Revision control
Copy as Markdown
Other Tools
/* -*- Mode: IDL; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
#include "nsISupports.idl"
#include "MailNewsTypes2.idl"
interface nsIURI;
interface nsIUrlListener;
interface nsIStreamListener;
interface nsIMsgWindow;
interface nsIFile;
interface nsIMsgFolder;
interface nsIMsgSearchSession;
interface nsIMsgDBHdr;
interface nsIStreamConverter;
interface nsIDocShell;
%{C++
#include "MailNewsTypes.h"
%}
/**
* nsIMsgMessageService provides higher-level, UI-oriented calls for
* dealing with messages in a protocol-agnostic way.
* Things the user would recognise as actions they initiated.
* This covers things like displaying messages, copying them, saving them
* to disk, saving attachments...
*/
[scriptable, uuid(3aa7080a-73ac-4394-9636-fc00e182319b)]
interface nsIMsgMessageService : nsISupports {
/**
* If you want a handle on the running task, pass in a valid nsIURI
* ptr. You can later interrupt this action by asking the netlib
* service manager to interrupt the url you are given back.
* Remember to release aURL when you are done with it. Pass nullptr
* in for aURL if you don't care about the returned URL.
*/
/**
* Pass in the URI for the message you want to have copied.
*
* @param aSrcURI The URI of the message to copy. This URI usually uses
* the protocol-specific message scheme (e.g.
* `ews-message` or `mailbox-message`), and follows the
* @param aCopyListener already knows about the destination folder.
* @param aMoveMessage TRUE if you want the message to be moved.
* FALSE leaves it as just a copy.
* @param aUrlListener
* @param aMsgWindow
*/
void copyMessage(in AUTF8String aSrcURI, in nsIStreamListener aCopyListener, in boolean aMoveMessage,
in nsIUrlListener aUrlListener, in nsIMsgWindow aMsgWindow);
/**
* Copy multiple messages at a time.
*
* @param keys
* @param srcFolder
* @param aCopyListener
* @param aMoveMessage
* @param aUrlListener
* @param aMsgWindow
* @returns URI that's run to perform the copy
*/
nsIURI CopyMessages(in Array<nsMsgKey> aKeys,
in nsIMsgFolder srcFolder,
in nsIStreamListener aCopyListener,
in boolean aMoveMessage,
in nsIUrlListener aUrlListener,
in nsIMsgWindow aMsgWindow);
/**
* When you want a message displayed... this loads it into the docshell
* consumer.
*
* @param aMessageURI - A uri representing the message to display.
* @param aDocShell - A nsIDocShell which we'll use to load the message into.
* @param aMsgWindow
* @param aUrlListener
* @param aAutodetectCharset Whether the characterset should be auto-detected.
*/
void loadMessage(in AUTF8String aMessageURI,
in nsIDocShell aDocShell,
in nsIMsgWindow aMsgWindow,
in nsIUrlListener aUrlListener,
in boolean aAutodetectCharset);
/**
* When you want to spool a message out to a file on disk.
* This is an asynch operation of course. You must pass in a
* url listener in order to figure out when the operation is done.
*
* @param aMessageURI The uri representing the message to spool out to disk.
* @param aFile The file you want the message saved to
* @param aGenerateDummyEnvelope Usually FALSE. Set to TRUE if you want the msg
* appended at the end of the file.
* @param aUrlListener
* @param canonicalLineEnding
* @param aMsgWindow
*/
void saveMessageToDisk(in AUTF8String aMessageURI, in nsIFile aFile,
in boolean aGenerateDummyEnvelope,
in nsIUrlListener aUrlListener,
in boolean canonicalLineEnding, in nsIMsgWindow aMsgWindow);
/**
* When you have a uri and you would like to convert that
* to a url which can be run through necko, you can use this method.
* the Uri MUST refer to a message and not a folder!
*
* @param aMessageURI A message uri to convert.
