client.process(datagram, now()).dgram();
datagram = server.process(datagram, now()).dgram();
mem::drop(client.process(datagram, now()).dgram());
client
.events()
.find_map(|e| {
if let Http3ClientEvent::ResumptionToken(token) = e {
Some(token)
} else {
None
}
})
.unwrap()
}
// Test that decoder stream type is always sent before any other instruction also
// in case when 0RTT is used.
// A client will send a request that uses the dynamic table. This will trigger a header-ack
// from a server. We will use stats to check that a header-ack has been received.
#[test]
fn zerortt_request_use_dynamic_table() {
let mut server = Http3Server::new(
now(),
DEFAULT_KEYS,
DEFAULT_ALPN_H3,
anti_replay(),
Rc::new(RefCell::new(CountingConnectionIdGenerator::default())),
Http3Parameters::default()
.max_table_size_encoder(MAX_TABLE_SIZE)
.max_table_size_decoder(MAX_TABLE_SIZE)
.max_blocked_streams(MAX_BLOCKED_STREAMS),
None,
)
.unwrap();
let token = get_resumption_token(&mut server);
// Make a new connection.
let mut client = default_http3_client_param(MAX_TABLE_SIZE);
assert_eq!(client.state(), Http3State::Initializing);
client
.enable_resumption(now(), &token)
.expect("Set resumption token.");
assert_eq!(client.state(), Http3State::ZeroRtt);
let zerortt_event = |e| matches!(e, Http3ClientEvent::StateChange(Http3State::ZeroRtt));
assert!(client.events().any(zerortt_event));
// Make a request that uses the dynamic table.
_ = make_request(&mut client, true, &[Header::new("myheaders", "myvalue")]);
// Assert that the request has used dynamic table. That will trigger a header_ack.
assert_eq!(client.qpack_encoder_stats().dynamic_table_references, 1);
// Exchange packets until header-ack is received.
// These many packet exchange is needed, to get a header-ack.
// TODO this may be optimize at Http3Server.
let out = client.process_output(now());
let out = server.process(out.dgram(), now());
let out = client.process(out.dgram(), now());
let out = server.process(out.dgram(), now());
let out = client.process(out.dgram(), now());
let out = server.process(out.dgram(), now());
let out = client.process(out.dgram(), now());
let out = server.process(out.dgram(), now());
mem::drop(client.process(out.dgram(), now()));
// The header ack for the first request has been received.
assert_eq!(client.qpack_encoder_stats().header_acks_recv, 1);
}
fn manipulate_conrol_stream(client: &mut Http3Client, stream_id: StreamId) {
assert_eq!(
client
.cancel_fetch(stream_id, Error::HttpNoError.code())
.unwrap_err(),
Error::InvalidStreamId
);
assert_eq!(
client.stream_close_send(stream_id).unwrap_err(),
Error::InvalidStreamId
);
let mut buf = [0; 2];
assert_eq!(
client.send_data(stream_id, &buf).unwrap_err(),
Error::InvalidStreamId
);
assert_eq!(
client.read_data(now(), stream_id, &mut buf).unwrap_err(),
Error::InvalidStreamId
);
}
#[test]
fn manipulate_conrol_streams() {
let (mut client, server, request_stream_id) = connect_and_send_request(false);
manipulate_conrol_stream(&mut client, CLIENT_SIDE_CONTROL_STREAM_ID);
manipulate_conrol_stream(&mut client, CLIENT_SIDE_ENCODER_STREAM_ID);
manipulate_conrol_stream(&mut client, CLIENT_SIDE_DECODER_STREAM_ID);
manipulate_conrol_stream(&mut client, server.control_stream_id.unwrap());
manipulate_conrol_stream(&mut client, server.encoder_stream_id.unwrap());
manipulate_conrol_stream(&mut client, server.decoder_stream_id.unwrap());
client
.cancel_fetch(request_stream_id, Error::HttpNoError.code())
.unwrap();
}
// Client: receive a push stream
#[test]
fn incomple_push_stream() {
let (mut client, mut server) = connect();
// Create a push stream
let push_stream_id = server.conn.stream_create(StreamType::UniDi).unwrap();
_ = server
.conn
.stream_send(push_stream_id, PUSH_STREAM_TYPE)
.unwrap();
_ = server.conn.stream_send(push_stream_id, &[0]).unwrap();
server.conn.stream_close_send(push_stream_id).unwrap();
let out = server.conn.process_output(now());
