Source code
Revision control
Copy as Markdown
Other Tools
use std::error::Error as StdError;
use std::fmt;
#[cfg(feature = "tcp")]
use std::net::{SocketAddr, TcpListener as StdTcpListener};
#[cfg(feature = "tcp")]
use std::time::Duration;
use pin_project_lite::pin_project;
use tokio::io::{AsyncRead, AsyncWrite};
use tracing::trace;
use super::accept::Accept;
#[cfg(all(feature = "tcp"))]
use super::tcp::AddrIncoming;
use crate::body::{Body, HttpBody};
use crate::common::exec::Exec;
use crate::common::exec::{ConnStreamExec, NewSvcExec};
use crate::common::{task, Future, Pin, Poll, Unpin};
// Renamed `Http` as `Http_` for now so that people upgrading don't see an
// error that `hyper::server::Http` is private...
use super::conn::{Connection, Http as Http_, UpgradeableConnection};
use super::shutdown::{Graceful, GracefulWatcher};
use crate::service::{HttpService, MakeServiceRef};
use self::new_svc::NewSvcTask;
pin_project! {
/// A listening HTTP server that accepts connections in both HTTP1 and HTTP2 by default.
///
/// `Server` is a `Future` mapping a bound listener with a set of service
/// handlers. It is built using the [`Builder`](Builder), and the future
/// completes when the server has been shutdown. It should be run by an
/// `Executor`.
pub struct Server<I, S, E = Exec> {
#[pin]
incoming: I,
make_service: S,
protocol: Http_<E>,
}
}
/// A builder for a [`Server`](Server).
#[derive(Debug)]
#[cfg_attr(docsrs, doc(cfg(any(feature = "http1", feature = "http2"))))]
pub struct Builder<I, E = Exec> {
incoming: I,
protocol: Http_<E>,
}
// ===== impl Server =====
#[cfg_attr(docsrs, doc(cfg(any(feature = "http1", feature = "http2"))))]
impl<I> Server<I, ()> {
/// Starts a [`Builder`](Builder) with the provided incoming stream.
pub fn builder(incoming: I) -> Builder<I> {
Builder {
incoming,
protocol: Http_::new(),
}
}
}
#[cfg(feature = "tcp")]
#[cfg_attr(
docsrs,
doc(cfg(all(feature = "tcp", any(feature = "http1", feature = "http2"))))
)]
impl Server<AddrIncoming, ()> {
/// Binds to the provided address, and returns a [`Builder`](Builder).
///
/// # Panics
///
/// This method will panic if binding to the address fails. For a method
/// to bind to an address and return a `Result`, see `Server::try_bind`.
pub fn bind(addr: &SocketAddr) -> Builder<AddrIncoming> {
let incoming = AddrIncoming::new(addr).unwrap_or_else(|e| {
panic!("error binding to {}: {}", addr, e);
});
Server::builder(incoming)
}
/// Tries to bind to the provided address, and returns a [`Builder`](Builder).
pub fn try_bind(addr: &SocketAddr) -> crate::Result<Builder<AddrIncoming>> {
AddrIncoming::new(addr).map(Server::builder)
}
/// Create a new instance from a `std::net::TcpListener` instance.
pub fn from_tcp(listener: StdTcpListener) -> Result<Builder<AddrIncoming>, crate::Error> {
AddrIncoming::from_std(listener).map(Server::builder)
}
}
#[cfg(feature = "tcp")]
#[cfg_attr(
docsrs,
doc(cfg(all(feature = "tcp", any(feature = "http1", feature = "http2"))))
)]
impl<S, E> Server<AddrIncoming, S, E> {
/// Returns the local address that this server is bound to.
pub fn local_addr(&self) -> SocketAddr {
self.incoming.local_addr()
}
}
#[cfg_attr(docsrs, doc(cfg(any(feature = "http1", feature = "http2"))))]
impl<I, IO, IE, S, E, B> Server<I, S, E>
where
I: Accept<Conn = IO, Error = IE>,
IE: Into<Box<dyn StdError + Send + Sync>>,
IO: AsyncRead + AsyncWrite + Unpin + Send + 'static,
S: MakeServiceRef<IO, Body, ResBody = B>,
S::Error: Into<Box<dyn StdError + Send + Sync>>,
B: HttpBody + 'static,
B::Error: Into<Box<dyn StdError + Send + Sync>>,
E: ConnStreamExec<<S::Service as HttpService<Body>>::Future, B>,
{
/// Prepares a server to handle graceful shutdown when the provided future
/// completes.
