Revision control
Copy as Markdown
Other Tools
//! Lower-level client connection API.
//!
//! The types in this module are to provide a lower-level API based around a
//! single connection. Connecting to a host, pooling connections, and the like
//! are not handled at this level. This module provides the building blocks to
//! customize those things externally.
//!
//! If don't have need to manage connections yourself, consider using the
//! higher-level [Client](super) API.
//!
//! ## Example
//! A simple example that uses the `SendRequest` struct to talk HTTP over a Tokio TCP stream
//! ```no_run
//! # #[cfg(all(feature = "client", feature = "http1", feature = "runtime"))]
//! # mod rt {
//! use tower::ServiceExt;
//! use http::{Request, StatusCode};
//! use hyper::{client::conn, Body};
//! use tokio::net::TcpStream;
//!
//! #[tokio::main]
//! async fn main() -> Result<(), Box<dyn std::error::Error>> {
//! let target_stream = TcpStream::connect("example.com:80").await?;
//!
//! let (mut request_sender, connection) = conn::handshake(target_stream).await?;
//!
//! // spawn a task to poll the connection and drive the HTTP state
//! tokio::spawn(async move {
//! if let Err(e) = connection.await {
//! eprintln!("Error in connection: {}", e);
//! }
//! });
//!
//! let request = Request::builder()
//! // We need to manually add the host header because SendRequest does not
//! .header("Host", "example.com")
//! .method("GET")
//! .body(Body::from(""))?;
//! let response = request_sender.send_request(request).await?;
//! assert!(response.status() == StatusCode::OK);
//!
//! // To send via the same connection again, it may not work as it may not be ready,
//! // so we have to wait until the request_sender becomes ready.
//! request_sender.ready().await?;
//! let request = Request::builder()
//! .header("Host", "example.com")
//! .method("GET")
//! .body(Body::from(""))?;
//! let response = request_sender.send_request(request).await?;
//! assert!(response.status() == StatusCode::OK);
//! Ok(())
//! }
//!
//! # }
//! ```
use std::error::Error as StdError;
use std::fmt;
#[cfg(not(all(feature = "http1", feature = "http2")))]
use std::marker::PhantomData;
use std::sync::Arc;
#[cfg(all(feature = "runtime", feature = "http2"))]
use std::time::Duration;
use bytes::Bytes;
use futures_util::future::{self, Either, FutureExt as _};
use httparse::ParserConfig;
use pin_project_lite::pin_project;
use tokio::io::{AsyncRead, AsyncWrite};
use tower_service::Service;
use tracing::{debug, trace};
use super::dispatch;
use crate::body::HttpBody;
#[cfg(not(all(feature = "http1", feature = "http2")))]
use crate::common::Never;
use crate::common::{
exec::{BoxSendFuture, Exec},
task, Future, Pin, Poll,
};
use crate::proto;
use crate::rt::Executor;
#[cfg(feature = "http1")]
use crate::upgrade::Upgraded;
use crate::{Body, Request, Response};
#[cfg(feature = "http1")]
type Http1Dispatcher<T, B> =
proto::dispatch::Dispatcher<proto::dispatch::Client<B>, B, T, proto::h1::ClientTransaction>;
#[cfg(not(feature = "http1"))]
type Http1Dispatcher<T, B> = (Never, PhantomData<(T, Pin<Box<B>>)>);
#[cfg(feature = "http2")]
type Http2ClientTask<B> = proto::h2::ClientTask<B>;
#[cfg(not(feature = "http2"))]
type Http2ClientTask<B> = (Never, PhantomData<Pin<Box<B>>>);
pin_project! {
#[project = ProtoClientProj]
enum ProtoClient<T, B>
where
B: HttpBody,
{
H1 {
#[pin]
h1: Http1Dispatcher<T, B>,
},
H2 {
#[pin]
h2: Http2ClientTask<B>,
},
}
}
/// Returns a handshake future over some IO.
///
/// This is a shortcut for `Builder::new().handshake(io)`.
/// See [`client::conn`](crate::client::conn) for more.
pub async fn handshake<T>(
io: T,
) -> crate::Result<(SendRequest<crate::Body>, Connection<T, crate::Body>)>
where
T: AsyncRead + AsyncWrite + Unpin + Send + 'static,
{
Builder::new().handshake(io).await
}
/// The sender side of an established connection.
pub struct SendRequest<B> {
dispatch: dispatch::Sender<Request<B>, Response<Body>>,
}
/// A future that processes all HTTP state for the IO object.
