Source code
Revision control
Copy as Markdown
Other Tools
/*
* Copyright (c) 2006 Smartjog S.A.S, Baptiste Coudurier <baptiste.coudurier@gmail.com>
* Copyright (c) 2011-2012 Smartjog S.A.S, Clément Bœsch <clement.boesch@smartjog.com>
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
/**
* @file
* Timecode helpers header
*/
#ifndef AVUTIL_TIMECODE_H
#define AVUTIL_TIMECODE_H
#include <stdint.h>
#include "rational.h"
#define AV_TIMECODE_STR_SIZE 23
enum AVTimecodeFlag {
AV_TIMECODE_FLAG_DROPFRAME = 1<<0, ///< timecode is drop frame
AV_TIMECODE_FLAG_24HOURSMAX = 1<<1, ///< timecode wraps after 24 hours
AV_TIMECODE_FLAG_ALLOWNEGATIVE = 1<<2, ///< negative time values are allowed
};
typedef struct {
int start; ///< timecode frame start (first base frame number)
uint32_t flags; ///< flags such as drop frame, +24 hours support, ...
AVRational rate; ///< frame rate in rational form
unsigned fps; ///< frame per second; must be consistent with the rate field
} AVTimecode;
/**
* Adjust frame number for NTSC drop frame time code.
*
* @param framenum frame number to adjust
* @param fps frame per second, multiples of 30
* @return adjusted frame number
* @warning adjustment is only valid for multiples of NTSC 29.97
*/
int av_timecode_adjust_ntsc_framenum2(int framenum, int fps);
/**
* Convert frame number to SMPTE 12M binary representation.
*
* @param tc timecode data correctly initialized
* @param framenum frame number
* @return the SMPTE binary representation
*
* See SMPTE ST 314M-2005 Sec 4.4.2.2.1 "Time code pack (TC)"
* the format description as follows:
* bits 0-5: hours, in BCD(6bits)
* bits 6: BGF1
* bits 7: BGF2 (NTSC) or FIELD (PAL)
* bits 8-14: minutes, in BCD(7bits)
* bits 15: BGF0 (NTSC) or BGF2 (PAL)
* bits 16-22: seconds, in BCD(7bits)
* bits 23: FIELD (NTSC) or BGF0 (PAL)
* bits 24-29: frames, in BCD(6bits)
* bits 30: drop frame flag (0: non drop, 1: drop)
* bits 31: color frame flag (0: unsync mode, 1: sync mode)
* @note BCD numbers (6 or 7 bits): 4 or 5 lower bits for units, 2 higher bits for tens.
* @note Frame number adjustment is automatically done in case of drop timecode,
* you do NOT have to call av_timecode_adjust_ntsc_framenum2().
* @note The frame number is relative to tc->start.
* @note Color frame (CF) and binary group flags (BGF) bits are set to zero.
*/
uint32_t av_timecode_get_smpte_from_framenum(const AVTimecode *tc, int framenum);
/**
* Convert sei info to SMPTE 12M binary representation.
*
* @param rate frame rate in rational form
* @param drop drop flag
* @param hh hour
* @param mm minute
* @param ss second
* @param ff frame number
* @return the SMPTE binary representation
*/
uint32_t av_timecode_get_smpte(AVRational rate, int drop, int hh, int mm, int ss, int ff);
/**
* Load timecode string in buf.
*
* @param tc timecode data correctly initialized
* @param buf destination buffer, must be at least AV_TIMECODE_STR_SIZE long
* @param framenum frame number
* @return the buf parameter
*
* @note Timecode representation can be a negative timecode and have more than
* 24 hours, but will only be honored if the flags are correctly set.
* @note The frame number is relative to tc->start.
*/
char *av_timecode_make_string(const AVTimecode *tc, char *buf, int framenum);
/**
* Get the timecode string from the SMPTE timecode format.
*
* In contrast to av_timecode_make_smpte_tc_string this function supports 50/60
* fps timecodes by using the field bit.
*
* @param buf destination buffer, must be at least AV_TIMECODE_STR_SIZE long
* @param rate frame rate of the timecode
* @param tcsmpte the 32-bit SMPTE timecode
* @param prevent_df prevent the use of a drop flag when it is known the DF bit
* is arbitrary
* @param skip_field prevent the use of a field flag when it is known the field
* bit is arbitrary (e.g. because it is used as PC flag)
* @return the buf parameter
*/
char *av_timecode_make_smpte_tc_string2(char *buf, AVRational rate, uint32_t tcsmpte, int prevent_df, int skip_field);
/**
* Get the timecode string from the SMPTE timecode format.
*
* @param buf destination buffer, must be at least AV_TIMECODE_STR_SIZE long
* @param tcsmpte the 32-bit SMPTE timecode
* @param prevent_df prevent the use of a drop flag when it is known the DF bit
* is arbitrary
* @return the buf parameter
*/
char *av_timecode_make_smpte_tc_string(char *buf, uint32_t tcsmpte, int prevent_df);
/**
* Get the timecode string from the 25-bit timecode format (MPEG GOP format).
*
* @param buf destination buffer, must be at least AV_TIMECODE_STR_SIZE long
* @param tc25bit the 25-bits timecode
* @return the buf parameter
*/
char *av_timecode_make_mpeg_tc_string(char *buf, uint32_t tc25bit);
/**
* Init a timecode struct with the passed parameters.
*
* @param tc pointer to an allocated AVTimecode
* @param rate frame rate in rational form
* @param flags miscellaneous flags such as drop frame, +24 hours, ...
* (see AVTimecodeFlag)
* @param frame_start the first frame number
* @param log_ctx a pointer to an arbitrary struct of which the first field
* is a pointer to an AVClass struct (used for av_log)
* @return 0 on success, AVERROR otherwise
*/
int av_timecode_init(AVTimecode *tc, AVRational rate, int flags, int frame_start, void *log_ctx);
/**
* Init a timecode struct from the passed timecode components.
*
* @param tc pointer to an allocated AVTimecode
* @param rate frame rate in rational form
* @param flags miscellaneous flags such as drop frame, +24 hours, ...
* (see AVTimecodeFlag)
* @param hh hours
* @param mm minutes
* @param ss seconds
* @param ff frames
* @param log_ctx a pointer to an arbitrary struct of which the first field
* is a pointer to an AVClass struct (used for av_log)
* @return 0 on success, AVERROR otherwise
*/
int av_timecode_init_from_components(AVTimecode *tc, AVRational rate, int flags, int hh, int mm, int ss, int ff, void *log_ctx);
/**
* Parse timecode representation (hh:mm:ss[:;.]ff).
*
* @param tc pointer to an allocated AVTimecode
* @param rate frame rate in rational form
* @param str timecode string which will determine the frame start
* @param log_ctx a pointer to an arbitrary struct of which the first field is a
* pointer to an AVClass struct (used for av_log).
* @return 0 on success, AVERROR otherwise
*/
int av_timecode_init_from_string(AVTimecode *tc, AVRational rate, const char *str, void *log_ctx);
/**
* Check if the timecode feature is available for the given frame rate
*
* @return 0 if supported, <0 otherwise
*/
int av_timecode_check_frame_rate(AVRational rate);
#endif /* AVUTIL_TIMECODE_H */