* @param aMsgWindow
*
* @return a URL which can be run through necko
*/
nsIURI getUrlForUri(in AUTF8String aMessageURI, [optional] in nsIMsgWindow aMsgWindow);
/**
*
*
* @param aSearchSession
* @param aMsgWindow
* @param aMsgFolder
* @param aSearchUri
*/
void Search(in nsIMsgSearchSession aSearchSession, in nsIMsgWindow aMsgWindow, in nsIMsgFolder aMsgFolder, in AUTF8String aSearchUri);
/**
* This method streams a message to the passed in consumer. If aConvertData is true, it
* will create a stream converter from message rfc822 to star/star. It will also tack
* aAdditionalHeader onto the url (e.g., "header=filter").
*
* @param aMessageURI - The uri of message to stream.
* @param aStreamlistener - A streamlistener listening to the message.
* @param aMsgWindow - msgWindow for progress and status feedback.
* @param aUrlListener - Gets notified when url starts and stops.
* @param aConvertData - Whether to send data through a stream converter.
* @param aAdditionalHeader - Added to URI, e.g., "header=filter".
* @param aLocalOnly - Whether data should be retrieved only from local caches
* If streaming over the network is required and this is true, then
* an exception is thrown. This defaults to false.
* NOTE: If we're offline, then even if aLocalOnly is false, we won't stream
* over the network.
*
* @return the URL that gets run
*/
nsIURI streamMessage(in AUTF8String aMessageURI,
in nsIStreamListener aStreamlistener,
in nsIMsgWindow aMsgWindow,
in nsIUrlListener aUrlListener,
in boolean aConvertData,
in AUTF8String aAdditionalHeader,
[optional] in boolean aLocalOnly);
/**
* This method streams a message's headers to the passed in consumer.
* This is for consumers who want a particular header but don't
* want to stream the whole message.
*
* @param aMessageURI uri of message whose headers we are to stream
* @param aConsumer a stream listener listening to the message
headers.
* @param aUrlListener gets notified when url starts and stops, if we run a url.
* @param aLocalOnly whether data should be retrieved only from local caches
* If streaming over the network is required and this is true, then
* an exception is thrown. This defaults to false.
* NOTE: If we're offline, then even if aLocalOnly is false, we won't stream
* over the network.
*
* @return the URL that gets run, if any.
*/
nsIURI streamHeaders(in AUTF8String aMessageURI, in nsIStreamListener aConsumer,
in nsIUrlListener aUrlListener,
[optional] in boolean aLocalOnly);
/**
* Determines whether a message is in the memory cache. Local folders
* don't implement this.
* The URL needs to address a message, not a message part, all query
* qualifiers will be stripped before looking up the entry in the cache.
*
* @param aUrl The URL of the message, possibly with an appropriate command in it
* @param aFolder The folder this message is in
*
* @return TRUE if the message is in mem cache; FALSE if it is not.
*/
boolean isMsgInMemCache(in nsIURI aUrl,
in nsIMsgFolder aFolder);
/**
* now the the message datasource is going away
* we need away to go from message uri to go nsIMsgDBHdr
*
* @param uri A message uri to get nsIMsgDBHdr for.
*
* @return nsIMsgDBHdr for specified uri or null if failed.
*/
nsIMsgDBHdr messageURIToMsgHdr(in AUTF8String uri);
};
/**
* Some mail protocols (like imap) allow you to fetch individual mime parts. We use this interface
* to represent message services whose protocols support this. To use this interface, you should get
* the message service then QI for this interface. If it's present, then can fetch a mime part.
*/
[scriptable, uuid(3728C255-480C-11d4-98D0-001083010E9B)]
interface nsIMsgMessageFetchPartService : nsISupports
{
/**
* Used to fetch an individual mime part
*
* @param aURI url representing the message
* @param aMessageURI RDF URI including the part to fetch
* @param aStreamListener
* @param aMsgWindow
* @param aUrlListener
*
* @return
*/
nsIURI fetchMimePart(in nsIURI aURI, in AUTF8String aMessageUri,
in nsIStreamListener aStreamListener,
in nsIMsgWindow aMsgWindow,
in nsIUrlListener aUrlListener);
};