///
/// In most cases, this should just be spawned into an executor, so that it
/// can process incoming and outgoing messages, notice hangups, and the like.
#[must_use = "futures do nothing unless polled"]
pub struct Connection<T, B>
where
T: AsyncRead + AsyncWrite + Send + 'static,
B: HttpBody + 'static,
{
inner: Option<ProtoClient<T, B>>,
}
/// A builder to configure an HTTP connection.
///
/// After setting options, the builder is used to create a handshake future.
#[derive(Clone, Debug)]
pub struct Builder {
pub(super) exec: Exec,
h09_responses: bool,
h1_parser_config: ParserConfig,
h1_writev: Option<bool>,
h1_title_case_headers: bool,
h1_preserve_header_case: bool,
#[cfg(feature = "ffi")]
h1_preserve_header_order: bool,
h1_read_buf_exact_size: Option<usize>,
h1_max_buf_size: Option<usize>,
#[cfg(feature = "ffi")]
h1_headers_raw: bool,
#[cfg(feature = "http2")]
h2_builder: proto::h2::client::Config,
version: Proto,
}
#[derive(Clone, Debug)]
enum Proto {
#[cfg(feature = "http1")]
Http1,
#[cfg(feature = "http2")]
Http2,
}
/// A future returned by `SendRequest::send_request`.
///
/// Yields a `Response` if successful.
#[must_use = "futures do nothing unless polled"]
pub struct ResponseFuture {
inner: ResponseFutureState,
}
enum ResponseFutureState {
Waiting(dispatch::Promise<Response<Body>>),
// Option is to be able to `take()` it in `poll`
Error(Option<crate::Error>),
}
/// Deconstructed parts of a `Connection`.
///
/// This allows taking apart a `Connection` at a later time, in order to
/// reclaim the IO object, and additional related pieces.
#[derive(Debug)]
pub struct Parts<T> {
/// The original IO object used in the handshake.
pub io: T,
/// A buffer of bytes that have been read but not processed as HTTP.
///
/// For instance, if the `Connection` is used for an HTTP upgrade request,
/// it is possible the server sent back the first bytes of the new protocol
/// along with the response upgrade.
///
/// You will want to check for any existing bytes if you plan to continue
/// communicating on the IO object.
pub read_buf: Bytes,
_inner: (),
}
// ========== internal client api
// A `SendRequest` that can be cloned to send HTTP2 requests.
// private for now, probably not a great idea of a type...
#[must_use = "futures do nothing unless polled"]
#[cfg(feature = "http2")]
pub(super) struct Http2SendRequest<B> {
dispatch: dispatch::UnboundedSender<Request<B>, Response<Body>>,
}
// ===== impl SendRequest
impl<B> SendRequest<B> {
/// Polls to determine whether this sender can be used yet for a request.
///
/// If the associated connection is closed, this returns an Error.
pub fn poll_ready(&mut self, cx: &mut task::Context<'_>) -> Poll<crate::Result<()>> {
self.dispatch.poll_ready(cx)
}
pub(super) async fn when_ready(self) -> crate::Result<Self> {
let mut me = Some(self);
future::poll_fn(move |cx| {
ready!(me.as_mut().unwrap().poll_ready(cx))?;
Poll::Ready(Ok(me.take().unwrap()))
})
.await
}
pub(super) fn is_ready(&self) -> bool {
self.dispatch.is_ready()
}
pub(super) fn is_closed(&self) -> bool {
self.dispatch.is_closed()
}
#[cfg(feature = "http2")]
pub(super) fn into_http2(self) -> Http2SendRequest<B> {
Http2SendRequest {
dispatch: self.dispatch.unbound(),
}
}
}
impl<B> SendRequest<B>
where
B: HttpBody + 'static,
{
/// Sends a `Request` on the associated connection.
///
/// Returns a future that if successful, yields the `Response`.
///
/// # Note
///
/// There are some key differences in what automatic things the `Client`
/// does for you that will not be done here:
///
/// - `Client` requires absolute-form `Uri`s, since the scheme and
/// authority are needed to connect. They aren't required here.