client.process(out.dgram(), now());
assert_closed(&client, &Error::HttpGeneralProtocol);
}
#[test]
fn priority_update_during_full_buffer() {
// set a lower MAX_DATA on the server side to restrict the data the client can send
let (mut client, mut server) = connect_with_connection_parameters(
ConnectionParameters::default().max_data(MIN_INITIAL_PACKET_SIZE.try_into().unwrap()),
);
let request_stream_id = make_request_and_exchange_pkts(&mut client, &mut server, false);
let data_writable = |e| matches!(e, Http3ClientEvent::DataWritable { .. });
assert!(client.events().any(data_writable));
// Send a lot of data to reach the flow control limit
client.send_data(request_stream_id, &[0; 2000]).unwrap();
// now queue a priority_update packet for that stream
assert!(client
.priority_update(request_stream_id, Priority::new(6, false))
.unwrap());
let md_before = server.conn.stats().frame_tx.max_data;
// sending the http request and most most of the request data
let out = client.process_output(now());
let out = server.conn.process(out.dgram(), now());
// the server responses with an ack, but the max_data didn't change
assert_eq!(md_before, server.conn.stats().frame_tx.max_data);
let out = client.process(out.dgram(), now());
let out = server.conn.process(out.dgram(), now());
// the server increased the max_data during the second read if that isn't the case
// in the future and therefore this asserts fails, the request data on stream 0 could be
// read to cause a max_update frame
assert_eq!(md_before + 1, server.conn.stats().frame_tx.max_data);
// make sure that the server didn't receive a priority_update on client control stream
// (stream_id 2) yet
let mut buf = [0; 32];
assert_eq!(
server.conn.stream_recv(StreamId::new(2), &mut buf),
Ok((0, false))
);
// the client now sends the priority update
let out = client.process(out.dgram(), now());
server.conn.process_input(out.dgram().unwrap(), now());
// check that the priority_update arrived at the client control stream
let num_read = server.conn.stream_recv(StreamId::new(2), &mut buf).unwrap();
assert_eq!(b"\x80\x0f\x07\x00\x04\x00\x75\x3d\x36", &buf[0..num_read.0]);
}
#[test]
fn error_request_stream() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let headers = vec![
Header::new(":status", "200"),
Header::new(":method", "GET"), // <- invalid
Header::new("my-header", "my-header"),
Header::new("content-length", "3"),
];
let encoded_headers = server.encoder.borrow_mut().encode_header_block(
&mut server.conn,
&headers,
request_stream_id,
);
let hframe = HFrame::Headers {
header_block: encoded_headers.to_vec(),
};
// Send the encoder instructions, but delay them so that the stream is blocked on decoding
// headers.
let encoder_inst_pkt = server.conn.process_output(now());
// Send response
let mut d = Encoder::default();
hframe.encode(&mut d);
let d_frame = HFrame::Data { len: 3 };
d_frame.encode(&mut d);
d.encode(b"abc");
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
true,
);
// Let client receive the encoder instructions.
client.process_input(encoder_inst_pkt.dgram().unwrap(), now());
let reset_event = |e| matches!(e, Http3ClientEvent::Reset { stream_id, .. } if stream_id == request_stream_id);
assert!(client.events().any(reset_event));
}
#[test]
fn response_w_101() {
let (mut client, mut server, request_stream_id) = connect_and_send_request(true);
setup_server_side_encoder(&mut client, &mut server);
let mut d = Encoder::default();
let headers1xx = &[Header::new(":status", "101")];
server.encode_headers(request_stream_id, headers1xx, &mut d);
// Send 101 response.
server_send_response_and_exchange_packet(
&mut client,
&mut server,
request_stream_id,
&d,
false,
);
// Stream has been reset because of the 101 response.
let e = client.events().next().unwrap();
assert_eq!(
e,
Http3ClientEvent::Reset {
stream_id: request_stream_id,
error: Error::InvalidHeader.code(),
local: true,
}
);
}
}