///
/// # Example
///
/// ```
/// # fn main() {}
/// # #[cfg(feature = "tcp")]
/// # async fn run() {
/// # use hyper::{Body, Response, Server, Error};
/// # use hyper::service::{make_service_fn, service_fn};
/// # let make_service = make_service_fn(|_| async {
/// # Ok::<_, Error>(service_fn(|_req| async {
/// # Ok::<_, Error>(Response::new(Body::from("Hello World")))
/// # }))
/// # });
/// // Make a server from the previous examples...
/// let server = Server::bind(&([127, 0, 0, 1], 3000).into())
/// .serve(make_service);
///
/// // Prepare some signal for when the server should start shutting down...
/// let (tx, rx) = tokio::sync::oneshot::channel::<()>();
/// let graceful = server
/// .with_graceful_shutdown(async {
/// rx.await.ok();
/// });
///
/// // Await the `server` receiving the signal...
/// if let Err(e) = graceful.await {
/// eprintln!("server error: {}", e);
/// }
///
/// // And later, trigger the signal by calling `tx.send(())`.
/// let _ = tx.send(());
/// # }
/// ```
pub fn with_graceful_shutdown<F>(self, signal: F) -> Graceful<I, S, F, E>
where
F: Future<Output = ()>,
E: NewSvcExec<IO, S::Future, S::Service, E, GracefulWatcher>,
{
Graceful::new(self, signal)
}
fn poll_next_(
self: Pin<&mut Self>,
cx: &mut task::Context<'_>,
) -> Poll<Option<crate::Result<Connecting<IO, S::Future, E>>>> {
let me = self.project();
match ready!(me.make_service.poll_ready_ref(cx)) {
Ok(()) => (),
Err(e) => {
trace!("make_service closed");
return Poll::Ready(Some(Err(crate::Error::new_user_make_service(e))));
}
}
if let Some(item) = ready!(me.incoming.poll_accept(cx)) {
let io = item.map_err(crate::Error::new_accept)?;
let new_fut = me.make_service.make_service_ref(&io);
Poll::Ready(Some(Ok(Connecting {
future: new_fut,
io: Some(io),
protocol: me.protocol.clone(),
})))
} else {
Poll::Ready(None)
}
}
pub(super) fn poll_watch<W>(
mut self: Pin<&mut Self>,
cx: &mut task::Context<'_>,
watcher: &W,
) -> Poll<crate::Result<()>>
where
E: NewSvcExec<IO, S::Future, S::Service, E, W>,
W: Watcher<IO, S::Service, E>,
{
loop {
if let Some(connecting) = ready!(self.as_mut().poll_next_(cx)?) {
let fut = NewSvcTask::new(connecting, watcher.clone());
self.as_mut().project().protocol.exec.execute_new_svc(fut);
} else {
return Poll::Ready(Ok(()));
}
}
}
}
#[cfg_attr(docsrs, doc(cfg(any(feature = "http1", feature = "http2"))))]
impl<I, IO, IE, S, B, E> Future for Server<I, S, E>
where
I: Accept<Conn = IO, Error = IE>,
IE: Into<Box<dyn StdError + Send + Sync>>,
IO: AsyncRead + AsyncWrite + Unpin + Send + 'static,
S: MakeServiceRef<IO, Body, ResBody = B>,
S::Error: Into<Box<dyn StdError + Send + Sync>>,
B: HttpBody + 'static,
B::Error: Into<Box<dyn StdError + Send + Sync>>,
E: ConnStreamExec<<S::Service as HttpService<Body>>::Future, B>,
E: NewSvcExec<IO, S::Future, S::Service, E, NoopWatcher>,
{
type Output = crate::Result<()>;
fn poll(self: Pin<&mut Self>, cx: &mut task::Context<'_>) -> Poll<Self::Output> {
self.poll_watch(cx, &NoopWatcher)
}
}
impl<I: fmt::Debug, S: fmt::Debug> fmt::Debug for Server<I, S> {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
let mut st = f.debug_struct("Server");
st.field("listener", &self.incoming);
st.finish()
}
}
// ===== impl Builder =====
#[cfg_attr(docsrs, doc(cfg(any(feature = "http1", feature = "http2"))))]
impl<I, E> Builder<I, E> {
/// Start a new builder, wrapping an incoming stream and low-level options.