/// - Since the `Client` requires absolute-form `Uri`s, it can add
/// the `Host` header based on it. You must add a `Host` header yourself
/// before calling this method.
/// - Since absolute-form `Uri`s are not required, if received, they will
/// be serialized as-is.
///
/// # Example
///
/// ```
/// # use http::header::HOST;
/// # use hyper::client::conn::SendRequest;
/// # use hyper::Body;
/// use hyper::Request;
///
/// # async fn doc(mut tx: SendRequest<Body>) -> hyper::Result<()> {
/// // build a Request
/// let req = Request::builder()
/// .uri("/foo/bar")
/// .header(HOST, "hyper.rs")
/// .body(Body::empty())
/// .unwrap();
///
/// // send it and await a Response
/// let res = tx.send_request(req).await?;
/// // assert the Response
/// assert!(res.status().is_success());
/// # Ok(())
/// # }
/// # fn main() {}
/// ```
pub fn send_request(&mut self, req: Request<B>) -> ResponseFuture {
let inner = match self.dispatch.send(req) {
Ok(rx) => ResponseFutureState::Waiting(rx),
Err(_req) => {
debug!("connection was not ready");
let err = crate::Error::new_canceled().with("connection was not ready");
ResponseFutureState::Error(Some(err))
}
};
ResponseFuture { inner }
}
pub(super) fn send_request_retryable(
&mut self,
req: Request<B>,
) -> impl Future<Output = Result<Response<Body>, (crate::Error, Option<Request<B>>)>> + Unpin
where
B: Send,
{
match self.dispatch.try_send(req) {
Ok(rx) => {
Either::Left(rx.then(move |res| {
match res {
Ok(Ok(res)) => future::ok(res),
Ok(Err(err)) => future::err(err),
// this is definite bug if it happens, but it shouldn't happen!
Err(_) => panic!("dispatch dropped without returning error"),
}
}))
}
Err(req) => {
debug!("connection was not ready");
let err = crate::Error::new_canceled().with("connection was not ready");
Either::Right(future::err((err, Some(req))))
}
}
}
}
impl<B> Service<Request<B>> for SendRequest<B>
where
B: HttpBody + 'static,
{
type Response = Response<Body>;
type Error = crate::Error;
type Future = ResponseFuture;
fn poll_ready(&mut self, cx: &mut task::Context<'_>) -> Poll<Result<(), Self::Error>> {
self.poll_ready(cx)
}
fn call(&mut self, req: Request<B>) -> Self::Future {
self.send_request(req)
}
}
impl<B> fmt::Debug for SendRequest<B> {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.debug_struct("SendRequest").finish()
}
}
// ===== impl Http2SendRequest
#[cfg(feature = "http2")]
impl<B> Http2SendRequest<B> {
pub(super) fn is_ready(&self) -> bool {
self.dispatch.is_ready()
}
pub(super) fn is_closed(&self) -> bool {
self.dispatch.is_closed()
}
}
#[cfg(feature = "http2")]
impl<B> Http2SendRequest<B>
where
B: HttpBody + 'static,
{
pub(super) fn send_request_retryable(
&mut self,
req: Request<B>,
) -> impl Future<Output = Result<Response<Body>, (crate::Error, Option<Request<B>>)>>
where
B: Send,
{
match self.dispatch.try_send(req) {
Ok(rx) => {
Either::Left(rx.then(move |res| {
match res {
Ok(Ok(res)) => future::ok(res),
Ok(Err(err)) => future::err(err),
// this is definite bug if it happens, but it shouldn't happen!
Err(_) => panic!("dispatch dropped without returning error"),
}
}))
}
Err(req) => {
debug!("connection was not ready");
let err = crate::Error::new_canceled().with("connection was not ready");
Either::Right(future::err((err, Some(req))))
}
}
}
}
#[cfg(feature = "http2")]
impl<B> fmt::Debug for Http2SendRequest<B> {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.debug_struct("Http2SendRequest").finish()
}
}
#[cfg(feature = "http2")]
impl<B> Clone for Http2SendRequest<B> {
fn clone(&self) -> Self {
Http2SendRequest {
dispatch: self.dispatch.clone(),
}
}
}
// ===== impl Connection
impl<T, B> Connection<T, B>
where
T: AsyncRead + AsyncWrite + Unpin + Send + 'static,
B: HttpBody + Unpin + Send + 'static,
B::Data: Send,
B::Error: Into<Box<dyn StdError + Send + Sync>>,
{
/// Return the inner IO object, and additional information.
