Revision control
Copy as Markdown
Other Tools
//! `hermit-abi` is small interface to call functions from the unikernel
#![no_std]
#![allow(clippy::missing_safety_doc)]
#![allow(clippy::result_unit_err)]
extern crate libc;
pub mod tcplistener;
pub mod tcpstream;
use libc::c_void;
// sysmbols, which are part of the library operating system
extern "Rust" {
fn sys_secure_rand64() -> Option<u64>;
fn sys_secure_rand32() -> Option<u32>;
}
extern "C" {
fn sys_rand() -> u32;
fn sys_srand(seed: u32);
fn sys_get_processor_count() -> usize;
fn sys_malloc(size: usize, align: usize) -> *mut u8;
fn sys_realloc(ptr: *mut u8, size: usize, align: usize, new_size: usize) -> *mut u8;
fn sys_free(ptr: *mut u8, size: usize, align: usize);
fn sys_init_queue(ptr: usize) -> i32;
fn sys_notify(id: usize, count: i32) -> i32;
fn sys_add_queue(id: usize, timeout_ns: i64) -> i32;
fn sys_wait(id: usize) -> i32;
fn sys_destroy_queue(id: usize) -> i32;
fn sys_read(fd: i32, buf: *mut u8, len: usize) -> isize;
fn sys_write(fd: i32, buf: *const u8, len: usize) -> isize;
fn sys_close(fd: i32) -> i32;
fn sys_sem_init(sem: *mut *const c_void, value: u32) -> i32;
fn sys_sem_destroy(sem: *const c_void) -> i32;
fn sys_sem_post(sem: *const c_void) -> i32;
fn sys_sem_trywait(sem: *const c_void) -> i32;
fn sys_sem_timedwait(sem: *const c_void, ms: u32) -> i32;
fn sys_recmutex_init(recmutex: *mut *const c_void) -> i32;
fn sys_recmutex_destroy(recmutex: *const c_void) -> i32;
fn sys_recmutex_lock(recmutex: *const c_void) -> i32;
fn sys_recmutex_unlock(recmutex: *const c_void) -> i32;
fn sys_getpid() -> u32;
fn sys_exit(arg: i32) -> !;
fn sys_abort() -> !;
fn sys_usleep(usecs: u64);
fn sys_spawn(
id: *mut Tid,
func: extern "C" fn(usize),
arg: usize,
prio: u8,
core_id: isize,
) -> i32;
fn sys_spawn2(
func: extern "C" fn(usize),
arg: usize,
prio: u8,
stack_size: usize,
core_id: isize,
) -> Tid;
fn sys_join(id: Tid) -> i32;
fn sys_yield();
fn sys_clock_gettime(clock_id: u64, tp: *mut timespec) -> i32;
fn sys_open(name: *const i8, flags: i32, mode: i32) -> i32;
fn sys_unlink(name: *const i8) -> i32;
fn sys_network_init() -> i32;
fn sys_block_current_task();
fn sys_wakeup_task(tid: Tid);
fn sys_get_priority() -> u8;
}
/// A thread handle type
pub type Tid = u32;
/// Maximum number of priorities
pub const NO_PRIORITIES: usize = 31;
/// Priority of a thread
#[derive(PartialEq, Eq, PartialOrd, Ord, Debug, Clone, Copy)]
pub struct Priority(u8);
impl Priority {
pub const fn into(self) -> u8 {
self.0
}
pub const fn from(x: u8) -> Self {
Priority(x)
}
}
pub const HIGH_PRIO: Priority = Priority::from(3);
pub const NORMAL_PRIO: Priority = Priority::from(2);
pub const LOW_PRIO: Priority = Priority::from(1);
/// A handle, identifying a socket
#[derive(Debug, Clone, Copy, PartialEq, Eq, PartialOrd, Ord, Default, Hash)]
pub struct Handle(usize);
pub const NSEC_PER_SEC: u64 = 1_000_000_000;
pub const CLOCK_REALTIME: u64 = 1;
pub const CLOCK_MONOTONIC: u64 = 4;
pub const STDIN_FILENO: libc::c_int = 0;
pub const STDOUT_FILENO: libc::c_int = 1;
pub const STDERR_FILENO: libc::c_int = 2;
pub const O_RDONLY: i32 = 0o0;
pub const O_WRONLY: i32 = 0o1;
pub const O_RDWR: i32 = 0o2;
pub const O_CREAT: i32 = 0o100;
pub const O_EXCL: i32 = 0o200;
pub const O_TRUNC: i32 = 0o1000;
pub const O_APPEND: i32 = 0o2000;
/// returns true if file descriptor `fd` is a tty
pub fn isatty(_fd: libc::c_int) -> bool {
false
}
/// intialize the network stack
pub fn network_init() -> i32 {
unsafe { sys_network_init() }
}
/// `timespec` is used by `clock_gettime` to retrieve the
/// current time
#[derive(Copy, Clone, Debug)]
#[repr(C)]
pub struct timespec {
/// seconds
pub tv_sec: i64,
/// nanoseconds
pub tv_nsec: i64,
}
/// Internet protocol version.