///
/// For a more convenient constructor, see [`Server::bind`](Server::bind).
pub fn new(incoming: I, protocol: Http_<E>) -> Self {
Builder { incoming, protocol }
}
/// Sets whether to use keep-alive for HTTP/1 connections.
///
/// Default is `true`.
#[cfg(feature = "http1")]
#[cfg_attr(docsrs, doc(cfg(feature = "http1")))]
pub fn http1_keepalive(mut self, val: bool) -> Self {
self.protocol.http1_keep_alive(val);
self
}
/// Set whether HTTP/1 connections should support half-closures.
///
/// Clients can chose to shutdown their write-side while waiting
/// for the server to respond. Setting this to `true` will
/// prevent closing the connection immediately if `read`
/// detects an EOF in the middle of a request.
///
/// Default is `false`.
#[cfg(feature = "http1")]
#[cfg_attr(docsrs, doc(cfg(feature = "http1")))]
pub fn http1_half_close(mut self, val: bool) -> Self {
self.protocol.http1_half_close(val);
self
}
/// Set the maximum buffer size.
///
/// Default is ~ 400kb.
#[cfg(feature = "http1")]
#[cfg_attr(docsrs, doc(cfg(feature = "http1")))]
pub fn http1_max_buf_size(mut self, val: usize) -> Self {
self.protocol.max_buf_size(val);
self
}
// Sets whether to bunch up HTTP/1 writes until the read buffer is empty.
//
// This isn't really desirable in most cases, only really being useful in
// silly pipeline benchmarks.
#[doc(hidden)]
#[cfg(feature = "http1")]
pub fn http1_pipeline_flush(mut self, val: bool) -> Self {
self.protocol.pipeline_flush(val);
self
}
/// Set whether HTTP/1 connections should try to use vectored writes,
/// or always flatten into a single buffer.
///
/// Note that setting this to false may mean more copies of body data,
/// but may also improve performance when an IO transport doesn't
/// support vectored writes well, such as most TLS implementations.
///
/// Setting this to true will force hyper to use queued strategy
/// which may eliminate unnecessary cloning on some TLS backends
///
/// Default is `auto`. In this mode hyper will try to guess which
/// mode to use
#[cfg(feature = "http1")]
pub fn http1_writev(mut self, enabled: bool) -> Self {
self.protocol.http1_writev(enabled);
self
}
/// Set whether HTTP/1 connections will write header names as title case at
/// the socket level.
///
/// Note that this setting does not affect HTTP/2.
///
/// Default is false.
#[cfg(feature = "http1")]
#[cfg_attr(docsrs, doc(cfg(feature = "http1")))]
pub fn http1_title_case_headers(mut self, val: bool) -> Self {
self.protocol.http1_title_case_headers(val);
self
}
/// Set whether to support preserving original header cases.
///
/// Currently, this will record the original cases received, and store them
/// in a private extension on the `Request`. It will also look for and use
/// such an extension in any provided `Response`.
///
/// Since the relevant extension is still private, there is no way to
/// interact with the original cases. The only effect this can have now is
/// to forward the cases in a proxy-like fashion.
///
/// Note that this setting does not affect HTTP/2.
///
/// Default is false.
#[cfg(feature = "http1")]
#[cfg_attr(docsrs, doc(cfg(feature = "http1")))]
pub fn http1_preserve_header_case(mut self, val: bool) -> Self {
self.protocol.http1_preserve_header_case(val);
self
}
/// Set a timeout for reading client request headers. If a client does not
/// transmit the entire header within this time, the connection is closed.
///
/// Default is None.
#[cfg(all(feature = "http1", feature = "runtime"))]
#[cfg_attr(docsrs, doc(cfg(all(feature = "http1", feature = "runtime"))))]
pub fn http1_header_read_timeout(mut self, read_timeout: Duration) -> Self {
self.protocol.http1_header_read_timeout(read_timeout);
self
}
/// Sets whether HTTP/1 is required.
///
/// Default is `false`.
#[cfg(feature = "http1")]
#[cfg_attr(docsrs, doc(cfg(feature = "http1")))]
pub fn http1_only(mut self, val: bool) -> Self {
self.protocol.http1_only(val);
self
}
/// Sets whether HTTP/2 is required.
///
/// Default is `false`.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_only(mut self, val: bool) -> Self {
self.protocol.http2_only(val);
self
}
/// Sets the [`SETTINGS_INITIAL_WINDOW_SIZE`][spec] option for HTTP2
/// stream-level flow control.