///
/// Only works for HTTP/1 connections. HTTP/2 connections will panic.
pub fn into_parts(self) -> Parts<T> {
match self.inner.expect("already upgraded") {
#[cfg(feature = "http1")]
ProtoClient::H1 { h1 } => {
let (io, read_buf, _) = h1.into_inner();
Parts {
io,
read_buf,
_inner: (),
}
}
ProtoClient::H2 { .. } => {
panic!("http2 cannot into_inner");
}
#[cfg(not(feature = "http1"))]
ProtoClient::H1 { h1 } => match h1.0 {},
}
}
/// Poll the connection for completion, but without calling `shutdown`
/// on the underlying IO.
///
/// This is useful to allow running a connection while doing an HTTP
/// upgrade. Once the upgrade is completed, the connection would be "done",
/// but it is not desired to actually shutdown the IO object. Instead you
/// would take it back using `into_parts`.
///
/// to work with this function; or use the `without_shutdown` wrapper.
pub fn poll_without_shutdown(&mut self, cx: &mut task::Context<'_>) -> Poll<crate::Result<()>> {
match *self.inner.as_mut().expect("already upgraded") {
#[cfg(feature = "http1")]
ProtoClient::H1 { ref mut h1 } => h1.poll_without_shutdown(cx),
#[cfg(feature = "http2")]
ProtoClient::H2 { ref mut h2, .. } => Pin::new(h2).poll(cx).map_ok(|_| ()),
#[cfg(not(feature = "http1"))]
ProtoClient::H1 { ref mut h1 } => match h1.0 {},
#[cfg(not(feature = "http2"))]
ProtoClient::H2 { ref mut h2, .. } => match h2.0 {},
}
}
/// Prevent shutdown of the underlying IO object at the end of service the request,
/// instead run `into_parts`. This is a convenience wrapper over `poll_without_shutdown`.
pub fn without_shutdown(self) -> impl Future<Output = crate::Result<Parts<T>>> {
let mut conn = Some(self);
future::poll_fn(move |cx| -> Poll<crate::Result<Parts<T>>> {
ready!(conn.as_mut().unwrap().poll_without_shutdown(cx))?;
Poll::Ready(Ok(conn.take().unwrap().into_parts()))
})
}
/// Returns whether the [extended CONNECT protocol][1] is enabled or not.
///
/// This setting is configured by the server peer by sending the
/// [`SETTINGS_ENABLE_CONNECT_PROTOCOL` parameter][2] in a `SETTINGS` frame.
/// This method returns the currently acknowledged value received from the
/// remote.
///
#[cfg(feature = "http2")]
pub fn http2_is_extended_connect_protocol_enabled(&self) -> bool {
match self.inner.as_ref().unwrap() {
ProtoClient::H1 { .. } => false,
ProtoClient::H2 { h2 } => h2.is_extended_connect_protocol_enabled(),
}
}
}
impl<T, B> Future for Connection<T, B>
where
T: AsyncRead + AsyncWrite + Unpin + Send + 'static,
B: HttpBody + Send + 'static,
B::Data: Send,
B::Error: Into<Box<dyn StdError + Send + Sync>>,
{
type Output = crate::Result<()>;
fn poll(mut self: Pin<&mut Self>, cx: &mut task::Context<'_>) -> Poll<Self::Output> {
match ready!(Pin::new(self.inner.as_mut().unwrap()).poll(cx))? {
proto::Dispatched::Shutdown => Poll::Ready(Ok(())),
#[cfg(feature = "http1")]
proto::Dispatched::Upgrade(pending) => match self.inner.take() {
Some(ProtoClient::H1 { h1 }) => {
let (io, buf, _) = h1.into_inner();
pending.fulfill(Upgraded::new(io, buf));
Poll::Ready(Ok(()))
}
_ => {
drop(pending);
unreachable!("Upgrade expects h1");
}
},
}
}
}
impl<T, B> fmt::Debug for Connection<T, B>
where
T: AsyncRead + AsyncWrite + fmt::Debug + Send + 'static,
B: HttpBody + 'static,
{
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.debug_struct("Connection").finish()
}
}
// ===== impl Builder
impl Builder {
/// Creates a new connection builder.