#[derive(Debug, Hash, PartialEq, Eq, PartialOrd, Ord, Clone, Copy)]
pub enum Version {
Unspecified,
Ipv4,
Ipv6,
}
/// A four-octet IPv4 address.
#[derive(Debug, Hash, PartialEq, Eq, PartialOrd, Ord, Clone, Copy, Default)]
pub struct Ipv4Address(pub [u8; 4]);
/// A sixteen-octet IPv6 address.
#[derive(Debug, Hash, PartialEq, Eq, PartialOrd, Ord, Clone, Copy, Default)]
pub struct Ipv6Address(pub [u8; 16]);
/// An internetworking address.
#[derive(Debug, Hash, PartialEq, Eq, PartialOrd, Ord, Clone, Copy)]
pub enum IpAddress {
/// An unspecified address.
/// May be used as a placeholder for storage where the address is not assigned yet.
Unspecified,
/// An IPv4 address.
Ipv4(Ipv4Address),
/// An IPv6 address.
Ipv6(Ipv6Address),
}
/// determines the number of activated processors
#[inline(always)]
pub unsafe fn get_processor_count() -> usize {
sys_get_processor_count()
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn malloc(size: usize, align: usize) -> *mut u8 {
sys_malloc(size, align)
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn realloc(ptr: *mut u8, size: usize, align: usize, new_size: usize) -> *mut u8 {
sys_realloc(ptr, size, align, new_size)
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn free(ptr: *mut u8, size: usize, align: usize) {
sys_free(ptr, size, align)
}
#[inline(always)]
pub unsafe fn notify(id: usize, count: i32) -> i32 {
sys_notify(id, count)
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn add_queue(id: usize, timeout_ns: i64) -> i32 {
sys_add_queue(id, timeout_ns)
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn wait(id: usize) -> i32 {
sys_wait(id)
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn init_queue(id: usize) -> i32 {
sys_init_queue(id)
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn destroy_queue(id: usize) -> i32 {
sys_destroy_queue(id)
}
/// read from a file descriptor
///
/// read() attempts to read `len` bytes of data from the object
/// referenced by the descriptor `fd` into the buffer pointed
/// to by `buf`.
#[inline(always)]
pub unsafe fn read(fd: i32, buf: *mut u8, len: usize) -> isize {
sys_read(fd, buf, len)
}
/// write to a file descriptor
///
/// write() attempts to write `len` of data to the object
/// referenced by the descriptor `fd` from the
/// buffer pointed to by `buf`.
#[inline(always)]
pub unsafe fn write(fd: i32, buf: *const u8, len: usize) -> isize {
sys_write(fd, buf, len)
}
/// close a file descriptor
///
/// The close() call deletes a file descriptor `fd` from the object
/// reference table.
#[inline(always)]
pub unsafe fn close(fd: i32) -> i32 {
sys_close(fd)
}
/// sem_init() initializes the unnamed semaphore at the address
/// pointed to by `sem`. The `value` argument specifies the
/// initial value for the semaphore.
#[inline(always)]
pub unsafe fn sem_init(sem: *mut *const c_void, value: u32) -> i32 {
sys_sem_init(sem, value)
}
/// sem_destroy() frees the unnamed semaphore at the address
/// pointed to by `sem`.
#[inline(always)]
pub unsafe fn sem_destroy(sem: *const c_void) -> i32 {
sys_sem_destroy(sem)
}
/// sem_post() increments the semaphore pointed to by `sem`.
/// If the semaphore's value consequently becomes greater
/// than zero, then another thread blocked in a sem_wait call
/// will be woken up and proceed to lock the semaphore.
#[inline(always)]
pub unsafe fn sem_post(sem: *const c_void) -> i32 {
sys_sem_post(sem)
}
/// try to decrement a semaphore
///
/// sem_trywait() is the same as sem_timedwait(), except that
/// if the decrement cannot be immediately performed, then call
/// returns a negative value instead of blocking.
#[inline(always)]
pub unsafe fn sem_trywait(sem: *const c_void) -> i32 {
sys_sem_trywait(sem)
}
/// decrement a semaphore
///
/// sem_timedwait() decrements the semaphore pointed to by `sem`.
/// If the semaphore's value is greater than zero, then the
/// the function returns immediately. If the semaphore currently
/// has the value zero, then the call blocks until either
/// it becomes possible to perform the decrement of the time limit
/// to wait for the semaphore is expired. A time limit `ms` of
/// means infinity waiting time.
#[inline(always)]
pub unsafe fn sem_timedwait(sem: *const c_void, ms: u32) -> i32 {
sys_sem_timedwait(sem, ms)
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn recmutex_init(recmutex: *mut *const c_void) -> i32 {
sys_recmutex_init(recmutex)
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn recmutex_destroy(recmutex: *const c_void) -> i32 {
sys_recmutex_destroy(recmutex)
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn recmutex_lock(recmutex: *const c_void) -> i32 {
sys_recmutex_lock(recmutex)
}
#[doc(hidden)]
#[inline(always)]
pub unsafe fn recmutex_unlock(recmutex: *const c_void) -> i32 {
sys_recmutex_unlock(recmutex)
}
/// Determines the id of the current thread
#[inline(always)]
pub unsafe fn getpid() -> u32 {
sys_getpid()
}
/// cause normal termination and return `arg`
/// to the host system
#[inline(always)]
pub unsafe fn exit(arg: i32) -> ! {
sys_exit(arg)
}
/// cause abnormal termination
#[inline(always)]
pub unsafe fn abort() -> ! {
sys_abort()
}
/// suspend execution for microsecond intervals
///
/// The usleep() function suspends execution of the calling
/// thread for (at least) `usecs` microseconds.