///
/// Passing `None` will do nothing.
///
/// If not set, hyper will use a default.
///
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_initial_stream_window_size(mut self, sz: impl Into<Option<u32>>) -> Self {
self.protocol.http2_initial_stream_window_size(sz.into());
self
}
/// Sets the max connection-level flow control for HTTP2
///
/// Passing `None` will do nothing.
///
/// If not set, hyper will use a default.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_initial_connection_window_size(mut self, sz: impl Into<Option<u32>>) -> Self {
self.protocol
.http2_initial_connection_window_size(sz.into());
self
}
/// Sets whether to use an adaptive flow control.
///
/// Enabling this will override the limits set in
/// `http2_initial_stream_window_size` and
/// `http2_initial_connection_window_size`.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_adaptive_window(mut self, enabled: bool) -> Self {
self.protocol.http2_adaptive_window(enabled);
self
}
/// Sets the maximum frame size to use for HTTP2.
///
/// Passing `None` will do nothing.
///
/// If not set, hyper will use a default.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_max_frame_size(mut self, sz: impl Into<Option<u32>>) -> Self {
self.protocol.http2_max_frame_size(sz);
self
}
/// Sets the max size of received header frames.
///
/// Default is currently ~16MB, but may change.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_max_header_list_size(mut self, max: u32) -> Self {
self.protocol.http2_max_header_list_size(max);
self
}
/// Sets the [`SETTINGS_MAX_CONCURRENT_STREAMS`][spec] option for HTTP2
/// connections.
///
/// Default is no limit (`std::u32::MAX`). Passing `None` will do nothing.
///
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_max_concurrent_streams(mut self, max: impl Into<Option<u32>>) -> Self {
self.protocol.http2_max_concurrent_streams(max.into());
self
}
/// Sets an interval for HTTP2 Ping frames should be sent to keep a
/// connection alive.
///
/// Pass `None` to disable HTTP2 keep-alive.
///
/// Default is currently disabled.
///
/// # Cargo Feature
///
/// Requires the `runtime` cargo feature to be enabled.
#[cfg(all(feature = "runtime", feature = "http2"))]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_keep_alive_interval(mut self, interval: impl Into<Option<Duration>>) -> Self {
self.protocol.http2_keep_alive_interval(interval);
self
}
/// Sets a timeout for receiving an acknowledgement of the keep-alive ping.
///
/// If the ping is not acknowledged within the timeout, the connection will
/// be closed. Does nothing if `http2_keep_alive_interval` is disabled.
///
/// Default is 20 seconds.
///
/// # Cargo Feature
///
/// Requires the `runtime` cargo feature to be enabled.
#[cfg(all(feature = "runtime", feature = "http2"))]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_keep_alive_timeout(mut self, timeout: Duration) -> Self {
self.protocol.http2_keep_alive_timeout(timeout);
self
}
/// Set the maximum write buffer size for each HTTP/2 stream.
///
/// Default is currently ~400KB, but may change.
///
/// # Panics
///
/// The value must be no larger than `u32::MAX`.
#[cfg(feature = "http2")]
#[cfg_attr(docsrs, doc(cfg(feature = "http2")))]
pub fn http2_max_send_buf_size(mut self, max: usize) -> Self {
self.protocol.http2_max_send_buf_size(max);
self
}
/// Enables the [extended CONNECT protocol].
///
#[cfg(feature = "http2")]
pub fn http2_enable_connect_protocol(mut self) -> Self {
self.protocol.http2_enable_connect_protocol();
self
}
/// Sets the `Executor` to deal with connection tasks.
///
/// Default is `tokio::spawn`.
pub fn executor<E2>(self, executor: E2) -> Builder<I, E2> {
Builder {
incoming: self.incoming,
protocol: self.protocol.with_executor(executor),
}
}
/// Consume this `Builder`, creating a [`Server`](Server).
///
/// # Example
///
/// ```
/// # #[cfg(feature = "tcp")]
/// # async fn run() {
/// use hyper::{Body, Error, Response, Server};
/// use hyper::service::{make_service_fn, service_fn};
///
/// // Construct our SocketAddr to listen on...
/// let addr = ([127, 0, 0, 1], 3000).into();
///
/// // And a MakeService to handle each connection...
/// let make_svc = make_service_fn(|_| async {
/// Ok::<_, Error>(service_fn(|_req| async {
/// Ok::<_, Error>(Response::new(Body::from("Hello World")))
/// }))
/// });
///
/// // Then bind and serve...