#[inline]
pub fn new() -> Builder {
Builder {
exec: Exec::Default,
h09_responses: false,
h1_writev: None,
h1_read_buf_exact_size: None,
h1_parser_config: Default::default(),
h1_title_case_headers: false,
h1_preserve_header_case: false,
#[cfg(feature = "ffi")]
h1_preserve_header_order: false,
h1_max_buf_size: None,
#[cfg(feature = "ffi")]
h1_headers_raw: false,
#[cfg(feature = "http2")]
h2_builder: Default::default(),
#[cfg(feature = "http1")]
version: Proto::Http1,
#[cfg(not(feature = "http1"))]
version: Proto::Http2,
}
}
/// Provide an executor to execute background HTTP2 tasks.
pub fn executor<E>(&mut self, exec: E) -> &mut Builder
where
E: Executor<BoxSendFuture> + Send + Sync + 'static,
{
self.exec = Exec::Executor(Arc::new(exec));
self
}
/// Set whether HTTP/0.9 responses should be tolerated.
///
/// Default is false.
pub fn http09_responses(&mut self, enabled: bool) -> &mut Builder {
self.h09_responses = enabled;
self
}
/// Set whether HTTP/1 connections will accept spaces between header names
/// and the colon that follow them in responses.
///
/// You probably don't need this, here is what [RFC 7230 Section 3.2.4.] has
/// to say about it:
///
/// > No whitespace is allowed between the header field-name and colon. In
/// > the past, differences in the handling of such whitespace have led to
/// > security vulnerabilities in request routing and response handling. A
/// > server MUST reject any received request message that contains
/// > whitespace between a header field-name and colon with a response code
/// > of 400 (Bad Request). A proxy MUST remove any such whitespace from a
/// > response message before forwarding the message downstream.
///
/// Note that this setting does not affect HTTP/2.
///
/// Default is false.
///
pub fn http1_allow_spaces_after_header_name_in_responses(
&mut self,
enabled: bool,
) -> &mut Builder {
self.h1_parser_config
.allow_spaces_after_header_name_in_responses(enabled);
self
}
/// Set whether HTTP/1 connections will accept obsolete line folding for
/// header values.
///
/// Newline codepoints (`\r` and `\n`) will be transformed to spaces when
/// parsing.
///
/// You probably don't need this, here is what [RFC 7230 Section 3.2.4.] has
/// to say about it:
///
/// > A server that receives an obs-fold in a request message that is not
/// > within a message/http container MUST either reject the message by
/// > sending a 400 (Bad Request), preferably with a representation
/// > explaining that obsolete line folding is unacceptable, or replace
/// > each received obs-fold with one or more SP octets prior to
/// > interpreting the field value or forwarding the message downstream.
///
/// > A proxy or gateway that receives an obs-fold in a response message
/// > that is not within a message/http container MUST either discard the
/// > message and replace it with a 502 (Bad Gateway) response, preferably
/// > with a representation explaining that unacceptable line folding was
/// > received, or replace each received obs-fold with one or more SP
/// > octets prior to interpreting the field value or forwarding the
/// > message downstream.
///
/// > A user agent that receives an obs-fold in a response message that is
/// > not within a message/http container MUST replace each received
/// > obs-fold with one or more SP octets prior to interpreting the field
/// > value.
///
/// Note that this setting does not affect HTTP/2.
///
/// Default is false.
///
pub fn http1_allow_obsolete_multiline_headers_in_responses(
&mut self,
enabled: bool,
) -> &mut Builder {
self.h1_parser_config
.allow_obsolete_multiline_headers_in_responses(enabled);
self
}
/// Set whether HTTP/1 connections will silently ignored malformed header lines.
///
/// If this is enabled and and a header line does not start with a valid header
/// name, or does not include a colon at all, the line will be silently ignored
/// and no error will be reported.
///
/// Note that this setting does not affect HTTP/2.
///
/// Default is false.
pub fn http1_ignore_invalid_headers_in_responses(
&mut self,
enabled: bool,
) -> &mut Builder {
self.h1_parser_config
.ignore_invalid_headers_in_responses(enabled);
self
}
/// Set whether HTTP/1 connections should try to use vectored writes,
/// or always flatten into a single buffer.