#[inline(always)]
pub unsafe fn usleep(usecs: u64) {
sys_usleep(usecs)
}
/// spawn a new thread
///
/// spawn() starts a new thread. The new thread starts execution
/// by invoking `func(usize)`; `arg` is passed as the argument
/// to `func`. `prio` defines the priority of the new thread,
/// which can be between `LOW_PRIO` and `HIGH_PRIO`.
/// `core_id` defines the core, where the thread is located.
/// A negative value give the operating system the possibility
/// to select the core by its own.
#[inline(always)]
pub unsafe fn spawn(
id: *mut Tid,
func: extern "C" fn(usize),
arg: usize,
prio: u8,
core_id: isize,
) -> i32 {
sys_spawn(id, func, arg, prio, core_id)
}
/// spawn a new thread with user-specified stack size
///
/// spawn2() starts a new thread. The new thread starts execution
/// by invoking `func(usize)`; `arg` is passed as the argument
/// to `func`. `prio` defines the priority of the new thread,
/// which can be between `LOW_PRIO` and `HIGH_PRIO`.
/// `core_id` defines the core, where the thread is located.
/// A negative value give the operating system the possibility
/// to select the core by its own.
/// In contrast to spawn(), spawn2() is able to define the
/// stack size.
#[inline(always)]
pub unsafe fn spawn2(
func: extern "C" fn(usize),
arg: usize,
prio: u8,
stack_size: usize,
core_id: isize,
) -> Tid {
sys_spawn2(func, arg, prio, stack_size, core_id)
}
/// join with a terminated thread
///
/// The join() function waits for the thread specified by `id`
/// to terminate.
#[inline(always)]
pub unsafe fn join(id: Tid) -> i32 {
sys_join(id)
}
/// yield the processor
///
/// causes the calling thread to relinquish the CPU. The thread
/// is moved to the end of the queue for its static priority.
#[inline(always)]
pub unsafe fn yield_now() {
sys_yield()
}
/// get current time
///
/// The clock_gettime() functions allow the calling thread
/// to retrieve the value used by a clock which is specified
/// by `clock_id`.
///
/// `CLOCK_REALTIME`: the system's real time clock,
/// expressed as the amount of time since the Epoch.
///
/// `CLOCK_MONOTONIC`: clock that increments monotonically,
/// tracking the time since an arbitrary point
#[inline(always)]
pub unsafe fn clock_gettime(clock_id: u64, tp: *mut timespec) -> i32 {
sys_clock_gettime(clock_id, tp)
}
/// open and possibly create a file
///
/// The open() system call opens the file specified by `name`.
/// If the specified file does not exist, it may optionally
/// be created by open().
#[inline(always)]
pub unsafe fn open(name: *const i8, flags: i32, mode: i32) -> i32 {
sys_open(name, flags, mode)
}
/// delete the file it refers to `name`
#[inline(always)]
pub unsafe fn unlink(name: *const i8) -> i32 {
sys_unlink(name)
}
/// The largest number `rand` will return
pub const RAND_MAX: u64 = 2_147_483_647;
/// The function computes a sequence of pseudo-random integers
/// in the range of 0 to RAND_MAX
#[inline(always)]
pub unsafe fn rand() -> u32 {
sys_rand()
}
/// The function sets its argument as the seed for a new sequence
/// of pseudo-random numbers to be returned by `rand`
#[inline(always)]
pub unsafe fn srand(seed: u32) {
sys_srand(seed);
}
/// Create a cryptographicly secure 32bit random number with the support of
/// the underlying hardware. If the required hardware isn't available,
/// the function returns `None`.
#[inline(always)]
pub unsafe fn secure_rand32() -> Option<u32> {
sys_secure_rand32()
}
/// Create a cryptographicly secure 64bit random number with the support of
/// the underlying hardware. If the required hardware isn't available,
/// the function returns `None`.
#[inline(always)]
pub unsafe fn secure_rand64() -> Option<u64> {
sys_secure_rand64()
}
/// Add current task to the queue of blocked tasl. After calling `block_current_task`,
/// call `yield_now` to switch to another task.
#[inline(always)]
pub unsafe fn block_current_task() {
sys_block_current_task();
}
/// Wakeup task with the thread id `tid`
#[inline(always)]
pub unsafe fn wakeup_task(tid: Tid) {
sys_wakeup_task(tid);
}
/// Determine the priority of the current thread
#[inline(always)]
pub unsafe fn get_priority() -> Priority {
Priority::from(sys_get_priority())
}