/// let server = Server::bind(&addr)
/// .serve(make_svc);
///
/// // Run forever-ish...
/// if let Err(err) = server.await {
/// eprintln!("server error: {}", err);
/// }
/// # }
/// ```
pub fn serve<S, B>(self, make_service: S) -> Server<I, S, E>
where
I: Accept,
I::Error: Into<Box<dyn StdError + Send + Sync>>,
I::Conn: AsyncRead + AsyncWrite + Unpin + Send + 'static,
S: MakeServiceRef<I::Conn, Body, ResBody = B>,
S::Error: Into<Box<dyn StdError + Send + Sync>>,
B: HttpBody + 'static,
B::Error: Into<Box<dyn StdError + Send + Sync>>,
E: NewSvcExec<I::Conn, S::Future, S::Service, E, NoopWatcher>,
E: ConnStreamExec<<S::Service as HttpService<Body>>::Future, B>,
{
Server {
incoming: self.incoming,
make_service,
protocol: self.protocol.clone(),
}
}
}
#[cfg(feature = "tcp")]
#[cfg_attr(
docsrs,
doc(cfg(all(feature = "tcp", any(feature = "http1", feature = "http2"))))
)]
impl<E> Builder<AddrIncoming, E> {
/// Set the duration to remain idle before sending TCP keepalive probes.
///
/// If `None` is specified, keepalive is disabled.
pub fn tcp_keepalive(mut self, keepalive: Option<Duration>) -> Self {
self.incoming.set_keepalive(keepalive);
self
}
/// Set the duration between two successive TCP keepalive retransmissions,
/// if acknowledgement to the previous keepalive transmission is not received.
pub fn tcp_keepalive_interval(mut self, interval: Option<Duration>) -> Self {
self.incoming.set_keepalive_interval(interval);
self
}
/// Set the number of retransmissions to be carried out before declaring that remote end is not available.
pub fn tcp_keepalive_retries(mut self, retries: Option<u32>) -> Self {
self.incoming.set_keepalive_retries(retries);
self
}
/// Set the value of `TCP_NODELAY` option for accepted connections.
pub fn tcp_nodelay(mut self, enabled: bool) -> Self {
self.incoming.set_nodelay(enabled);
self
}
/// Set whether to sleep on accept errors.
///
/// A possible scenario is that the process has hit the max open files
/// allowed, and so trying to accept a new connection will fail with
/// EMFILE. In some cases, it's preferable to just wait for some time, if
/// the application will likely close some files (or connections), and try
/// to accept the connection again. If this option is true, the error will
/// be logged at the error level, since it is still a big deal, and then
/// the listener will sleep for 1 second.
///
/// In other cases, hitting the max open files should be treat similarly
/// to being out-of-memory, and simply error (and shutdown). Setting this
/// option to false will allow that.
///
/// For more details see [`AddrIncoming::set_sleep_on_errors`]
pub fn tcp_sleep_on_accept_errors(mut self, val: bool) -> Self {
self.incoming.set_sleep_on_errors(val);
self
}
}
// Used by `Server` to optionally watch a `Connection` future.
//
// The regular `hyper::Server` just uses a `NoopWatcher`, which does
// not need to watch anything, and so returns the `Connection` untouched.
//
// The `Server::with_graceful_shutdown` needs to keep track of all active
// connections, and signal that they start to shutdown when prompted, so
// it has a `GracefulWatcher` implementation to do that.
pub trait Watcher<I, S: HttpService<Body>, E>: Clone {
type Future: Future<Output = crate::Result<()>>;
fn watch(&self, conn: UpgradeableConnection<I, S, E>) -> Self::Future;
}
#[allow(missing_debug_implementations)]
#[derive(Copy, Clone)]
pub struct NoopWatcher;
impl<I, S, E> Watcher<I, S, E> for NoopWatcher
where
I: AsyncRead + AsyncWrite + Unpin + Send + 'static,
S: HttpService<Body>,
E: ConnStreamExec<S::Future, S::ResBody>,
S::ResBody: 'static,
<S::ResBody as HttpBody>::Error: Into<Box<dyn StdError + Send + Sync>>,
{
type Future = UpgradeableConnection<I, S, E>;
fn watch(&self, conn: UpgradeableConnection<I, S, E>) -> Self::Future {
conn
}
}
// used by exec.rs
pub(crate) mod new_svc {
use std::error::Error as StdError;
use tokio::io::{AsyncRead, AsyncWrite};
use tracing::debug;
use super::{Connecting, Watcher};
use crate::body::{Body, HttpBody};
use crate::common::exec::ConnStreamExec;
use crate::common::{task, Future, Pin, Poll, Unpin};
use crate::service::HttpService;
use pin_project_lite::pin_project;
// This is a `Future<Item=(), Error=()>` spawned to an `Executor` inside
// the `Server`. By being a nameable type, we can be generic over the
// user's `Service::Future`, and thus an `Executor` can execute it.