///
/// Note that setting this to false may mean more copies of body data,
/// but may also improve performance when an IO transport doesn't
/// support vectored writes well, such as most TLS implementations.
///
/// Setting this to true will force hyper to use queued strategy
/// which may eliminate unnecessary cloning on some TLS backends
///
/// Default is `auto`. In this mode hyper will try to guess which
/// mode to use
pub fn http1_writev(&mut self, enabled: bool) -> &mut Builder {
self.h1_writev = Some(enabled);
self
}
/// Set whether HTTP/1 connections will write header names as title case at
/// the socket level.
///
/// Note that this setting does not affect HTTP/2.
///
/// Default is false.
pub fn http1_title_case_headers(&mut self, enabled: bool) -> &mut Builder {
self.h1_title_case_headers = enabled;
self
}
/// Set whether to support preserving original header cases.
///
/// Currently, this will record the original cases received, and store them
/// in a private extension on the `Response`. It will also look for and use
/// such an extension in any provided `Request`.
///
/// Since the relevant extension is still private, there is no way to
/// interact with the original cases. The only effect this can have now is
/// to forward the cases in a proxy-like fashion.
///
/// Note that this setting does not affect HTTP/2.
///
/// Default is false.
pub fn http1_preserve_header_case(&mut self, enabled: bool) -> &mut Builder {
self.h1_preserve_header_case = enabled;
self
}
/// Set whether to support preserving original header order.
///
/// Currently, this will record the order in which headers are received, and store this
/// ordering in a private extension on the `Response`. It will also look for and use
/// such an extension in any provided `Request`.
///
/// Note that this setting does not affect HTTP/2.
///
/// Default is false.
#[cfg(feature = "ffi")]
pub fn http1_preserve_header_order(&mut self, enabled: bool) -> &mut Builder {
self.h1_preserve_header_order = enabled;
self
}
/// Sets the exact size of the read buffer to *always* use.
///
/// Note that setting this option unsets the `http1_max_buf_size` option.
///
/// Default is an adaptive read buffer.
pub fn http1_read_buf_exact_size(&mut self, sz: Option<usize>) -> &mut Builder {
self.h1_read_buf_exact_size = sz;
self.h1_max_buf_size = None;
self
}
/// Set the maximum buffer size for the connection.
///
/// Default is ~400kb.
///
/// Note that setting this option unsets the `http1_read_exact_buf_size` option.
///
/// # Panics
///
/// The minimum value allowed is 8192. This method panics if the passed `max` is less than the minimum.
#[cfg(feature = "http1")]
#[cfg_attr(docsrs, doc(cfg(feature = "http1")))]
pub fn http1_max_buf_size(&mut self, max: usize) -> &mut Self {
assert!(
max >= proto::h1::MINIMUM_MAX_BUFFER_SIZE,
"the max_buf_size cannot be smaller than the minimum that h1 specifies."
);
self.h1_max_buf_size = Some(max);
self.h1_read_buf_exact_size = None;
self
}
#[cfg(feature = "ffi")]
pub(crate) fn http1_headers_raw(&mut self, enabled: bool) -> &mut Self {
self.h1_headers_raw = enabled;
self
}
/// Sets whether HTTP2 is required.
///
/// Default is false.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_only(&mut self, enabled: bool) -> &mut Builder {
if enabled {
self.version = Proto::Http2
}
self
}
/// Sets the [`SETTINGS_INITIAL_WINDOW_SIZE`][spec] option for HTTP2
/// stream-level flow control.
///
/// Passing `None` will do nothing.
///
/// If not set, hyper will use a default.
///
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_initial_stream_window_size(&mut self, sz: impl Into<Option<u32>>) -> &mut Self {
if let Some(sz) = sz.into() {
self.h2_builder.adaptive_window = false;
self.h2_builder.initial_stream_window_size = sz;
}
self
}
/// Sets the max connection-level flow control for HTTP2
///
/// Passing `None` will do nothing.
///
/// If not set, hyper will use a default.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_initial_connection_window_size(
&mut self,
sz: impl Into<Option<u32>>,
) -> &mut Self {
if let Some(sz) = sz.into() {
self.h2_builder.adaptive_window = false;
self.h2_builder.initial_conn_window_size = sz;
}
self
}
/// Sets whether to use an adaptive flow control.