//
// Doing this allows for the server to conditionally require `Send` futures,
// depending on the `Executor` configured.
//
// Users cannot import this type, nor the associated `NewSvcExec`. Instead,
// a blanket implementation for `Executor<impl Future>` is sufficient.
pin_project! {
#[allow(missing_debug_implementations)]
pub struct NewSvcTask<I, N, S: HttpService<Body>, E, W: Watcher<I, S, E>> {
#[pin]
state: State<I, N, S, E, W>,
}
}
pin_project! {
#[project = StateProj]
pub(super) enum State<I, N, S: HttpService<Body>, E, W: Watcher<I, S, E>> {
Connecting {
#[pin]
connecting: Connecting<I, N, E>,
watcher: W,
},
Connected {
#[pin]
future: W::Future,
},
}
}
impl<I, N, S: HttpService<Body>, E, W: Watcher<I, S, E>> NewSvcTask<I, N, S, E, W> {
pub(super) fn new(connecting: Connecting<I, N, E>, watcher: W) -> Self {
NewSvcTask {
state: State::Connecting {
connecting,
watcher,
},
}
}
}
impl<I, N, S, NE, B, E, W> Future for NewSvcTask<I, N, S, E, W>
where
I: AsyncRead + AsyncWrite + Unpin + Send + 'static,
N: Future<Output = Result<S, NE>>,
NE: Into<Box<dyn StdError + Send + Sync>>,
S: HttpService<Body, ResBody = B>,
B: HttpBody + 'static,
B::Error: Into<Box<dyn StdError + Send + Sync>>,
E: ConnStreamExec<S::Future, B>,
W: Watcher<I, S, E>,
{
type Output = ();
fn poll(self: Pin<&mut Self>, cx: &mut task::Context<'_>) -> Poll<Self::Output> {
// If it weren't for needing to name this type so the `Send` bounds
// could be projected to the `Serve` executor, this could just be
// an `async fn`, and much safer. Woe is me.
let mut me = self.project();
loop {
let next = {
match me.state.as_mut().project() {
StateProj::Connecting {
connecting,
watcher,
} => {
let res = ready!(connecting.poll(cx));
let conn = match res {
Ok(conn) => conn,
Err(err) => {
let err = crate::Error::new_user_make_service(err);
debug!("connecting error: {}", err);
return Poll::Ready(());
}
};
let future = watcher.watch(conn.with_upgrades());
State::Connected { future }
}
StateProj::Connected { future } => {
return future.poll(cx).map(|res| {
if let Err(err) = res {
debug!("connection error: {}", err);
}
});
}
}
};
me.state.set(next);
}
}
}
}
pin_project! {
/// A future building a new `Service` to a `Connection`.
///
/// Wraps the future returned from `MakeService` into one that returns
/// a `Connection`.
#[must_use = "futures do nothing unless polled"]
#[derive(Debug)]
#[cfg_attr(docsrs, doc(cfg(any(feature = "http1", feature = "http2"))))]
pub struct Connecting<I, F, E = Exec> {
#[pin]
future: F,
io: Option<I>,
protocol: Http_<E>,
}
}
impl<I, F, S, FE, E, B> Future for Connecting<I, F, E>
where
I: AsyncRead + AsyncWrite + Unpin,
F: Future<Output = Result<S, FE>>,
S: HttpService<Body, ResBody = B>,
B: HttpBody + 'static,
B::Error: Into<Box<dyn StdError + Send + Sync>>,
E: ConnStreamExec<S::Future, B>,
{
type Output = Result<Connection<I, S, E>, FE>;
fn poll(self: Pin<&mut Self>, cx: &mut task::Context<'_>) -> Poll<Self::Output> {
let mut me = self.project();
let service = ready!(me.future.poll(cx))?;
let io = Option::take(&mut me.io).expect("polled after complete");
Poll::Ready(Ok(me.protocol.serve_connection(io, service)))
}
}