///
/// Enabling this will override the limits set in
/// `http2_initial_stream_window_size` and
/// `http2_initial_connection_window_size`.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_adaptive_window(&mut self, enabled: bool) -> &mut Self {
use proto::h2::SPEC_WINDOW_SIZE;
self.h2_builder.adaptive_window = enabled;
if enabled {
self.h2_builder.initial_conn_window_size = SPEC_WINDOW_SIZE;
self.h2_builder.initial_stream_window_size = SPEC_WINDOW_SIZE;
}
self
}
/// Sets the maximum frame size to use for HTTP2.
///
/// Passing `None` will do nothing.
///
/// If not set, hyper will use a default.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_max_frame_size(&mut self, sz: impl Into<Option<u32>>) -> &mut Self {
if let Some(sz) = sz.into() {
self.h2_builder.max_frame_size = sz;
}
self
}
/// Sets an interval for HTTP2 Ping frames should be sent to keep a
/// connection alive.
///
/// Pass `None` to disable HTTP2 keep-alive.
///
/// Default is currently disabled.
///
/// # Cargo Feature
///
/// Requires the `runtime` cargo feature to be enabled.
#[cfg(feature = "runtime")]
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_keep_alive_interval(
&mut self,
interval: impl Into<Option<Duration>>,
) -> &mut Self {
self.h2_builder.keep_alive_interval = interval.into();
self
}
/// Sets a timeout for receiving an acknowledgement of the keep-alive ping.
///
/// If the ping is not acknowledged within the timeout, the connection will
/// be closed. Does nothing if `http2_keep_alive_interval` is disabled.
///
/// Default is 20 seconds.
///
/// # Cargo Feature
///
/// Requires the `runtime` cargo feature to be enabled.
#[cfg(feature = "runtime")]
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_keep_alive_timeout(&mut self, timeout: Duration) -> &mut Self {
self.h2_builder.keep_alive_timeout = timeout;
self
}
/// Sets whether HTTP2 keep-alive should apply while the connection is idle.
///
/// If disabled, keep-alive pings are only sent while there are open
/// request/responses streams. If enabled, pings are also sent when no
/// streams are active. Does nothing if `http2_keep_alive_interval` is
/// disabled.
///
/// Default is `false`.
///
/// # Cargo Feature
///
/// Requires the `runtime` cargo feature to be enabled.
#[cfg(feature = "runtime")]
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_keep_alive_while_idle(&mut self, enabled: bool) -> &mut Self {
self.h2_builder.keep_alive_while_idle = enabled;
self
}
/// Sets the maximum number of HTTP2 concurrent locally reset streams.
///
/// See the documentation of [`h2::client::Builder::max_concurrent_reset_streams`] for more
/// details.
///
/// The default value is determined by the `h2` crate.
///
/// [`h2::client::Builder::max_concurrent_reset_streams`]: https://docs.rs/h2/client/struct.Builder.html#method.max_concurrent_reset_streams
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_max_concurrent_reset_streams(&mut self, max: usize) -> &mut Self {
self.h2_builder.max_concurrent_reset_streams = Some(max);
self
}
/// Set the maximum write buffer size for each HTTP/2 stream.
///
/// Default is currently 1MB, but may change.
///
/// # Panics
///
/// The value must be no larger than `u32::MAX`.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_max_send_buf_size(&mut self, max: usize) -> &mut Self {
assert!(max <= std::u32::MAX as usize);
self.h2_builder.max_send_buffer_size = max;
self
}
/// Constructs a connection with the configured options and IO.
/// See [`client::conn`](crate::client::conn) for more.
///
/// Note, if [`Connection`] is not `await`-ed, [`SendRequest`] will
/// do nothing.
pub fn handshake<T, B>(
&self,
io: T,
) -> impl Future<Output = crate::Result<(SendRequest<B>, Connection<T, B>)>>
where
T: AsyncRead + AsyncWrite + Unpin + Send + 'static,
B: HttpBody + 'static,
B::Data: Send,
B::Error: Into<Box<dyn StdError + Send + Sync>>,
{
let opts = self.clone();
async move {
trace!("client handshake {:?}", opts.version);
let (tx, rx) = dispatch::channel();
let proto = match opts.version {
#[cfg(feature = "http1")]
Proto::Http1 => {
let mut conn = proto::Conn::new(io);
conn.set_h1_parser_config(opts.h1_parser_config);
if let Some(writev) = opts.h1_writev {
if writev {
conn.set_write_strategy_queue();
} else {
conn.set_write_strategy_flatten();
}
}
if opts.h1_title_case_headers {
conn.set_title_case_headers();
}
if opts.h1_preserve_header_case {
conn.set_preserve_header_case();
}
#[cfg(feature = "ffi")]
if opts.h1_preserve_header_order {
conn.set_preserve_header_order();
}
if opts.h09_responses {
conn.set_h09_responses();
}
#[cfg(feature = "ffi")]
conn.set_raw_headers(opts.h1_headers_raw);
if let Some(sz) = opts.h1_read_buf_exact_size {
conn.set_read_buf_exact_size(sz);
}
if let Some(max) = opts.h1_max_buf_size {
conn.set_max_buf_size(max);
}
let cd = proto::h1::dispatch::Client::new(rx);
let dispatch = proto::h1::Dispatcher::new(cd, conn);
ProtoClient::H1 { h1: dispatch }
}
#[cfg(feature = "http2")]
Proto::Http2 => {
let h2 =
proto::h2::client::handshake(io, rx, &opts.h2_builder, opts.exec.clone())
.await?;
ProtoClient::H2 { h2 }
}
};
Ok((
SendRequest { dispatch: tx },
Connection { inner: Some(proto) },
))
}
}
}
// ===== impl ResponseFuture
impl Future for ResponseFuture {
type Output = crate::Result<Response<Body>>;
fn poll(mut self: Pin<&mut Self>, cx: &mut task::Context<'_>) -> Poll<Self::Output> {
match self.inner {
ResponseFutureState::Waiting(ref mut rx) => {
Pin::new(rx).poll(cx).map(|res| match res {
Ok(Ok(resp)) => Ok(resp),
Ok(Err(err)) => Err(err),
// this is definite bug if it happens, but it shouldn't happen!
Err(_canceled) => panic!("dispatch dropped without returning error"),
})
}
ResponseFutureState::Error(ref mut err) => {
Poll::Ready(Err(err.take().expect("polled after ready")))
}
}
}
}
impl fmt::Debug for ResponseFuture {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.debug_struct("ResponseFuture").finish()
}
}
// ===== impl ProtoClient
impl<T, B> Future for ProtoClient<T, B>
where
T: AsyncRead + AsyncWrite + Send + Unpin + 'static,
B: HttpBody + Send + 'static,
B::Data: Send,
B::Error: Into<Box<dyn StdError + Send + Sync>>,
{
type Output = crate::Result<proto::Dispatched>;
fn poll(self: Pin<&mut Self>, cx: &mut task::Context<'_>) -> Poll<Self::Output> {
match self.project() {
#[cfg(feature = "http1")]
ProtoClientProj::H1 { h1 } => h1.poll(cx),
#[cfg(feature = "http2")]
ProtoClientProj::H2 { h2, .. } => h2.poll(cx),
#[cfg(not(feature = "http1"))]
ProtoClientProj::H1 { h1 } => match h1.0 {},
#[cfg(not(feature = "http2"))]
ProtoClientProj::H2 { h2, .. } => match h2.0 {},
}
}
}
// assert trait markers
trait AssertSend: Send {}
trait AssertSendSync: Send + Sync {}
#[doc(hidden)]
impl<B: Send> AssertSendSync for SendRequest<B> {}
#[doc(hidden)]
impl<T: Send, B: Send> AssertSend for Connection<T, B>
where
T: AsyncRead + AsyncWrite + Send + 'static,
B: HttpBody + 'static,
B::Data: Send,
{
}
#[doc(hidden)]
impl<T: Send + Sync, B: Send + Sync> AssertSendSync for Connection<T, B>
where
T: AsyncRead + AsyncWrite + Send + 'static,
B: HttpBody + 'static,
B::Data: Send + Sync + 'static,
{
}
#[doc(hidden)]
impl AssertSendSync for Builder {}
#[doc(hidden)]
impl AssertSend for ResponseFuture {}